Handle position independent code for MIPS32.
When callee is global address, lower call will emit callee
as G_GLOBAL_VALUE and add target flag if needed.
Support $gp in getRegBankFromRegClass().
Select G_GLOBAL_VALUE, specially handle case when
there are target flags attached by lowerCall.
Differential Revision: https://reviews.llvm.org/D62589
llvm-svn: 362210
Lower call for callee that is register for MIPS32.
Register should contain callee function address.
Differential Revision: https://reviews.llvm.org/D62585
llvm-svn: 362204
These patterns can incorrectly narrow a volatile load from 128-bits to 64-bits.
Similar to PR42079.
Switch to using (v4i32 (bitcast (v2i64 (scalar_to_vector (loadi64))))) as the
load pattern used in the instructions.
This probably still has issues in 32-bit mode where loadi64 isn't legal. Maybe
we should use VZMOVL for widened loads even when we don't need the upper bits
as zeroes?
llvm-svn: 362203
DAG combine will usually fold fpextend+load to an fp extload anyway. So the
256 and 512 patterns were probably unnecessary. The 128 bit pattern was special
in that it looked for a v4f32 load, but then used it in an instruction that
only loads 64-bits. This is bad if the load happens to be volatile. We could
probably make the patterns volatile aware, but that's more work for something
that's probably rare. The peephole pass might kick in and save us anyway. We
might also be able to fix this with some additional DAG combines.
This also adds patterns for vselect+extload to enabled masked vcvtps2pd to be
used. Previously we looked for the unlikely vselect+fpextend+load.
llvm-svn: 362199
This consolidates the vreg skip code into one function (SkipVRegs()).
SkipVRegs() now knows if it should skip as if it is the first initialization or
subsequent skips.
The first skip is also done the first time createVirtualRegister is called by
the cursor instead of by the cursor's constructor. This prevents verifier
errors on machine functions that have no vregs (where the verifier will
complain that there are vregs when the function uses none).
Differential Revision: https://reviews.llvm.org/D62717
llvm-svn: 362195
This makes the 5 address operands come first. And the data operand comes last.
This matches the operand order the instruction is created with. It's also the
expected order in X86MCInstLower. So everything appeared to work, but the
operands didn't match their declared type.
Fixes a -verify-machineinstrs failure.
Also remove the isel patterns from these instructions since they should only
be used for stack spills and reloads. I'm not even sure what types the patterns
were looking for to match.
llvm-svn: 362193
This is am almost NFC, it does the following:
- If there is no register class for a COPY's src or dst, bail.
- Fixes uses iterator invalidation bug.
Differential Revision: https://reviews.llvm.org/D62713
llvm-svn: 362191
Summary:
Only vector tests are being affected here,
since subtraction by scalar constant is rewritten
as addition by negated constant.
No surprising test changes.
https://rise4fun.com/Alive/pbT
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62257
llvm-svn: 362146
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 362145
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 362144
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 362143
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 362142
Summary:
Direct sibling of D62662, the root cause of the endless combine loop in D62257
https://rise4fun.com/Alive/d3W
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62664
llvm-svn: 362133
Summary:
This was the root cause of the endless combine loop in D62257
https://rise4fun.com/Alive/d3W
Reviewers: RKSimon, spatel, craig.topper, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62662
llvm-svn: 362131
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
With LLPC, previous investigation has suggested that si-scheduler
interacts badly with SiFormMemoryClauses on an XNACK target in some
games.
That needs further investigation in the future. In the meantime, this
commit adds a target-specific attribute to allow us to disable
SIFormMemoryClauses by setting it to 1 on a per-function basis for LLPC
to use.
Differential Revision: https://reviews.llvm.org/D62572
Change-Id: Ia0ca12ce79093cbbe86caded723ffb13384ede92
llvm-svn: 362127
There were crashes (addrspace-memoperands.mir was only one of them) in MIR that
had operands that came from before register classes were set. With these
operands, creating a replacement vreg (for MIR-Canon's renaming) needs to use
the vreg type rather than the RegisterClass which is not present.
Differential Revision: https://reviews.llvm.org/D62543
llvm-svn: 362122
This change creates UnrollVectorOp_StrictFP. The purpose of this is to address a failure that consistently occurs when calling StrictFP functions on vectors whose number of elements is 3 + 2n on most platforms, such as PowerPC or SystemZ. The old UnrollVectorOp method does not expect that the vector that it will unroll will have a chain, so it has an assert that prevents it from running if this is the case. This new StrictFP version of the method deals with the chain while unrolling the vector. With this new function in place during vector widending, llc can run vector-constrained-fp-intrinsics.ll for SystemZ successfully.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Cameron McInally, Kevin P. Neal
Approved by: Cameron McInally
Differential Revision: http://reviews.llvm.org/D62546
llvm-svn: 362112
This adds hopefully-full test coverage for all the possible permutations:
First op is one of:
* x + c1
* x - c1
* c1 - x
Second op is one of:
* + c2
* - c2
* c2 -
And thus 3*3=9 patterns.
Some of them show missed constant-folds.
Without previous patch (the revert), these tests were causing endless
dagcombine loop. I really should have thought about this first :S
llvm-svn: 362110
I was looking into an endless combine loop the uncommitted follow-up patch
was causing, and it appears even these patches can exibit such an
endless loop. The root cause is that we try to hoist one binop (add/sub) with
constant operand, and if we get two such binops both of which are
eligible for this hoisting, we get stuck.
Some cases may highlight missing constant-folds.
Reverts r361871,r361872,r361873,r361874.
llvm-svn: 362109
This adds:
- LLVM subtarget features to make all the new instructions conditional on,
- CPU and FPU names for use on clang's command line, with default FPUs set
so that "armv8.1-m.main+fp" and "armv8.1-m.main+fp.dp" will select the right
FPU features,
- architecture extension names "mve" and "mve.fp",
- ABI build attribute support for v8.1-M (a new value for Tag_CPU_arch) and MVE
(a new actual tag).
