Darwin uses two-level-namespace lookup for symbols which means the static
linker records where each symbol must be found at runtime. Thus defining a
symbol in a dylib loaded earlier will not effect where symbols needed by
later dylibs will be found. Instead overriding is done through a section
of type S_INTERPOSING which contains tuples of <interposer, interposee>.
llvm-svn: 221424
Darwin uses two-level-namespace lookup for symbols which means the static
linker records where each symbol must be found at runtime. Thus defining a
symbol in a dylib loaded earlier will not effect where symbols needed by
later dylibs will be found. Instead overriding is done through a section
of type S_INTERPOSING which contains tuples of <interposer, interposee>.
llvm-svn: 221421
SECREL relocation's value is the offset to the beginning of the section.
Because of the off-by-one error, if a SECREL relocation target is at the
beginning of a section, it got wrong value.
Added a test that would have caught this.
llvm-svn: 221420
The local variable `cfi` became dead in r220730 when it's use was
obviated; it was replaced with a call to read32.
No functionality change intended.
llvm-svn: 221412
Many programs, for reasons unknown, really like to look at the
AddressOfRelocationTable to determine whether or not they are looking at
a bona fide PE file. Without this, programs like the UNIX `file'
utility will insist that they are looking at a MS DOS executable.
llvm-svn: 221335
LLD skipped COMDAT section symbols when reading them because
I thought we don't want to have symbols with the same name.
But they are actually needed because relocations may refer to
the section symbols. So we shoulnd't skip them.
llvm-svn: 221329
The job of the CompactUnwind pass is to turn __compact_unwind data (and
__eh_frame) into the compressed final form in __unwind_info. After it's done,
the original atoms are no longer relevant and should be deleted (they cause
problems during actual execution, quite apart from the fact that they're not
needed).
llvm-svn: 221301
The ELF writer creates a invalid binary for few cases with large filesize and
memory size for segments. This patch addresses the functionality and updates the
test. This patch also cleans up parts of the ELF writer for future enhancements
to support Linker scripts.
llvm-svn: 221233
Normally, PE files have section names of eight characters or less.
However, this is problematic for DWARF because DWARF section names are
things like .debug_aranges.
Instead of truncating the section name, redirect the section name into
the string table.
Differential Revision: http://reviews.llvm.org/D6104
llvm-svn: 221212
This patch does *not* implement any semantic actions, but it is a first step to
teach LLD how to read complete linker scripts. The additional linker scripts
statements whose parsing is now supported are:
* SEARCH_DIR directive
* SECTIONS directive
* Symbol definitions inside SECTIONS including PROVIDE and PROVIDE_HIDDEN
* C-like expressions used in many places in linker scripts
* Input to output sections mapping
The goal of this commit was guided towards completely parsing a default GNU ld
linker script and the linker script used to link the FreeBSD kernel. Thus, it
also adds a test case based on the default linker script used in GNU ld for
x86_64 ELF targets. I tested SPEC userland programs linked by GNU ld, using the
linker script dump'ed by this parser, and everything went fine. I then tested
linking the FreeBSD kernel with a dump'ed linker script, installed the new
kernel and booted it, everything went fine.
Directives that still need to be implemented:
* MEMORY
* PHDRS
Reviewers: silvas, shankarke and ruiu
http://reviews.llvm.org/D5852
llvm-svn: 221126
lld was regenerating LC_DATA_IN_CODE in .o output files, but not into
final linked images.
Update test case to verify data-in-code info makes it into final linked images.
llvm-svn: 220827
Objective-C switched to a new ABI which uses a different mangling for class
names. But to keep projects building that use export lists that use the old
class name mangling, the linker recognizes the old names and transforms them
to the new mangling.
llvm-svn: 220598
In final linked shared images, the __TEXT segment contains both code and
the mach-o header/load-commands. In the case of a data-only dylib, there is
no code, so we need to force the addition of the __TEXT segment.
llvm-svn: 220597
/nodefaultlib argument is a path name, so that needs to be compared
case-insensitive way. Also the ".lib" extension should be ignored.
llvm-svn: 220508
This is a follow-up patch for r220333. r220333 renames exported symbols.
That raised another issue; if we have both decorated and undecorated names
for the same symbol, we'll end up have two duplicate exported symbol
entries.
