This ensures that all spawned dotest instances store their traces
in the same location.
Test Plan:
run dosep.py with and without a -s option for dotest
cd lldb/test
./dosep.py
./dosep.py -o '-s /tmp/traces'
Differential Revision: http://reviews.llvm.org/D9839
llvm-svn: 237923
ModuleSpecs::FindMatchingModuleSpec looks for matching filenames but when
looking for the dSYM we should only be looking for a matching architecture and
and UUID. Jason pointed out this mistake in http://reviews.llvm.org/D9174 when
this function was incorrectly converted to not be Mac specific.
Test Plan:
Running LLDB on test/lang/c/shared_lib_stripped_symbols/a.out in a debugger I've
verified LocateDSYMInVincinityOfExecutable correctly locates the matching dSYM.
Differential Revision: http://reviews.llvm.org/D9896
llvm-svn: 237907
This is neccessary for evaluating expressions with float/double return
value and for displaying float/double return values in case of a thread
step out.
Differential revision: http://reviews.llvm.org/D9907
llvm-svn: 237900
Summary:
Previously, NPL tried to reinject SIGSTOP into the inferior in an attempt to get the process to
start in the group-stop state. This was:
a) wrong (reinjection should be controlled by "process handle" lldb setting)
b) racy (it should use Resume for transparent resuming instead of RequestResume)
c) broken (llgs crashed on inferior SIGSTOP)
With this change, SIGSTOP is handled just like any other signal delivered to the inferior: we
stop all threads and report signal reception to lldb. SIGSTOP reinjection does not behave the
same way as it would outside the debugger, but simulating this is a hard problem and is not
normally necessary.
Test Plan: I have added a test which verifies we get SIGSTOP reports and we do not crash.
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9852
llvm-svn: 237880
breakpoint only if the process it was for is still alive. We need to always remove this because
it has a pointer to the old loader, and if we ever hit it we will crash. I also put in a sanity
check in the callback function to make sure we don't invoke it if the process is wrong.
<rdar://problem/21006189>
llvm-svn: 237866
Summary: It should default to working-dir/src-filename if dst is not specified.
Reviewers: clayborg, flackr
Reviewed By: flackr
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9890
llvm-svn: 237831
Summary:
The test in TestPlatformCommand which runs "platform process list" has
been timing out for Android when running running dosep.py with
LLDB_TEST_THREADS=8. This patch increases the packet timeout to a large
value of 1min to accommodate the long time required for a response for
the qfProcessInfo packet on Android.
Test Plan: LLDB_TEST_THREADS=8 ./dosep.py on Android.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9866
llvm-svn: 237752
It turns out, child values also need similar provisions
This patch simplifies things a bit allowing ValueObject subclasses to just declare whether they can accept an invalid context at update time, and letting the update machinery in the EvaluationPoint to the rest
Also, this lets ValueObjectChild proclaim that its parent chooses whether such blank-slate updates are possible
llvm-svn: 237714
dotest will select clang-3.5 by default and fall back on clang/gcc
dotest will look for the lldb executable in the typical cmake
output locations:
{lldb}/../../../build/bin (next to llvm directory)
{lldb}/../../../build/host/bin (next to llvm directory)
{lldb}/../build/bin (next to lldb directory)
{lldb}/../build/host/bin (next to lldb directory)
llvm-svn: 237632
The lldb executable was referenced through the code by 7 different
(effectively) global variables.
global lldbExecutablePath
global lldbExecutable
os.environ['LLDB_EXEC']
os.environ['LLDB_TEST']
dotest.lldbExec
dotest.lldbHere
lldbtest.lldbExec
This change uses one global variable lldbtest_config.lldbExec to
replace them all.
Differential Revision: http://reviews.llvm.org/D9817
llvm-svn: 237600
This patch initially was committed in r237460 but later it was reverted (r237479) due to 4 new failures:
* TestExitDuringStep.py
* TestNumThreads.py
* TestThreadExit.py
* TestThreadStates.py
This patch also fixes these tests.
llvm-svn: 237566
And they also do not have a thread/frame attached to them
That makes dynamic and synthetic values attached to them impossible to update - which, among other things, makes it impossible to properly display persistent variables of types that could have such dynamic/persistent values
Fix this by making it so that a ValueObject can control its constantness (hint: dynamic and synthetic values cannot be constant) and whether it wants to let itself be updated when an invalid thread is around
llvm-svn: 237504
In http://reviews.llvm.org/D9754 I enabled the mangled symbol name lookup
workaround used to find global and anonymous namespace symbols in linux binaries
for all platforms, however we should still only check for these symbols when
processing Linux or FreeBSD binaries where they are relevant. This patch makes
this change.
Test Plan: The tests from the original revision still pass:
TestCallCPPFunction.py
TestCallStopAndContinue.py
TestExprs.py
TestExprsChar.py
TestNamespace.py
TestOverloadedFunctions.py
TestRvalueReferences.py
TestThreadExit.py
Differential Revision: http://reviews.llvm.org/D9782
llvm-svn: 237467
When compiling programs for the test suite we currently choose which stdlib to
use based on the host platform, but should be basing this on the target
platform.
Test Plan: ./dotest.py $DOTEST_OPTS -t -p TestThreadExit.py
This test previously failed mac->linux most of the time due to using the mac
host's atomic declaration.
Differential Revision: http://reviews.llvm.org/D9797
llvm-svn: 237466
Summary:
This option forces to only set a source line breakpoint when there is an exact-match
This patch includes the following commits:
# Add the -m/--exact-match option in "breakpoint set" command
## Add exact_match arg in BreakpointResolverFileLine ctor
## Add m_exact_match field in BreakpointResolverFileLine
## Add exact_match arg in BreakpointResolverFileRegex ctor
## Add m_exact_match field in BreakpointResolverFileRegex
## Add exact_match arg in Target::CreateSourceRegexBreakpoint
## Add exact_match arg in Target::CreateBreakpoint
## Add -m/--exact-match option in "breakpoint set" command
# Add target.exact-match option to skip BP if source line doesn't match
## Add target.exact-match global option
## Add Target::GetExactMatch
## Refactor Target::CreateSourceRegexBreakpoint to accept LazyBool exact_match (was bool)
## Refactor Target::CreateBreakpoint to accept LazyBool exact_match (was bool)
# Add target.exact-match test in SettingsCommandTestCase
# Add BreakpointOptionsTestCase tests to test --skip-prologue/--exact-match options
# Fix a few typos in lldbutil.check_breakpoint_result func
# Rename --exact-match/m_exact_match/exact_match/GetExactMatch to --move-to-nearest-code/m_move_to_nearest_code/move_to_nearest_code/GetMoveToNearestCode
# Add exact_match field in BreakpointResolverFileLine::GetDescription and BreakpointResolverFileRegex::GetDescription, for example:
was:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
now:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, exact_match = 0, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
Test Plan:
./dotest.py -v --executable $BUILDDIR/bin/lldb functionalities/breakpoint/
./dotest.py -v --executable $BUILDDIR/bin/lldb settings/
./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/breakpoint/
Reviewers: jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, jingham
Differential Revision: http://reviews.llvm.org/D9273
llvm-svn: 237460
Summary:
There was an issue in NPL, where we attempted removal of temporary breakpoints (used to implement
software single stepping), while some threads of the process were running. This is a problem
since we currently always use the main thread's ID in the removal ptrace call. Therefore, if the
main thread was still running, the ptrace call would fail, and the software breakpoint would
remain, causing all kinds of problems. This change removes the breakpoints after all threads have
stopped. This fixes TestExitDuringStep on Android arm and can also potentially help in other
situations, as previously the breakpoint would not get removed if the thread stopped for another
reason.