Patch mostly by Simon Tatham.
Differential Revision: https://reviews.llvm.org/D60698
llvm-svn: 362090
We already have good codegen for (vXiY *ext(vXi1 bitcast(iX))) cases, this patch uses it for loads of vXi1 types as well - changing the load into a iX integer load, and bitcasting so that combineToExtendBoolVectorInReg can then use it.
Differential Revision: https://reviews.llvm.org/D62449
llvm-svn: 362081
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362012
Previously the pass ran the entire llc pipeline which caused the IR to be recodegened.
This commit restricts it to just running the postrapseudos pass and checking the results of that instead of the final assembly.
llvm-svn: 361991
The powerpc64-"nonle" tests are removed. They fail because of a bug that
Drew is currently working on that affects multiple targets.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Hal Finkel, Kevin P. Neal
Approved by: Hal Finkel
Differential Revision: http://reviews.llvm.org/D62388
llvm-svn: 361985
To determine the list of clobbered registers, the RegUsageInfoCollector pass
uses the list of callee saved registers provided by the target and then augments
it with the list of registers which have all their subregisters saved. It then
basically does the difference between all the registers and the saved registers
to come up with what is clobbered (plus it checks that the register is defined
within that functions).
The patch fixes a bug where when register does not have any subregister lane,
hence when checking if any of its subregister are not saved, we would find none
and think the register is saved as well.
That's obviously wrong.
The code was actually kind of checking for something like that with the
CoveredBySubRegs bit. What this bit says is that a register is completely
covered by its subregisters.
We required that this bit was set, to check that a register was saved by its
subregister lanes, since without this bit, we potentially would miss to check
some part of the register.
However, this bit is used de facto on registers that don't have any
subregisters (e.g., on ARM) and the code was not prepared for that.
This patch fixes this by checking that a register has subregisters before
declaring it saved when none of its lanes are modified.
llvm-svn: 361901
Add support for selecting FCMPSri and FCMPDri when comparing against 0.0, and
factor out opcode selection for G_FCMP into its own function.
Add a test to show that we don't do this with other immediates.
Differential Revision: https://reviews.llvm.org/D62539
llvm-svn: 361888
Summary:
This adds support for translation of LLVM IR fence instruction. We
convert a singlethread fence to a pseudo compiler barrier which becomes
0 instructions in final binary, and a thread fence to an idempotent
atomicrmw instruction to a memory address.
Reviewers: dschuff, jfb, sunfish, tlively
Subscribers: sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D50277
llvm-svn: 361884
This patch optimizes ISD::LRINT and ISD::LLRINT to frintx plus
fcvtzs. It currently only handles the scalar version.
Reviewed By: SjoerdMeijer, mstorsjo
Differential Revision: https://reviews.llvm.org/D62018
llvm-svn: 361877
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
This is a recommit, originally committed in rL361856, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 361874
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
This is a recommit, originally committed in rL361855, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 361873
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361853, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 361872
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs.
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 361871
Summary:
- There's a regression due to the cross-block RC assignment. Use the
proper way to derive the output register RC in inline asm.
Reviewers: rampitec, alex-t
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, dstuttard, tpr, t-tye, eraman, hiraditya, llvm-commits, yaxunl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62537
llvm-svn: 361868
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 361856
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 361855
Summary:
Only vector tests are being affected here,
since subtraction by scalar constant is rewritten
as addition by negated constant.
No surprising test changes.
https://rise4fun.com/Alive/pbT
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62257
llvm-svn: 361854
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 361853
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 361852
If the only VGPRs used for SGPR spilling were not CSRs, this was
enabling all laness and immediately restoring exec. This is the usual
situation in leaf functions.
llvm-svn: 361848
Summary:
- Don't treat the use of a scalar register as `vreg_1` an VGPR usage.
Otherwise, that promotes that scalar register into vector one, which
breaks the assumption that scalar register holds the lane mask.
- The issue is triggered in a complicated case, where if the uses of
that (lane mask) scalar register is legalized firstly before its
definition, e.g., due to the mismatch block placement and its
topological order or loop. In that cases, the legalization of PHI
introduces the use of that scalar register as `vreg_1`.
Reviewers: rampitec, nhaehnle, arsenm, alex-t
Subscribers: kzhuravl, jvesely, wdng, dstuttard, tpr, t-tye, hiraditya, llvm-commits, yaxunl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62492
llvm-svn: 361847
Those two subtarget features were awkward because their semantics are
reversed: each one indicates the _lack_ of support for something in
the architecture, rather than the presence. As a consequence, you
don't get the behavior you want if you combine two sets of feature
bits.
Each SubtargetFeature for an FP architecture version now comes in four
versions, one for each combination of those options. So you can still
say (for example) '+vfp2' in a feature string and it will mean what
it's always meant, but there's a new string '+vfp2d16sp' meaning the
version without those extra options.
A lot of this change is just mechanically replacing positive checks
for the old features with negative checks for the new ones. But one
more interesting change is that I've rearranged getFPUFeatures() so
that the main FPU feature is appended to the output list *before*
rather than after the features derived from the Restriction field, so
that -fp64 and -d32 can override defaults added by the main feature.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: srhines, javed.absar, eraman, kristof.beyls, hiraditya, zzheng, Petar.Avramovic, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60691
llvm-svn: 361845
If we don't have VLX then 256-bit SET0 should be lowered
to VPXOR with ZMM registers. This restores functionality
accidentally removed by r309926.
Differential Revision: https://reviews.llvm.org/D62415
llvm-svn: 361843
This shows up as a side issue to the main problem for the AVX target example from PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428 - https://godbolt.org/z/7tpRa3
But as we can see in the pile of existing test diffs, it's actually a widespread problem
that affects any AVX or later target. Apart from a couple of oddballs, I think these are
all improvements for the reasons stated in the code comment: we do not want to enable YMM
unnecessarily (avoid vzeroupper and frequency throttling) and some cores split 256-bit
stores anyway.
