These functions have been legacy leftovers which we used before the
official C++ bindings existed. As all uses of these legacy functions
have been removed, this polly-specific extension can also be dropped.
llvm-svn: 331130
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
Found by opening config.h.cmake in vim, finding all defined macros with
/define\(01\)\? \zs[A-Za-z0-9_]*<cr>
:%s//\=setreg('A', submatch(0), 'V')/gn<cr>
:put A<cr>
and then joining them all with |, and passing that to
git grep -E that_pattern 'clang/*.h' 'clang/*.cpp' 'clang/*.c'
and diffing that output with the result of
git grep Config/config.h 'clang/*.h' 'clang/*.cpp' 'clang/*.c'
No intended behavior change.
llvm-svn: 331124
Summary: Add bindings to create import declarations for modules, functions, types, and other entities. This wraps the conveniences available in the existing DIBuilder API, but these seem C++-specific.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46167
llvm-svn: 331123
Many of these aliases exist to give one syntax or the other a slightly different mnemonic and the other variant gets a duplicate of its normal mnemonic
This patch restricts a lot of these to only one variant so we don't get the duplication.
This removes a lot of duplicate entries from the matcher table. It also reduces the number of warnings printed when you enable the ambiguous match warning in tablegen.
llvm-svn: 331117
Summary:
Previously, a extending load was represented at (G_*EXT (G_LOAD x)).
This had a few drawbacks:
* G_LOAD had to be legal for all sizes you could extend from, even if
registers didn't naturally hold those sizes.
* All sizes you could extend from had to be allocatable just in case the
extend went missing (e.g. by optimization).
* At minimum, G_*EXT and G_TRUNC had to be legal for these sizes. As we
improve optimization of extends and truncates, this legality requirement
would spread without considerable care w.r.t when certain combines were
permitted.
* The SelectionDAG importer required some ugly and fragile pattern
rewriting to translate patterns into this style.
This patch begins changing the representation to:
* (G_[SZ]EXTLOAD x)
* (G_LOAD x) any-extends when MMO.getSize() * 8 < ResultTy.getSizeInBits()
which resolves these issues by allowing targets to work entirely in their
native register sizes, and by having a more direct translation from
SelectionDAG patterns.
This patch introduces the new generic instructions and new variation on
G_LOAD and adds lowering for them to convert back to the existing
representations.
Depends on D45466
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, aemerson, javed.absar
Reviewed By: aemerson
Subscribers: aemerson, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45540
llvm-svn: 331115
Summary:
* rL328953 does not include bindings for LLVMDIBuilderCreateClassType and LLVMDIBuilderCreateBitFieldMemberType despite declaring their prototypes. Provide these bindings now.
* Switch to more precise types with specific numeric limits matching the DIBuilder's C++ API.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46168
llvm-svn: 331114
Summary:
Masked merge has a pattern of: `((x ^ y) & M) ^ y`.
But, there is no difference between `((x ^ y) & M) ^ y` and `((x ^ y) & ~M) ^ x`,
We should canonicalize the pattern to non-inverted mask.
https://rise4fun.com/Alive/Yol
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45664
llvm-svn: 331112
Summary:
Masked merge has a pattern of: `((x ^ y) & M) ^ y`.
But, there is no difference between `((x ^ y) & M) ^ y` and `((x ^ y) & ~M) ^ x`,
We should canonicalize the pattern to non-inverted mask.
Differential Revision: https://reviews.llvm.org/D45663
llvm-svn: 331111
I intend to add further instruction tests to the resources-x86_64.s test file as required, but this initial commit is to help remove a load of unnecessary InstRW overrides in a future patch
llvm-svn: 331108
These instruction don't use their memory operands as normal memory operands. They're just used as addresses. They don't have a size because they aren't directly representing a load or store.
llvm-svn: 331104
Favor the 0x1a encoding for register/register move to match gas.
The instructions used RM and MR in their name along with rr/rm/mr at the end. To make more consistent with other instructions remove the RM/MR and use rr/rm/mr/rr_REV.
Hide the _REV encoding from the assembler but leave it for the disassembler.
llvm-svn: 331101
The invocation of getExact in ScalarEvolution::getBackedgeTakenInfo is used
only for getting statistic and for assert.
Even if statistics is disabled, the code related to it will be eliminated
the invocation to getExact itself will not be eliminated
because it may have side-effects like creation of new SCEVs.
So do invocation only when we collect statistics or executes asserts.
Reviewers: mkazantsev, sanjoy, javed.absar
Reviewed By: javed.absar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46178
llvm-svn: 331099
We still support the old mangling if we're trying to be ABI-compatible with
Clang 6.0, though.
