Non-GOT non-PLT relocations to non-preemptible ifuncs result in the
creation of a canonical PLT, which now takes the identity of the IFUNC
in the symbol table. This (a) ensures address consistency inside and
outside the module, and (b) fixes a bug where some of these relocations
end up pointing to the resolver.
Fixes (at least) PR40474 and PR40501.
Differential Revision: https://reviews.llvm.org/D57371
llvm-svn: 353981
R_X86_64_PC{8,16} relocations are sign-extended, so when we check
for relocation overflow, we had to use checkInt instead of checkUInt.
I confirmed that GNU linkers create the same output for the test case.
llvm-svn: 353437
With the following changes:
1) Compilation fix:
std::atomic<bool> HasStaticTlsModel = false; ->
std::atomic<bool> HasStaticTlsModel{false};
2) Adjusted the comment in code.
Initial commit message:
DF_STATIC_TLS flag indicates that the shared object or executable
contains code using a static thread-local storage scheme.
Patch checks if IE/LE relocations were used to check if the code uses
a static model. If so it sets the DF_STATIC_TLS flag.
Differential revision: https://reviews.llvm.org/D57749
----
Modified : /lld/trunk/ELF/Arch/X86.cpp
Modified : /lld/trunk/ELF/Config.h
Modified : /lld/trunk/ELF/SyntheticSections.cpp
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model1.s
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model2.s
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model3.s
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model4.s
Added : /lld/trunk/test/ELF/i386-static-tls-model.s
Modified : /lld/trunk/test/ELF/i386-tls-ie-shared.s
Modified : /lld/trunk/test/ELF/tls-dynamic-i686.s
Modified : /lld/trunk/test/ELF/tls-opt-iele-i686-nopic.s
llvm-svn: 353299
DF_STATIC_TLS flag indicates that the shared object or executable
contains code using a static thread-local storage scheme.
Patch checks if IE/LE relocations were used to check if the code uses
a static model. If so it sets the DF_STATIC_TLS flag.
Differential revision: https://reviews.llvm.org/D57749
llvm-svn: 353293
Guessing that the slashes used in the scripts SECTION command was causing the
windows related failures in the added test.
Original commit message:
Small code model global variable access on PPC64 has a very limited range of
addressing. The instructions the relocations are used on add an offset in the
range [-0x8000, 0x7FFC] to the toc pointer which points to .got +0x8000, giving
an addressable range of [.got, .got + 0xFFFC]. While user code can be recompiled
with medium and large code models when the binary grows too large for small code
model, there are small code model relocations in the crt files and libgcc.a
which are typically shipped with the distros, and the ABI dictates that linkers
must allow linking of relocatable object files using different code models.
To minimze the chance of relocation overflow, any file that contains a small
code model relocation should have its .toc section placed closer to the .got
then any .toc from a file without small code model relocations.
Differential Revision: https://reviews.llvm.org/D56920
llvm-svn: 352071
Small code model global variable access on PPC64 has a very limited range of
addressing. The instructions the relocations are used on add an offset in the
range [-0x8000, 0x7FFC] to the toc pointer which points to .got +0x8000, giving
an addressable range of [.got, .got + 0xFFFC]. While user code can be recompiled
with medium and large code models when the binary grows too large for small code
model, there are small code model relocations in the crt files and libgcc.a
which are typically shipped with the distros, and the ABI dictates that linkers
must allow linking of relocatable object files using different code models.
To minimze the chance of relocation overflow, any file that contains a small
code model relocation should have its .toc section placed closer to the .got
then any .toc from a file without small code model relocations.
Differential Revision: https://reviews.llvm.org/D56920
llvm-svn: 351978
Patch by Michael Skvortsov!
This change adds a basic support for linking static MSP430 ELF code.
Implemented relocation types are intended to correspond to the BFD.