Test Plan: TestExitDuringStep passes, other tests remain unchanged.
Reviewers: tberghammer
Subscribers: tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D9792
llvm-svn: 237448
Summary:
This is the same issue as we had in D9145 for thread creation. Going through the full
ThreadDidStop/RequestResume cycle can cause a deferred notification to fire, which is not correct
when we are ignoring an event and resuming the thread. In this case it doesn't matter much since
the thread will die after that anyway, but for correctness, we should do the same thing here.
Also treating the SIGTRAP case the same way.
Test Plan: Tests continue to pass.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9696
llvm-svn: 237445
TestPluginCommands.py attempts to build a library which links against the host
built lldb library. This will only work if the remote is compatible with
binaries produced by the host.
Test Plan:
./dotest.py $DOTEST_OPTS -v -t -p TestPluginCommands.py
Test is skipped if remote platform is incompatible with host platform (i.e. mac
-> linux).
Differential Revision: http://reviews.llvm.org/D9770
llvm-svn: 237444
r237411 exposed the following issue: ProcessGDBRemote used the description field in the
stop-reply to set the description of the StopInfo. In the case of watchpoints, the packet
description contains the raw address that got hit, which is not exactly the information we want
to display to the user as the stop info. Therefore, I have changed the code to use the packet
description only if the StopInfo does not already have a description. This makes the behavior
equivalent to the pre-r237411 behavior as then the SetDecription call got ignored for
watchpoints.
llvm-svn: 237436
# Add CMICmdArgValPrintValues argument
# Rework -stack-list-arguments/-stack-list-locals/-stack-list-variables/-var-update/-var-list-children
commands to use the CMICmdArgValPrintValues argument instead of usage of pair of non-mandatory
arguments like: CMICmdArgValNumber(0) || CMICmdArgValLongOptions("no-values")
llvm-svn: 237429
Summary:
Implementation of assembly profiler for MIPS32 using EmulateInstruction which currently scans only prologue/epilogue assembly instructions. It uses llvm::MCDisassembler to decode assembly instructions.
Reviewers: clayborg, jasonmolenda
Differential Revision: http://reviews.llvm.org/D9769
llvm-svn: 237420
Remove the m_description ivar from the StopInfoBreakpoint
and StopInfoWatchpoint subclasses of StopInfo. Also,
initialize the m_description ivar in the StopInfo ctor.
<rdar://problem/20902950>
llvm-svn: 237411
This API has been present since XP, and I think it's safe to
drop support for XP (since other things have been introduced long
ago which already don't work on XP anyway).
With this patch, we can statically bind against the exports and
not bother falling back to a CRITICAL_SECTION if we can't load
the API.
llvm-svn: 237402
Summary:
Android API-9 does not have sys/signal.h. However, all sys/signal.h
has when present is an include of signal.h.
Test Plan: dotest.py -p TestSendSignal on linux and Android.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9779
llvm-svn: 237381
Summary:
One cannot use mknod or mkfifo on user Android devices. This commit
changes the use of pipe to a file to synchronize between the inferior
and the test.
Test Plan: dotest.py -P TestAttachDenied
Reviewers: ovyalov, chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9768
llvm-svn: 237328
lock imports fcntl, which doesn't exist on Windows. If we need
to use this class on Windows, we will need to implement something
based on the CreateMutex API.
llvm-svn: 237292
Select expected remote libc++ library name based on remote platform. This is
used to verify libc++ is in the loaded image list by various tests which use it.
Test Plan:
Passes the following tests mac -> linux with this patch:
TestDataFormatterLibccIterator.py
TestDataFormatterLibccMap.py
TestDataFormatterLibccMultiMap.py
TestDataFormatterLibcxxMultiSet.py
TestDataFormatterLibcxxSet.py
TestDataFormatterUnordered.py
Differential Revision: http://reviews.llvm.org/D9759
llvm-svn: 237288
Someone must have changed the behavior of FileSpec slightly
relating to whether or not there is a trailing backslash when calling
GetPath() and GetDirectory(). This caused ScriptInterpreterPython
to find the wrong values when initializing sys.path, and as a result
we couldn't find the lldb module.
This patch fixes the issue, and also adds a test to make sure that
GetDirectory() does not return a string containing a trailing slash.
llvm-svn: 237282
There were two versions of DoAttachToprocessWithId. One that takes
a pid_t, and the other which takes a pid_t and a ProcessAttachInfo.
There were no callers of the former version, and all of the
implementations of this version were simply forwarding calls to
one version or the other.
llvm-svn: 237281
Summary:
This was originally http://reviews.llvm.org/D8709 , but I didn't commit it correctly.
Since then GetSupportedArchitectureAtIndex() has been changed. That change, http://reviews.llvm.org/D9511 , breaks non-x86 linux implementations, so this change goes back to the old implementation and adds remote linux support from D8709.
D8709 summary:
The Linux Platform currently will only say the Host architecture is supported. This patch retains that behavior for the Host Platform, but adds a list of architectures for the Remote Platform.
Reviewers: clayborg, flackr
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9683
llvm-svn: 237278
Checks the host platform to determine logging channel to test in
TestRegisters.py as the logging runs host side.
Test Plan:
./dotest.py $DOTEST_OPTS -v -t -p TestRegisters.py
This passes mac -> linux as it's logging the correct channel.
Differential Revision: http://reviews.llvm.org/D9755
llvm-svn: 237271
all hosts.
We require a workaround to be able to locate global and anonymous namespace
functions in the dwarf symbols on linux binaries. This patch enables this code
on all platforms so that we can still find these symbols when debugging from a
different host platform.
Test Plan:
The following tests begin passing when running with a mac host to linux client:
TestCallCPPFunction.py
TestCallStopAndContinue.py
TestExprs.py
TestExprsChar.py
TestNamespace.py
TestOverloadedFunctions.py
TestRvalueReferences.py
TestThreadExit.py
Differential Revision: http://reviews.llvm.org/D9754
llvm-svn: 237270
Summary:
This patch fixes/cleans code around of (gdb) prompt:
# Add CMICmnStreamStdout::WritePrompt
# Clean up CMICmnStreamStdout::TextToStdout (don't lock
the m_mutex twice because it will be locked in CMICmnStreamStdout::WritePriv)
# Remove unused CMICmnStreamStdin::m_bShowPrompt field
# Refactor CMICmnLLDBDebuggerHandleEvents to use CMICmnStreamStdout::WritePrompt
instead of TextToStdout("(gdb)")
# Refactor CMIDriver to use CMICmnStreamStdout::WritePrompt instead of
```
if (bOk && m_rStdin.GetEnablePrompt())
bOk = m_rStdOut.WriteMIResponse(m_rStdin.GetPrompt());
```
Test Plan: ./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/
Reviewers: abidh
Reviewed By: abidh
Subscribers: lldb-commits, abidh
Differential Revision: http://reviews.llvm.org/D9737
llvm-svn: 237248
Summary:
This patch is the beginnings of support for Non-stop mode in the remote protocol. Letting a user examine stopped threads, while other threads execute freely.
