This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
[Re-applies r363725 without changes after fixing a broken testcase.]
llvm-svn: 363731
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
llvm-svn: 363725
Recommit of D32530 with a few small changes:
- Stopped recursively walking through aggregates in
the verifier, so that we don't impose too much
overhead on large modules under LTO (see PR42210).
- Changed tests to match; the errors are slightly
different since they only report the array or
struct that actually contains a scalable vector,
rather than all aggregates which contain one in
a nested member.
- Corrected an older comment
Reviewers: thakis, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 363658
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
llvm-svn: 363635
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363415
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363328
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
Extend the mechanism to overload intrinsic arguments by using either
backward or forward references to the overloadable arguments.
In for example:
def int_something : Intrinsic<[LLVMPointerToElt<0>],
[llvm_anyvector_ty], []>;
LLVMPointerToElt<0> is a forward reference to the overloadable operand
of type 'llvm_anyvector_ty' and would allow intrinsics such as:
declare i32* @llvm.something.v4i32(<4 x i32>);
declare i64* @llvm.something.v2i64(<2 x i64>);
where the result pointer type is deduced from the element type of the
first argument.
If the returned pointer is not a pointer to the element type, LLVM will
give an error:
Intrinsic has incorrect return type!
i64* (<4 x i32>)* @llvm.something.v4i32
Reviewers: RKSimon, arsenm, rnk, greened
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62995
llvm-svn: 363233
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
Most parts of LLVM don't care whether the byval type is derived from an
explicit Attribute or from the parameter's pointee type, so it makes
sense for the main access function to just return the right value.
The very few users who do care (only BitcodeReader so far) can find out
how it's specified by accessing the Attribute directly.
llvm-svn: 362642
This patch allows current users of Value::stripPointerCasts() to force
the result of the function to have the same representation as the value
it was called on. This is useful in various cases, e.g., (non-)null
checks.
In this patch only a single call site was adjusted to fix an existing
misuse that would cause nonnull where they may be wrong. Uses in
attribute deduction and other areas, e.g., D60047, are to be expected.
For a discussion on this topic, please see [0].
[0] http://lists.llvm.org/pipermail/llvm-dev/2018-December/128423.html
Reviewers: hfinkel, arsenm, reames
Subscribers: wdng, hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61607
llvm-svn: 362545
While prof branch_weights inconsistencies are being fixed patch
by patch (pass by pass) we need SwitchInstProfUpdateWrapper to
be safe with respect to inconsistent metadata that can come from
passes that have not been fixed yet. See the bug found by @nikic
in https://reviews.llvm.org/D62126.
This patch introduces one more state (called Invalid) to the
wrapper class that allows users to work with the underlying
SwitchInst ignoring the prof metadata changes.
Created a unit test for the SwitchInstProfUpdateWrapper class.
Reviewers: davidx, nikic, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D62656
llvm-svn: 362473
The implementation is conceptually simple: We separate the LHS and
RHS into positive and negative components and then also compute the
positive and negative components of the result, taking into account
that e.g. only pos/pos and neg/neg will give a positive result.
However, there's one significant complication: SignedMin / -1 is UB
for sdiv, and we can't just ignore it, because the APInt result of
SignedMin would break the sign segregation. Instead we drop SignedMin
or -1 from the corresponding ranges, taking into account some edge
cases with wrapped ranges.
Because of the sign segregation, the implementation ends up being
nearly fully precise even for wrapped ranges (the remaining
imprecision is due to ranges that are both signed and unsigned
wrapping and are divided by a trivial divisor like 1). This means
that the testing cannot just check the signed envelope as we
usually do. Instead we collect all possible results in a bitvector
and construct a better sign wrapped range (than the full envelope).
Differential Revision: https://reviews.llvm.org/D61238
llvm-svn: 362430
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
llvm-svn: 362160
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362012
* Adds a 'scalable' flag to VectorType
* Adds an 'ElementCount' class to VectorType to pass (possibly scalable) vector lengths, with overloaded operators.
* Modifies existing helper functions to use ElementCount
* Adds support for serializing/deserializing to/from both textual and bitcode IR formats
* Extends the verifier to reject global variables of scalable types
* Updates documentation
See the latest version of the RFC here: http://lists.llvm.org/pipermail/llvm-dev/2018-July/124396.html
Reviewers: rengolin, lattner, echristo, chandlerc, hfinkel, rkruppe, samparker, SjoerdMeijer, greened, sebpop
Reviewed By: hfinkel, sebpop
Differential Revision: https://reviews.llvm.org/D32530
llvm-svn: 361953
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
In order to fold an always overflowing signed saturating add/sub,
we need to know in which direction the always overflow occurs.
This patch splits up AlwaysOverflows into AlwaysOverflowsLow and
AlwaysOverflowsHigh to pass through this information (but it is
not used yet).
Differential Revision: https://reviews.llvm.org/D62463
llvm-svn: 361858
Based on the suggestion in D62447, this adds a SaturatingInst class
that represents the saturating add/sub family of intrinsics. It
exposes the same interface as WithOverflowInst, for this reason I
have also added a common base class BinaryOpIntrinsic that holds the
actual implementation code and will be useful in some places handling
both overflowing and saturating math.
