Add support for modulo for targets that have hardware division and for
those that don't. When hardware division is not available, we have to
choose the correct libcall to use. This is generally straightforward,
except for AEABI.
The AEABI variant is trickier than the other libcalls because it
returns { quotient, remainder }, instead of just one value like the
other libcalls that we've seen so far. Therefore, we need to use custom
lowering for it. However, we don't want to have too much special code,
so we refactor the target-independent code in the legalizer by adding a
helper for replacing an instruction with a libcall. This helper is used
by the legalizer itself when dealing with simple calls, and also by the
custom ARM legalization for the more complicated AEABI divmod calls.
llvm-svn: 305459
Lowering mixed struct args, params and returns used G_INSERT, which is a
bit more convoluted to support through the entire pipeline. Since they
don't occur that often in practice, it's probably wiser to leave them
out until later.
Meanwhile, we can lower homogeneous structs using G_MERGE_VALUES, which
has good support in the legalizer. These occur e.g. as the return of
__aeabi_idivmod, so it's nice to be able to support them.
llvm-svn: 305458
Summary:
Scheduling AESE/AESMC and AESD/AESIMC instruction pairs back-to-back
gives a double digit speedup on benchmarks using those instructions on
Cortex-A processors. In GCC, this optimization is part of the generic
processor model as well.
This change should not have a major performance impact on processors
that do not optimize AES instruction pairs, although I only had access
to Cortex-A processors for benchmarking.
Reviewers: rengolin, kristof.beyls, javed.absar, evandro, silviu.baranga, MatzeB, mcrosier, joelkevinjones, joel_k_jones, bmakam, t.p.northover
Reviewed By: evandro
Subscribers: sbaranga, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D33836
llvm-svn: 305457
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Differential Revision: https://reviews.llvm.org/D33887
llvm-svn: 305455
Previously if you used fmt_align(7, Center) you would get the
output ' 7 '. It may be desirable for the user to specify
the fill character though, for example producing '---7---'. This
patch adds that.
llvm-svn: 305449
The current name (addModulePath) and return value
(ModulePathStringTableTy::iterator) is a little confusing. This
API adds a module, not just a path. And the iterator is basically
just an implementation detail of the summary index. Address
both of those issues by renaming to addModule and introducing a
ModuleSummaryIndex::ModuleInfo type that the function returns.
Differential Revision: https://reviews.llvm.org/D34124
llvm-svn: 305422
Instead use target_link_libraries directly. Thanks to
Juergen Ributzka for the suggestion, which fixes an issue
when llvm is configured with no targets.
llvm-svn: 305421
Summary:
At present, `-profile-guided-section-prefix` is a `cl::Optional` option, which means it demands to be passed exactly zero or one times. Our build system makes it pretty tricky to guarantee this. We often accidentally pass the flag more than once (but always with the same "false" value) which results in an error, after which compilation fails:
```
clang (LLVM option parsing): for the -profile-guided-section-prefix option: may only occur zero or one times!
```
While we work on improving our build system, it also seems reasonable just to allow `-profile-guided-section-prefix` to be passed more than once, by to `cl::ZeroOrMore`. Quoting [[ http://llvm.org/docs/CommandLine.html#controlling-the-number-of-occurrences-required-and-allowed | the documentation ]]:
> The cl::ZeroOrMore modifier ... indicates that your program will allow the option to be specified zero or more times.
> ...
> If an option is specified multiple times for an option of the cl::opt class, only the last value will be retained.
Reviewers: danielcdh
Reviewed By: danielcdh
Subscribers: twoh, david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D34219
llvm-svn: 305413
This way we end up not looking at PHI args already removed.
MemSSA now goes through the updater so we can prune
it to avoid having redundant MemoryPHI arguments, but that
doesn't quite work for the general case.
Discussed with Daniel Berlin, fixes PR33406.
llvm-svn: 305409
There's an early out that's trying to detect when we don't know any bits that make up the legal range of a shift. The code subtracts one from BitWidth which creates a mask in the lower bits for power of 2 bit widths. This is then ANDed with the known bits to see if any of those bits are known. If the bit width isn't a power of 2 this creates a non-sensical mask.
This patch corrects this by rounding up to a power of 2 before doing the subtract and mask.
Differential Revision: https://reviews.llvm.org/D34165
llvm-svn: 305400
We know that shuffle masks are power-of-2 sizes, but there's no way (?) for LLVM to know that,
so hack combineX86ShufflesRecursively() to be much faster by replacing div/rem with shift/mask.
This makes the motivating compile-time bug in PR32037 ( https://bugs.llvm.org/show_bug.cgi?id=32037 )
about 9% faster overall.