This is a fix for that issue by removing duplciate entries.
llvm-svn: 220350
All compiler generated mach-o object files are marked with MH_SUBSECTIONS_VIA_SYMBOLS.
But hand written assembly files need to opt-in if they are written correctly.
The flag means the linker can break up a sections at symbol addresses and
dead strip or re-order functions.
This change recognizes object files without the flag and marks its atoms as
not dead strippable and adds a layout-after chain of references so that the
atoms cannot be re-ordered.
llvm-svn: 220348
There are two ways to specify a symbol to be exported in the module
definition file.
1) EXPORT <external name> = <symbol>
2) EXPORT <symbol>
In (1), you give both external name and internal name. In that case,
the linker tries to find a symbol using the internal name, and write
that address to the export table with the external name. Thus, from
the outer world, the symbol seems to be exported as the external name.
In (2), internal name is basically the same as the external name
with an exception: if you give an undecorated symbol to the EXPORT
directive, and if the linker finds a decorated symbol, the external
name for the symbol will become the decorated symbol.
LLD didn't implement that exception correctly. This patch fixes that.
llvm-svn: 220333
The darwin linker operates differently than the gnu linker with respect to
libraries. The darwin linker first links in all object files from the command
line, then to resolve any remaining undefines, it repeatedly iterates over
libraries on the command line until either all undefines are resolved or no
undefines were resolved in the last pass.
When Shankar made the InputGraph model, the plan for darwin was for the darwin
driver to place all libraries in a group at the end of the InputGraph. Thus
making the darwin model a subset of the gnu model. But it turns out that does
not work because the driver cannot tell if a file is an object or library until
it has been loaded, which happens later.
This solution is to subclass InputGraph for darwin and just iterate the graph
the way darwin linker needs.
llvm-svn: 220330
HAVE_CXXABI_H is not defined on FreeBSD but the system actually
has the header. CMake test fails because the header depends on size_t.
llvm-svn: 220315
The canParse function for all the ELF subtargets check if the input files match
the subtarget.
There were few mismatches in the input files that didnt match the subtarget for
which the link was being invoked, which also acts as a test for this change.
llvm-svn: 220182
For PC relative accesses, negative addends were to be ignored. The linker was
not ignoring it and would fail with an assert. This fixes the issue and is able
to get Helloworld working.
llvm-svn: 220179
The old code was used as a workaround to fix how relocations are calculated for
sections with SHF_MERGE|SHF_STRINGS attribute. This patch removes the erroneous
code.
llvm-svn: 220159
This fixes the way archive members are displayed when the linker is used with a
flag to show all the files that it processes.
When an archive file member is read, we need to show the archive filename and
the member.
llvm-svn: 220144
This would permit the ELF reader to check the architecture that is being
selected by the linking process.
This patch also sorts the include files according to LLVM conventions.
llvm-svn: 220129
The code was making non-portable assumptions about the exact string returned by
the glob (possibly by the shell?); this is more robust and matches what is done
everywhere else.
llvm-svn: 220117
Previously we supported x86 only. This patch is to support x64.
The array of pointers to delay-loaded functions points the
DLL delay loading function at start-up. When a function is called
for the first time, the delay loading function gets called and
then rewrite the function pointer array.
llvm-svn: 220096
-all_load tells the darwin linker to immediately load all members of all
archives. The code do that used reinterpret_cast<> instead of dyn_cast<>.
If the file was a dylib, the reinterpret_cast<> turned a pointer to a dylib
into a pointer to an archive...boom.
Added test case to reproduce the crash, simplified the code and used dyn_cast<>.
llvm-svn: 219990
First, add a comment to support more variation in FDE formats. Second, refactor
fde -> function handling into a separate function living in the ArchHandler.
llvm-svn: 219959
To deal with cycles in shared library dependencies, the darwin linker supports
marking specific link dependencies as "upward". An upward link is when a
lower level library links against a higher level library.
llvm-svn: 219949
This patch creates the import address table and sets its
address to the delay-load import table. This also creates
wrapper functions for __delayLoadHelper2.
x86 only for now.
llvm-svn: 219948
Not all situations are representable in the compressed __unwind_info format,
and when this happens the entry needs to point to the more general __eh_frame
description.
