When SelectionDAG expands memcpy (or memmove) call into a sequence of load and store instructions, it disregards dereferenceable flag even the source pointer is known to be dereferenceable.
This results in an assertion failure if SelectionDAG commonizes a load instruction generated for memcpy with another load instruction for the source pointer.
This patch makes SelectionDAG to set the dereferenceable flag for the load instructions properly to avoid the assertion failure.
Differential Revision: https://reviews.llvm.org/D34467
llvm-svn: 306209
This patch links LLVM back-ends into bugpoint the same way they are already
available in 'opt' and 'clang'. This resolves an inconsistency that allowed the
use of LLVM backends in loadable modules that run in 'opt', but that would
prevent the debugging of these modules with bugpoint due to unavailable /
unresolved symbols.
For e.g. In D31859, Polly requires the NVPTX back-end.
Reviewers: hfinkel, bogner, chandlerc, grosser, Meinersbur
Subscribers: bollu, mgorny, grosser, Meinersbur
Tags: #polly
Contributed by: Singapuram Sanjay
Differential Revision: https://reviews.llvm.org/D32003
llvm-svn: 306208
Summary:
m_CombineOr isn't very efficient. The code using it is also quite verbose.
This patch adds m_Shift and m_BitwiseLogic matchers to make the using code more concise and improve the match efficiency.
Reviewers: spatel, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D34593
llvm-svn: 306206
The intention of processFixupValue is not to redefine the semantics of
MCExpr. It is odd enough that a expression lowers to a PCRel MCExpr or
not depending on what it looks like. At least it is a local hack now.
I left a fix for anyone trying to figure out what producers should be
producing a different expression.
llvm-svn: 306200
Summary:
InstCombine replaces large allocas with small globals consts causing buffer overflows
on valid code, see PR33372.
This fix permits this optimization only if the global is dereference for alloca size.
Fixes PR33372
Reviewers: eugenis, majnemer, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34311
llvm-svn: 306194
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
Revert "[ORC] Remove redundant semicolons from DEFINE_SIMPLE_CONVERSION_FUNCTIONS uses."
Revert "[ORC] Move ORC IR layer interface from addModuleSet to addModule and fix the module type as std::shared_ptr<Module>."
They broke ExecutionEngine/OrcMCJIT/test-global-ctors.ll on linux.
llvm-svn: 306176
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
We would return an error in getVaPtr if the RVA table being dumped was
the last data in the .rdata section. Avoid the issue by subtracting one
from the offset and adding it back to get an open interval again.
llvm-svn: 306171
This reverts commit r306157.
It caused some timeouts in clang tests. Perhaps unreachable loops have
far too many phi nodes.
Reverting and investigating.
llvm-svn: 306162
Summary:
Without this patch some types have incorrect size and/or alignment
according to the MSP430 EABI.
Reviewers: asl, awygle
Reviewed By: asl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34561
llvm-svn: 306159
Currently, the implementation of delete dead loops has a special case
when the loop being deleted is never executed. This special case
(updating of exit block's incoming values for phis) can be
run as a prepass for non-executable loops before performing
the actual deletion.
llvm-svn: 306157
The trailing bit methods will early out if they find a bit of the opposite while popcount must always look at all bits. I also assume that more CPUs implement trailing bit counting with native instructions than population count.
llvm-svn: 306154
This is useful when you want to look at a specific chunk of a
stream or look for discontinuities, and you need to know the
list of blocks occupied by a stream.
llvm-svn: 306150
This patch dumps the raw bytes of the pdb name map which contains
the mapping of stream name to stream index for the string table
and other reserved streams.
llvm-svn: 306148
Summary:
opt-stats.py and opt-viewer.py's argument parsers both take a positional
argument 'yaml_files'. Positional arguments in Python's argparse module are
required by default, so the subsequent checks for `len(args.yaml_files) == 0`
are unnecessary -- if the length was zero, then the call to
`parser.parse_args()` would have thrown an error already.
Because there is no way for `len(args.yaml_files)` to be zero at these
points, removing the code is NFC.
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D34567
llvm-svn: 306147
Normally we can only make sense of the content of a PDB in terms
of streams and blocks, but in some cases it may be useful to dump
bytes at a specific absolute file offset. For example, if you
know that some interesting data is at a particular location and
you want to see some surrounding data.
llvm-svn: 306146
This patch contains a pass that transforms CBZ/CBNZ/TBZ/TBNZ instructions into a
conditional branch (Bcc), when the NZCV flags can be set for "free". This is
preferred on targets that have more flexibility when scheduling Bcc
instructions as compared to CBZ/CBNZ/TBZ/TBNZ (assuming all other variables are
equal). This can reduce register pressure and is also the default behavior for
GCC.
A few examples:
add w8, w0, w1 -> cmn w0, w1 ; CMN is an alias of ADDS.
cbz w8, .LBB_2 -> b.eq .LBB0_2 ; single def/use of w8 removed.
add w8, w0, w1 -> adds w8, w0, w1 ; w8 has multiple uses.
cbz w8, .LBB1_2 -> b.eq .LBB1_2
sub w8, w0, w1 -> subs w8, w0, w1 ; w8 has multiple uses.
tbz w8, #31, .LBB6_2 -> b.ge .LBB6_2
In looking at all current sub-target machine descriptions, this transformation
appears to be either positive or neutral.
Differential Revision: https://reviews.llvm.org/D34220.
llvm-svn: 306144
Commit r306010 adjusted the condition as follows:
- if (Is64Bit) {
+ if (!STI.isTargetWin32()) {
The intent was to preserve the behavior on all Windows platforms
but extend the behavior on 64-bit Windows platforms to every
other one. (Before r306010, emitStackProbeCall only ever executed
when emitting code for Windows triples.)
Unfortunately,
if (Is64Bit && STI.isOSWindows())
is not the same as
if (!STI.isTargetWin32())
because of the way isTargetWin32() is defined:
bool isTargetWin32() const {
return !In64BitMode && (isTargetCygMing() ||
isTargetKnownWindowsMSVC());
}
In practice this broke the JIT tests on 32-bit Windows, which did not
satisfy the new condition:
LLVM :: ExecutionEngine/MCJIT/2003-01-15-AlignmentTest.ll
LLVM :: ExecutionEngine/MCJIT/2003-08-15-AllocaAssertion.ll
LLVM :: ExecutionEngine/MCJIT/2003-08-23-RegisterAllocatePhysReg.ll
LLVM :: ExecutionEngine/MCJIT/test-loadstore.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-01-15-AlignmentTest.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-08-15-AllocaAssertion.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-08-23-RegisterAllocatePhysReg.ll
LLVM :: ExecutionEngine/OrcMCJIT/test-loadstore.ll
because %esp was not updated correctly. The failures are only visible
on a MSVC 2017 Debug build, for which we do not have bots.
llvm-svn: 306142