Non-stop mode is enabled using the setting target.non-stop-mode, which sends a QNonStop packet when establishing the remote connection.
Changes are also made to treat the '?' stop reply packet differently in non-stop mode, according to spec https://sourceware.org/gdb/current/onlinedocs/gdb/Remote-Non_002dStop.html#Remote-Non_002dStop.
A setting for querying the remote for default thread on setup is also included.
Handling of '%' async notification packets will be added next.
Reviewers: clayborg
Subscribers: lldb-commits, ADodds, ted, deepak2427
Differential Revision: http://reviews.llvm.org/D9656
llvm-svn: 237239
Summary:
"import crashinfo" was probably failing because multiple dotest invocations
are all trying to compile crashinfo.so at the same time.
I've put a mutex around the compile step to prevent this.
Reviewers: clayborg, chying
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9732
llvm-svn: 237230
A dummy target is used by TargetList::CreateTargetInternal to prime newly
created targets. the first time this is done it creates the dummy target. The
dummy target is created with the host platform (See
TargetList::CreateDummyTarget) which results in switching the selected platform
back to the host platform even when creating a target for a different platform.
This change avoids changing the selected platform while creating the dummy
target to prevent this side effect.
Test Plan:
./dotest.py $DOTEST_OPTS -t -p TestCreateAfterAttach.py
Tests using process attach (e.g. TestCreateAfterAttach.py, TestHelloWorld.py)
now run successfully mac -> linux.
Differential Revision: http://reviews.llvm.org/D9712
llvm-svn: 237221
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
Ideally, this would be put in the individual test files.
Unfortunately, I'm not sure how to do that quickly/easily.
I'm open to suggestions.
In the meantime, I'll submit this to stabilze the build server.
llvm-svn: 237206
Summary:
GetCurrentDirectory() returns the number of characters copied; 0 is a failure, not a success.
Add implementation for chdir().
Reviewers: zturner
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9300
llvm-svn: 237162
Updated PlatformLinux::GetSupportedArchitectureAtIndex to call the
PlatformRemoteGdbServer::GetSupportedArchitectureAtIndex if connected remotely.
This should return the correct thing for android (to fix those failing tests),
and is also working for mac to linux.
Test Plan:
./dotest.py $DOTEST_OPTS -t -p TestCallStdStringFunction.py
The above still passes when running mac->linux indicating it successfully
identified PlatformLinux as the target platform and converted the mmap options
correctly.
Differential Revision: http://reviews.llvm.org/D9672
llvm-svn: 237128
This patch adds new default flag -fno-builtin which forces gcc to not optimize builtin functions.
For example, without this flag GCC replaces printf("hello\n") -> puts("hello") even if -O0 was specified
Also this patch fixes the MiDataTestCase.test_lldbmi_data_disassemble test on Linux/gcc.
llvm-svn: 237118
The defult implementation falls back to GetRegisterCount what
includes the debug registers also what shouldn't be displayed to
the user.
llvm-svn: 237111
Summary:
NPL::Resume attempted to handle eStateStopped as a resume action. However:
- GDBRemoteCommunicationServerLLGS (the only user of NPL) never sets this action
- it could set this action in response to a vCont:t packet, but LLDB never produces this packet
- gdb-remote protocol documentation says vCont:t packet is used only in non-stop mode, but LLDB
does not support non-stop mode
- even if LLDB supported non-stop mode, this implementation of eStateStopped does something
different from what the spec says it should (according to spec, it should stop the specified
thread, but this seems to want to stop all threads).
Given the facts above, I believe we should remove this unused and untested code, as it probably
doesn't even work and removing it makes the rest of the code noticably simpler.
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9657
llvm-svn: 237103
Summary:
Since the former-TSC events are now processed synchronously, there is no need for to protect them
with a separate mutex - all the actions are now guarded by the big m_threads_mutex.
With the mutex gone, the following functions, no longer have any purpose and were removed:
NotifyThreadCreate: replaced by direct calls to ThreadWasCreated
NotifyThreadStop: replaced by direct calls to ThreadDidStop
NotifyThreadDeath: folded into StopTrackingThread
ResetForExec: inlined as it consisted of a single line of code
RequestThreadResume(AsNeeded): replaced by direct calls to ResumeThread
StopThreads: removed, as it was never called
Test Plan: tests continue to pass
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9603
llvm-svn: 237101
Summary:
When -var-create fails, we will now show the error message from the failed evaluation if it is available.
Patch from chuckr@microsoft.com
Test Plan: I fixed the MiVarTestCase.test_lldbmi_eval test to expect the new error string. All MI tests passing on OS X.
Reviewers: abidh, ChuckR
Subscribers: greggm, lldb-commits, paulmaybee
Differential Revision: http://reviews.llvm.org/D9691
llvm-svn: 237094
Added missing SBLanguageRuntime.h to lldb.xcodeproj, set to Public (fixed compile error in TestPublicAPIHeaders)
Removed reference to (temporarily) missing gtest.xcodeproj
Fixed TestDeadStrip compile error
XFAIL TestPublicAPIHeaders - test passes but teardown command 'settings remove target.env-vars DYLD_LIBRARY_PATH' fails
XFAIL TestCModules - use of undeclared identifier 'MIN'
XFAIL TestModulesAutoImport - clang: error: unknown argument: '-gmodules'
XFAIL TestObjCNewSyntax - expr -- @((char*)"Hello world" + 6) cannot box a string value because NSString has not been declared
http://reviews.llvm.org/D9643
llvm-svn: 237085
This is a very minor change.
Just reshuffle the elements of the log filename so that the test name
comes before the arch/compiler
Before:
Failure-x86_64-clang-TestCModules.CModulesTestCase.test_expr_with_dwarf.log
After:
Failure-TestCModules.CModulesTestCase.test_expr_with_dwarf-x86_64-clang.log
This way, results are grouped by test name, not by arch. I think this
is much more useful.
Differential Revision: http://reviews.llvm.org/D9648
llvm-svn: 237076
Summary:
TargetList::CreateTargetInternal() will only select the current Platform. A previous patch always sets platform_sp to the current Platform, so a check later to see if platform_sp was not defined always failed, and the current Platform was used. This patch removes that check, so if the current Platform is not compatible with the target architecture, CreateTargetInternal() will call Platform::GetPlatformForArchitecture() to select a compatible Platform.
Vince, remote linux tests (Ubuntu -> remote Ubuntu) pass the same with and without this patch.
