This patch allows immediates (and CSR alias immediates) which start with
a tilde token or an exclaim (!) token to be parsed as intended.
Differential Revision: https://reviews.llvm.org/D57320
llvm-svn: 363783
Since the parser attempts to parse an operand as a register with
parentheses before parsing it as an immediate, immediates in
parentheses should not be parsed by parseRegister. However in the case
where the immediate does not start with an identifier, the LParen is not
unlexed and so the RParen causes an unexpected token error.
This patch adds the missing UnLex, and modifies the existing UnLex to
not use a buffered token, as it should always be unlexing an LParen.
Differential Revision: https://reviews.llvm.org/D57319
llvm-svn: 363782
This patch adds lowering for global TLS addresses for the TLS models of
InitialExec, GlobalDynamic, LocalExec and LocalDynamic.
LocalExec support required using a 4-operand add instruction, which uses
the fourth operand to express a relocation on the symbol. The necessary
fixup is emitted when the instruction is emitted.
Differential Revision: https://reviews.llvm.org/D55305
llvm-svn: 363771
Summary:
DAGCombine will normally turn a `(shl (add x, c1), c2)` into `(add (shl x, c2), c1 << c2)`, where `c1` and `c2` are constants. This can be prevented by a callback in TargetLowering.
On RISC-V, materialising the constant `c1 << c2` can be more expensive than materialising `c1`, because materialising the former may take more instructions, and may use a register, where materialising the latter would not.
This patch implements the hook in RISCVTargetLowering to prevent this transform, in the cases where:
- `c1` fits into the immediate field in an `addi` instruction.
- `c1` takes fewer instructions to materialise than `c1 << c2`.
In future, DAGCombine could do the check to see whether `c1` fits into an add immediate, which might simplify more targets hooks than just RISC-V.
Reviewers: asb, luismarques, efriedma
Reviewed By: asb
Subscribers: xbolva00, lebedev.ri, craig.topper, lewis-revill, Jim, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62857
llvm-svn: 363736
This patch adds support for generating calls through the procedure
linkage table where required for a given ExternalSymbol or GlobalAddress
callee.
Differential Revision: https://reviews.llvm.org/D55304
llvm-svn: 363686
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
In order to generate correct debug frame information, it needs to
generate CFI information in prologue and epilog.
Differential Revision: https://reviews.llvm.org/D61773
llvm-svn: 363120
This patch allows lowering of PIC addresses by using PC-relative
addressing for DSO-local symbols and accessing the address through the
global offset table for non-DSO-local symbols.
Differential Revision: https://reviews.llvm.org/D55303
llvm-svn: 363058
This validates and lowers arguments to inline asm nodes which have the
constraints I, J & K, with the following semantics (equivalent to GCC):
I: Any 12-bit signed immediate.
J: Immediate integer zero only.
K: Any 5-bit unsigned immediate.
Differential Revision: https://reviews.llvm.org/D54093
llvm-svn: 363054
This reverts r362990 (git commit 374571301d)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
Summary:
This allows some integer bitwise operations to instead be performed by
hardware fp instructions. This is correct because the RISC-V spec
requires the F and D extensions to use the IEEE-754 standard
representation, and fp register loads and stores to be bit-preserving.
This is tested against the soft-float ABI, but with hardware float
extensions enabled, so that the tests also ensure the optimisation also
fires in this case.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62900
llvm-svn: 362790
This patch adds the pseudo instructions la.tls.ie and la.tls.gd, used in
the initial-exec and global-dynamic TLS models respectively when
addressing a global. The pseudo instructions are expanded in the
assembly parser.
llvm-svn: 361499
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360732
For some targets, there is a circular dependency between InstPrinter and
MCTargetDesc. Merging them together will fix this. For the other targets,
the merging is to maintain consistency so all targets will have the same
structure
llvm-svn: 360505
This patch adds support for parsing and assembling the %tls_ie_pcrel_hi
and %tls_gd_pcrel_hi modifiers.
Differential Revision: https://reviews.llvm.org/D55342
llvm-svn: 358994
When not optimizing for minimum size (-Oz) we custom lower wide shifts
(SHL_PARTS, SRA_PARTS, SRL_PARTS) instead of expanding to a libcall.
Differential Revision: https://reviews.llvm.org/D59477
llvm-svn: 358498
RISCVMCCodeEmitter::expandAddTPRel asserts that the second operand must be
x4/tp. As we are not currently checking this in the RISCVAsmParser, the assert
is easy to trigger due to wrong assembly input.
This patch does a late check of this constraint.
An alternative could be using a singleton register class for x4/tp similar to
the current one for sp. Unfortunately it does not result in a good diagnostic.
Because add is an overloaded mnemonic, if no matching is possible, the
diagnostic of the first failing alternative seems to be used as the diagnostic
itself. This means that this case the %tprel_add is diagnosed as an invalid
operand (because the real add instruction only has 3 operands).
Differential Revision: https://reviews.llvm.org/D60528
llvm-svn: 358183
Because of gp = sdata_start_address + 0x800, gp with signed twelve-bit offset
could covert most of the small data section. Linker relaxation could transfer
the multiple data accessing instructions to a gp base with signed twelve-bit
offset instruction.