Just x86_64 implementation for now.
rdar://problem/18208653
llvm-svn: 219836
We'll also need references back to the CIE eventually, but for now making sure
we can work out what an FDE is referring to is enough.
The actual kind of reference needs to be different between architectures,
probably because of MachO's chronic shortage of relocation types but I don't
really want to know in case I find out something that distresses me even more.
rdar://problem/18208653
llvm-svn: 219824
Because we use cast<> at the beginning of this function, it will
abort there if a given atom is not a DefinedAtom.
In the switch statement, we checked if a given atom is a DefinedAtom
again by evaluating definition() == Atom::definitionRegular.
This was always true. So we can remove the outer switch statement.
llvm-svn: 219724
Arm code has two instruction encodings "thumb" and "arm". When branching from
one code encoding to another, you need to use an instruction that switches
the instruction mode. Usually the transition only happens at call sites, and
the linker can transform a BL instruction in BLX (or vice versa). But if the
compiler did a tail call optimization and a function ends with a branch (not
branch and link), there is no pc-rel BX instruction.
The ShimPass looks for pc-rel B instructions that will need to switch mode.
For those cases it synthesizes a shim which does the transition, then modifies
the original atom with the B instruction to target to the shim atom.
llvm-svn: 219655
When committed in r219353, this patch originally caused problems because it was
not tested in debug build. In such scenarios, Driver.cpp adds two additional
passes. These passes serialize all atoms via YAML and reads it back. Since the
patch changed ObjectAtom to hold a new reference, the serialization was removing
the extra data.
This commit implements r219853 in another way, similar to the original MIPS way,
by using a StringSet that holds the names of all copied atoms instead of
directly holding a reference to the copied atom. In this way, this commit is
simpler and eliminate the necessity of changing the DefinedAtom hierarchy to
hold a new data.
Reviewers: shankarke
http://reviews.llvm.org/D5713
llvm-svn: 219449
We are going to have another type of jump table for the delay-load
import table. In order to prepare for that, we want to factor out
the function handling the jump table. No functionality change.
llvm-svn: 219446
Previously the field was not set. The field should be pointing to
a placeholder where the DLL delay-loader writes the base address
of a DLL.
llvm-svn: 219415
Previously, LLVM object tools didn't know the true size of the sections.
This would result in tools thinking that a section with a VirtualSize
smaller than FileAlignment would end in zeros when actually those zeros
weren't really part of the section contents.
llvm-svn: 219394
This is a partial patch to emit the delay-import table. With this,
LLD is now able to emit the table that llvm-readobj can read and
dump.
The table lacks a few fields, such as the address of HMODULE, the
import address table, etc. They'll be added in subsequent patches.
llvm-svn: 219384
Enhances the creation of an ELF dynamic executable by avoiding recording
unnecessary shared libraries as NEEDED to load a program.
To do this, we must keep track of not only symbols that were referenced but
also of COPY relocations, which steal the symbol from a shared library but does
not store from which lib this symbol came from. To fix this, this commit changes
ObjectSymbol to store the original library from which this symbol came. With
this information, we are able to build a list of the exact shared libraries that
must be marked as DT_NEEDED, instead of blindly marking all shared libraries as
needed.
This logic originally came from the MIPS backend with some adaptation.
Reviewers: atanasyan, shankar.easwaran
http://reviews.llvm.org/D5574
llvm-svn: 219353
Updates the remaining tasks in the X86_64 ELF lld backend after the commit that
handles general dynamic TLS relocations.
Reviewer: shankarke
http://reviews.llvm.org/D5673
llvm-svn: 219350
This commit implements in the X86_64 ELF lld backend yet another feature that
was only available in the MIPS backend. However, this patch changes generic ELF
classes to make it trivial for other ELF backends to use this logic too. When
creating a dynamic executable that has dynamic relocations against weak
undefined symbols, these symbols must be exported to the dynamic symbol table
to seek a possible resolution at run time.
A common use case is the __gmon_start__ weak glibc undefined symbol.
Reviewer: shankarke
http://reviews.llvm.org/D5571
llvm-svn: 219349
When creating a dynamic executable and receiving the -E flag, the linker should
export all globally visible symbols in its dynamic symbol table.