We could say that MergeConsecutiveStores() is going overboard on some of these examples,
but that won't solve the problem completely. But that is the reason I'm proposing this as
a lowering rather than a combine: we will infinite loop fighting the merge code if we try
this earlier.
Differential Revision: https://reviews.llvm.org/D62498
llvm-svn: 361822
Forking this out of the discussion in D62498
(and assuming that will be committed later, so adding the helper function here).
The LangRef says:
"the backend should never split or merge target-legal volatile load/store instructions."
Differential Revision: https://reviews.llvm.org/D62506
llvm-svn: 361815
This was reverted in r360086 as it was supected of causing mysterious test
failures internally. However, it was never concluded that this patch was the
root cause.
> The code was previously checking that candidates for sinking had exactly
> one use or were a store instruction (which can't have uses). This meant
> we could sink call instructions only if they had a use.
>
> That limitation seemed a bit arbitrary, so this patch changes it to
> "instruction has zero or one use" which seems more natural and removes
> the need to special-case stores.
>
> Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 361811
Setting mayLiveOut based only on use instructions after allocating the
def block did not work if the use block was allocated before the def
block, since the virtual register uses were already removed.
Fixes bug 41973.
llvm-svn: 361781
Summary:
- The current implementation simplifies the case where the source of
`copyto` is `implicit-def`ed. However, it only works when that
`implicit-def` is single-used since it detects that from
`implicit-def` and cannot determine which destination vreg should be
used if there are multiple uses.
- This patch changes that detection when `copyto` is being emitted. If
that `copyto`'s source is defined from `implicit-def`, it simplifies
it. Hence, it works even that `implicit-def` is multi-used.
- Except it simplifies the internal IR, it won't improve the quality of
code generation. However, it helps to detect 'implicit-def` in a
straight-forward manner in some passes, such as `si-i1-copies`. A test
case is added.
Reviewers: sunfish, nhaehnle
Subscribers: jvesely, hiraditya, asbirlea, llvm-commits, yaxunl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62342
llvm-svn: 361777
This is problematic on buildbots, as discussed here: https://reviews.llvm.org/rL361356
It seems like the plan already was to revert, but that hasn't happened yet.
llvm-svn: 361746
The variables in BTF DataSec type encode in-section offset.
R_BPF_NONE should be generated instead of R_BPF_64_32.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D62460
llvm-svn: 361742
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
This commit was reverted because of the build failure.
The reason was mlformed patch.
Build failure fixed.
llvm-svn: 361741
This add patterns for fp16 round and ceil etc. Same as the float and double
patterns.
Differential Revision: https://reviews.llvm.org/D62326
llvm-svn: 361718
Promote a number of fp16 math intrinsics to float, so that the relevant float
math routines can be used. Copysign is expanded so as to be handled in-place.
Differential Revision: https://reviews.llvm.org/D62325
llvm-svn: 361717
We were only testing for direct SETCC results - this allows us to peek through AND/OR/XOR combinations of the comparison results as well.
There's a missing SEXT(PACKSS) fold that I need to investigate for v8i1 cases before I can enable it there as well.
llvm-svn: 361716
If we have a known non-nan operand, place it in the second operand
of fmin/fmax that is returned if either operand is nan.
Differential Revision: https://reviews.llvm.org/D62448
llvm-svn: 361704
The test diffs show improved vector narrowing for integer min/max opcodes because
those were all absent from the list. I'm not sure if we can expose functional diffs
for all of the moved/added opcodes though.
It seems like we are missing an AVX512 opportunity to use 256-bit ops in place of
512-bit ops on some tests/targets, but I think that can be a follow-up.
Preliminary steps to make sure the callers are not misusing these queries:
rL361268
rL361547
Differential Revision: https://reviews.llvm.org/D62191
llvm-svn: 361701
The test based on PR42010:
https://bugs.llvm.org/show_bug.cgi?id=42010
...may show an inaccuracy for PPC's target defs, but we should not
be so aggressive with an assert here. There's no telling what out-of-tree
targets look like.
llvm-svn: 361696
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
In a few places in getInstrMapping, we check if use/def instructions for the
instruction we're mapping have floating point constraints.
We can improve this check and reduce the number of copies in GISel-compiled code
if we make a couple observations:
- For a def instruction, it only matters if the def instruction must always
output a value stored on a FPR
- For a use instruction, it only matters if the use instruction must always
only take in values stored in FPRs
This adds two new functions:
- onlyUsesFP
- onlyDefinesFP
Then we can use those when we're checking the uses/defs instead.
Without this patch, the load, unmerge, store, and select in the added test
would have unnecessary copies.
Differential Revision: https://reviews.llvm.org/D62426
llvm-svn: 361679
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
The fcsel and csel instructions differ in only the register banks they work on.
So, they're entirely interchangeable otherwise.
With this in mind, this does two things:
- Teach AArch64RegisterBankInfo to consider the inputs to G_SELECT as well as
the outputs.
- Teach it to choose the best register bank mapping based off the constraints
of the inputs and outputs.
The "best" in this case means the one that requires the smallest number of
copies to properly emit a fcsel/csel.
For example, if the inputs are all already going to be on FPRs, we should
emit a fcsel, even if the output is a GPR. This costs one copy to produce the
result, but saves us from copying the inputs into GPRs.
Also update the regbank-select.mir to check that we end up with the right
select instruction.
Differential Revision: https://reviews.llvm.org/D62267
llvm-svn: 361665
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
llvm-svn: 361644
For the situation, where we generate the following code:
crxor 8, 8, 8
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 8, 8
cror (COPY of CRbit) depends on the result of the crxor instruction.
CR8 is known to be zero as crxor is equivalent to CRUNSET. We can simply use
crxor 1, 1, 1 instead to zero out CR1, which does not have any dependency on
any previous instruction.