Differential revision: https://reviews.llvm.org/D56535
llvm-svn: 350819
Fixes https://bugs.llvm.org/show_bug.cgi?id=40134
addWrappedSymbols() must be called before addReservedSymbols() because the
latter only defines reserved symbols when they are undefined in the symbol
table. If addWrappedSymbols() is called after, then addUndefined() is called
which may lazily pull in more object files that could reference reserved
symbols.
Differential Revision: https://reviews.llvm.org/D56110
llvm-svn: 350251
When parsing CU ranges for gdb-index, handle the error (now propagated
up though the API lld is calling here - previously the error was
printed within the libDebugInfo API, not allowing lld to format or
handle the message at all) - including information about the object and
archive name, as well as failing the link.
llvm-svn: 349979
gdb-index-multiple-cu-2.s puts the symbol in question to another object file %t1.o, so that its CuIndex is affected by the number of CUs in %t.o
Also change `Kind:` in a comment to `Attributes:` as a follow-up of D54480 and D54481
llvm-svn: 346796
Recommitting https://reviews.llvm.org/rL344544 after fixing undefined behavior
from left-shifting a negative value. Original commit message:
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
llvm-svn: 344622
This reverts commit https://reviews.llvm.org/rL344544, which causes failures on
a undefined behaviour sanitizer bot -->
lld/ELF/Arch/PPC64.cpp:849:35: runtime error: left shift of negative value -1
llvm-svn: 344551
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
Differential Revision: https://reviews.llvm.org/D52099
llvm-svn: 344544
The access sequence for global variables in the medium and large code models use
2 instructions to add an offset to the toc-pointer. If the offset fits whithin
16-bits then the instruction that sets the high 16 bits is redundant.
This patch adds the --toc-optimize option, (on by default) and enables rewriting
of 2 instruction global variable accesses into 1 when the offset from the
TOC-pointer to the variable (or .got entry) fits in 16 signed bits. eg
addis %r3, %r2, 0 --> nop
addi %r3, %r3, -0x8000 --> addi %r3, %r2, -0x8000
This rewriting can be disabled with the --no-toc-optimize flag
Differential Revision: https://reviews.llvm.org/D49237
llvm-svn: 342602
This patch adds the target call back relaxTlsIeToLe to support TLS relaxation
from initial exec to local exec model.
Differential Revision: https://reviews.llvm.org/D48091
llvm-svn: 340281
During copy relocation of a variable defined in a DSO, if a TLS variable in that DSO happens to have the same st_value, it would also be copied. This was unnecessary because the addresses of TLS variables are relative to TLS segment. They don't interfere with non-TLS variables.
This copying behavior can be harmful in the following scenario:
For function-scope thread-local variables with non-trivial constructors,
they have guard variables. In the case of x86_64 general-dynamic model:
template <int N>
void foo() {
thread_local std::string a;
}
GOT[n] R_X86_64_DTPMOD64 guard variable for a
GOT[n+1] R_X86_64_DTPOFF64 guard variable for a
GOT[n+2] R_X86_64_DTPMOD64 a
GOT[n+3] R_X86_64_DTPOFF64 a
a and its guard variable are both represented as TLS variables, which
should be within the same module. If one is copy relocated to the main
module while the other is not, their module ID will mismatch and can
cause access without prior construction.
Reviewers: ruiu, espindola
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D50289
llvm-svn: 339042
The Tag_ABI_VFP_args build attribute controls the procedure call standard
used for floating point parameters on ARM. The values are:
0 - Base AAPCS (FP Parameters passed in Core (Integer) registers
1 - VFP AAPCS (FP Parameters passed in FP registers)
2 - Toolchain specific (Neither Base or VFP)
3 - Compatible with all (No use of floating point parameters)
If the Tag_ABI_VFP_args build attribute is missing it has an implicit value
of 0.
We use the attribute in two ways:
- Detect a clash in calling convention between Base, VFP and Toolchain.
we follow ld.bfd's lead and do not error if there is a clash between an
implicit Base AAPCS caused by a missing attribute. Many projects
including the hard-float (VFP AAPCS) version of glibc contain assembler
files that do not use floating point but do not have Tag_ABI_VFP_args.
