ThreadIDFunc => ThreadIDFunction
LogFunc => LogIDFunction
We try to avoid abbreviations/shortened names. Adjusted function parameter names
as well to replace _func with _function.
llvm-svn: 218773
r218568 added an explicit #include of the Linux ProcessMonitor.h to
POSIXThread.cpp, rather than including just "ProcessMonitor.h" and
relying on the build infrastructure for the appropriate paths.
For now add #ifdefs in the source to use the FreeBSD or Linux header
as appropriate; a cleaner fix (and perhaps some refactoring of the
POSIX classes) should still be done later.
llvm-svn: 218762
There is a state transition that seems potentially buggy that I am capturing and
logging here, and including an explicit test to demonstrate expected behavior. See new test
for detailed description. Added logging around this area since, if we hit it, we
may have a usage bug, or a new state transition we really need to investigate.
This is around this scenario:
Thread C deferred stop notification awaiting thread A and thread B to stop.
Thread A stops.
Thread A requests resume.
Thread B stops.
Here we will explicitly signal the deferred stop notification after thread B
stops even though thread A is now resumed. Copious logging happens here.
llvm-svn: 218683
the user level. It adds the ability to invent new stepping modes implemented by python classes,
and to view the current thread plan stack and to some extent alter it.
I haven't gotten to documentation or tests yet. But this should not cause any behavior changes
if you don't use it, so its safe to check it in now and work on it incrementally.
llvm-svn: 218642
The thread resume block is executed in the normal flow of thread
state queued event processing. The tests verify that it is executed
when we track the thread to be stopped and skipped when we track
it to already be running.
llvm-svn: 218638
Also added a test for the reset handling. The reset/state clearing happens
as a processed queue event. The only diff vs. standard processing is that
the exec clears the queue before queueing the activity to clear internal state.
i.e. once we get an exec, we really stop doing any other queue-based activity.
llvm-svn: 218629
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
A new thread arriving while a pending signal notification
is outstanding will (1) add the new thread to the list of
stops expected before the deferred signal notification is
fired, (2) send a stop request for the new thread, and
(3) track the new thread as currently running.
llvm-svn: 218578
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Tested two pending stops before notification, where one of the pending stop
requirements was already known to be stopped.
Tested pending thread stop before notification, then reporting thread with
pending stop died and verifies pending notification is made.
llvm-svn: 218559
Glad I did - caught a bug where the auto variable was not a reference
to a set and instead was a copy. I need to review rules on that!
llvm-svn: 218558
This change does the following:
* Remove test/c++/...
* Add gtest.
* Add gtest/unittest directory for unittesting individual classes.
* Add an initial Plugins/Process?linux/ThreadStateCoordinatorTest.cpp.
- currently failing a test (intentional).
- added a bare-bones ThreadStateCoordinator.cpp to Plugins/Process/Linux,
more soon. Just enough to prove out running gtest on Ubuntu and MacOSX.
* Added recursive make machinery so that doing a 'make' in gtest/ is
sufficient to kick off the existing test several directories down.
- Caveat - I currently short circuit from gtest/unittest/Makefile directly to
the one and only gtest/unittest/Plugins/Process/Linux directory. We'll need
to add the intervening layers. I haven't done this yet since to fix the
Xcode test failure correspondence, I may need to add a python layer which
might just handle the directory crawling.
* Added an Xcode project to the lldb workspace for gtest.
- Runs the recursive make system in gtest/Makefile.
- Default target is 'test'. test and clean are supported.
- Currently does not support test failure file/line correspondence.
Requires a bit of text transformation to hook that up.
llvm-svn: 218460
See http://reviews.llvm.org/D5486 for more details.
I was tracking a problem where llgs on linux would not pick up any environment variables. On OSX there is a virtual function PlatformDarwin::GetEnvironment() which correctly sets up the list of environment variables. On linux llgs it defaults to a base class default implementation which clears the list.
I moved the OSX implementation down to PlatformPOSIX. This fixes my problem on linux still works properly on OSX.
Change by Shawn Best.
Slight tweak to convert 'virtual' to 'override' in PlatformDarwin.h virtual method override by Todd.