Differential Revision: https://reviews.llvm.org/D57493
llvm-svn: 358150
Summary:
The InlineAsm::AsmDialect is only required for X86; no architecture
makes use of it and as such it gets passed around between arch-specific
and general code while being unused for all architectures but X86.
Since the AsmDialect is queried from a MachineInstr, which we also pass
around, remove the additional AsmDialect parameter and query for it deep
in the X86AsmPrinter only when needed/as late as possible.
This refactor should help later planned refactors to AsmPrinter, as this
difference in the X86AsmPrinter makes it harder to make AsmPrinter more
generic.
Reviewers: craig.topper
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, llvm-commits, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60488
llvm-svn: 358101
This patch adds support in the MC layer for parsing and assembling the
4-operand add instruction needed for TLS addressing. This also involves
parsing the %tprel_hi, %tprel_lo and %tprel_add operand modifiers.
Differential Revision: https://reviews.llvm.org/D55341
llvm-svn: 357698
This patch allows symbols appended with @plt to parse and assemble with the
R_RISCV_CALL_PLT relocation.
Differential Revision: https://reviews.llvm.org/D55335
Patch by Lewis Revill.
llvm-svn: 357470
This patch replaces the addition of VK_RISCV_CALL in RISCVMCCodeEmitter by
creating the RISCVMCExpr when tail/call are parsed, or in the codegen case
when the callee symbols are created.
This required adding a new CallSymbol operand to allow only adding
VK_RISCV_CALL to tail/call instructions.
This patch will allow further expansion of parsing and codegen to easily
include PLT symbols which must generate the R_RISCV_CALL_PLT relocation.
Differential Revision: https://reviews.llvm.org/D55560
Patch by Lewis Revill.
llvm-svn: 357396
This patch adds an implementation of a PC-relative addressing sequence to be
used when -mcmodel=medium is specified. With absolute addressing, a 'medium'
codemodel may cause addresses to be out of range. This is because while
'medium' implies a 2 GiB addressing range, this 2 GiB can be at any offset as
opposed to 'small', which implies the first 2 GiB only.
Note that LLVM/Clang currently specifies code models differently to GCC, where
small and medium imply the same functionality as GCC's medlow and medany
respectively.
Differential Revision: https://reviews.llvm.org/D54143
Patch by Lewis Revill.
llvm-svn: 357393
Adds a `seto` pattern expansion. Without it the lowerings of `fcmp one` and
`fcmp ord` would be inefficient due to an unoptimized double negation.
Differential Revision: https://reviews.llvm.org/D59699
llvm-svn: 357378
A pcrel_lo will point to the associated pcrel_hi fixup which in turn points to
the real target. RISCVMCExpr::evaluatePCRelLo will work around this
indirection in order to allow the fixup to be evaluate properly. However, if
relocations are forced (e.g. due to linker relaxation is enabled) then its
evaluation is undesired and will result in a relocation with the wrong target.
This patch modifies evaluatePCRelLo so it will not try to evaluate if the
fixup will be forced as a relocation. A new helper method is added to
RISCVAsmBackend to query this.
Differential Revision: https://reviews.llvm.org/D59686
llvm-svn: 357374
This patch adds support for the RISC-V hard float ABIs, building on top of
rL355771, which added basic target-abi parsing and MC layer support. It also
builds on some re-organisations and expansion of the upstream ABI and calling
convention tests which were recently committed directly upstream.
A number of aspects of the RISC-V float hard float ABIs require frontend
support (e.g. flattening of structs and passing int+fp for fp+fp structs in a
pair of registers), and will be addressed in a Clang patch.
As can be seen from the tests, it would be worthwhile extending
RISCVMergeBaseOffsets to handle constant pool as well as global accesses.
Differential Revision: https://reviews.llvm.org/D59357
llvm-svn: 357352
The SplitF64 node is used on RV32D to convert an f64 directly to a pair of i32
(necessary as bitcasting to i64 isn't legal). When performed on a ConstantFP,
this will result in a FP load from the constant pool followed by a store to
the stack and two integer loads from the stack (necessary as there is no way
to directly move between f64 FPRs and i32 GPRs on RV32D). It's always cheaper
to just materialise integers for the lo and hi parts of the FP constant, so do
that instead.
llvm-svn: 357341
Adds two patterns to improve the codegen of GPR value comparisons with small
constants. Instead of first loading the constant into another register and then
doing an XOR of those registers, these patterns directly use the constant as an
XORI immediate.
llvm-svn: 356990
The RISC-V ISA defines RV32E as an alternative "base" instruction set
encoding, that differs from RV32I by having only 16 rather than 32 registers.
This patch adds basic definitions for RV32E as well as MC layer support
(assembling, disassembling) and tests. The only supported ABI on RV32E is
ILP32E.
Add a new RISCVFeatures::validate() helper to RISCVUtils which can be called
from codegen or MC layer libraries to validate the combination of TargetTriple
and FeatureBitSet. Other targets have similar checks (e.g. erroring if SPE is
enabled on PPC64 or oddspreg + o32 ABI on Mips), but they either duplicate the
checks (Mips), or fail to check for both codegen and MC codepaths (PPC).
