Clang's <stddef.h> provides definitions for the C standard library
types size_t, ptrdiff_t, and wchar_t. However, the system's C standard
library headers tend to provide the same typedefs, and the two
generally avoid each other using the macros
_SIZE_T/_PTRDIFF_T/_WCHAR_T. With modules, however, we need to see
*all* of the places where these types are defined, so provide the
typedefs (ignoring the macros) when modules are enabled.
llvm-svn: 177686
Configuration macros are macros that are intended to alter how a
module works, such that we need to build different module variants
for different values of these macros. A module can declare its
configuration macros, in which case we will complain if the definition
of a configation macro on the command line (or lack thereof) differs
from the current preprocessor state at the point where the module is
imported. This should eliminate some surprises when enabling modules,
because "#define CONFIG_MACRO ..." followed by "#include
<module/header.h>" would silently ignore the CONFIG_MACRO setting. At
least it will no longer be silent about it.
Configuration macros are eventually intended to help reduce the number
of module variants that need to be built. When the list of
configuration macros for a module is exhaustive, we only need to
consider the settings for those macros when building/finding the
module, which can help isolate modules for various project-specific -D
flags that should never affect how modules are build (but currently do).
llvm-svn: 177466
The global module index was querying the file manager for each of the
module files it knows about at load time, to prune out any out-of-date
information. The file manager would then cache the results of the
stat() falls used to find that module file.
Later, the same translation unit could end up trying to import one of the
module files that had previously been ignored by the module cache, but
after some other Clang instance rebuilt the module file to bring it
up-to-date. The stale stat() results in the file manager would
trigger a second rebuild of the already-up-to-date module, causing
failures down the line.
The global module index now lazily resolves its module file references
to actual AST reader module files only after the module file has been
loaded, eliminating the stat-caching race. Moreover, the AST reader
can communicate to its caller that a module file is missing (rather
than simply being out-of-date), allowing us to simplify the
module-loading logic and allowing the compiler to recover if a
dependent module file ends up getting deleted.
llvm-svn: 177367
This commit introduces a set of related changes to ensure that the
declaration that shows up in the identifier chain after deserializing
declarations with a given identifier is, in fact, the most recent
declaration. The primary change involves waiting until after we
deserialize and wire up redeclaration chains before updating the
identifier chains. There is a minor optimization in here to avoid
recursively deserializing names as part of looking to see whether
top-level declarations for a given name exist.
A related change that became suddenly more urgent is to property
record a merged declaration when an entity first declared in the
current translation unit is later deserialized from a module (that had
not been loaded at the time of the original declaration). Since we key
off the canonical declaration (which is parsed, not from an AST file)
for emitted redeclarations, we simply record this as a merged
declaration during AST writing and let the readers merge them.
Re-fixes <rdar://problem/13189985>, presumably for good this time.
llvm-svn: 175447
the linkage of functions and variables while merging declarations from modules,
and we don't necessarily have enough of the rest of the AST loaded at that
point to allow us to compute linkage, so serialize it instead.
llvm-svn: 174943
lexical storage but not visible storage' case in C++. It's unclear whether we
even need the special-case handling for C++, since it seems to be working
around our not serializing a lookup table for the TU in C. But in any case,
the assertion is incorrect.
llvm-svn: 174931
These two related tweaks to keep the information associated with a
given identifier correct when the identifier has been given some
top-level information (say, a top-level declaration) and more
information is then loaded from a module. The first ensures that an
identifier that was "interesting" before being loaded from an AST is
considered to be different from its on-disk counterpart. Otherwise, we
lose such changes when writing the current translation unit as a
module.
Second, teach the code that injects AST-loaded names into the
identifier chain for name lookup to keep the most recent declaration,
so that we don't end up confusing our declaration chains by having a
different declaration in there.
llvm-svn: 174895
visible.
The basic problem here is that a given translation unit can use
forward declarations to form pointers to a given type, say,
class X;
X *x;
and then import a module that includes a definition of X:
import XDef;
We will then fail when attempting to access a member of X, e.g.,
x->method()
because the AST reader did not know to look for a default of a class
named X within the new module.
This implementation is a bit of a C-centric hack, because the only
definitions that can have this property are enums, structs, unions,
Objective-C classes, and Objective-C protocols, and all of those are
either visible at the top-level or can't be defined later. Hence, we
can use the out-of-date-ness of the name and the identifier-update
mechanism to force the update.