Tested:
Ubuntu 14.04 x86_64, cmake/ninja build + tests.
MacOSX 10.9.5 x86_64, Xcode 6.1 Beta build + tests.
llvm-svn: 218424
See thread started here for motivation:
http://lists.cs.uiuc.edu/pipermail/lldb-dev/2014-September/005225.html
This change enables the ability to set breakpoints in ccache-based and executables that
make use of preprocessed source files. This ability existed in lldb before, but was off
by default.
Change by Doug Snyder.
llvm-svn: 218405
was broken in r214984 by the addition of an unconditional error
return at the start of the code block handling this method. Remove
the errant lines.
<rdar://problem/18416691>
llvm-svn: 218291
requirement for a command instead of the smallest. e.g. if a command
requires a Target, Process, Thread, and Frame, and none of those
are available, report the largest -- Target -- as being missing
instead of the smallest -- Frame.
Patch by Paul Osmialowski.
llvm-svn: 218181
platform locations. We didn't always do an exhaustive search through all the
platform locations, so we would have to read some files out of memory even though
they existed in the exploded shared cache or SDK.
<rdar://problem/18385947>
llvm-svn: 218157
that would clear the module list, and then put it back by hand. But we forgot to
also put its sections back in the target SectionList, so we would jettison it as
unloaded when we finished handling the first real load event. Add its sections.
<rdar://problem/18385947>
llvm-svn: 218156
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
For the Objective-C case, we do not have a "function type" notion, so we actually end up wrapping the clang ObjCMethodDecl in the Impl object, and ask function-y questions of it
In general, you can always ask for return type, number of arguments, and type of each argument using the TypeMemberFunction layer - but in the C++ case, you can also acquire a Type object for the function itself, which instead you can't do in the Objective-C case
llvm-svn: 218132
The $A handler was unnecessarily waiting for the launched app to hit a stop
before returning. Removed this code.
Renamed the llgs inferior launching code to LaunchProcessForDebugging ()
to prevent it from possibly being mistaken as code that lldb-platform uses
to launch a debugserver process. We probably want to look at breaking out
llgs-specific and lldb-platform-specific code into separate derived classes,
with common code in a shared base class.
llvm-svn: 218075
The issue was GDBRemoteCommunication::CheckForPacket() already fixes up any prefixed bytes (0x7d followed by value that is XOR'ed with 0x20). If we do this again, we cause binary packets to lose bytes.
This allows lldb-platform to be able to upload binaries and debug them remotely.
llvm-svn: 218002
% lldb ios-executable
(lldb) platform connect connect://localhost:11111
Prior to this fix, the host platform would be selected even though the target was using the ios-remote platform.
llvm-svn: 217963
The problem was the read_func we were supplying to the interactive interpreter wasn't stripping the newline from the end of the string. Now it does and multi-line python scripts can be typed in Xcode.
<rdar://problem/17696438>
llvm-svn: 217843
This allows us to fixup the address of the symbol as soon as we parse it
so that lldb is not confused thinking there are two different symbols in
the binary (one with the thumb bit, one without). Also, differentiating
between THUMB and ARM symbols allows the debugger to place the right
type of breakpoint.
Change by Stephane Sezer.
llvm-svn: 217841
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
There are target pointer members in struct jit_code_entry and jit_descriptor.
Data layout of those structures should be decided by target, not host.
This fixes JITLoaderGDB for 64-bit host and 32-bit target.
See http://reviews.llvm.org/D5339 for more details.
Change by Tong Shen.
llvm-svn: 217816
Also, in case they don't define any, change the default from "Run Python function <blah>" into "For more information run help <blah>"
The core issue here is that Python only allows one docstring per function, so we can't really attach both a short and a long help to the same command easily
There are alternatives but this is not a pressing enough concern to go through the motions quite yet
Fixes rdar://18322737
llvm-svn: 217795
ELF objects contain marker symbols to differentiate between ARM and
THUMB functions. Instead of storing them internally and having garbage
show up when symbols are searched for by the user, we can just skip them
and not store them at all, as we never actually need them.
Change by Stephane Sezer.