Differential Revision: https://reviews.llvm.org/D34174
llvm-svn: 305398
Many times unit tests for different libraries would like to use
the same helper functions for checking common types of errors.
This patch adds a common library with helpers for testing things
in Support, and introduces helpers in here for integrating the
llvm::Error and llvm::Expected<T> classes with gtest and gmock.
Normally, we would just be able to write:
EXPECT_THAT(someFunction(), succeeded());
but due to some quirks in llvm::Error's move semantics, gmock
doesn't make this easy, so two macros EXPECT_THAT_ERROR() and
EXPECT_THAT_EXPECTED() are introduced to gloss over the difficulties.
Consider this an exception, and possibly only temporary as we
look for ways to improve this.
Differential Revision: https://reviews.llvm.org/D33059
llvm-svn: 305395
This was originally reverted because of some non-deterministic
failures on certain buildbots. Luckily ASAN eventually caught
this as a stack-use-after-scope, so the fix is included in
this patch.
llvm-svn: 305393
This reverts commit 3a204faa093c681a1e96c5e0622f50649b761ee0.
I've upset a buildbot which runs the address sanitizer:
ERROR: AddressSanitizer: stack-use-after-scope
lib/Target/ARM/ARMISelLowering.cpp:2690
That Twine variable is used illegally.
llvm-svn: 305390
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
llvm-svn: 305389
The ARM backend asserts against constant pool lowering when it generates
execute-only code in order to prevent the generation of constant pools in
the text section. It appears that target independent optimizations might
generate DAG nodes that represent constant pools. By lowering such nodes
as global addresses we don't violate the semantics of execute-only code
and also it is guaranteed that execute-only behaves correct with the
position-independent addressing modes that support execute-only code.
Differential Revision: https://reviews.llvm.org/D33773
llvm-svn: 305387
Summary:
This patch is part of 3 patches that together form a single patch, but must be introduced in stages in order not to break things.
The way that LLVM interprets DW_OP_plus in DIExpression nodes is basically that of the DW_OP_plus_uconst operator since LLVM expects an unsigned constant operand. This unnecessarily restricts the DW_OP_plus operator, preventing it from being used to describe the evaluation of runtime values on the expression stack. These patches try to align the semantics of DW_OP_plus and DW_OP_minus with that of the DWARF definition, which pops two elements off the expression stack, performs the operation and pushes the result back on the stack.
This is done in three stages:
• The first patch (LLVM) adds support for DW_OP_plus_uconst.
• The second patch (Clang) contains changes all its uses from DW_OP_plus to DW_OP_plus_uconst.
• The third patch (LLVM) changes the semantics of DW_OP_plus and DW_OP_minus to be in line with its DWARF meaning. This patch includes the bitcode upgrade from legacy DIExpressions.
Patch by Sander de Smalen.
Reviewers: echristo, pcc, aprantl
Reviewed By: aprantl
Subscribers: fhahn, javed.absar, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D33894
llvm-svn: 305386
This patch fixes two systemic machine verifier errors in the long
branch pass. The first is the incorrect basic block successors
and the second was the incorrect construction of several jump
instructions.
This partially resolves PR27458 and the associated PR32146.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33378
llvm-svn: 305382
This is causing failures on linux bots with an invalid stream
read. It doesn't repro in any configuration on Windows, so
reverting until I have a chance to investigate on Linux.
llvm-svn: 305371
This allows us to use yaml2obj and obj2yaml to round-trip CodeView
symbol and type information without having to manually specify the bytes
of the section. This makes for much easier to maintain tests. See the
tests under lld/COFF in this patch for example. Before they just said
SectionData: <blob> whereas now we can use meaningful record
descriptions. Note that it still supports the SectionData yaml field,
which could be useful for initializing a section to invalid bytes for
testing, for example.
Differential Revision: https://reviews.llvm.org/D34127
llvm-svn: 305366
This patch adds code which verifies that each bucket in the .apple_names
accelerator table is either empty or has a valid hash index.
Differential Revision: https://reviews.llvm.org/D34177
llvm-svn: 305344
Summary:
When legalizing G_LOAD/G_STORE using NarrowScalar, we should avoid emitting
%0 = G_CONSTANT ty 0
%1 = G_GEP %x, %0
since it's cheaper to not emit the redundant instructions than it is to fold them
away later.
Reviewers: qcolombet, t.p.northover, ab, rovka, aditya_nandakumar, kristof.beyls
Reviewed By: qcolombet
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32746
llvm-svn: 305340
InstCombine has an optimization that recognizes an and with the sign bit of legal type size and turns it into a truncate and compare that checks the sign bit. But the select handling code doesn't recognize this idiom.
llvm-svn: 305338