This patch will optimize it to:
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 1, 1
Patch By: Victor Huang (NeHuang)
Differential Revision: https://reviews.llvm.org/D62044
llvm-svn: 361632
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
swifterror marks an argument as a register pretending to be a pointer, so we
need a guaranteed mem2reg-like analysis of its uses. Fortunately most of the
infrastructure can be reused from the DAG world.
llvm-svn: 361608
The D45316 introduced the `shouldTransformMulToShiftsAddsSubs` function
to check that breaking down constant multiplications into a series
of shifts, adds, and subs is efficient. Unfortunately, this function
does not check maximum number of steps on all paths of the algorithm.
This patch fixes this bug.
Fix for PR41929.
Differential Revision: https://reviews.llvm.org/D62166
llvm-svn: 361606
When we are scheduling the load and addi, if all other heuristic didn't take effect,
we will try to schedule the addi before the load, to hide the latency, and avoid the
true dependency added by RA. And this only take effects for Power9.
Differential Revision: https://reviews.llvm.org/D61930
llvm-svn: 361600
Summary:
On Windows, X8 may be used to pass in the address of an aggregate that
is returned indirectly. Therefore, it should be forwarded to variadic
musttail calls and preserved in thunks.
Fixes PR41997
Reviewers: mgrang, efriedma
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62344
llvm-svn: 361585
Summary:
Appears identical to powerpc64{,le}.
Regenerate test that is being affected by upcoming patch.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: nemanjai, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62339
llvm-svn: 361543
We were assuming a much larger possible per-wave visible stack
allocation than is possible:
faa3ae5138/src/core/runtime/amd_gpu_agent.cpp (L70)
Based on this, we can assume the high 15 bits of a frame index or sret
are 0. The frame index value is the per-lane offset, so the maximum
frame index value is MAX_WAVE_SCRATCH / wavesize.
Remove the corresponding subtarget feature and option that made
this configurable.
llvm-svn: 361541
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 361527
Summary:
These features will both be implemented soon, so I thought I would
save time by adding the boilerplate for both of them at the same time.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62047
llvm-svn: 361516
When printing assembly for PtrToInt, AsmPrinter::lowerConstant
incorrectly assumed that if PtrToInt was not converting to an
int with exactly the same number of bits, it must be widening
to a larger int. But this isn't necessarily true; PtrToInt can
also shrink the size, which is useful when you want to produce
a known 32-bit pointer on a 64-bit platform (on x86_64 ELF
this yields a R_X86_64_32 relocation).
The old behavior of falling through to the widening case for a
narrowing PtrToInt yields bogus assembly code like this, which
fails to assemble because the no-op bit and it accidentally
creates is not a valid relocation:
```
.long a&-1
```
The fix is to treat a narrowing PtrToInt exactly the same as
it already treats Trunc: just emit the expression and let
the assembler deal with truncating it in the appropriate way.
Patch by Mat Hostetter <mjh@fb.com>.
Differential Revision: https://reviews.llvm.org/D61325
llvm-svn: 361508
The previous patch added a member set to store instructions that we
could allow to wrap. But this wasn't cleared between searches meaning
that they could get promoted, incorrectly, during the promotion of a
separate valid chain.
Differential Revision: https://reviews.llvm.org/D62254
llvm-svn: 361462
Summary:
In this patch, `ISD::RETURNADDR` is lowered on the emscripten target
to the new Emscripten runtime function `emscripten_return_address`, which
implements the functionality.
Patch by Guanzhong Chen
Reviewers: tlively, aheejin
Reviewed By: tlively
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62210
llvm-svn: 361454
In general dynamic/local dynamic TLS models, with -fno-plt,
* x86: emit `calll *___tls_get_addr@GOT(%ebx)` instead of `calll ___tls_get_addr@PLT`
Note, on x86, if we can get rid of %ebx as the PIC register,
it may be better to use a register not preserved across function calls.
* x86_64: emit `callq *__tls_get_addr@GOTPCREL(%rip)` instead of `callq __tls_get_addr@PLT`
Reorganize the code by separating 32-bit and 64-bit.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D62106
llvm-svn: 361453
We effectively had a second set of isel patterns that tried to use a
regular store instruction and an extract_subreg instruction. Or a masked move
and an extract_subreg. These patterns were intended to override the
matching of VEXTRACT instructions by taking advantage of the priority
of the explicit immediate 0 for the index.
This patch instaed just disables the immediate 0 matchin the VEXTRACT
patterns. This each of the component pieces of the larger patterns will
match by themselves.
This found a bug of sorts were we didn't use 128-bit store for 512->128
extract on KNL. Its unclear what the right thing here should be.
Using the vextract avoids constraining the register allocator to use
xmm0-15. But it always results in a longer encoding if the register
allocator ends up choosing xmm0-15 anyway.
llvm-svn: 361431
We were turning roundss/sd/ps/pd intrinsics with immediates of 1 or 2 into
llvm.floor/ceil. The llvm.ceil/floor intrinsics are supposed to correspond
to the libm functions. For the libm functions we need to disable the
precision exception so the llvm.floor/ceil functions should always map to
encodings 0x9 and 0xA.
We had a mix of isel patterns where some used 0x9 and 0xA and others used
0x1 and 0x2. We need to be consistent and always use 0x9 and 0xA.
Since we have no way in isel of knowing where the llvm.ceil/floor came
from, we can't map X86 specific intrinsics with encodings 1 or 2 to it.
We could map 0x9 and 0xA to llvm.ceil/floor instead, but I'd really like
to see a use case and optimization advantage first.
I've left the backend test cases to show the blend we now emit without
the extra isel patterns. But I've removed the InstCombine tests completely.
llvm-svn: 361425
This fix is for the problem from https://bugs.llvm.org/show_bug.cgi?id=38714.
Specifically, Simple Register Coalescing creates following conversion :
undef %0.sub_32:gpr64 = ORRWrs $wzr, %3:gpr32common, 0, debug-location !24;
It copies 32-bit value from gpr32 into gpr64. But Live DEBUG_VALUE analysis
is not able to create debug location record for that instruction. So the problem
is in that debug info for argc variable is incorrect. The fix is
to write custom isCopyInstrImpl() which would recognize the ORRWrs instr.
llvm-svn: 361417
Keep it optional in cases this is ever needed in some global
context. Currently it's only used for getting an upper bound inline
asm code size.