Tested:
Ubuntu 14.04 x86_64
MacOSX 10.9.4 x86_64
llvm-svn: 217782
Instead of forcing the remote arch type to MachO all the time, we
inspect the OS/vendor that the remote debug server reports and use it to
set the arch type to MachO, ELF or COFF accordingly.
See thread here for more context:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140915/012968.html
Change by Stephane Sezer.
Tested:
MacOSX 10.9.4 x86_64
Ubuntu 14.04 x86_64
llvm-svn: 217779
This is useful for checking inconsistencies between what the remote debug server thinks we are debugging and we think we are debugging. This follows the check for pointer byte size done just above.
Change by Stephane Sezer.
Tested:
Ubuntu 14.04 x86_64, llvm-3.5-built lldb
MacOSX 10.9.4, Xcode-Beta(2014-09-09)-built lldb.
llvm-svn: 217773
anyway /Vol doesn't complete correctly either. Somehow we're chopping the names
up incorrectly before passing them into the completer.
llvm-svn: 217720
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
Apparently, PEEKUSER/POKEUSER is something x86 specific, so I had to rework it for AArch64. This fixes assertion that occurs whenever lldb started on AArch64 device tried to read PC register (or any other register)
See http://reviews.llvm.org/D5232 for more details.
Change by Paul Osmialowski.
llvm-svn: 217691
ProcessStructReader instead of reading the structure out of libdispatch
by hand. I will convert more of the struct readers in SystemRuntimeMacOSX
over to use this class eventually.
llvm-svn: 217649
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
1. DW_FORM_strp and DW_FORM_sec_offset are 64bits for DWARF64 / 32bits for DWARF32
They are different from DW_FORM_addr, whose size is specified in .debug_info
2. Bump DWARF version support form [2,3] to [2,4] in DWARFDebugLine.cpp
3. Fix DWARFDebugLine to support DWARF64
See http://reviews.llvm.org/D5307 for more details.
Reviewed by Greg Clayton and Jason Molenda.
Change by Tong Shen.
llvm-svn: 217607
This change implements this ticket:
http://llvm.org/bugs/show_bug.cgi?id=20899
Adds the qThreadStopInfo RSP command for llgs and includes a test that
verifies both debugserver and llgs respond with something reasonable
on a multithreaded app.
llvm-svn: 217549
SetName is only used in LLDB to set a thead's own name. Move it there
to match OS X and Windows and slightly reduce the effort in any future
HostThread/ThisThread name refactoring.
llvm-svn: 217521
More work on the GetName/SetName arguments (thread_t vs tid_t) is needed
but this change should restore the build and basic operation.
llvm-svn: 217502
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This makes sure that nothing that requires Python is being built
when the LLDB_DISABLE_PYTHON flag is being passed in.
It also changes a use of CPPFLAGS to CPP.Flags since the former is overridden
when external flags are passed in while the later is not. I'm not sure exactly
why LLDB_DISABLE_PYTHON is in CXXFLAGS rather than CPPFLAGS,
but cleaning that up is for another commit.
Differential Revision: http://reviews.llvm.org/D4918
llvm-svn: 217414
This cleans up a couple of warnings [-Wcovered-switch-default] from the build by
removing the default case from a couple of switches which are fully covered.
This is generally better as it will help identify when a new item is added to
the enumeration but the use sites are not updated.
llvm-svn: 217376
This adds a definition for the TypeValidatorImpl_CXX destructor. Because the
destructor is first virtual method, and declared out-of-line, it also serves as
the key function. Since no definition was present, no virtual table for
TypeValidatorImpl_CXX was emitted, which results in link failures due to
references to undefined symbols.
Also add a definition for a TypeValidatorImpl contructor which was declared
out-of-line and referenced in a constructor for TypeValidatorImpl_CXX.
llvm-svn: 217375
Covers more of the behavior of rendezvous breakpoint handling and other
dynamic loader aspects, all on the 'enable log lldb dyld' log channel.
llvm-svn: 217283
Type Validators have the purpose of looking at a ValueObject, and making sure that there is nothing semantically wrong about the object's contents
For instance, if you have a class that represents a speed, the validator might trigger if the speed value is greater than the speed of light
This first patch hooks up the moving parts in the formatters subsystem, but does not link ValueObjects to TypeValidators, nor lets the SB API be exposed to validators
It also lacks the notion of Python validators
llvm-svn: 217277
lldb's internal memory cache chunks that are read from the remote
system. For a remote connection that is especially slow, a user may
need to reduce it; reading a 512 byte chunk of memory whenever a
4-byte region is requested may not be the right decision in these
kinds of environments.
