This `R_WASM_MEMORY_ADDR_SELFREL_I32` relocation represents an offset
between its relocating address and the symbol address. It's very similar
to `R_X86_64_PC32` but restricted to be used for only data segments.
```
S + A - P
```
A: Represents the addend used to compute the value of the relocatable
field.
P: Represents the place of the storage unit being relocated.
S: Represents the value of the symbol whose index resides in the
relocation entry.
Proposal: https://github.com/WebAssembly/tool-conventions/issues/162
Differential Revision: https://reviews.llvm.org/D96659
Specifically:
- InputChunk::outputOffset -> outSecOffset
- Symbol::get/setVirtualAddress -> get/setVA
- add InputChunk::getOffset helper that takes an offset
These are mostly in preparation for adding support for
SHF_MERGE/SHF_STRINGS but its also good to align with ELF where
possible.
Differential Revision: https://reviews.llvm.org/D97595
With dynamic linking we have the current limitation that there can be
only a single active data segment (since we use __memory_base as the
load address and we can't do arithmetic in constant expresions).
This change delays the merging of active segments until a little later
in the linking process which means that the grouping of data by section,
and the magic __start/__end symbols work as expected under dynamic
linking.
Differential Revision: https://reviews.llvm.org/D96453
This commit adds table symbol support in a partial way, while still
including some special cases for the __indirect_function_table symbol.
No change in tests.
Differential Revision: https://reviews.llvm.org/D94075
Under existing behavior discarded functions are relocated to have the start pc
0. This causes problems when debugging as they typically overlap the first
function and lldb symbol resolution frequently chooses a discarded function
instead of the correct one. Using the value -1 or -2 (depending on which DWARF
section we are writing) is sufficient to prevent lldb from resolving to these
symbols.
Reviewed By: MaskRay, yurydelendik, sbc100
Differential Revision: https://reviews.llvm.org/D91803
These relocations represent offsets from the __tls_base symbol.
Previously we were just using normal MEMORY_ADDR relocations and relying
on the linker to select a segment-offset rather and absolute value in
Symbol::getVirtualAddress(). Using an explicit relocation type allows
allow us to clearly distinguish absolute from relative relocations based
on the relocation information alone.
One place this is useful is being able to reject absolute relocation in
the PIC case, but still accept TLS relocations.
Differential Revision: https://reviews.llvm.org/D91276
Accounting for the fact that Wasm function indices are 32-bit, but in wasm64 we want uniform 64-bit pointers.
Includes reloc types for 64-bit table indices.
Differential Revision: https://reviews.llvm.org/D83729
This adds 4 new reloc types.
A lot of code that previously assumed any memory or offset values could be contained in a uint32_t (and often truncated results from functions returning 64-bit values) have been upgraded to uint64_t. This is not comprehensive: it is only the values that come in contact with the new relocation values and their dependents.
A new tablegen mapping was added to automatically upgrade loads/stores in the assembler, which otherwise has no way to select for these instructions (since they are indentical other than for the offset immediate). It follows a similar technique to https://reviews.llvm.org/D53307
Differential Revision: https://reviews.llvm.org/D81704
Debug sections are special in that they can contain relocations against
symbols that are not present in the final output (i.e. not live).
However it is also possible to have R_WASM_TABLE_INDEX relocations
against symbols that don't have a table index assigned (since they are
not address taken by actual code.
Fixes: https://github.com/emscripten-core/emscripten/issues/9023
Differential Revision: https://reviews.llvm.org/D66435
llvm-svn: 369423
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
We should be generating one __start/__stop pair per output segment
not per input segment. The test wasn't catching this because it was
only linking a single object file.
Fixes PR41565
Differential Revision: https://reviews.llvm.org/D64148
llvm-svn: 365308
Summary:
The list of relocations with addend in lld was missing `R_WASM_MEMORY_ADDR_REL_SLEB`,
causing `wasm-ld` to generate corrupted output. This fixes that problem and while
we're at it pulls the list of such relocations into the Wasm.h header, to avoid
duplicating it in multiple places.
Reviewers: sbc100
Differential Revision: https://reviews.llvm.org/D63696
llvm-svn: 364367
The code we generate for applying data relocations at runtime omitted
the symbols with GOT entries.
Also refactor the code to reduce duplication.
Differential Revision: https://reviews.llvm.org/D61111
llvm-svn: 359207
See https://reviews.llvm.org/D59860
The initial version of this change effected more than just the
error message. This version is scoped down to only effect the error
itself.
llvm-svn: 357328
Also Revert "[WebAssembly] Fix typo from rL357143"
This reverts commit 0805ec5f7b and
a9958fc30d
(rL357143 and rL357144)
They cause failures with address-taken extern (JS) functions
in emscripten.
llvm-svn: 357224
This change implements lowering of references global symbols in PIC
mode.
This change implements lowering of global references in PIC mode using a
new @GOT reference type. @GOT references can be used with function or
data symbol names combined with the get_global instruction. In this case
the linker will insert the wasm global that stores the address of the
symbol (either in memory for data symbols or in the wasm table for
function symbols).
For now I'm continuing to use the R_WASM_GLOBAL_INDEX_LEB relocation
type for this type of reference which means that this relocation type
can refer to either a global or a function or data symbol. We could
choose to introduce specific relocation types for GOT entries in the
future. See the current dynamic linking proposal:
https://github.com/WebAssembly/tool-conventions/blob/master/DynamicLinking.md
Differential Revision: https://reviews.llvm.org/D54647
llvm-svn: 357022
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`.)
The list of fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57499
llvm-svn: 353076
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
There are only certain relocation types that can exist in the
wasm code section and they are all LEB types. Remove the dead
code for handling the other (I32) reloc types.
Differential Revision: https://reviews.llvm.org/D47226
llvm-svn: 333030
* Gets function size field from right location
* Writes I32 values during compression
Patch by Yury Delendik
Differential Revision: https://reviews.llvm.org/D47204
llvm-svn: 333002
This change adds the ability for lld to remove LEB padding from
code section. This effectively shrinks the size of the resulting
binary in proportion to the number of code relocations.
Since there will be a performance cost this is currently only active for
-O1 and above. Some toolchains may instead want to perform this
compression as a post linker step (for example running a binary through
binaryen will automatically compress these values).
I imagine we might want to make this the default in the future.
Differential Revision: https://reviews.llvm.org/D46416
llvm-svn: 332783
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
Differential Revision: https://reviews.llvm.org/D44977
llvm-svn: 332351
Also:
- Reduce the error to a warning so that debug and release
versions can still link the same inputs.
- Add another check to verify the input LEB is padded to 5 bytes
Differential Revision: https://reviews.llvm.org/D46479
llvm-svn: 331571
Specifically add support for custom sections that contain
relocations, and for the two new relocation types needed
by DWARF sections.
See: https://reviews.llvm.org/D44184
Patch by Yury Delendik!
Differential Revision: https://reviews.llvm.org/D44184
llvm-svn: 331566
Relocation addends can be negative so should be written as
signed LEBs. This bug meant that writing value between 64
and 128 would be incorrectly interpreted as negative by the
object file readers.
Differential Revision: https://reviews.llvm.org/D45825
llvm-svn: 330374
Summary:
The content of custome sections no longer includes the
name itself.
See: https://reviews.llvm.org/D45579
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45580
llvm-svn: 329948
Copy user-defined custom sections into the output, concatenating
sections with the same name.
Differential Revision: https://reviews.llvm.org/D45340
llvm-svn: 329717