For AMDGPU, gfx10 increases the maximum instruction size to
20-bytes. This avoids penalizing older subtargets when estimating code
size, and making some annoying branch relaxation test adjustments.
llvm-svn: 361405
This is a minimal start to correcting a problem most directly discussed in PR38086:
https://bugs.llvm.org/show_bug.cgi?id=38086
We have been hacking around a limitation for FP select patterns by using the
fast-math-flags on the condition of the select rather than the select itself.
This patch just allows FMF to appear with the 'select' opcode. No changes are
needed to "FPMathOperator" because it already includes select-of-FP because
that definition is based on the (return) value type.
Once we have this ability, we can start correcting and adding IR transforms
to use the FMF on a 'select' instruction. The instcombine and vectorizer test
diffs only show that the IRBuilder change is behaving as expected by applying
an FMF guard value to 'select'.
For reference:
rL241901 - allowed FMF with fcmp
rL255555 - allowed FMF with FP calls
Differential Revision: https://reviews.llvm.org/D61917
llvm-svn: 361401
Does not affect update_llc_test_checks, or the actual output,
but is not accepted by the actual FileCheck.
Sorry, i should have noticed this before committing,
not the very next second after..
llvm-svn: 361398
Summary:
Another target that prefers to use `-march` in tests
```
llvm/test/CodeGen/SPARC$ grep -ri mtriple | wc -l
25
llvm/test/CodeGen/SPARC$ grep -ri march | wc -l
165
```
This test is being affected by a further patch,
so regenerate it to better visualize the changes
Reviewers: RKSimon, dcederman, gberry
Reviewed By: RKSimon
Subscribers: jyknight, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62242
llvm-svn: 361381
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
llvm-svn: 361356
Summary:
For big-endian powerpc64, the default ABI is ELFv1. OpenPower ABI ELFv2 is supported when -mabi=elfv2 is specified. FreeBSD support for PowerPC64 ELFv2 ABI with LLVM is in progress[1]. This patch adds an alternative way to specify ELFv2 ABI on target triple [2].
The following results are expected:
ELFv1 when using:
-target powerpc64-unknown-freebsd12.0
-target powerpc64-unknown-freebsd12.0 -mabi=elfv1
-target powerpc64-unknown-freebsd12.0-elfv1
ELFv2 when using:
-target powerpc64-unknown-freebsd12.0 -mabi=elfv2
-target powerpc64-unknown-freebsd12.0-elfv2
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
[2] https://clang.llvm.org/docs/CrossCompilation.html
Patch by Alfredo Dal'Ava Júnior!
Differential Revision: https://reviews.llvm.org/D61950
llvm-svn: 361355
Fix for https://bugs.llvm.org/show_bug.cgi?id=41971. Make the
combineVectorSizedSetCCEquality() transform more conservative by
checking that the bitcast to the vector type will be cheap/free
for both operands. I'm considering it cheap if it's a constant,
a load or already a vector. I've dropped the explicit check for
f128 because it should fall out naturally (in the cases where
it'd be detrimental).
Differential Revision: https://reviews.llvm.org/D62220
llvm-svn: 361352
CET-IBT enabled
Return-twice functions will indirectly jump after the caller's position.
So when CET-IBT is enable, we should make sure these is endbr*
instructions follow these Return-twice function caller. Like GCC does.
Patch by Xiang Zhang (xiangzhangllvm)
Differential Revision: https://reviews.llvm.org/D61881
llvm-svn: 361342
r360889 added new llround builtin functions. This patch adds their
signatures for the WebAssembly backend.
It also adds wasm32 support to utils/update_llc_test_checks.py, since
that's the script other targets are using for their testcases for this
feature.
Differential Revision: https://reviews.llvm.org/D62207
llvm-svn: 361327
Register coalescer fails for the test in the patch with the assertion in
JoinVals::ConflictResolution `DefMI != nullptr'. It attempts to join
live intervals for two adjacent instructions and erase the copy:
%2:vreg_256 = COPY %1
%3:vreg_256 = COPY killed %1
The LI needs to be adjusted to kill subrange for the erased instruction
and extend the subrange of the original def. That was done for the main
interval only but not for the subrange. As a result subrange had a VNI
pointing to the erased slot resulting in the above failure.
Differential Revision: https://reviews.llvm.org/D62162
llvm-svn: 361293
Add an intrinsic that takes 2 signed integers with the scale of them provided
as the third argument and performs fixed point multiplication on them. The
result is saturated and clamped between the largest and smallest representable
values of the first 2 operands.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55720
llvm-svn: 361289
Meaning if we were to produce 'neg' in dagcombine, we will get an
endless cycle; some inverse transform would need to be guarded somehow.
Also, the 'and (sub 0, x), 31' variant is sticky,
doesn't get optimized in any way.
https://bugs.llvm.org/show_bug.cgi?id=41952
llvm-svn: 361254
Some checks in isShuffleMaskLegal expect an even number of elements,
e.g. isTRN_v_undef_Mask or isUZP_v_undef_Mask, otherwise they access
invalid elements and crash. This patch adds checks to the impacted
functions.
Fixes PR41951
Reviewers: t.p.northover, dmgreen, samparker
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D60690
llvm-svn: 361235
PrepareConstants step converts add/sub with 'negative' immediates to
sub/add with a 'positive' imm to make promotion more simple. nuw
already states that the add shouldn't cause an unsigned wrap, so
it shouldn't need any tweaking. Plus, we also don't allow a sub with
a 'negative' immediate to be safe wrap, so this functionality has
been removed. The PrepareConstants step now just handles the add
instructions that we've determined would be safe if they wrap around
zero.