<rdar://problem/18175117>
llvm-svn: 217083
detct unwind loops but there was a code path through there (using
architecture default unwind plans) that didn't do the check, and
could end up with an infinite loop unwind. Move that code into a
separate method and call it from both places where it is needed.
Also remove the use of ABI::FunctionCallsChangeCFA in that check.
I thought about it a lot and none of the architecutres that we're
supporting today can have a looping CFA.
Since the unwinder isn't using ABI::FunctionCallsChangeCFA() and
ABI::StackUsesFrames(), and the unwinder was the only reason
those methods exists, I removed them from the ABI and all its
plugins.
<rdar://problem/17364005>
llvm-svn: 216992
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
This patch accepts environment variables of the form:
LLDB_DEBUGSERVER_EXTRA_ARG_n
where n starts with 1, and may continue nearly indefinitely (up through std::numeric_limits<uint32_t>::max()).
The code loops around, starting with 1, until it doesn't find one of the environment variables. For each one it does find defined, it appends the environment variable's contents to the end of the debugserver/llgs startup command line issued when the stub is started for local debugging.
I am using this to add arbitrary startup commands to the llgs command line for turning on additional logging. For example:
export LLDB_DEBUGSERVER_EXTRA_ARG_1="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_2="log enable -f /tmp/llgs_packets.log gdb-remote packets"
export LLDB_DEBUGSERVER_EXTRA_ARG_3="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_4="log enable -f /tmp/llgs_process.log lldb process"
llvm-svn: 216745
Yet another step toward ARM64 support. With this commit, lldb-gdbserver started on ARM64 target can be accessed by lldb running on desktop PC and it can process simple commands (like 'continue'). Still ARM64 support lacks NativeRegisterContextLinux_arm64.* code which waits to be implemented.
Based on similar files for Linux x86_64 and Darwin ARM64. Due to common code extraction from Darwin related files, lldb should be tested for any unexpected regression on Darwin ARM64 machines too.
See the following for more details:
http://reviews.llvm.org/D4580http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012670.html
Change by Paul Osmialowski.
llvm-svn: 216737
For hosts that cannot support long thread names, shrink the host
wait4 thread name so that it does not truncate the PID in the thread name.
Change by Shawn Best.
llvm-svn: 216686
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
This is a lightweight wrapper around a pid. It is intended to be
lightweight enough to serve as a replacement anywhere we currently
store a pid. It provides convenience methods and common process
operations.
This patch does not yet make use of HostProcess anywhere.
llvm-svn: 216607
LLDB had implemented its own DynamicLibrary class for plugin
support. LLVM has an equivalent mechanism, so this patch deletes
the duplicated code in LLDB and updates LLDB to reference the
mechanism provided by LLVM.
llvm-svn: 216606
I copied this originally based on what debugserver was doing. This appears to
be incorrect and unncessary for Linux. The LinuxSignals on the lldb side
don't look for these and therefore they get handled incorrectly.
Leaving the hook in place since I think darwin will continue to need to
translate those signal numbers.
llvm-svn: 216564
Add entries to core_definitions and elf_arch_entries for
those variants. Select the subtype for the variant by parsing
the e_flags field of the elf header.
llvm-svn: 216541
creating the ModuleSpec to load the core file - we won't have a fat
core file and we can end up with cpu subtype mismatches if the core
file header isn't written out completely accurately. We need to
be a little loose in this particular case.
<rdar://problem/17843388>
llvm-svn: 216498
This change addresses this bug:
http://llvm.org/bugs/show_bug.cgi?id=20755
This change:
* Modifies llgs to send triple instead of cputype and cpusubtype when not on Apple platforms in qProcessInfo.