Reviewers: vharron, clayborg
Reviewed By: clayborg
Subscribers: jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D8749
llvm-svn: 237053
Summary: The Linux Platform shouldn't care about the Vendor field in the Triple. Currently it allows a value of "PC", or "unknown" if LLDB was built on Linux. This patch removes that check, so the Vendor field isn't touched. This will allow the Linux Platform to be created when using a Triple of *-*-Linux.
Reviewers: vharron, clayborg, sas, tberghammer
Reviewed By: clayborg, sas, tberghammer
Subscribers: tberghammer, sas, lldb-commits
Differential Revision: http://reviews.llvm.org/D8742
llvm-svn: 237052
Summary:
Hexagon is a VLIW processor. It can execute multiple instructions at once, called a packet. Breakpoints need to be alone in a packet. This patch will make sure that temporary breakpoints used for stepping are set at the start of a packet, which will put the breakpoint in a packet by itself.
Patch by Deepak Panickal of CodePlay and Ted Woodward of Qualcomm.
Reviewers: deepak2427, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9437
llvm-svn: 237047
Summary:
Since we don't yet have remote windows debugging, it should be safe to assume
that the remote target uses unix path separators.
Reviewers: ovyalov, zturner, clayborg, vharron
Reviewed By: vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9633
llvm-svn: 237006
When there is two brekapoint on two consecutive instruction then
the second breakpoint is ignored by lldb. This test check for the
correct behaviour in this scenario.
Differential revision: http://reviews.llvm.org/D9661
llvm-svn: 236997
For some reason this happens only when running the full test suite
(e.g., via ninja check-lldb), but not when running the
TestStaticVariables.py tests in isolation. XFAIL for now while
investigating, in an attempt to bring the bot to green and reduce noise.
llvm.org/pr20550
llvm-svn: 236993
Summary:
Now that all thread events are processed synchronously, there is no need to have separate records
of whether a thread is running. This changes the (ever-dwindling) remains of the TSC to use
NativeThreadLinux as the authoritative source of the state of threads. The rest of the
ThreadContext we need has been moved to a member of NTL.
Test Plan: ninja check-lldb continues to pass
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9562
llvm-svn: 236983
Test Plan: run tests with/without python debugger
Tested on OSX & Linux with PyCharm
Reviewers: chying, clayborg
Differential Revision: http://reviews.llvm.org/D9593
llvm-svn: 236957
Summary:
New dotest options that allow arbitrary log channels and
categories to be enabled. Also enables logging for locally run
debug servers.
Log messages are separated into separate files per test case.
(this makes it possible to log in dosep runs)
These new log files are stored side-by-side with trace files in the
session directory.
These files are deleted by default if the test run is successful.
If --log-success is specified, even successful logs are retained.
--log-success is useful for creating reference log files.
Test Plan:
add '--channel "lldb all" --channel "gdb-remote packets" --log-success'
to your dotest options
Tested on OSX and Linux
Differential Revision: http://reviews.llvm.org/D9594
llvm-svn: 236956
Converts the MAP_PRIVATE and MAP_ANON options to the target platform constants
(on which the call runs) rather than using those of the compiled host.
Test Plan:
Run test suite, the following tests requiring memory allocation / JIT support
begin passing when running mac -> linux:
Test11588.py
TestAnonymous.py
TestBreakpointConditions.py
TestCPPStaticMethods.py
TestCStrings.py
TestCallStdStringFunction.py
TestDataFormatterCpp.py
TestDataFormatterStdList.py
TestExprDoesntBlock.py
TestExprHelpExamples.py
TestFunctionTypes.py
TestPrintfAfterUp.py
TestSBValuePersist.py
TestSetValues.py
Differential Revision: http://reviews.llvm.org/D9511
llvm-svn: 236933
XFAILing these does not work because the timeout is caught by the
top-level test infrastucture instead.
Some might be llvm.org/pr22784
llvm-svn: 236924
Summary:
This seems to be sufficient to get the tests taking longer than the
previous timeout of 5m to run to completion on Android to pass instead
of timing out.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9627
llvm-svn: 236913
Thread-safe logging had been disabled because of a deadlock,
possibly due to a lock acquired during a signal handler.
This patch turns thread safe logging back on and also greatly
reduces the scope of the lock, confining it only to the code that
affects the underlying output stream, instead of all the code that
builds up the formatted log message. this should resolve the
issue surrounding the deadlock.
llvm-svn: 236892
For PIE executables the type of the main executable is shared object
so we can't force that the main executable should have the type of
executable.
llvm-svn: 236870
I'm not yet sure what's wrong with pexpect and I cannot reproduce this
problem locally. XFAIL these tests for now to reduce buildbot noise so
I can track down the remaining buildbot failures.
llvm.org/pr22784
llvm-svn: 236857
It's reported to pass consistently on Linux now, and it passed for me
in local testing on FreeBSD. Remove the expectedFailureFreeBSD decorator
for now.
llvm.org/pr20274
llvm-svn: 236853
If no temp directory specified by the user on android then fall back
to /data/local/tmp what is always present on the device. It removes
the dependency of specifying TMPDIR for executing platform commands
on android.
Differential revision: http://reviews.llvm.org/D9569
llvm-svn: 236843
This patch includes the following changes:
# Add CMIUtilString::ConvertToASCII to convert unicode to ASCII (MI)
# Rework CMICmnLLDBUtilSBValue::GetSimpleValue to print wide/unicode char (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueChar
## Extend CMICmnLLDBUtilSBValue::IsCharType to accept char16_t/char32_t
## Don't ignore the fail_value in SBValue::GetValueAsUnsigned
# Rework CMIUtilString::ConvertToASCII (MI)
## Don't use templates
## Change the function signature to convert signle characters (was std::basic_string)
## Rename CMIUtilString::ConvertToASCII to CMIUtilString::ConvertToPrintableASCII
# Add CMIUtilString::ConvertToPrintableASCII for char (MI)
## Refactor CMIUtilString::Escape
## Simplify CMICmnLLDBUtilSBValue::GetSimpleValueChar for char
# Add char16_t* and char32_t* support in CMICmnLLDBUtilSBValue::GetSimpleValue (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueCStringPointer
## Add CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2
(it's extended version of CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory)
# Improve error checking in CMICmnLLDBUtilSBValue::GetSimpleValueChar (MI)
# Refactor CMICmnLLDBUtilSBValue (MI)
## Remove CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
(use CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 instead)
## Rename CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 to
CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
## Move CMICmnLLDBUtilSBValue::GetValueCString to private methods
## Rename CMICmnLLDBUtilSBValue::GetValueCString to
CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray
## Remove CMICmnLLDBUtilSBValue::GetChildValueCString
# Improve MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string test to check char16_t/char32_t (MI)
# Fix CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray for Unicode (MI)
## Fix handling of char16_t and char32_t
## Improve CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory to read
variables of type char[]: add vnMaxLen argument
## Turn on few cases to check char16_t[] and char32_t[] output in
MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string
# Remove unnecessary checks in CMICmnLLDBUtilSBValue (MI)
llvm-svn: 236827
This patch incldues the following:
# Add from/to arguments in -var-list-children command (MI)
## Handle from and to args
## Don't print children=[] if numchild is 0
## A bit refactoring
## Add MiVarTestCase.test_lldbmi_var_list_children test
# Refactor -var-list-children (MI)
## Remove CMICmdCmdVarListChildren::VecMIValueResult_t
## Add CMICmdCmdVarListChildren::m_miValueList
## Remove CMICmdCmdVarListChildren::m_vecMiValueResult
(use CMICmdCmdVarListChildren::m_miValueList instead)
## Print error message if value is invalid:
```
^error,msg="variable invalid"
```
## Refactor CMICmdCmdVarListChildren::Acknowledge and remove duplicated code
## Don't print children=[] if numchild is 0
## Add error checking
## Use CMICmnLLDBDebugSessionInfo::VariableInfoFormat_e for print-values
## Add few more empty-range test cases in MiVarTestCase.test_lldbmi_var_list_children
#Improve MiVarTestCase.test_lldbmi_var_list_children test (MI)
llvm-svn: 236820
Summary:
This changes lldb_assert to accept bool expressions as the parameter, this is because some
objects (such as std::shared_ptr) are convertible to bool, but are not convertible to int, which
leads to surprising errors.
