Summary:
Along with this, support for an optional argument to the "num_children"
method of a Python synthetic child provider has also been added. These have
been added with the following use case in mind:
Synthetic child providers currently have a method "has_children" and
"num_children". While the former is good enough to know if there are
children, it does not give any insight into how many children there are.
Though the latter serves this purpose, calculating the number for children
of a data structure could be an O(N) operation if the data structure has N
children. The new method added in this change provide a middle ground.
One can call GetNumChildren(K) to know if a child exists at an index K
which can be as large as the callers tolerance can be. If the caller wants
to know about children beyond K, it can make an other call with 2K. If the
synthetic child provider maintains state about it counting till K
previosly, then the next call is only an O(K) operation. Infact, all
calls made progressively with steps of K will be O(K) operations.
Reviewers: vharron, clayborg, granata.enrico
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D13778
llvm-svn: 250930
Summary:
Loop detection code is being called before every element access. Although it tries to cache some
of the data by remembering the loop-free initial segment, every time it needs to increase this
segment, it will start from scratch. For the typical usage pattern, where one accesses the
elements in order, the loop detection will need to be run after every access, resulting in
quadratic behavior. This behavior is noticable even for the default 255 element limit.
In this commit, I rewrite the algorithm to be truly incremental -- it maintains the state of its
loop-detection runners between calls, and reuses them when it needs to check another segment.
This way, each part of the list is scanned only once, resulting in linear behavior.
Also note that I have changed the operator== of ListEntry to do the comparison based on the
value() function (instead of relying on ValueObjectSP equality). In my experiments, I kept
getting different ValueObjectSPs when going through the same element twice.
Reviewers: granata.enrico
Subscribers: lldb-commits, sivachandra
Differential Revision: http://reviews.llvm.org/D13902
llvm-svn: 250890
Right now our Python code does not all share a common root. Tests and
scripts both contain python code that cannot take advantage of reusability
since they are unrelated siblings of each other.
In particular, this presents a problem for wanting to use third party
packages from both sides, since it does not make sense to copy the module
into both places.
This patch solves this by introducing a script lldb_shared.py which is a
very lightweight script that just searches up the tree until it finds a
root, and then imports a module from there. That module knows how to
find all of the shared code that LLDB uses, and adjusts sys.path
accordingly to make them all visible.
llvm-svn: 250858
Summary:
ADB packets have a maximum size of 4k. This means the size of memory reads does not affect speed
too much (as long as it fits in one packet). Therefore, I am increasing the default memory read
size for android to 2k. This value is used only if the user has not modified the default
memory-cache-line-size setting.
Reviewers: clayborg, tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D13812
llvm-svn: 250814
This patch was generating by running `2to3` on the files in the
lldb/test directory. This patch should be NFC, but it does
introduce the `from __future__ import print_function` line, which
will break future uses of the print statement.
llvm-svn: 250763
It was adding all the test infrastructure paths properly, but it
was not adding the lldb module. The current approach only adds the
lldb from the path. That can be improved (in the comments) to add
the one from the related build directory if it can be ascertained.
With this change, lldb tests can be run through pylint/flake8
and have the lldb module found and used as part of the checks.
llvm-svn: 250453
disabled the use of the jThreadGetExtendedInfo packet which is used
to retrieve additional information about a thread, such as the QoS
setting for that thread on darwin systems.
Re-enable the use of the jThreadGetExtendedInfo packet, and add
some quick tests to the TestQueues mac test case which will verify
that we can retrieve the QoS names for these test threads.
<rdar://problem/22925096>
llvm-svn: 250364
Summary:
This commit adds support for binary memory reads ($x) to lldb-server. It also removes the "0x"
prefix from the $x client packet, to make it more compatible with the old $m packet. This allows
us to use almost the same code for handling both packet types. I have verified that debugserver
correctly handles $x packets even without the leading "0x". I have added a test which verifies
that the stub returns the same memory contents for both kinds of memory reads ($x and $m).
Reviewers: tberghammer, jasonmolenda
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13695
llvm-svn: 250295
* ArchSpec::MergeFrom() would erroneously promote an unspecified
unknown to a specified unknown when both the ArchSpec and the merged
in ArchSpec were both unspecified unknowns. This no longer happens,
which fixes issues with global module cache lookup in some
situations.
* Added ArchSpec::DumpTriple(Stream&) that now properly prints
unspecified unknowns as '*' and specified unknows as 'unknown'.
This makes it trivial to tell the difference between the two.
Converted printing code over ot using DumpTriple() rather than
building from scratch.
* Fixed up a couple places that were not guaranteeing that an
unspecified unknown was recorded as such.
llvm-svn: 250253
Summary:
Test decorators were ignoring AttributeError exceptions. These were introduced three years ago,
and copied to all decorators. They seem to serve no purpose and removing them produces no errors.
Given that they have prevented us from noticing the problem in r249819, I am removing them.
Reviewers: zturner, tfiala
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13583
llvm-svn: 250038
* XFAIL it for android arm/aarch64 as watchpoints aren't supported there
* Remove the dwarf/dsym test separation as they will be generated automatically
llvm-svn: 250024
Summary:
- Changed from 16 bits to 8 bits for Intel Architecture
-- FXSAVE structure now conforms with the layout of FXSAVE
area specified by IA Architecture Software Developer Manual
- Modified Linux and FreeBSD specific files to support this change
-- MacOSX already uses 8 bits for ftag register
- Modified TestRegisters.py and a.cpp:
-- Change allows 8 bit comparison of ftag values
-- Change resolves Bug 24733:
Removed XFAIL for Clang as the test works and passes for
Clang compiler as well
-- Change provides a Generic/Better way of testing Bug 24457
and Bug 25050 by using 'int3' inline assembly in inferior
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, clayborg
Subscribers: tfiala, emaste
Differential Revision: http://reviews.llvm.org/D13587
llvm-svn: 250022
Summary: On x86, we only have 4 watchpoint registers.
Reviewers: mohit.bhakkad
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13608
llvm-svn: 249916
Summary:
Log files produced by dotest have names derived from the test name, and this produces errors in
case we have multiple tests with the same name. Additionally, it's good if the test name explains
what the test is testing (which it clearly doesn't do well if there are multiple tests with
identical names). This commit makes the presence of such tests a hard error.
Reviewers: tberghammer, zturner
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13588
llvm-svn: 249828
We want to skip these tests when the target platform is darwin, not
when the host because they have to be enabled in case of darwin ->
android
llvm-svn: 249825
Summary:
In bug 24074, the type information is not shown
correctly. This commit includes the following -
-> Changes for displaying correct type based on
current lexical scope for the command "image
lookup -t"
-> The corresponding testcase.
-> This patch was reverted due to segfaults in
FreeBSD and Mac, I fixed the problems for both now.
Reviewers: emaste, granata.enrico, jingham, clayborg
Differential Revision: http://reviews.llvm.org/D13290
llvm-svn: 249673
Summary: This change fixes pr24916. As associated test has been added.
Reviewers: clayborg
Subscribers: zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D13224
llvm-svn: 249629
Greg Clayton