Differential Revision: https://reviews.llvm.org/D62057
llvm-svn: 361227
Summary:
The endianess used in the calling convention does not always match the
endianess of the target on all architectures, namely AVR.
When an argument is too large to be legalised by the architecture and is
split for the ABI, a new hook TargetLoweringInfo::shouldSplitFunctionArgumentsAsLittleEndian
is queried to find the endianess that function arguments must be laid
out in.
This approach was recommended by Eli Friedman.
Originally reported in https://github.com/avr-rust/rust/issues/129.
Patch by Carl Peto.
Reviewers: bogner, t.p.northover, RKSimon, niravd, efriedma
Reviewed By: efriedma
Subscribers: JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62003
llvm-svn: 361222
Unfortunately the way SIInsertSkips works is backwards, and is
required for correctness. r338235 added handling of some special cases
where skipping is mandatory to avoid side effects if no lanes are
active. It conservatively handled asm correctly, but the same logic
needs to apply to calls.
Usually the call sequence code is larger than the skip threshold,
although the way the count is computed is really broken, so I'm not
sure if anything was likely to really hit this.
llvm-svn: 361202
That commit makes sure we flush PendingExports in SelectDAGBuilder
before we create INLINEASM_BR. Unfortunatley, I haven't yet found
a CodeGen failure without that change.
This commit uses the debug output from SelectionDAG to at least
ensure we build the DAG correctly.
llvm-svn: 361179
Fixes issue reported by aemerson on D57348. Vector op legalization
support is added for uaddo, usubo, saddo and ssubo (umulo and smulo
were already supported). As usual, by extracting TargetLowering methods
and calling them from vector op legalization.
Vector op legalization doesn't really deal with multiple result nodes,
so I'm explicitly performing a recursive legalization call on the
result value that is not being legalized.
There are some existing test changes because expansion happens
earlier, so we don't get a DAG combiner run in between anymore.
Differential Revision: https://reviews.llvm.org/D61692
llvm-svn: 361166
The code did not match the example in the comment, and was checking
the undef flag on the copy dest instead of source. The existing tests
were only hitting the > 2 operands case.
llvm-svn: 361156
The scalar start/accumulator value of the fadd- and fmul reduction
should match the result type of the reduction, as well as the vector
element-type of the input vector. Although this was not explicitly
specified in the LangRef, it was taken for granted in code implementing
the reductions. The patch also fixes the LangRef by adding this
constraint.
Reviewed By: aemerson, nikic
Differential Revision: https://reviews.llvm.org/D60260
llvm-svn: 361133
Summary:
Avoid introducing hazard mitigation when lgkmcnt is reduced to 0.
Clarify code comments to explain assumptions made for this hazard
mitigation. Expand and correct test cases to cover variants of
s_waitcnt.
Reviewers: nhaehnle, rampitec
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62058
llvm-svn: 361124
Summary:
Was looking into supporting `(srl (shl x, c1), c2)` with c1 != c2 in dagcombiner,
this test changes, but makes `update_llc_test_checks.py` unhappy.
**Many** AMDGPU tests specify `-march`, not `-mtriple`, which results in `update_llc_test_checks.py`
defaulting to x86 asm function detection heuristics, which don't work here.
I propose to fix this by adding an infrastructure to map from `-march` to `-mtriple`,
in the UpdateTestChecks tooling.
Reviewers: RKSimon, MaskRay, arsenm
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62099
llvm-svn: 361101
Summary:
Was looking into supporting `(srl (shl x, c1), c2)` with c1 != c2 in dagcombiner,
this test changes, but makes `update_llc_test_checks.py` unhappy
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62097
llvm-svn: 361100
This is ported from the custom AMDGPU DAG implementation. I think this
is a better default expansion than what the DAG currently uses, at
least if the target has CTLZ.
This implements the signed version in terms of the unsigned
conversion, which is implemented with bit operations. SelectionDAG has
several other implementations that should eventually be ported
depending on what instructions are legal.
llvm-svn: 361081
Same as what we do for vector reductions in combineHorizontalPredicateResult, use movmsk+cmp for scalar (and(extract(x,0),extract(x,1)) reduction patterns.
llvm-svn: 361052
Summary:
That check claims that the transform is illegal otherwise.
That isn't true:
1. For `ISD::ADD`, we only process `ISD::SHL` outer shift => sign bit does not matter
https://rise4fun.com/Alive/K4A
2. For `ISD::AND`, there is no restriction on constants:
https://rise4fun.com/Alive/Wy3
3. For `ISD::OR`, there is no restriction on constants:
https://rise4fun.com/Alive/GOH
3. For `ISD::XOR`, there is no restriction on constants:
https://rise4fun.com/Alive/ml6
So, why is it there then?
This changes the testcase that was touched by @spatel in rL347478,
but i'm not sure that test tests anything particular?
Reviewers: RKSimon, spatel, craig.topper, jojo, rengolin
Reviewed By: spatel
Subscribers: javed.absar, llvm-commits, spatel
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61918
llvm-svn: 361044
With a fix for PR41917: The predecessor list was changing under our feet.
- for (BasicBlock *Pred : predecessors(EntryBlock_)) {
+ while (!pred_empty(EntryBlock_)) {
+ BasicBlock* const Pred = *pred_begin(EntryBlock_);
llvm-svn: 361009
Summary:
In order to combine memory operations efficiently, the load/store
optimizer might move some instructions around. It's usually safe
to move instructions down past the merged instruction because the
pass checks if memory operations can be re-ordered.
Though, the current logic doesn't handle Write-after-Write hazards.
This fixes a reflection issue with Monster Hunter World and DXVK.
v2: - rebased on top of master
- clean up the test case
- handle WaW hazards correctly
Bugzilla: https://bugs.llvm.org/show_bug.cgi?id=40130
Original patch by Samuel Pitoiset.
Reviewers: tpr, arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: ronlieb, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D61313
llvm-svn: 361008
Make sure to not unroll a vector division/remainder (with a constant splat
divisor) after type legalization, since the scalar type may then be illegal.