* Modifies lldb's GDBRemoteCommunicationClient to handle the triple returned from qProcessInfo if given.
When given, it will prefer to use triple over cputype and cpusubtype.
* Adds gdb-remote protocol tests to verify that cputype and cpusubtype are specified on darwin, and that triple is specified on Linux.
llvm-svn: 216470
I wrote this originally as a part of an unwind library that was using
a different coding convention and some of that old style remained after
its integration into lldb.
llvm-svn: 216419
In practice, 64bit eh_frame is not used even for x86_64 binaries. The main reason is in eh_frame we almost always use pc-relative addressing, so addresses are within 32bits and gcc just sticks to 32bit eh_frame.
I generated 64bit eh_frame for Android Java runtime and unwind successfully in gdb, and in lldb with this patch.
Patch by Tong Shen.
llvm-svn: 216409
We decided to use assmbly profiler instead of eh_frame for frame 0 because for compiler generated code, eh_frame is usually synchronous(a.k.a. only valid at call site); and we have no way to tell if it's asynchronous or not.
But for x86 & x86_64 compiler generated code:
1. clang & GCC describes all prologue instructions in eh_frame;
2. mid-function stack pointer altering instructions can be easily detected.
So we can grab eh_frame, and use assembly profiler to augment it into asynchronous unwind table.
This change also benefits hand-written assembly; eh_frame for hand-written assembly is often asynchronous,so we have a much better chance to successfully unwind through them.
Change by Tong Shen.
llvm-svn: 216406
When building without XCode on sytems where these constants are
not in the system header (or I presume with older versions of XCode),
these are needed to make this file compile, since unlike most other
uses of MachO specific constants, these use the system headers
rather than the LLVM-defined ones.
llvm-svn: 216332
with binaries in the dyld shared cache (esp on iOS) where the file
address for the executable binary (maybe from memory, maybe from
an expanded copy of the dyld shared cache) is different from the
file address in the dSYM. In that case, ObjectFileMachO replaces
the file addresses from the original binary with the dSYM file
addresses (usually 0-based) -- lldb doesn't have a notion of two
file addresses for a given module so they need to agree.
There was a cache of file addresses over in the Symtab so I added
a method to the Module and the objects within to clear any file address
caches if they exist, and added an implementation in the Symtab
module to do that.
<rdar://problem/16929569>
llvm-svn: 216258
This should bring HostInfo up to 99% completion. The remainder
of code in Host will be split into instantiatable classes
representing host processes, threads, dynamic libraries, and
process launching strategies.
llvm-svn: 216230
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
See this email thread:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140818/012487.html
This patch handles the case where the inferior process exits but leaves the ReadThread in a continuous loop reading from the communication pipe. On MacOSX, the ReadThread exits when it receives a 0 return value from the read due to EOF. On Linux the read returns -1 and sets errno to EIO error, this does not currently cause the thread to shutdown so it continues to read from the comm. In Communication::ReadThread I added a handler for eConnectionStatusError to disconnect and shutdown the thread.
Change by Alex Pepper.
llvm-svn: 216194
inside classes as static local variables and remove the static
ivars. Subclasses should use the accessor functions."
This change moved global statics to function local statics, but
forgot to make the locals static in the function, breaking all
platforms. Furthermore, MSVC doesn't support thread-safe function
local statics, so any use of a function local static on non
primitive types is undefined behavior on MSVC.
Reverting due to the fact that it's broken on all platforms, but
would like to have a discussion about the thread-safety issue
before it goes back in.