- Set the EF_ARM_ABI_FLOAT_SOFT or EF_ARM_ABI_FLOAT_HARD ELF header flag
for Base or VFP AAPCS respectively. This flag is used by some ELF
loaders.
References:
- Addenda to, and Errata in, the ABI for the ARM Architecture for
Tag_ABI_VFP_args
- Elf for the ARM Architecture for ELF header flags
Fixes PR36009
Differential Revision: https://reviews.llvm.org/D49993
llvm-svn: 338377
If we fail to merge a secondary GOT with the primary GOT but so far only
one merged GOT has been created (the primary one), the final element in
MergedGots is the primary GOT. Thus we should not try to merge with this
final element passing IsPrimary=false, since this will ignore the fact
that the destination GOT does in fact need a header, and those extra two
entries can be enough to allow the merge to incorrectly occur. Instead
we should check for this case before attempting the second merge.
Patch by James Clarke.
Differential revision: https://reviews.llvm.org/D49422
llvm-svn: 337810
Archives created with ThinLTO are bitcodes, they also need to be searched for excluded symbols.
Differential Revision: https://reviews.llvm.org/D48857
llvm-svn: 336826
ELF spec doesn't allow a relocation to point to a deduplicated
COMDAT section. Unfortunately this happens in practice (e.g. .eh_frame)
We have a code in MarkLive.cpp for that and it was uncovered by any test case:
https://github.com/llvm-mirror/lld/blob/master/ELF/MarkLive.cpp#L199
Patch adds a test.
llvm-svn: 336259
In glibc libc.so.6, the multiple versions of sys_errlist share the same Symbol instance. When sys_errlist is copy relocated, we would replace SharedSymbol with Defined in the first iteration of the following loop:
for (SharedSymbol *Sym : getSymbolsAt<ELFT>(SS))
Then in the second iteration, we think the symbol (which has been changed to Defined) is still SharedSymbol and screw up (the address ends up in the `Size` field).
llvm-svn: 334432
Almost all entries inside MIPS GOT are referenced by signed 16-bit
index. Zero entry lies approximately in the middle of the GOT. So the
total number of GOT entries cannot exceed ~16384 for 32-bit architecture
and ~8192 for 64-bit architecture. This limitation makes impossible to
link rather large application like for example LLVM+Clang. There are two
workaround for this problem. The first one is using the -mxgot
compiler's flag. It enables using a 32-bit index to access GOT entries.
But each access requires two assembly instructions two load GOT entry
index to a register. Another workaround is multi-GOT. This patch
implements it.
Here is a brief description of multi-GOT for detailed one see the
following link https://dmz-portal.mips.com/wiki/MIPS_Multi_GOT.
If the sum of local, global and tls entries is less than 64K only single
got is enough. Otherwise, multi-got is created. Series of primary and
multiple secondary GOTs have the following layout:
```
- Primary GOT
Header
Local entries
Global entries
Relocation only entries
TLS entries
- Secondary GOT
Local entries
Global entries
TLS entries
...
```
All GOT entries required by relocations from a single input file
entirely belong to either primary or one of secondary GOTs. To reference
GOT entries each GOT has its own _gp value points to the "middle" of the
GOT. In the code this value loaded to the register which is used for GOT
access.