Reviewers: granata.enrico, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9565
llvm-svn: 236819
The ELF data contains two different errors in some ELF files on android.
* The link field of the symbol table don't point to the plt section or
to the dynsym section even when it is present in the ELF files.
* The size of the plt entries aren't specified in the section header of
the plt section.
This CL adds some workarounds for these two issue with finding the
sections by name if the link field is empty and by using a heuristic to
calculate the size and offset of the plt entries.
Differential revision: http://reviews.llvm.org/D9560
llvm-svn: 236818
Summary:
This set of changes addresses the issue I described in [[ http://llvm.org/pr23403 | Bug 23403 ]], in short most LLDB-MI tests fail unexpectedly due to timeout on my Ubuntu 14.10 x86_64 VirtualBox VM. I have no idea why the Ubuntu buildbots don't seem to suffer from this issue. This patch just makes **MiTestCaseBase.spawnLldbMi()** block until the spawned LLDB-MI child process outputs the **(gdb)** prompt, which ensures that MI commands aren't sent to the LLDB-MI child process until it's ready.
Before these changes 52 LLDB-MI tests failed unexpectedly (all but one due to timeouts), after these changes no tests fail due to timeouts. I still get one unexpected failure in **test_lldbmi_source_option_start_script_error** in **TestMiStartupOptions.py**, but that's due to a file error, that test should be skipped on Linux just like the other two //start_script// tests until the file error is fixed.
Patch from Vadim Macagon. Thanks!
Test Plan: ./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/
Reviewers: abidh, domipheus, ki.stfu
Reviewed By: ki.stfu
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D9595
llvm-svn: 236816
Summary:
The stop callback is a remnant of the ThreadStateCoordinator. We don't need it now that TSC is
gone, as we know exactly which function to call when threads stop. This also removes some
stop-related functions, which were just forwarding calls to one another.
Test Plan: ninja check-lldb continues to pass
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9531
llvm-svn: 236814
__attribute__(format(print...)) requires a function which takes
variadic arguments (... style), not a function which takes a va_list.
So following the same thing that VAPrintf does, just remove the
__attribute__ from this function.
llvm-svn: 236788
Summary:
Android has limits on file name lengths. This commit reduces the names of
the test executables to satisfy these limits.
Test Plan: dotest.py -p TestWatchpointMultipleThreads
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9540
llvm-svn: 236783
It was just detecting the existance of the value. If it gets the value correctly, we need to check that it is non-zero to see if cpu64bit_capable should be true.
<rdar://problem/20857426>
llvm-svn: 236759
After recent changes, TestConcurrentEvents began timing out. This increases the timeout limit to
7m for this test, ensure the Test has enough time to complete.
llvm-svn: 236725
Summary:
These are remnants of the thread state coordinator, which are now unnecessary. I have basically
inlined the callbacks. No functional change.
Test Plan: Tests continue to pass.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9343
llvm-svn: 236707
Summary:
This changes add -target-attach and -target-detach.
-target-attach allows lldb-mi to attach to an existing process by it's process id, matching gdb mi's syntax of '-target-attach <pid'. Additionally, support has been added for attaching to a process by name using '-target-attach -n <name>'. Combining this with --waitfor will allow lldb mi to attach to a process by name when the process starts.
-target-detach simply detaches from the current process
Patch from chuckr@microsoft.com
Test Plan: I have added three tests, one each for -target-attach <pid>, -target-attach -n <name>, and -target-attach -n <name> --waitfor
Reviewers: paulmaybee, abidh, ChuckR
Subscribers: greggm, lldb-commits
Differential Revision: http://reviews.llvm.org/D9484
llvm-svn: 236705
Summary: This patch moves synchronization of iohandler to CommandObjectProcessLaunch::DoExecute like it was done in CommandObjectProcessContinue::DoExecute.
Reviewers: jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, jingham
Differential Revision: http://reviews.llvm.org/D9373
llvm-svn: 236699
Summary:
- The address argument can now be an expression (e.g. &array), it's no longer restricted to being just a number literal.
- The -o (offset) option is now properly handled, not just silently ignored.
- The --thread option is now properly handled.
- A new --frame option has been added for consistency with GDB.
- Added a new test to verify old and new functionality.
Patch by Vadim Macagon. Thanks!
Test Plan: ./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/data
Reviewers: domipheus, abidh, ki.stfu
Reviewed By: abidh, ki.stfu
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D9470
llvm-svn: 236694
The ClangASTContext::getTargetInfo() will return NULL in this case and could cause us to crash if we don't check.
<rdar://problem/20543554>
llvm-svn: 236681
Summary:
GetEHFrameAugmentedUnwindPlan duplicated the work of GetEHFrameUnwindPlan in getting the original
plan from DWARF CFI. This changes the function to call GetEHFrameUnwindPlan instead of doing all
the work itself. A copy constructor is added to UnwindPlan to enable plan copying.
Test Plan: No regressions on linux test suite.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9369
llvm-svn: 236607
Summary:
The lambda was always calling SetState(eStateStopped) with small variations, so I have inlined
the code. Given that we don't have the TSC anymore, I believe we don't need to be so generic.
The only major change here is the way we choose a stop reason thread when we're interrupting a
program on client request. Previously, we were setting a null stop reason for all threads and
then fixing up the reason for one victim thread in the lambda. Now, I make sure the stop reason
is set for the victim thread correctly in the first place.
I also take the opportunity to rename CallAfter* functions into something more appropriate.
Test Plan: All tests continue to pass.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9321
llvm-svn: 236595
Summary:
Since all TSC operations are now executed synchronously, TSC has become a little more than a
messenger between different parts of NativeProcessLinux. Therefore, the reason for its existance
has disappeared.
This commit moves the contents of the TSC into the NPL class. This will enable us to remove all
the boilerplate code in NPL (as it stands now, this is most of the class), which I plan to do in
subsequent commits.