This commit also moves the logic that exports symbols in the dynamic symbol
table from OutputELFWriter to the ExecutableWriter class. It is not correct to
leave this at OutputELFWriter because DynamicLibraryWriter, another subclass of
OutputELFWriter, already exports all symbols, meaning we can potentially end up
with duplicated symbols in the dynamic symbol table when creating shared libs.
Reviewers: shankarke
http://reviews.llvm.org/D5585
llvm-svn: 219334
Summary: Add support in the universal driver to print the lld version and the
repository version.
Test Plan: A driver test is added
Reviewers: kledzik, ruiu
Reviewed By: ruiu
Subscribers: llvm-commits
Projects: #lld
Differential Revision: http://reviews.llvm.org/D5641
llvm-svn: 219277
mach-o supports "fat" files which are a header/table-of-contents followed by a
concatenation of mach-o files (or archives of mach-o files) built for
different architectures. Previously, the support for fat files was in the
MachOReader, but that only supported fat .o files and dylibs (not archives).
The fix is to put the fat handing into MachOFileNode. That way any input file
kind (including archives) can be fat. MachOFileNode selects the sub-range
of the fat file that matches the arch being linked and creates a MemoryBuffer
for just that subrange.
llvm-svn: 219268
Teach the reader about ARM NT relocation types. Although the writer cannot yet
perform the actual application of these relocations, the reader can at least now
identify the relocation types.
llvm-svn: 219178
Previously, we would not check the target machine type and the module (object)
machine type. Add a check to ensure that we do not attempt to use an object
file with a different target architecture.
This change identified a couple of tests which were incorrectly mixing up
architecture types, using x86 input for a x64 target. Adjust the tests
appropriately. The renaming of the input and the architectures covers the
changes to the existing tests.
One significant change to the existing tests is that the newly added test input
for x64 uses the correct user label prefix for X64.
llvm-svn: 219093
Rather than a series of cascading ifs, use a switch statement to convert the
error code to a string. This has the benefit of allowing the compiler to inform
us if we ever add a new error code but fail to update the string representation.
Add in stringified versions for a couple of missing InputGraphErrors.
llvm-svn: 219089
In order to support more than x86/x86_64, we need to change the behaviour to use
the actual machine type rather than checking the bitness and assuming that we
are on X86. This replaces the use of is64bit in applyAllRelocations with a
check on the machine type. This will enable adding support for handling ARM
relocations.
Rename the existing applyRelocation methods to be similarly named and to make it
clear the types of relocations they will process.
llvm-svn: 219088
This option is added by Xcode when it runs the linker. It produces a binary
file which contains the file the linker used. Xcode uses the info to
dynamically update it dependency tracking.
To check the content of the binary file, the test case uses a python script
to dump the binary file as text which FileCheck can check.
llvm-svn: 219039
When creating the graph edges of the atoms of an ELF file, special care must be
taken with atoms that represent weak symbols. They cannot be the target of any
Reference::kindLayoutAfter edge because they can be merged and point to other
code, screwing up the final layout of the atoms. ELFFile::createAtoms()
correctly handles this corner case. The problem is that createAtoms() assumed
that there can be no zero-sized weak symbols, which is not true. Consider:
my_weak_func1:
my_weak_func2:
my_weak_func3:
code
In this case, we have two zero-sized weak symbols, my_weak_func1 and
my_weak_func2, and one non-zero weak symbol my_weak_func3. createAtoms() would
correctly handle my_weak_func3, but not the first two symbols. This problem
happens in the musl C library when a zero-sized weak symbol is merged and
screws up the file layout. Since this musl code lives at the finalization hooks,
any C program linked with LLD and musl was correctly executing, but segfaulting
at the end.
Reviewers: shankarke
http://reviews.llvm.org/D5606
llvm-svn: 219034
DLL delay importing is a feature to load a DLL lazily, instead of
at program start-up time.
If the feature is turned on with the /delayload flag, the linker
resolves the delay-load helper function. All function pointer table
entries for the DLL are initially pointing to the helper function.
When called, the function loads and resolves the DLL symbols using
dlopen-ish Windows system calls and then write the reuslts to the
function pointer table. The helper function is in "delayimp.lib".
Note that this feature is not completely implemented yet. LLD
also needs to emit the table that's consumed by the delay-load
helper function. That'll be done in another patch.
llvm-svn: 218943
The mergeByContent attribute on DefinedAtoms triggers the symbol table to
coalesce atoms with the exact same content. The problem is that atoms can also
have a required custom section. The coalescing should never change the custom
section of an atom.