In C++, we will not be so lucky, and will need a more advanced
solution, because the definitions could be in namespaces defined in
two different modules, e.g.,
// module 1
namespace N { struct X; }
// module 2
namespace N { struct X { /* ... */ }; }
One possible implementation here is for C++ to extend the information
associated with each identifier table to include the declaration IDs
of any definitions associated with that name, regardless of
context. We would have to eagerly load those definitions.
llvm-svn: 174794
included in the same test. Clang gets confused about whether it's already built
a module for this file, when running on a content-addressible filesystem.
llvm-svn: 174694
overloads of a name by claiming that there are no lookup results for that name
in modules while loading the names from the module. Lookups in deserialization
really don't want to find names which they themselves are in the process of
introducing. This also has the pleasant side-effect of automatically caching
PCH lookups which found no names.
The runtime here is still quadratic in the number of overloads, but the
constant is lower.
llvm-svn: 174685
name lookup has been performed in that context (this probably only happens in
C++).
1) Whenever we add names to a context, set a flag on it, and if we perform
lookup and discover that the context has had a lookup table built but has the
flag set, update all entries in the lookup table with additional names from
the external source.
2) When marking a DeclContext as having external visible decls, mark the
context in which lookup is performed, not the one we are adding. These won't
be the same if we're adding another copy of a pre-existing namespace.
llvm-svn: 174577
This can happen when one abuses precompiled headers by passing more -D
options when using a precompiled hedaer than when it was built. This
is intentionally permitted by precompiled headers (and is exploited by
some build environments), but causes problems for modules.
First part of <rdar://problem/13165109>, detecting when something when
horribly wrong.
llvm-svn: 174554
Different modules may have different views of the various "special"
types in the AST, such as the redefinition type for "id". Merge those
types rather than only considering the redefinition types for the
first AST file loaded.
llvm-svn: 174234
consider (sub)module visibility.
The bulk of this change replaces myriad hand-rolled loops over the
linked list of Objective-C categories/extensions attached to an
interface declaration with loops using one of the four new category
iterator kinds:
visible_categories_iterator: Iterates over all visible categories
and extensions, hiding any that have their "hidden" bit set. This is
by far the most commonly used iterator.
known_categories_iterator: Iterates over all categories and
extensions, ignoring the "hidden" bit. This tends to be used for
redeclaration-like traversals.
visible_extensions_iterator: Iterates over all visible extensions,
hiding any that have their "hidden" bit set.
known_extensions_iterator: Iterates over all extensions, whether
they are visible to normal name lookup or not.
The effect of this change is that any uses of the visible_ iterators
will respect module-import visibility. See the new tests for examples.
Note that the old accessors for categories and extensions are gone;
there are *Raw() forms for some of them, for those (few) areas of the
compiler that have to manipulate the linked list of categories
directly. This is generally discouraged.
Part two of <rdar://problem/10634711>.
llvm-svn: 172665
will have a shared library with the same name as its framework (and no
suffix!) within its .framework directory. Detect this both when
inferring the whole top-level framework and when parsing a module map.
llvm-svn: 172439
metadata for linking against the libraries/frameworks for imported
modules.
The module map language is extended with a new "link" directive that
specifies what library or framework to link against when a module is
imported, e.g.,
link "clangAST"
or
link framework "MyFramework"
Importing the corresponding module (or any of its submodules) will
eventually link against the named library/framework.
For now, I've added some placeholder global metadata that encodes the
imported libraries/frameworks, so that we can test that this
information gets through to the IR. The format of the data is still
under discussion.
llvm-svn: 172437
(because they are part of some module) but have not been made visible
(because they are in a submodule that wasn't imported), filter out
those declarations unless both the old declaration and the new
declaration have external linkage. When one or both has internal
linkage, there should be no conflict unless both are imported.
llvm-svn: 171925
allowing a module map to be placed one level above the '.framework'
directories to specify that all .frameworks within that directory can
be inferred as framework modules. One can also specifically exclude
frameworks known not to work.