Unfortunately, this also means we will lose the unit tests for the TSC. However, since the size
of the TSC has diminished, the unit tests were not testing much at this point anyway, so it's not
a big loss.
No functional change.
Test Plan: All tests continue to pass.
Reviewers: vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9296
llvm-svn: 236587
Summary:
This is a cleanup patch for thread state coordinator. After making processing of all events
synchronous, there is no need to have a a separate class for each event. I have moved back
processing of all events back into the TSC class. No functional change.
Test Plan: All tests continue to pass.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9254
llvm-svn: 236576
/private/tmp/main.cpp
/private/tmp/..//tmp/main.cpp
We saw paths like this in makefile generate binaries when someone left an extra '/' on the end of a makefile variable.
<rdar://problem/18945972>
llvm-svn: 236541
Summary:
This change removes the thread state coordinator thread by making all the operations it was
performing synchronous. In order to prevent deadlock, NativeProcessLinux must now always call
m_monitor->DoOperation with the m_threads_mutex released. This is needed because HandleWait
callbacks lock the mutex (which means the monitor thread will block waiting on whoever holds the
lock). If the other thread now requests a monitor operation, it will wait for the monitor thread
do process it, creating a deadlock.
To preserve this invariant I have introduced two new Monitor commands: "begin operation block"
and "end operation block". They begin command blocks the monitor from processing waitpid
events until the corresponding end command, thereby assuring the monitor does not attempt to
acquire the mutex.
Test Plan: Run the test suite locally, verify no tests fail.
Reviewers: vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9227
llvm-svn: 236501
the test has passed in the last 300 runs, enabling to see what the build bot says. Also,
downgrading skipIfGcc to XFAIL, with plans of enabling it in the future if it shows to be
working.
llvm-svn: 236496
compact unwind encodings for x86_64 / i386 omit-frame-pointer
code. It was possible for lldb to get the location of saved
registers incorrect for some of these functions.
<rdar://problem/20753264>
llvm-svn: 236478
Summary:
After r236447, ValueObject::GetAddressOf returns LLDB_INVALID_ADDRESS
when the value type is eValueHostAddress. For such a case, clients of
GetAddressOf should get the address from the scalar part of the value
instead of using the value returned by GetAddressOf directly.
This change also makes ValueObject::GetAddressOf set the address type to
eAddressTypeHost for values of eValueHostAddress so that clients can
recognize that they need to fetch the address from the scalar part
of the value.
Test Plan: ninja check-lldb on linux
Reviewers: clayborg, ovyalov
Reviewed By: ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9490
llvm-svn: 236473
Summary:
This fixes TestRegisterVariables for clang and hence it is enabled in this commit.
Test Plan: dotest.py -C clang -p TestRegisterVariables
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9421
llvm-svn: 236447
Patch by Jaydeep Patil
EmulateInstructionMIPS64 has been modified to use llvm::MCDisassembler instead of duplicating the decoding logic.
Added emulation of few branch instructions for software single stepping
Reviewers: clayborg, jasonmolenda
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9319
llvm-svn: 236411
Some have been marked as skipIfLinux for years.
The seem to be passing so I've enabled them.
Differential Revision: http://reviews.llvm.org/D9428
llvm-svn: 236403
Refactored TestInitializerList to not be an inline test.
Refactored Makefiles to use USE_LIBCPP instead of adding FLAGS directly
Fixed copy/paste error in TestDataFormatterUnordered class name
Differenttial Revision: http://reviews.llvm.org/D9426
llvm-svn: 236401
These tests link against host lldb API. Compiler's target triple
must match liblldb triple. Instead of naively skipping i386, I added
a check of the liblldb arch against the compiler target arch.
This is useful for 32 bit API builds (planned for Windows)
Since remote is disabled, we can assume the os is the same.
Also, removed skipIfLinuxClang because it's passing
llvm-svn: 236396
Summary:
r235916 marked only one of the tests as xfail, but the other also has
been failing intermitantly on the buildbot.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9452
llvm-svn: 236366
follow-up to the change in r235158. Right now if you attach to
a process and type "kill", lldb doesn't kill it, it detaches.
<rdar://problem/20691198>
llvm-svn: 236363
(including inline functions) from modules in the
expression parser. We now have to retain a reference
to the code generator in ClangExpressionDeclMap so
that any imported function bodies can be appropriately
sent to that code generator.
<rdar://problem/19883002>
llvm-svn: 236297
an argument pointing into the middle of m_buffer and then
Write() calls GrowBuffer() to resize m_buffer, leaving
the content argument pointing into deallocated memory.
Patch by Kate Stone.
<rdar://problem/20756722>
llvm-svn: 236286
global convenience expression prefix. Also ensured
that if macros are defined by the modules we don't
try to redefine them. Finally cleaned up a bit of
code while I was in there.
<rdar://problem/20756642>
llvm-svn: 236266
Based on list discussions, a different approach is desired for
reducing the visual impact of logging statements on the
readability of the code. Another mechanism will be added in
a followup patch, but for now, since NullLog is unreferenced,
this patch just removes it.
This patch does *not* remove the other half of r236174, which was
to delete some dead code surrounding logging flags.
llvm-svn: 236259
The purpose of this class is so that GetLogIfAllCategoriesSet
can always return an instance of some class, whether it be a real
logging class or a "null" class, which ignores messages. Code
that is littered with if statements that only log if the pointer
is non-null can get very unwieldy very quickly, so this should
help code readability in such circumstances.
Since I'm in this code anyway, I'm also deleting the
PrintfWithFlags methods, as well as all the flags, since they
appear to be dead code that have been superceded by newer
mechanisms and all the flags are simply ignored.
llvm-svn: 236174
Summary:
NativeProcessProtocol uses ReadMemory internally for setting/checking
breakpoints but also for generic memory reads (Handle_m), this change adds a
ReadMemoryWithoutTrap for that purpose. Also fixes a bunch of misuses of addr_t
as size/length.
Test Plan: `disassemble` no longer shows the trap code.
Reviewers: jingham, vharron, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9330
llvm-svn: 236132
This code is also an import from MacOSx implementation as SysV abi is
similar to what has been implemented for MacOS but may require a few tweaks.
http://reviews.llvm.org/D8538
llvm-svn: 236098
Its mostly imported from MacOSx ABI for arm which is similar.
Further tweaking a updates may be required at a later stage.
http://reviews.llvm.org/D8539
llvm-svn: 236097
This command is able to list both local variables and stack arguments for a specific thread/frame.
Args are denoted with 'arg="1"'.
Patch from Chuck Ries.
llvm-svn: 236090
Summary:
The "internal" name of vars is different between clang and GCC. All this
change does is to use a regex instead of the hardcoded internal name.
Test Plan: dotest.py -C <clang|gcc> -p TestMiVar
Reviewers: ki.stfu
Reviewed By: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9128
llvm-svn: 236024
During testing -data-list-register-values, I saw a crash here due to buffer overflow.
This commit should fix the crash. There is still problem with printing 1-byte register
in some cases that I will fix separately.