The fix is to only consider to atoms to have the same content if their
sectionChoice() and customSectionName() attributes match.
llvm-svn: 218893
This patch adds logic to avoid putting the dynamic linker library (ld.so) as a
DT_NEEDED entry in the dynamic table. It should only appear in PT_INTERP.
This patch fixes SPEC programs 433, 445, 450, 453, 456, 462 when running on
Ubuntu Linux x86_64 and when linking SPEC programs with LLD and glibc 2.19.
http://reviews.llvm.org/D5573
llvm-svn: 218847
Summary: With r218633, the logic that monitors which shared library symbols were used was copied from the MIPS lld backend to ELF classes, making it available to all ELF backends. However, this made the isDynSymEntryRequired() functions in MipsDynamicLibraryWriter.h/MipsELFWriters.h/MipsExecutableWriter.h to be duplicated logic, since this is already implemented in OutputELFWriter<>/DefaultLayout. This patch removes this duplicated code from MIPS.
Reviewers: Bigcheese, shankarke
Reviewed By: shankarke
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5564
llvm-svn: 218846
No functionality change. This removes a down-cast from LinkingContext to
MachOLinkingContext.
Also, remove const from LinkingContext::createImplicitFiles() to remove
the need for another const cast. Seems reasonable for createImplicitFiles()
to need to modify the context (MachOLinkingContext does).
llvm-svn: 218796
The darwin linker has the -demangle option which directs it to demangle C++
(and soon Swift) mangled symbol names. Long term we need some Diagnostics object
for formatting errors and warnings. But for now we have the Core linker just
writing messages to llvm::errs(). So, to enable demangling, I changed the
Resolver to call a LinkingContext method on the symbol name.
To make this more interesting, the demangling code is done via __cxa_demangle()
which is part of the C++ ABI, which is only supported on some platforms, so I
had to conditionalize the code with the config generated HAVE_CXXABI_H.
llvm-svn: 218718
This is yet another edge case of ambiguous name resolution.
When a symbol is specified with /entry:SYM, SYM may be resolved
to the C++ mangled function name (?SYM@@YAXXZ).
llvm-svn: 218706
This is a minimally useful pass to construct the __unwind_info section in a
final object from the various __compact_unwind inputs. Currently it doesn't
produce any compressed pages, only works for x86_64 and will fail if any
function ends up without __compact_unwind.
rdar://problem/18208653
llvm-svn: 218703
MSDN doesn't say about /export:foo=bar style option, but
it turned out MSVC link.exe actually accepts that. So we need that
too.
It also means that the export directive in the module definition
file and /export command line option are functionally equivalent.
llvm-svn: 218695
Summary:
This patch adds support for the general dynamic TLS access model for X86_64 (see www.akkadia.org/drepper/tls.pdf).
To properly support TLS, the patch also changes the __tls_get_addr atom to be a shared library atom instead of a regularly defined atom (the previous lld approach). This closely models the reality of a function that will be resolved at runtime by the dynamic linker and loader itself (ld.so). I was tempted to force LLD to link against ld.so itself to resolve these symbols, but since GNU ld does not need the ld.so library to resolve this symbol, I decided to mimic its behavior and keep hardwired a definition of __tls_get_addr in the lld code.
This patch also moves some important logic that previously was only available to the MIPS lld backend to be used to all ELF backends. This logic, which now lives in the DefaultLayout class, will monitor which external (shared lib) symbols are really imported by the current module and will only populate the dynamic symbol table with used symbols, as opposed to the previous approach of dumping all shared lib symbols in the dynamic symbol table. This is important to this patch to avoid __tls_get_addr from getting injected into all dynamic symbol tables.
By solving the previous problem of always adding __tls_get_addr, now the produced symbol tables are slightly smaller. But this impacted several tests that relied on hardwired/predefined sizes of the symbol table, requiring this patch to update such tests.
Test Plan: Added a LIT test case that exercises a simple use case of TLS variable in a shared library.