Differential revision: https://reviews.llvm.org/D45451
llvm-svn: 331098
This commit makes it so that if you outline a def of some register, then the
call instruction created by the outliner actually reflects that the register
is defined by the call. It also makes it so that outlined functions don't
have the TracksLiveness property.
Outlined calls shouldn't break liveness assumptions that someone might make.
This also un-XFAILs the noredzone test, and updates the calls test.
llvm-svn: 331095
The effect of doing so is not disrupting the LoopPassManager when mixing this pass with other loop passes. This should help locality of access substaintially and avoids the cost of computing PostDom.
The assumption here is that the full GuardWidening (which does use PostDom) is run as a canonicalization before loop opts and that this version is just catching cases exposed by other loop passes. (i.e. LoopPredication, IndVarSimplify, LoopUnswitch, etc..)
llvm-svn: 331094
Summary:
D42479 (rL329525) enabled SDIV combine for pow2 non-splat vector
dividers. But when there is a 1 in a vector, the instruction sequence to
be generated involves shifting a value by the number of its bit widths,
which is undefined
(c64f4dbfe3/lib/CodeGen/SelectionDAG/DAGCombiner.cpp (L6000-L6006)).
Especially, in architectures that do not support vector instructions,
each of element in a vector will be computed separately using scalar
operations, and then the resulting value will be undef for '1' values
in a vector.
(All 1's vector is fine; only vectors mixed with 1 and others will be
affected.)
Reviewers: RKSimon, jgravelle-google
Subscribers: jfb, dschuff, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D46161
llvm-svn: 331092
Summary:
Previously the flag intrinsics always used the index instructions even if a mask instruction also exists.
To fix fix this I've created a single ISD node type that returns index, mask, and flags. The SelectionDAG CSE process will merge all flavors of intrinsics with the same inputs to a s ingle node. Then during isel we just have to look at which results are used to know what instruction to generate. If both mask and index are used we'll need to emit two instructions. But for all other cases we can emit a single instruction.
Since I had to do manual isel anyway, I've removed the pseudo instructions and custom inserter code that was working around tablegen limitations with multiple implicit defs.
I've also renamed the recently added sse42.ll test case to sttni.ll since it focuses on that subset of the sse4.2 instructions.
Reviewers: chandlerc, RKSimon, spatel
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46202
llvm-svn: 331091
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
This reapplies r330970 after fixing an uncovered bug in r331086 and
working around the situation caused by it.
llvm-svn: 331090
Now local value sinking only scans and numbers instructions added
between the current flush point and the last flush point. This ensures
that ISel is overall linear in the size of the BB.
Fixes PR37010 and re-enables local value sinking by default.
llvm-svn: 331087
This patch adds support for fragment expressions
TryToShrinkGlobalToBoolean() which were previously just dropped.
Thanks to Reid Kleckner for providing me a reproducer!
llvm-svn: 331086
Summary:
Currently, we
1. match `LHS` matcher to the `first` operand of binary operator,
2. and then match `RHS` matcher to the `second` operand of binary operator.
If that does not match, we swap the `LHS` and `RHS` matchers:
1. match `RHS` matcher to the `first` operand of binary operator,
2. and then match `LHS` matcher to the `second` operand of binary operator.
This works ok.
But it complicates writing of commutative matchers, where one would like to match
(`m_Value()`) the value on one side, and use (`m_Specific()`) it on the other side.
This is additionally complicated by the fact that `m_Specific()` stores the `Value *`,
not `Value **`, so it won't work at all out of the box.
The last problem is trivially solved by adding a new `m_c_Specific()` that stores the
`Value **`, not `Value *`. I'm choosing to add a new matcher, not change the existing
one because i guess all the current users are ok with existing behavior,
and this additional pointer indirection may have performance drawbacks.
Also, i'm storing pointer, not reference, because for some mysterious-to-me reason
it did not work with the reference.
The first one appears trivial, too.
Currently, we
1. match `LHS` matcher to the `first` operand of binary operator,
2. and then match `RHS` matcher to the `second` operand of binary operator.
If that does not match, we swap the ~~`LHS` and `RHS` matchers~~ **operands**:
1. match ~~`RHS`~~ **`LHS`** matcher to the ~~`first`~~ **`second`** operand of binary operator,
2. and then match ~~`LHS`~~ **`RHS`** matcher to the ~~`second`~ **`first`** operand of binary operator.
Surprisingly, `$ ninja check-llvm` still passes with this.
But i expect the bots will disagree..
The motivational unittest is included.
I'd like to use this in D45664.
Reviewers: spatel, craig.topper, arsenm, RKSimon
Reviewed By: craig.topper
Subscribers: xbolva00, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D45828
llvm-svn: 331085
Craig Topper