MIPS 32 function's prologue:
```
lui v0,0x0
0: R_MIPS_HI16 _gp_disp
addiu v0,v0,0
4: R_MIPS_LO16 _gp_disp
```
MIPS 64 function's prologue:
```
lui at,0x0
14: R_MIPS_GPREL16 main
```
Dynamic linker does not know anything about secondary GOTs and cannot
use a regular MIPS mechanism for GOT entries initialization. So we have
to use an approach accepted by other architectures and create dynamic
relocations R_MIPS_REL32 to initialize global entries (and local in case
of PIC code) in secondary GOTs. But ironically MIPS dynamic linker
requires GOT entries and correspondingly ordered dynamic symbol table
entries to deal with dynamic relocations. To handle this problem
relocation-only section in the primary GOT contains entries for all
symbols referenced in global parts of secondary GOTs. Although the sum
of local and normal global entries of the primary got should be less
than 64K, the size of the primary got (including relocation-only entries
can be greater than 64K, because parts of the primary got that overflow
the 64K limit are used only by the dynamic linker at dynamic link-time
and not by 16-bit gp-relative addressing at run-time.
The patch affects common LLD code in the following places:
- Added new hidden -mips-got-size flag. This flag required to set low
maximum size of a single GOT to be able to test the implementation using
small test cases.
- Added InputFile argument to the getRelocTargetVA function. The same
symbol referenced by GOT relocation from different input file might be
allocated in different GOT. So result of relocation depends on the file.
- Added new ctor to the DynamicReloc class. This constructor records
settings of dynamic relocation which used to adjust address of 64kb page
lies inside a specific output section.
With the patch LLD is able to link all LLVM+Clang+LLD applications and
libraries for MIPS 32/64 targets.
Differential revision: https://reviews.llvm.org/D31528
llvm-svn: 334390
The original computation for shared object symbol alignment is wrong when
st_value equals 0. It is very unusual for dso symbols to have st_value equal 0.
But when it happens, it causes obscure run time bugs.
Differential Revision: https://reviews.llvm.org/D47602
llvm-svn: 334135
If a symbol with an undefined version in a DSO is not going to be
exported into the dynamic symbol table then do not give an error message
for the missing version. This can happen with the --exclude-libs option
which implicitly gives all symbols in a static library the local version.
This matches the behavior of ld.gold and is exploited by the Bionic
dynamic linker on Arm.
Differential Revision: https://reviews.llvm.org/D43126
llvm-svn: 332224
Reviewed by: ruiu, grimar, espindola
Differential Revision: https://reviews.llvm.org/D44562
Summary:
r331971 changes the debug line parser interface to report LLVM errors in an
interface that different executables can use, rather than always being printed
directly as warnings to stderr. This change allows LLD to make use of the new
interface and call its own warning methods to report problems.
llvm-svn: 331972
Some MIPS relocations depend on "gp" value. By default, this value has
0x7ff0 offset from a .got section. But relocatable files produced by a
compiler or a linker might redefine this default value and we have to
use it for a calculation of the relocation result. When we generate EXE
or DSO it's trivial. Generating a relocatable output is more difficult
case because the linker does calculate relocations in this case and
cannot store individual "gp" values used by each input object file.
As a workaround we add the "gp" value to the relocation addend.
This fixes https://llvm.org/pr31149
Differential revision: https://reviews.llvm.org/D45972
llvm-svn: 331772
The current support for V1 ABI in LLD is incomplete.
This patch removes V1 ABI support and changes the default behavior to V2 ABI,
issuing an error when using the V1 ABI. It also updates the testcases to V2
and removes any V1 specific tests.
Differential Revision: https://reviews.llvm.org/D46316
llvm-svn: 331529
PPC64 V2 ABI describes two entry points to a function. The global entry point
sets up the TOC base pointer. When calling a local function, the call should
branch to the local entry point rather than the global entry point.
Section 3.4.1 describes using the 3 most significant bits of the st_other
field to find out how many instructions there are between the local and global
entry point. This patch adds the correct offset required to branch to the local
entry point of a function.
Differential Revision: https://reviews.llvm.org/D45729
llvm-svn: 331046
The PPC64 V2 ABI restores the toc base by loading from an offset of 24 from r1.
This patch fixes the offset and updates the testcases from V1 to V2. It also
issues an error when a nop is missing after a call to an external function.
Differential Revision: https://reviews.llvm.org/D45892
llvm-svn: 330600
George Rimar