Review: Ulrich Weigand
https://reviews.llvm.org/D62036
llvm-svn: 360965
The recent introduction of v3i32 etc as an MVT, and its use in AMDGPU
3-dword memory instructions, caused a de-optimization problem for code
with such a load that then bitcasts via vector of i8, because v12i8 is
not an MVT so it legalizes the bitcast by widening it.
This commit adds the ability to widen a bitcast using extract_subvector
on the result, so the value does not need to go via memory.
Differential Revision: https://reviews.llvm.org/D60457
Change-Id: Ie4abb7760547e54a2445961992eafc78e80d4b64
llvm-svn: 360942
This suppresses exceptions which is what we should be doing for ceil and floor. We already use the correct immediate
in patterns without masking.
llvm-svn: 360915
This is the conservatively correct default. It is always safe to
assume xnack is enabled, but not the converse.
Introduce a feature to blacklist targets where xnack can never be
meaningfully enabled. I'm not sure the targets this is applied to is
100% correct.
llvm-svn: 360903
This patch add the ISD::LROUND and ISD::LLROUND along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lround/llround generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
llvm-svn: 360889
Trace through multiple COPYs when looking for a physreg source. Add
hinting for vregs that will be copied into physregs (we only hinted
for vregs getting copied to a physreg previously). Give hinted a
register a bonus when deciding which value to spill. This is part of
my rewrite regallocfast series. In fact this one doesn't even have an
effect unless you also flip the allocation to happen from back to
front of a basic block. Nonetheless it helps to split this up to ease
review of D52010
Patch by Matthias Braun
llvm-svn: 360887
If we're trying to match an LEA, its possible the LEA match will be deemed unprofitable. In which case the negation we created in matchAddress would be left dangling in the SelectionDAG. This could artificially increase use counts for other nodes in the DAG. Though I don't have an example of that. But it just seems like bad form to have dangling nodes in isel.
Differential Revision: https://reviews.llvm.org/D61047
llvm-svn: 360823
Before this change, they were erroneously constructed with the EH_LABEL
SDNode opcode, which caused other passes to interact with them in
incorrect ways. See the FIXME about fastisel that this addresses in the
existing test case.
Fixes PR41890
llvm-svn: 360818
Summary:
Otherwise, we emit directives for CFI without any actual CFI opcodes to
go with them, which causes tools to malfunction. The technique is
similar to what the x86 backend already does.
Fixes https://bugs.llvm.org/show_bug.cgi?id=40876
Patch by: froydnj (Nathan Froyd)
Reviewers: mstorsjo, eli.friedman, rnk, mgrang, ssijaric
Reviewed By: rnk
Subscribers: javed.absar, kristof.beyls, llvm-commits, dmajor
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61960
llvm-svn: 360816
Summary:
The emitError path allows the program to continue, unlike report_fatal_error.
This is friendlier to use cases where LLVM is embedded in a larger program,
because the caller may be able to deal with the error somewhat gracefully.
Change the number of requested NOP bytes in the AArch64 and PowerPC
test cases to avoid triggering an unrelated assertion. The compilation
still fails, as verified by the test.
Change-Id: Iafb9ca341002a597b82e59ddc7a1f13c78758e3d
Reviewers: arsenm, MatzeB
Subscribers: qcolombet, nemanjai, wdng, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61489
llvm-svn: 360786
Summary:
SGPR in CC can be either hw initialized or set by other chained shaders
and so this increases the SGPR count availalbe to CC to 105.
Change-Id: I3dfadc750fe4a3e2bd07117a2899fd13f3e2fef3
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61261
llvm-svn: 360778
Instead of patching the original blocks, we now generate new blocks and
delete the old blocks. This results in simpler code with a less twisted
control flow (see the change in `entry-block-shuffled.ll`).
This will make https://reviews.llvm.org/D60318 simpler by making it more
obvious where control flow created and deleted.
Reviewers: gchatelet
Subscribers: hiraditya, llvm-commits, spatel
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61736
llvm-svn: 360771
The new cortex-m schedule in rL360768 helps performance, but can increase the
amount of high-registers used. This, on average, ends up increasing the
codesize by a fair amount (because less instructions are converted from T2 to
T1). On cortex-m at -Oz, where we are quite size-paranoid, it is better to use
the existing DAG scheduler with the RegPressure scheduling preference (at least
until the issues around T2 vs T1 instructions can be improved).
I have also made sure that the Sched::RegPressure dag scheduler is always
chosen for MinSize.
The test shows one case where we increase the number of registers used.
Differential Revision: https://reviews.llvm.org/D61882
llvm-svn: 360769
This patch adds a simple Cortex-M4 schedule, renaming the existing M3
schedule to M4 and filling in the latencies as-per the Cortex-M4 TRM:
https://developer.arm.com/docs/ddi0439/latest
Most of these are 1, with the important exception being loads taking 2
cycles. A few others are also higher, but I don't believe they make a
large difference. I've repurposed the M3 schedule as the latencies are
mostly the same between the two cores, with the M4 having more FP and
DSP instructions. We also turn on MISched and UseAA for the cores that
now use this.
It also adds some schedule Write's to various instruction to make things
simpler.
Differential Revision: https://reviews.llvm.org/D54142
llvm-svn: 360768
They encode the same way, but OR32mi8Locked sets hasUnmodeledSideEffects set
which should be stronger than the mayLoad/mayStore on LOCK_OR32mi8. I think
this makes sense since we are using it as a fence.
This also seems to hide the operation from the speculative load hardening pass
so I've reverted r360511.
llvm-svn: 360747
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
This was the portion split off D58632 so that it could follow the redzone API cleanup. Note that I changed the offset preferred from -8 to -64. The difference should be very minor, but I thought it might help address one concern which had been previously raised.
Differential Revision: https://reviews.llvm.org/D61862
llvm-svn: 360719
Unlike instcombine, we currently don't turn and+shift into shift+and.