Reviewers: ruiu, rafael, Bigcheese, shankarke
Reviewed By: Bigcheese, shankarke
Subscribers: emaste, shankarke, joerg, kledzik, mcrosier, llvm-commits
Projects: #lld
Differential Revision: http://reviews.llvm.org/D5505
llvm-svn: 218633
Previously we emit two or more identical definitions for an
exported symbol if the same /export option is given more than
once. This patch fixes that bug.
llvm-svn: 218433
This patch is difficult to test in isolation, so a subsequent patch will test
further.
Patch by Daniel Stewart <stewartd@codeaurora.org>!
Phabricator Revision: http://reviews.llvm.org/D5377
llvm-svn: 218418
lib.exe prints a warning if a symbol in a module definition file has
both the PRIVATE attribute and an ordinal like this.
EXPORTS
foo @1 PRIVATE
This patch suppresses that.
llvm-svn: 218395
Currently you can omit the leading underscore from exported
symbol name. LLD will look for mangled name for you. But it won't
look for C++ mangled name.
This patch is to support that.
If "sym" is specified to be exported, the linker looks for not
only "sym", but also "_sym" and "?sym@@<whatever>", so that you
can export a C++ function without decorating it.
llvm-svn: 218355
Exported symbol name resolution is two-pass. In the first pass,
we try to resolve that as a regular undefined symbol. If it fails,
we look for mangled name for the symbol and rename the undefined
symbol and try again.
After all name resolution is done, we look for an atom for each
exported symbol again, to construct the export table. In this
process we try the regular names first, and then try mangled names.
But at this moment we should have knew which name is correct.
This patch is to keep the information we get in the first process
to use it later.
llvm-svn: 218354
The export table descriptor is a data structure to keep information
about the export table. It contains a symbol name, and the name may
or may not be mangled.
We need unmangled names for the export table, so we demangle them
before writing them to the export table.
Obviously this is not a correct round-trip conversion. That could
drop a leading underscore from a symbol because that's
indistinguishable from a mangled name.
What we need to do is to keep unmangled names. This patch does that.
llvm-svn: 218345
/machine:ebc was previously recognized but rejected. Unknown architecture
names were handled differently but eventually rejected too. We don't need
to distinguish them.
llvm-svn: 218344
This patch changes the type of export table set from std::set to
std::vector. The new code is slightly inefficient, but because
export table elements are actually mutable, std::vector is better
here. No functionality change.
llvm-svn: 218343
If two or more /export options are given for the same symbol, we should
always print a warning message and use the first one regardless of other
parameters.
Previously there was a case that the first parameter is not used.
llvm-svn: 218342
A symbol in a module definition file may be annotated with the
PRIVATE keyword like this.
EXPORTS
func PRIVATE
The PRIVATE keyword does not affect the resulting .dll file.
But it prevents the symbol to be listed in the .lib (import
library) file.
llvm-svn: 218273
Patch from Rafael Auler!
When a shared lib has an undefined symbol that is defined in a regular object
(the program), the final executable must export this symbol in the dynamic
symbol table. However, in the current logic, lld only puts the symbol in the
dynamic symbol table if the symbol is weak. This patch fixes lld to put the
symbol in the dynamic symbol table regardless if it is weak or not.
This caused a problem in FreeBSD10, whose programs link against a crt1.o
that defines the symbol __progname, which is, in turn, undefined in libc.so.7
and will only be resolved in runtime.
http://reviews.llvm.org/D5424
llvm-svn: 218259
llvm\tools\lld\lib\readerwriter\macho\macholinkingcontext.cpp(647):
warning C4715: 'lld::MachOLinkingContext::exportSymbolNamed' :
not all control paths return a value
llvm\tools\lld\lib\readerwriter\macho\machonormalizedfilefromatoms.cpp(723):
warning C4715: '`anonymous namespace'::Util::getSymbolTableRegion' :
not all control paths return a value
While all enum values do appear in the switch, an uninitialized or corrupted
enum variable would not be caught without the default: case in the switch.
llvm-svn: 218197
Atoms are ordered in the output file by ordinal. File has file ordinal,
and atom has atom ordinal which is unique within the file.
No two atoms should have the same combination of ordinals.
However that contract was not satisifed for alias atoms. Alias atom
is defined by /alternatename:sym1=sym2. In this case sym1 is defined
as an alias for sym2. sym1 always got ordinal 0.
As a result LLD failed with an assertion failure.
