Commit Graph

27 Commits

Author SHA1 Message Date
Francis Visoiu Mistrih 25528d6de7 [CodeGen] Unify MBB reference format in both MIR and debug output
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.

The MIR printer prints the IR name of a MBB only for block definitions.

* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix

Differential Revision: https://reviews.llvm.org/D40422

llvm-svn: 319665
2017-12-04 17:18:51 +00:00
Nirav Dave 54e22f33d9 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting with compiler time improvements

    Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 297695
2017-03-14 00:34:14 +00:00
Chandler Carruth ce52b80744 [SDAG] Revert r296476 (and r296486, r296668, r296690).
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.

llvm-svn: 296862
2017-03-03 10:02:25 +00:00
Nirav Dave f830dec3f2 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 296476
2017-02-28 14:24:15 +00:00
Nirav Dave 73cd0194cf Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r296252 until 256-bit operations are more efficiently generated in X86.

llvm-svn: 296279
2017-02-26 01:27:32 +00:00
Nirav Dave beabf456df In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 296252
2017-02-25 11:43:58 +00:00
Nirav Dave 93f9d5ce04 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r293893 which is miscompiling lua on ARM and
bootstrapping for x86-windows.

llvm-svn: 293915
2017-02-02 18:24:55 +00:00
Nirav Dave 4442667fc5 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting after fixing X86 inc/dec chain bug.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 293893
2017-02-02 14:39:42 +00:00
Nirav Dave d32a421f75 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r293184 which is failing in LTO builds

llvm-svn: 293188
2017-01-26 16:46:13 +00:00
Nirav Dave de6516c466 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
* Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 293184
2017-01-26 16:02:24 +00:00
Nirav Dave f5bf03c7ef Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
Reverting due to ARM MCJIT and MIPS LLD error.

This reverts commit r289659.

llvm-svn: 289667
2016-12-14 16:43:44 +00:00
Nirav Dave 8527ab0ad2 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning

Simplify Consecutive Merge Store Candidate Search

Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.

Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).

Additional Minor Changes:

   1. Finishes removing unused AliasLoad code
   2. Unifies the the chain aggregation in the merged stores across
      code paths
   3. Re-add the Store node to the worklist after calling
      SimplifyDemandedBits.
   4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
      arbitrary, but seemed sufficient to not cause regressions in
      tests.

This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.

Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations

Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -

      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and
      merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 289659
2016-12-14 15:44:26 +00:00
Nirav Dave bedb5d906c Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r289221 which appears to be triggering an assertion

llvm-svn: 289226
2016-12-09 17:18:24 +00:00
Nirav Dave fd51ff4fd8 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Retrying after fixing overly aggressive load-store forwarding optimization.

Simplify Consecutive Merge Store Candidate Search

Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.

Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).

Additional Minor Changes:

   1. Finishes removing unused AliasLoad code
   2. Unifies the the chain aggregation in the merged stores across
      code paths
   3. Re-add the Store node to the worklist after calling
      SimplifyDemandedBits.
   4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
      arbitrary, but seemed sufficient to not cause regressions in
      tests.

This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.

Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations

Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -

      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and
      merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 289221
2016-12-09 16:15:12 +00:00
Nirav Dave a81682aad4 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r284151 which appears to be triggering a LTO
failures on Hexagon

llvm-svn: 284157
2016-10-13 20:23:25 +00:00
Nirav Dave 4b36957243 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Retrying after upstream changes.

   Simplify Consecutive Merge Store Candidate Search

   Now that address aliasing is much less conservative, push through
   simplified store merging search which only checks for parallel stores
   through the chain subgraph. This is cleaner as the separation of
   non-interfering loads/stores from the store-merging logic.

   Whem merging stores, search up the chain through a single load, and
   finds all possible stores by looking down from through a load and a
   TokenFactor to all stores visited. This improves the quality of the
   output SelectionDAG and generally the output CodeGen (with some
   exceptions).

   Additional Minor Changes:

       1. Finishes removing unused AliasLoad code
       2. Unifies the the chain aggregation in the merged stores across
       code paths
       3. Re-add the Store node to the worklist after calling
       SimplifyDemandedBits.
       4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
       arbitrary, but seemed sufficient to not cause regressions in
       tests.

   This finishes the change Matt Arsenault started in r246307 and
   jyknight's original patch.

   Many tests required some changes as memory operations are now
   reorderable. Some tests relying on the order were changed to use
   volatile memory operations

   Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -

      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and
      merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

    CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
      This test appears to work but no longer exhibits the spill behavior.

Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 284151
2016-10-13 19:20:16 +00:00
Nirav Dave e524f50882 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r282600 due to test failues with MCJIT

llvm-svn: 282604
2016-09-28 16:37:50 +00:00
Nirav Dave e17e055b75 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Simplify Consecutive Merge Store Candidate Search

  Now that address aliasing is much less conservative, push through
  simplified store merging search which only checks for parallel stores
  through the chain subgraph. This is cleaner as the separation of
  non-interfering loads/stores from the store-merging logic.

  Whem merging stores, search up the chain through a single load, and
  finds all possible stores by looking down from through a load and a
  TokenFactor to all stores visited. This improves the quality of the
  output SelectionDAG and generally the output CodeGen (with some
  exceptions).

  Additional Minor Changes:

    1. Finishes removing unused AliasLoad code
    2. Unifies the the chain aggregation in the merged stores across
       code paths
    3. Re-add the Store node to the worklist after calling
       SimplifyDemandedBits.
    4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
       arbitrary, but seemed sufficient to not cause regressions in
       tests.

  This finishes the change Matt Arsenault started in r246307 and
  jyknight's original patch.