No regression on MI test cases.
llvm-svn: 235991
Summary:
When using GDB with MI, if there aren't children for a variable,
it doesn't include a "children" value in the response. LLDB does
and sets it to "[]" while variables with children have an unquoted
list: children=[...].
This removes the children value entirely when there are no children
making this match GDB in behavior.
Test Plan: Ran tests on Mac OS X and they passed.
Reviewers: abidh, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9320
llvm-svn: 235974
Summary:
Without the synchronisation between the two thread creation events the following case could
happen:
- threads A and B are running. A hits a breakpoint. We note that we want to stop B.
- before we could stop it, B creates a new thread C, we get the stop notification for B, but we
don't record C's existence yet.
- we resume B
- before we get the C notification, B stops again (e.g. hits a breakpoint, gets our SIGSTOP,
etc.)
- we see all known threads have stopped, and we notify LLDB
- C notification comes, we note it's existence and resume it
=> we have an inconsistent state (LLDB thinks we've stopped, but C is running)
I resolve this by doing a blocking wait for for the C notification when we get the creation
notification on the parent (B) thread. This way the two events are synchronised, but we don't
need to introduce the intermediate "launching" state which would complicate handling of thread
states as all code would need to be aware of the third possible state.
Test Plan:
This is an obscure corner case, which I had not observed in practise, so I have no
test for it. I have tested that this commit does not regress in existing tests though.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9217
llvm-svn: 235969
Summary:
Currently, launching lldb-gdbserver from platform on Android requires root for
mkfifo() and an explicit TMPDIR variable. This should remove both requirements.
Test Plan: Successfully launched lldb-gdbserver on a non-rooted Android device.
Reviewers: tberghammer, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9307
llvm-svn: 235940
Currently hitting Ctrl-C in Windows LLDB-MI just exits MI. But according to test_lldbmi_stopped_when_interrupt() in TestMiSignal.py Ctrl-C should send a SIGINT signal to the inferior.
Patch adds this functionality to Windows so SIGINT is sent on Ctrl-C.
Patch from EwanCrawford. Reviewed in http://reviews.llvm.org/D9248.
llvm-svn: 235887
Summary:
Currently, linking of the unittests fails on linux because it is missing a bunch of symbols from
libedit, curses, etc. This fixes the build by adding the correct dependencies.
Test Plan: Linking works, unit tests run.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9244
llvm-svn: 235853
The previous read callback always read the value of the register what
caused problems when the emulator wrote some value into a register and
then expected to read the same value back. This CL add a register value
cache into the callbacks to return the correct value after a register
write also.
Test Plan: Stepping over BL/BLX instruction works on android-arm if the instruction set isn't change (other, unrelated patch will come for the case when we move to an other instruction set)
Reviewers: omjavaid, sas, clayborg
Reviewed By: clayborg
Subscribers: labath, tberghammer, rengolin, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D9187
From: Tamas Berghammer <tberghammer@google.com>
llvm-svn: 235852
This patch does the following things:
* Use CMICmnStreamStdout::TextToStdout to print (gdb) prompt in CMIDriver::InitClientIDEEclipse
* Remove unnecessary inclusions
llvm-svn: 235817
Don't call the lldb::SBProcess::GetRestartedFromEvent twice while
handling the CMICmnLLDBDebuggerHandleEvents::HandleProcessEventStateSuspended.
llvm-svn: 235812
Currently Symbols::LocateExecutableSymbolFile on MacOSX only looks for external
dsym debugging information, however if running on a stripped dwarf executable it
should also check for a .debug file as well.
Test Plan:
./dotest.py $DOTEST_OPTS -t -p TestSharedLibStrippedSymbols.py
This test now passes when running a remote Mac -> Linux test, and still passes
running locally on Mac or locally on Linux.
Differential Revision: http://reviews.llvm.org/D9174
llvm-svn: 235737
The condition detection code is calculating the result of the condition
based on the first 3 bit of the condition and then negate it if the LSB
of the condition is set. It works for the normal conditions but 0b1110
and 0b1111 are special as both of them should evaluate to true
independently the value of CPSR. This CL removes the negating logic from
those cases.
Differential revision: http://reviews.llvm.org/D9219
llvm-svn: 235715
In the previous ordering some "blx <label>" instruction was recognised
as "b #imm24" instructions causing a failure in the instruction
emulator.
Differential revision: http://reviews.llvm.org/D9218
llvm-svn: 235714
Summary:
Move scripts/Python/interface to scripts/interface so that we
can start making iterative improvements towards sharing the
interface files between multiple languages (each of which would
have their own directory as now).
Test Plan: Build and see.
Reviewers: zturner, emaste, clayborg
Reviewed By: clayborg
Subscribers: mjsabby, lldb-commits
Differential Revision: http://reviews.llvm.org/D9212
llvm-svn: 235676
Summary:
LLGS leaks pipes (when launched by lldb), sockets (when launched by platform),
and/or log file to the inferior. This should prevent all possible leaks.
Reviewers: vharron, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9211
llvm-svn: 235615
Summary:
Currently if two instances of lldb-mi are running with logging enabled using '--log' the log file conflicts. This produces the following error
MI: Error: File Handler. Error Permission denied opening 'C:\Users\Ewan\LLVM\build\Debug\bin\lldb-mi-log.txt'
Fixed in this patch by renaming lldb-mi-log.txt based on the date, e.g. lldb-mi-log.txt-20150316163631.log, and moving the file into the temp directory by using the --log-dir option.
Regrading previous review comments the P_tmpdir macro is defined in Windows but always points to "\", which doesn't help much. Also when using the Windows API for GetTempPath() dynamic memory seems much more messy.
Patch from ewan@codeplay.com
Reviewers: abidh, EwanCrawford
Subscribers: zturner, lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D9054
llvm-svn: 235589
Write the new cpsr value into the cpsr register if the BL or the BLX
instruction change the instruction set on arm.
Differential revision: http://reviews.llvm.org/D9188
llvm-svn: 235585
The test case lookinhg for the abort function in the stack trace.
Previously it lookd for a function which ends with "abort" but on some
system there are multiple such functions (e.g.: on android abort calls
__libc_android_abort) what made the test fail. This CL change the
behaviour to look for the abort function based on a fix list of names.
llvm-svn: 235584
The following situation occured if we were stopping a process (due to breakpoint, watchpoint, ...
hit) while a new thread was being created.
- process has two threads: A and B.
- thread A hits a breakpoint: we send a STOP signal to thread B and register a callback with
ThreadStateCoordinator to send a stop notification after the thread stops.
- thread B stops, but not due to the SIGSTOP, but on a thread creation event (of a new thread C).
We are unaware of our desire to stop, so we queue ThreadStopped and RequestResume operations
with TSC, so the thread can continue running.
- TSC receives the ThreadStopped event, sees that all threads are stopped and fires the delayed
stop notification.
- immediately after that TSC gets the RequestResume operation, so it resumes the thread.
At this point the state is inconsistent because LLDB thinks the process is stopped and will start
issuing commands to it, but one of the threads is in fact running. Things eventually break.