This patch assigns ordinal to alias atoms.
llvm-svn: 218158
Cache the machine type value of the linking context. We need this in order to
calculate the virtual address of the atom when resolving function symbols.
Windows on ARM must check if the atom is a function and if so, set the Thumb bit
for the returned virtual address. Failure to do so will result in an abnormal
exit due to a trap caused by invalid instruction decoding. The same information
can be used to determine the relocation type that was previously being done via
is64 to select between x86 and x86_64.
llvm-svn: 218106
Accept /machine:arm as an argument. This is changed to support ARM NT.
Although there is no way to differentiate between ARM (Windows CE) and ARM NT
(Windows on ARM), since LLVM currently only supports Windows on ARM, simply take
/machine:arm to mean Windows on ARM.
llvm-svn: 218105
Rather than saving whether we are targeting 64-bit x86 (x86_64), simply convert
the single use of that information to the actual relocation type. This will
permit the selection of non-x86 relocation types (e.g. for WoA support).
Inline the access of the machine type field as it is relatively cheap (a couple
of pointer dereferences) rather than storing the relocation type as a member
variable.
llvm-svn: 218104
When we encounter an unknown machine type, we print out the machine type magic.
However, we would print out the magic in decimal rather than hex. Perform this
conversion to make it easier to identify what machine is unsupported.
llvm-svn: 218103
This patch fixes a forbidden use of Twine. It should only be used
as an intermediary value, but never stored.
This caused a bug in lld when running on Linux and compiled with
optimizations - it couldn't properly search libs.
Patch from Rafael Auler!
llvm-svn: 218083
I made LLD to report an error if /safeseh:no option is given on x64,
but it turned out MSVC link.exe doesn't report error on it.
Removing the check.
llvm-svn: 218077
The contents from section .CRT$XLA to .CRT$XLZ is an array of function
pointers. They are called by the runtime when a new thread is created
or (gracefully) terminated.
You can make your own initialization function to be called by that
mechanism. All you have to do is:
- Define a pointer to a function in a .CRT$XL* section using pragma
- Make an external reference to "__tls_used" symbol
That technique is used in many projects. This patch is to support that.
What this patch does is to set the relative virtual address of
"__tls_used" to the PECOFF directory table. __tls_used is actually a
struct containing pointers to a symbol in .CRT$XLA and another symbol
in .CRT$XLZ. The runtime looks at the directory table, gets the address
of the struct, and call the function pointers between XLA and XLZ.
llvm-svn: 218007
On darwin, the linker tools records which dylib (DSO) each undefined was found
in, and then at runtime, the loader (dyld) only looks in that one specific
dylib for each undefined symbol. Now that llvm-objdump can display that info
I can write test cases.
llvm-svn: 217898
The provided base must also be a multiple of the system's page size, which is a
reasonable enough demand.
Also check the other diagnostics more thoroughly.
llvm-svn: 217577
The existing system linkers on Darwin and Linux are called "ld". We'd like to
eventually drop in lld as "ld" and have it just work. But lld is a universal
linker that requires the first option to be -flavor to know which command line
mode to emulate (gnu or darwin).
This change tests if argv[0] is "ld" and if so, if the tool was built on MacOSX
then assume the darwin flavor otherwise the gnu flavor. There are two test
cases which copy lld to "ld" and then run it. One for darwin and one for linux.
llvm-svn: 217566
lld shouldn't directly use the COFF header nor should it use raw
coff_symbols. Instead, query the header properties from the
COFFObjectFile and use COFFSymbolRef to abstractly reference COFF
symbols.
This is just enough to get lld compiling with the changes to
llvm::object. Bigobj specific testing will come later.
Differential Revision: http://reviews.llvm.org/D5280
llvm-svn: 217497
Most of the changes are in the new file ArchHandler_arm64.cpp. But a few
things had to be fixed to support 16KB pages (instead of 4KB) which iOS arm64
requires. In addition the StubInfo struct had to be expanded because
arm64 uses two instruction (ADRP/LDR) to load a global which requires two
relocations. The other mach-o arches just needed one relocation.
llvm-svn: 217469
There is a bit (MH_PIE) in the flags field of the mach_header which tells
the kernel is a program was built position independent (for ASLR). The linker
automatically attempts to build programs PIE if they are built for a recent
OS version. But the -pie and -no_pie options override that default behavior.
llvm-svn: 217408
defined in a shared library.