  Many tests required some changes as memory operations are now
  reorderable. Some tests relying on the order were changed to use
  volatile memory operations

  Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -
      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

    CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
      This test appears to work but no longer exhibits the spill
      behavior.

Reviewers: arsenm, hfinkel, tstellarAMD, nhaehnle, jyknight

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 282600
2016-09-28 15:50:43 +00:00
Simon Pilgrim a1142579f1 Regenerate test
llvm-svn: 279385
2016-08-20 21:35:45 +00:00
David Blaikie a79ac14fa6 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794
2015-02-27 21:17:42 +00:00
David Blaikie 79e6c74981 [opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
  handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
  in-memory representation will be in separate changes.

* geps of vectors are transformed as:
    getelementptr <4 x float*> %x, ...
  ->getelementptr float, <4 x float*> %x, ...
  Then, once the opaque pointer type is introduced, this will ultimately look
  like:
    getelementptr float, <4 x ptr> %x
  with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
    getelementptr float addrspace(1)* %x
  ->getelementptr float, float addrspace(1)* %x
  Then, eventually:
    getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile(       r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
  if not match:
    return line
  line = match.groups()[0]
  if len(match.groups()[5]) == 0:
    line += match.groups()[2]
  line += match.groups()[3]
  line += ", "
  line += match.groups()[1]
  line += "\n"
  return line

for line in sys.stdin:
  if line.find("getelementptr ") == line.find("getelementptr inbounds"):
    if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
      line = conv(re.match(ibrep, line), line)
  elif line.find("getelementptr ") != line.find("getelementptr ("):
    line = conv(re.match(normrep, line), line)
  sys.stdout.write(line)

apply.sh:
for name in "$@"
do
  python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
  rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786
2015-02-27 19:29:02 +00:00
Sanjay Patel 7129c10cae merge consecutive loads that are offset from a base address
SelectionDAG::isConsecutiveLoad() was not detecting consecutive loads
when the first load was offset from a base address. 

This patch recognizes that pattern and subtracts the offset before comparing
the second load to see if it is consecutive.

The codegen change in the new test case improves from:

vmovsd	32(%rdi), %xmm0
vmovsd	48(%rdi), %xmm1 
vmovhpd	56(%rdi), %xmm1, %xmm1
vmovhpd	40(%rdi), %xmm0, %xmm0
vinsertf128	$1, %xmm1, %ymm0, %ymm0

To:

vmovups	32(%rdi), %ymm0

An existing test case is also improved from:

vmovsd	(%rdi), %xmm0
vmovsd	16(%rdi), %xmm1
vmovsd	24(%rdi), %xmm2
vunpcklpd	%xmm2, %xmm0, %xmm0 ## xmm0 = xmm0[0],xmm2[0]
vmovhpd	8(%rdi), %xmm1, %xmm3

To:

vmovsd	(%rdi), %xmm0
vmovsd	16(%rdi), %xmm1
vmovhpd	24(%rdi), %xmm0, %xmm0
vmovhpd	8(%rdi), %xmm1, %xmm1

This patch fixes PR21771 ( http://llvm.org/bugs/show_bug.cgi?id=21771 ).

Differential Revision: http://reviews.llvm.org/D6642

llvm-svn: 224379
2014-12-16 21:57:18 +00:00
Andrew Trick e97d8d6dde Enable MI Sched for x86.
This changes the SelectionDAG scheduling preference to source
order. Soon, the SelectionDAG scheduler can be bypassed saving
a nice chunk of compile time.

Performance differences that result from this change are often a
consequence of register coalescing. The register coalescer is far from
perfect. Bugs can be filed for deficiencies.

On x86 SandyBridge/Haswell, the source order schedule is often
preserved, particularly for small blocks.

Register pressure is generally improved over the SD scheduler's ILP
mode. However, we are still able to handle large blocks that require
latency hiding, unlike the SD scheduler's BURR mode. MI scheduler also
attempts to discover the critical path in single-block loops and
adjust heuristics accordingly.

The MI scheduler relies on the new machine model. This is currently
unimplemented for AVX, so we may not be generating the best code yet.

Unit tests are updated so they don't depend on SD scheduling heuristics.

llvm-svn: 192750
2013-10-15 23:33:07 +00:00
Stephen Lin 6f36b45076 Update to more CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change.
All changes were made by the following bash script:

  find test/CodeGen -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    grep -q "^; *RUN: *llc.*debug" $NAME && continue
    grep -q "^; *RUN:.*llvm-objdump" $NAME && continue
    grep -q "^; *RUN: *opt.*" $NAME && continue
    TEMP=`mktemp -t temp`
    cp $NAME $TEMP
    sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
    while read FUNC; do
      sed -i '' "s/;\([A-Za-z0-9_-]*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC[:]* *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
    done
    sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
    sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
    sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
    sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
    mv $TEMP $NAME
  done

This script catches a superset of the cases caught by the script associated with commit r186280. It initially found some false positives due to unusual constructs in a minority of tests; all such cases were disambiguated first in commit r186621.

llvm-svn: 186624
2013-07-18 22:47:09 +00:00
Andrew Trick 121124acf8 Revert "Temporarily enable MI-Sched on X86."
This reverts commit 98a9b72e8c56dc13a2617de84503a3d78352789c.

llvm-svn: 184823
2013-06-25 02:48:58 +00:00
Andrew Trick 5a1e0af838 Temporarily enable MI-Sched on X86.
Sorry for the unit test churn. I'll try to make the change permanently
next time.

llvm-svn: 184705
2013-06-24 09:13:20 +00:00
Nadav Rotem 7b66c47051 X86: Fix a bug in EltsFromConsecutiveLoads. We can't generate new loads without chains.
llvm-svn: 182507
2013-05-22 19:28:41 +00:00