I address this problem by omitting the two TSC events altogether and Resuming the thread B
directly. This way the short stop is invisible to the TSC and the delayed notification will not
fire. We will fire the notification when we actually process the SIGSTOP on thread B.
When we get the initial SIGSTOP for thread C, we also resume the thread and send a
ThreadWasCreated message (is_stopped = false) to the TSC. This way, the TSC can stop the thread
on its own and handle the stop event later. This way the state of the new thread is correctly
handled as well (thanks Chaoren for the idea).
This patch also removes the synchronisation between the thread creation notifications on threads
B and C. The need for this synchronisation is unclear (the comments seem to hint that the new
thread is "fully created" only after we process both events, but I have noticed no regressions in
treating it as "created" even after just processing the initial C event), but it is a source for
many kinds of obscure races, since it introduces a new thread state "Launching" and the rest of
the code does not handle this state at all (what happens if we get a resume request from LLDB
while this thread is launching? what happens if we get a stop request? etc.).
This fixes the "spurious $O packet" problem in TestPrintStackTraces.py. However, the test remains
disabled on i386 due to the VDSO issue.
Test Plan:
TestPrintStackTraces works on x86_64. No regressions in the rest of the test suite.
Reviewers: vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9145
llvm-svn: 235579
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
Previously we would pass an argument to finishSwigWrapperClasses.py which
specified whether this was a debug or a release build. But sometimes
CMAKE_BUILD_TYPE would not be set to anything, causing this argument
to be empty when passed in. The only purpose of this argument was to
determine whether or not to append _d to the extension module when
creating the symlink. This is only necessary when doing a debug
build of LLDB on Windows, which implies a debug interpreter, so we
replace this with a check to see if the running interpreter is a debug
one, and append _d if so.
llvm-svn: 235559
breakpoints, for instance on the class of the thrown object.
This change doesn't actually make that work, the part where we
extract the thrown object type from the throw site isn't done yet.
This provides a general programmatic "precondition" that you can add
to breakpoints to give them the ability to do filtering on the LLDB
side before we pass the stop on to the user-provided conditions &
callbacks.
llvm-svn: 235538
Summary:
My understanding of the Windows API call GetLastError() is that it should only be checked when ::GetModuleFileName() returns 0 on error.
Otherwise GetExecutablesPath() could return an error despite nLen being valid if GetLastError() was inconsistent.
Patch updates function to only call GetOSLastError() when nLen == 0
Patch from ewan@codeplay.com
Reviewers: EwanCrawford
Subscribers: lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D9154
llvm-svn: 235515
apparently, TestConcurrentEvents is still not fixed. One test has failed on Linux i386 build.
Will disable the failing test on i386 for now, and see how it goes..
llvm-svn: 235504
After the latest changes in NativeProcessLinux, these tests should be stable now. Please revert
(and let me know) if any issue crops up.
llvm-svn: 235502
On linux-arm we use software single stepping where setting the new
breakpoint is only possible while the process is in stopped state.
This CL moves the setup code for single stepping form the SigneStep
operation into the Resum method to avoid an error when the process
already started when we want to step one of the thread.
Differential revision: http://reviews.llvm.org/D9108
llvm-svn: 235494
Summary: Just what it says on the box.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9150
llvm-svn: 235493
Summary:
- add decorator functions to xfail and skip test on specific os, architecture and version of comipler
- xfail failing test with gcc-4.9.2 on linux
- add one usage of skipIf function
Test Plan:
Run tests with different archs, and version of compilers to verify decorator function working as expected
Run tests with gcc-4.9.2 and no failure reported
Reviewers: sivachandra, ovyalov, vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8851
llvm-svn: 235368
-Makefile was deleted by r235313 causing test failure of TestTypedefArray.py, add it back
Summary: -Makefile was deleted by r235313 causing test failure of TestTypedefArray.py, add it back
Test Plan: Run lldb test locally with change, TestTypedefArray.py passed and no regression observed.
Reviewers: chaoren, sivachandra, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9119
llvm-svn: 235346
ConnectionFileDescriptor::BytesAvailable was reading multiple command
bytes from the command pipe but only processing the first. This
change only allows one byte to be read at a time, ensuring that all
get handled.
This isn't known to cause any bugs, but it might cause current/future
bugs.
Differential Revision: http://reviews.llvm.org/D9098
llvm-svn: 235322
CROSS_COMPILE environment variable is a common convention to specify the path
and/or prefix to cross compilation tools (e.g. ar, objcopy).
Test Plan:
dotest.py $DOTEST_OPTS -t -p 'TestBSDArchives.py|TestBreakpointCommandsFromPython.py|TestFormats.py|TestObjCDynamicValue.py'
All of these tests now compile successfully and pass running macosx -> linux
using a cross compilation toolchain prefixed by CROSS_COMPILE without requiring
changing your PATH. They still pass when run locally on macosx.
Differential Revision: http://reviews.llvm.org/D9072
llvm-svn: 235320
module-loading support for the expression parser.
- It adds support for auto-loading modules referred
to by a compile unit. These references are
currently in the form of empty translation units.
This functionality is gated by the setting
target.auto-import-clang-modules (boolean) = false
- It improves and corrects support for loading
macros from modules, currently by textually
pasting all #defines into the user's expression.
The improvements center around including only those
modules that are relevant to the current context -
hand-loaded modules and the modules that are imported
from the current compile unit.
- It adds an "opt-in" mechanism for all of this
functionality. Modules have to be explicitly
imported (via @import) or auto-loaded (by enabling
the above setting) to enable any of this
functionality.
It also adds support to the compile unit and symbol
file code to deal with empty translation units that
indicate module imports, and plumbs this through to
the CompileUnit interface.
Finally, it makes the following changes to the test
suite:
- It adds a testcase that verifies that modules are
automatically loaded when the appropriate setting
is enabled (lang/objc/modules-auto-import); and
- It modifies lanb/objc/modules-incomplete to test
the case where a module #undefs something that is
#defined in another module.
<rdar://problem/20299554>
llvm-svn: 235313
Summary:
This commit moves the functionality of the operation thread into the new monitor thread. This is
required to avoid a kernel race between the two threads and I believe it actually makes the code
cleaner.
Test Plan: Ran the test suite a couple of times, no regressions.
Reviewers: ovyalov, tberghammer, vharron
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9080
llvm-svn: 235304
The arm instruction emulation handles only some of the opcode (including
all of them modifying the PC). For the rest of the instructions we can
advance the PC by the size of the instruction as they don't modify the
PC on any other way.
Differential revision: http://reviews.llvm.org/D9076
llvm-svn: 235292
Previously the read thread was only stopped if CloseOnEOF was set on the
communication channel. It caused it to spin in case of an EOF because
::select() always reported that we can read from the file descriptor.
This CL change this behavior with stopping the read thread on EOF but do
a disconnect only if CloseOnEOF is enabled.
Differential revision: http://reviews.llvm.org/D9077
llvm-svn: 235291
Summary: Caused a failure because it showed up as `__printf`.
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9060
llvm-svn: 235214
Vince Harron