Now LLD does not export a strong defined symbol if it coalesces away a
weak symbol defined in a shared library. This bug affects all ELF
architectures and leads to segfault:
% cat foo.c
extern int __attribute__((weak)) flag;
int foo() { return flag; }
% cat main.c
int flag = 1;
int foo();
int main() { return foo() == 1 ? 0 : -1; }
% clang -c -fPIC foo.c main.c
% lld -flavor gnu -target x86_64 -shared -o libfoo.so ... foo.o
% lld -flavor gnu -target x86_64 -o a.out ... main.o libfoo.so
% ./a.out
Segmentation fault
The problem is caused by the fact that we lose all information about
coalesced symbols after the `Resolver::resolve()` method is finished.
The patch solves the problem by overriding the
`LinkingContext::notifySymbolTableCoalesce()` method and saving names
of coalesced symbols. Later in the `buildDynamicSymbolTable()` routine
we use this information to export these symbols.
llvm-svn: 217363
When a file is not found, produce a proper error message. The previous error
message produced a file format error, which made me wonder for a while why
there is a file format error, but essentially the file was not found.
This fixes the problem by producing a proper error message.
llvm-svn: 217359
By default linker would not create a separate segment to hold read only data.
This option overrides that behavior by creating the a separate read only segment
for read only data.
llvm-svn: 217358
Moved code used only by isDataSymbol from find to isDataSymbol member
function. Also changed the return type of isDataSymbol because
previously "if (isDataSymbol(...))" meant "if it is *not* a data symbol"
which is opposite from what you'd expect.
llvm-svn: 217285
If we are creating a PE+ executable, we need to run cvtres with
/machine:x64 instead of /machine:x86. Otherwise the resulting executable
would be invalid.
llvm-svn: 217214
Mach-O has a "fat" (or "universal") variant where the same contents built for
different architectures are concatenated into one file with a table-of-contents
header at the start. But this leaves a dilemma for the linker - which
architecture to use.
Normally, the linker command line -arch is used to force which slice of any fat
files are used. The clang compiler always passes -arch to the linker when
invoking it. But some Makefiles invoke the linker directly and don’t specify
the -arch option. For those cases, the linker scans all input files in command
line order and finds the first non-fat object file. Whatever architecture it
is becomes the architecture for the link.
llvm-svn: 217189
The use of default: was disabling the warning about unused enumerators. Fix
that, then fix the one enumerator that was not handled. Add coverage for
it in test suite.
llvm-svn: 217078
On Darwin at runtime, dyld will prefer to use the export trie of a dylib instead
of the traditional symbol table (which is large and requires a binary search).
This change enables the linker to generate an export trie and to prefer it if
found in a dylib being linked against. This also simples the yaml for dylibs
because the yaml form of the trie can be reduced to just a sequence of names.
llvm-svn: 217066
I hope this is the last fix for x64 relocations as I've wasted
a few days on this.
This caused a mysterious issue that some C++ programs crash on
startup. It was because a null pointer is passed as argv to main.
__tmainCRTStartup calls main, but before that it calls all
initialization routines between .text$xc_a and .text$xc_z.
pre_cpp_init is one of such routines, and it is the one who
initializes a heap pointer for argv for later use. That routine
was not called for some reason.
It turned out that __tmainCRTStartup was skipping a block of
code because of the relocation bug. A condition in the function
depends on a memory load, and that memory load was referring
a wrong location. As a result a jump instruction took the
wrong branch, skipping pre_cpp_init and so on.
This patch fixes the issue. Also added more tests to fix them
once and for all.
llvm-svn: 216772
When a relocation is applied to a location, the new value needs
to be added to the existing value at the location. Existing
value is in most cases zero, but if not, the current code does
not work.
llvm-svn: 216680
Image Base field in the PE/COFF header is used as hint for the loader.
If the loader can load the executable at the specified address, that's
fine, but if not, it has to load it at a different address.
If that happens, the loader has to fix up the addresses in the
executable by adding the offset. The list of addresses that need to
be fixed is in .reloc section.
This patch is to emit x64 .reloc section contents.
llvm-svn: 216636
Shankar Easwaran