Differential Revision: https://reviews.llvm.org/D62466
llvm-svn: 361857
The guaranteed no-wrap region is never empty, it always contains at
least zero, so these optimizations don't ever apply.
To make this more obviously true, replace the conversative return
in makeGNWR with an assertion.
llvm-svn: 361698
This patch introduces a wrapper class that re-implements
several mutator methods of SwitchInst to handle changes
of prof branch_weights metadata along with remove/add
switch case methods.
Subsequent patches will use this wrapper to implement
prof branch_weights metadata handling for SwitchInst.
Reviewers: davidx, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D62122
llvm-svn: 361596
Add an intrinsic that takes 2 signed integers with the scale of them provided
as the third argument and performs fixed point multiplication on them. The
result is saturated and clamped between the largest and smallest representable
values of the first 2 operands.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55720
llvm-svn: 361289
We shouldn't really make assumptions about possible sizes for long and long long. And longer term we should probably support vectorizing these intrinsics. By making the result types not fixed we can support vectors as well.
Differential Revision: https://reviews.llvm.org/D62026
llvm-svn: 361169
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
The scalar start/accumulator value of the fadd- and fmul reduction
should match the result type of the reduction, as well as the vector
element-type of the input vector. Although this was not explicitly
specified in the LangRef, it was taken for granted in code implementing
the reductions. The patch also fixes the LangRef by adding this
constraint.
Reviewed By: aemerson, nikic
Differential Revision: https://reviews.llvm.org/D60260
llvm-svn: 361133
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
The new fptrunc and fpext intrinsics are constrained versions of the
regular fptrunc and fpext instructions.
Reviewed by: Andrew Kaylor, Craig Topper, Cameron McInally, Conner Abbot
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D55897
llvm-svn: 360581
Summary:
We hit undefined references building with ThinLTO when one source file
contained explicit instantiations of a template method (weak_odr) but
there were also implicit instantiations in another file (linkonce_odr),
and the latter was the prevailing copy. In this case the symbol was
marked hidden when the prevailing linkonce_odr copy was promoted to
weak_odr. It led to unsats when the resulting shared library was linked
with other code that contained a reference (expecting to be resolved due
to the explicit instantiation).
Add a CanAutoHide flag to the GV summary to allow the thin link to
identify when all copies are eligible for auto-hiding (because they were
all originally linkonce_odr global unnamed addr), and only do the
auto-hide in that case.
Most of the changes here are due to plumbing the new flag through the
bitcode and llvm assembly, and resulting test changes. I augmented the
existing auto-hide test to check for this situation.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, dexonsmith, arphaman, dang, llvm-commits, steven_wu, wmi
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59709
llvm-svn: 360466
Compute results in more direct ways, avoid subset intersect
operations. Extract the core code for computing mul nowrap ranges
into separate static functions, so they can be reused.
llvm-svn: 360189
DWARF5, 2.12 20ff says that
Any debugging information entry representing a pointer or reference
type [may have a DW_AT_address_class attribute].
The existing code (https://reviews.llvm.org/D29670) seems to take a
quite literal interpretation of that wording. I don't see a reason why
an rvalue reference isn't a reference type in the spirit of that
paragraph. This patch allows rvalue references to also have address
spaces.
rdar://problem/50511483
Differential Revision: https://reviews.llvm.org/D61625
llvm-svn: 360176
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
llvm-svn: 360108
Add support for srem() to ConstantRange so we can use it in LVI. For
srem the sign of the result matches the sign of the LHS. For the RHS
only the absolute value is important. Apart from that the logic is
like urem.
Just like for urem this is only an approximate implementation. The tests
check a few specific cases and run an exhaustive test for conservative
correctness (but not exactness).
Differential Revision: https://reviews.llvm.org/D61207
llvm-svn: 360055
Thus it does not assume that the old basic block is the basic block
for which we are looking at successors.
Not reviewed, but seems rather trivial, in line with the rest of
previous few patches.
llvm-svn: 359997
Summary:
It is a common thing to loop over every `PHINode` in some `BasicBlock`
and change old `BasicBlock` incoming block to a new `BasicBlock` incoming block.
`replaceSuccessorsPhiUsesWith()` already had code to do that,
it just wasn't a function.
So outline it into a new function, and use it.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61013
llvm-svn: 359996
Summary:
There is `PHINode::getBasicBlockIndex()`, `PHINode::setIncomingBlock()`
and `PHINode::getNumOperands()`, but no function to replace every
specified `BasicBlock*` predecessor with some other specified `BasicBlock*`.
Clearly, there are a lot of places that could use that functionality.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61011
llvm-svn: 359995
Summary:
There is `Instruction::getNumSuccessors()`, `Instruction::getSuccessor()`
and `Instruction::setSuccessor()`, but no function to replace every
specified `BasicBlock*` successor with some other specified `BasicBlock*`.
I've found one place where it should clearly be used.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61010
llvm-svn: 359994
Summary:
Remove duplicate checks that both operands have the same type. This is checked
before the switch.
Use 'integer' or 'floating-point' instead of 'arithmetic' type. I think this
might be a leftover to the days when floating point and integer operations
shared the same opcodes.
Reviewers: spatel, RKSimon, dblaikie
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61558
llvm-svn: 359985
Fangrui Song