This makes explicit (and more restricted) behavior modules have had
"forever", where *any* .framework was assumed to be able to be built
as a module. That's not necessarily true, so we white-list directories
(with exclusions) when those directories have been audited.
llvm-svn: 167482
token. This is important because the first token could actually be
after an #include that triggers a module import, which might use
either Sema or the AST consumer before it would have been initialized.
llvm-svn: 167423
description. Previously, one could emulate this behavior by placing
the header in an always-unavailable submodule, but Argyrios guilted me
into expressing this idea properly.
llvm-svn: 165921
macro history.
When deserializing macro history, we arrange history such that the
macros that have definitions (that haven't been #undef'd) and are
visible come at the beginning of the list, which is what the
preprocessor and other clients of Preprocessor::getMacroInfo()
expect. If additional macro definitions become visible later, they'll
be moved toward the front of the list. Note that it's possible to have
ambiguities, but we don't diagnose them yet.
There is a partially-implemented design decision here that, if a
particular identifier has been defined or #undef'd within the
translation unit, that definition (or #undef) hides any macro
definitions that come from imported modules. There's still a little
work to do to ensure that the right #undef'ing happens.
Additionally, we'll need to scope the update records for #undefs, so
they only kick in when the submodule containing that update record
becomes visible.
llvm-svn: 165682
MacroInfo*. Instead of simply dumping an offset into the current file,
give each macro definition a proper ID with all of the standard
modules-remapping facilities. Additionally, when a macro is modified
in a subsequent AST file (e.g., #undef'ing a macro loaded from another
module or from a precompiled header), provide a macro update record
rather than rewriting the entire macro definition. This gives us
greater consistency with the way we handle declarations, and ties
together macro definitions much more cleanly.
Note that we're still not actually deserializing macro history (we
never were), but it's far easy to do properly now.
llvm-svn: 165560
whether that function/method already has a body (loaded from some
other AST file), as introduced in r165137. Delay this check until
after the redeclaration chains have been wired up.
While I'm here, make the loading of method bodies lazy.
llvm-svn: 165513
This is especially relevant for templatedDecls that might be injected (and thus have their DeclContext set to) somewhere completely different.
llvm-svn: 165005
Check whether a pending instantiation needs to be instantiated (or whether an instantiation already exists).
Verify the size of the PendingInstantiations record (was only checking size of existing PendingInstantiations).
Migrate Obj-C++ part of redecl-merge into separate test, now that this is growing.
templates.mm: test that CodeGen has seen exactly one definition of template instantiations.
redecl-merge.m: use "@" specifier for expected-diagnostics.
llvm-svn: 164993
Lookup can nevertheless find them due to the serialized lookup table.
For instance when reading a template decl's templatedDecl, it will search for existing decls that it could be a redeclaration of, and find the half-read template decl.
Thus there is no point in asserting the names of decls.
llvm-svn: 164932
specific module (__building_module(modulename)) and to get the name of
the current module as an identifier (__MODULE__).
Used to help headers behave differently when they're being included as
part of building a module. Oh, the irony.
llvm-svn: 164605
The old behavior was to re-scan any files (like modules) where we may have
directives but won't actually be parsing during the -verify invocation.
Now, we keep the old behavior in Debug builds as a sanity check (though
modules are a known entity), and expect all legitimate directives to come
from comments seen by the preprocessor.
This also affects the ARC migration tool, which captures diagnostics in
order to filter some out. This change adds an explicit cleanup to
CaptureDiagnosticsConsumer in order to let its sub-consumer handle the
real end of diagnostics.
This was originally split into four patches, but the tests do not run
cleanly without all four, so I've combined them into one commit.
Patches by Andy Gibbs, with slight modifications from me.
llvm-svn: 161650
This is accomplished by making VerifyDiagnosticsConsumer a CommentHandler,
which then only reads the -verify directives that are actually in live
blocks of code. It also makes it simpler to handle -verify directives that
appear in header files, though we still have to manually reparse some files
depending on how they are generated.
This requires some test changes. In particular, all PCH tests now have their
-verify directives outside the "header" portion of the file, using the @line
syntax added in r159978. Other tests have been modified mostly to make it
clear what is being tested, and to prevent polluting the expected output with
the directives themselves.
Patch by Andy Gibbs! (with slight modifications)
The new Frontend/verify-* tests exercise the functionality of this commit,
as well as r159978, r159979, and r160053 (Andy's other -verify enhancements).
llvm-svn: 160068
Douglas Gregor