Codegen for the ILP32E ABI support and RV32E codegen are left for a future
patch/patches.
Differential Revision: https://reviews.llvm.org/D59470
llvm-svn: 356744
This patch optimizes the emission of a sequence of SELECTs with the same
condition, avoiding the insertion of unnecessary control flow. Such a sequence
often occurs when a SELECT of values wider than XLEN is legalized into two
SELECTs with legal types. We have identified several use cases where the
SELECTs could be interleaved with other instructions. Therefore, we extend the
sequence to include non-SELECT instructions if we are able to detect that the
non-SELECT instructions do not impact the optimization.
This patch supersedes https://reviews.llvm.org/D59096, which attempted to
address this issue by introducing a new SelectionDAG node. Hat tip to Eli
Friedman for his feedback on how to best handle this issue.
Differential Revision: https://reviews.llvm.org/D59355
Patch by Luís Marques.
llvm-svn: 356741
Indicates in the TargetLowering interface that conversions from CC logic to
bitwise logic are allowed. Adds tests that show the benefit when optimization
opportunities are detected. Also adds tests that show that when the optimization
is not applied correct code is generated (but opportunities for other
optimizations remain).
Differential Revision: https://reviews.llvm.org/D59596
Patch by Luís Marques.
llvm-svn: 356740
RISCVAsmParser::ParseRegister is called from AsmParser::parseRegisterOrNumber,
which in turn is called when processing CFI directives. The RISC-V
implementation wasn't setting RegNo, and so was incorrect. This patch address
that and adds cfi directive tests that demonstrate the fix. A follow-up patch
will factor out the register parsing logic shared between ParseRegister and
parseRegister.
llvm-svn: 356329
The CSR renaming further prepares the way for an upcoming patch adding support for more
RISC-V ABIs.
Modify RISCVRegisterInfo::getCalleeSavedRegs and
RISCVRegisterInfo::getReservedRegs to do MF->getSubtarget<RISCVSubtarget>()
once rather than multiple times.
llvm-svn: 356123
This follows similar logic in the ARM and Mips backends, and allows the free
use of s0 in functions without a dedicated frame pointer. The changes in
callee-saved-gprs.ll most clearly show the effect of this patch.
llvm-svn: 356063
RISCVDisassembler was incorrectly using sizeof(Arr) when it should have used
sizeof(Arr)/sizeof(Arr[0]). Update to use array_lengthof instead.
llvm-svn: 356035
If a symbol points to the end of a fragment, instead of searching for
fixups in that fragment, search in the next fragment.
Fixes spurious assembler error with subtarget change next to "la"
pseudo-instruction, or expanded equivalent.
Alternate proposal to fix the problem discussed in
https://reviews.llvm.org/D58759.
Testcase by Ana Pazos.
Differential Revision: https://reviews.llvm.org/D58943
llvm-svn: 355946
AtomicCmpSwapWithSuccess is legalised into an AtomicCmpSwap plus a comparison.
This requires an extension of the value which, by default, is a
zero-extension. When we later lower AtomicCmpSwap into a PseudoCmpXchg32 and then expanded in
RISCVExpandPseudoInsts.cpp, the lr.w instruction does a sign-extension.
This mismatch of extensions causes the comparison to fail when the compared
value is negative. This change overrides TargetLowering::getExtendForAtomicOps
for RISC-V so it does a sign-extension instead.
Differential Revision: https://reviews.llvm.org/D58829
Patch by Ferran Pallarès Roca.
llvm-svn: 355869
The RISC-V Assembly Programmer's Manual defines fp as another alias of x8.
However, our tablegen rules only recognise s0. This patch adds fp as another
alias of x8. GCC also accepts fp.
Differential Revision: https://reviews.llvm.org/D59209
Patch by Ferran Pallarès Roca.
llvm-svn: 355867
This patch adds proper handling of -target-abi, as accepted by llvm-mc and
llc. Lowering (codegen) for the hard-float ABIs will follow in a subsequent
patch. However, this patch does add MC layer support for the hard float and
RVE ABIs (emission of the appropriate ELF flags
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#-file-header).
ABI parsing must be shared between codegen and the MC layer, so we add
computeTargetABI to RISCVUtils. A warning will be printed if an invalid or
unrecognized ABI is given.
Differential Revision: https://reviews.llvm.org/D59023
llvm-svn: 355771
Summary:
Floating-point CSRs should be accessible even when F extension is not enabled.
But pseudo instructions that access floating point CSRs still require the F extension.
GNU tools already implement this behavior. RISC-V spec is pending update to reflect
this behavior and to extend it to pseudo instructions that access floating point CSRs.
Reviewers: asb
Reviewed By: asb
Subscribers: asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, llvm-commits
Differential Revision: https://reviews.llvm.org/D58932
llvm-svn: 355753
Allow load/store instructions with implied zero offset for compatibility with
GNU assembler.
Differential Revision: https://reviews.llvm.org/D57141
Patch by James Clarke.
llvm-svn: 354581
Lewis Revill