llvm-svn: 216123
What it does:
- it introduces a concept of EncodingToType to the ObjCLanguageRuntime
The ObjC runtime has a "type encoding" feature that describes types as strings
The EncodingToType is a decoder for that format, making types out of type encoding strings
This feature already existed in some shape as we were using it to create method signatures out of the runtime, but this checkin extends the parser to support the full syntax, and moves things so that more parts of LLDB have access to this decoder
- it splits the ClassDescriptorV2 object to its own file, it was starting to grow too large
- it adds to the ClassDescriptor mechanism a notion of ivar storage; the ObjC runtime vends ivar information as well as method information
While ivar information is not ready for prime type (i.e. we don't want to add it to the runtime generated types for expression evaluator usage), there are potentially useful scenarios in which realizing ivar types could be useful. For now, the ClassDescriptor is going to hold ivar information directly. Existing code already allows describing ivars, this patch hooks those moving parts up so that one can actually ask a ClassDescriptor about ivars for the class it represents
and as a couple minor niceties:
- it makes it possible to retrieve the LLDB ClangASTContext that is associated to a clang::ASTContext
- it extends the ValueObject-to-ClassDescriptor API in the language runtime to deal correctly with base-class hierarchies
llvm-svn: 216026
This change modifies the 'process launch' --disable-aslr option to take a boolean argument. If the user directly specifies --disable-aslr {true,false}, that setting will control whether the process is launched with ASLR disabled accordingly. In the event that the setting is not explicitly made on the process launch command line, then the value is retrieved from the target.disable-aslr setting (i.e. settings show target.disable-aslr).
llvm-svn: 215996
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
Previously lldbHost was built as multiple static libraries such as
lldbHostCommon, lldbHostLinux, etc. With this patch, the CMake
build produces only a single static library, lldbHost, whose file
set is dynamically created based on the platform.
llvm-svn: 215792
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
Fixes include:
1 - added new FileSpec method: bool FileSpec::Readable()
2 - detect when an executable is not readable and give an appropriate error for:
(lldb) file /tmp/unreadablefile
3 - detect when a core file is not readable and give an appropriate error
4 - detect when a specified core file doesn't exist and give an appropriate error
<rdar://problem/17727734>
llvm-svn: 215741
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
i386 eh_frame register numbering, encoding a darwin-specific
bug in the register numbering. Update the definitions to be
the correct values, Darwin can use the register numbers from
debugserver. Patch from Tong Shen.
llvm-svn: 215488
% lldb -x /bin/ls
(lldb) r
(lldb) r
Prior to this fix the first time it would run /usr/bin/arch with "-arch x86_64" the first time and succeed, and fail the second when the target had updated its architecture to x86_64h. We can't specify x86_64h to /usr/bin/arch, it doesn't handle it.
Also fixed it so /usr/bin/arch is only used for Apple triples.
<rdar://problem/17951312>
llvm-svn: 215475
Added llgs/debugserver gdb-remote tests around SIGABRT and SIGSEGV signal reception
notification. Found a few bugs in exception signal handling in Linux llgs. Fixed those.
llvm-svn: 215458
MinGW32 and Cygwin have been removed from the OSType enumeration. They are
represented as environments, and the OS is Windows in both of those cases.
Simply remove the value from the switch.
llvm-svn: 215304
from Python. If you don't need to refer to the result in another expression, there's no
need to bloat the persistent variable table with them since you already have the result
SBValue to work with.
<rdar://problem/17963645>
llvm-svn: 215244
in all but one of the AllocatedBlocks that matched the requested permissions.
Over time this would make the performance of expressions slow down considerably.
Also added a little bit of logging that was helpful in resolving the issue.
<rdar://problem/17954438>
llvm-svn: 215239
The select() API on Windows is not compatible with objects other
than sockets, so passing a descriptor for the command pipe to this
function is guaranteed to fail. ConnectionFileDescriptor is still
broken on Windows after this patch, but slightly less broken than
before.
llvm-svn: 215172
This patch adds the notion of a "path syntax" to FileSpec. There
are two syntaxes (Posix and Windows) and one "meta syntax",
Host Native, which uses the current platform to figure out the
appropriate syntax for host paths.
This allows paths from one platform to be represented and
manipulated on another platform even if they have different path
syntaxes.
llvm-svn: 215123
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
the same parent frame, but different current frame - e.g. when
you step past a tail call exit from a function. Apply the same
"avoid-no-debug" rules to this case as for a "step-in".
<rdar://problem/16189225>
llvm-svn: 214946
CommandReturnObject. Otherwise, all the overridden command
can do is say it overrode the command, not say what it did...
Also removed the duplicate definition of CommandOverrideCallback
from the private interfaces.
Now to figure out how to get this through the SB API's...
<rdar://problem/17911629>
llvm-svn: 214938
Todd Fiala