We probably should, likely unconditionally.
While i'm adding only all-ones (potentially shifted) mask,
this obviously isn't limited to any particular mask pattern:
https://rise4fun.com/Alive/kmX
Related to https://bugs.llvm.org/show_bug.cgi?id=41874
llvm-svn: 360706
Tighten conditions on SMEM WAR hazard unit tests to ensure rejection
of workaround insertion where a s_waitcnt is present in dependency
chain. The current workaround code already conforms to these revise
tests.
llvm-svn: 360686
D61068 handled vector shifts, this patch does the same for scalars where there are similar number of pipes for shifts as bit ops - this is true almost entirely for AMD targets where the scalar ALUs are well balanced.
This combine avoids AND immediate mask which usually means we reduce encoding size.
Some tests show use of (slow, scaled) LEA instead of SHL in some cases, but thats due to particular shift immediates - shift+mask generate these just as easily.
Differential Revision: https://reviews.llvm.org/D61830
llvm-svn: 360684
For known CRBit spills, CRSET/CRUNSET, it is more efficient to load and spill
the known value instead of extracting the bit.
eg. This sequence is currently used to spill a CRUNSET:
crclr 4*cr5+lt
mfocrf r3,4
rlwinm r3,r3,20,0,0
stw r3,132(r1)
This patch custom lower it to:
li r3,0
stw r3,132(r1)
Differential Revision: https://reviews.llvm.org/D61754
llvm-svn: 360677
When breaking up loads and stores of aggregates, the IRTranslator uses
LLT::scalar(64) for the index type of the G_GEP instructions that
compute the addresses. This is unnecessarily large for 32-bit targets.
Use the int ptr type provided by the DataLayout instead.
Note that we're already doing the right thing when translating
getelementptr instructions from the IR. This is just an oversight when
generating new ones while translating loads/stores.
Both x86 and AArch64 already have tests confirming that the old
behaviour is preserved for 64-bit targets.
Differential Revision: https://reviews.llvm.org/D61852
llvm-svn: 360656
This is a follow on to D58632, with the same logic. Given a memory operation which needs ordering, but doesn't need to modify any particular address, prefer to use a locked stack op over an mfence.
Differential Revision: https://reviews.llvm.org/D61863
llvm-svn: 360649
X32 can refer to a 64-bit ABI that uses 32-bit ints, longs, and pointers.
I plan to add gnux32 command lines to this test so this prepares for that.
Also remove some check lines that have a prefix that is not in any run lines.
llvm-svn: 360642
Usually this will abort fast-isel at the instruction using the
non-legal result, but if the only use is in a different basic block,
we'll incorrectly assume that the zext/sext is to i32 (rather than
i128 in this case).
Differential Revision: https://reviews.llvm.org/D61823
llvm-svn: 360616
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
Fixes the regression noted in D61782 where a VZEXT_MOVL was being inserted because we weren't discriminating between 'zeroable' and 'all undef' for the upper elts.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360596
Now that we can use HADD/SUB for scalar additions from any pair of extracted elements (D61263), we can relax the one use limit as we will be able to merge multiple uses into using the same HADD/SUB op.
This exposes a couple of missed opportunities in LowerBuildVectorv4x32 which will be committed separately.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360594
We catch most of these patterns (on x86 at least) by matching
a concat vectors opcode early in combining, but the pattern may
emerge later using insert subvector instead.
The AVX1 diffs for add/sub overflow show another missed narrowing
pattern. That one may be falling though the cracks because of
combine ordering and multiple uses.
llvm-svn: 360585
The new fptrunc and fpext intrinsics are constrained versions of the
regular fptrunc and fpext instructions.
Reviewed by: Andrew Kaylor, Craig Topper, Cameron McInally, Conner Abbot
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D55897
llvm-svn: 360581
This adds the FPC (floating-point control register) as a reserved
physical register and models its use by SystemZ instructions.
Note that only the current rounding modes and the IEEE exception
masks are modeled. *Changes* of the FPC due to exceptions (in
particular the IEEE exception flags and the DXC) are not modeled.
At this point, this patch is mostly NFC, but it will prevent
scheduling of floating-point instructions across SPFC/LFPC etc.
llvm-svn: 360570
When deciding the safety of generating smlad, we checked for any
writes within the block that may alias with any of the loads that
need to be widened. This is overly conservative because it only
matters when there's a potential aliasing write to a location
accessed by a pair of loads.
Now we check for aliasing writes only once, during setup. If two
loads are found to have an aliasing write between them, we don't add
these loads to LoadPairs. This means that later during the transform,
we can safely widened a pair without worrying about aliasing.
However, to maintain correctness, we also need to change the way that
wide loads are inserted because the order is now important.
The MatchSMLAD method has also been changed, absorbing
MatchReductions and AddMACCandidate to hopefully improve readability.
Differential Revision: https://reviews.llvm.org/D6102
llvm-svn: 360567
Summary:
When we know for sure whether two addresses do or do not alias, we
should immediately return from DAGCombiner::isAlias().
I think this comes from a bad copy/paste, Sorry for not catching that during the
code review.
Fixes PR41855.
Reviewers: niravd, gchatelet, EricWF
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61846
llvm-svn: 360566
Currently, without -g, BTF sections may still be emitted with
data sections, e.g., for linux kernel bpf selftest
test_tcp_check_syncookie_kern.c issue discovered by Martin
as shown below.
-bash-4.4$ bpftool btf dump file test_tcp_check_syncookie_kern.o
[1] VAR 'results' type_id=0, linkage=global-alloc
[2] VAR '_license' type_id=0, linkage=global-alloc
[3] DATASEC 'license' size=0 vlen=1
type_id=2 offset=0 size=4
[4] DATASEC 'maps' size=0 vlen=1
type_id=1 offset=0 size=28
Let disable BTF generation if no debuginfo, which is
the original design.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61826
llvm-svn: 360556
I've included a new fix in X86RegisterInfo to prevent PR41619 without
reintroducing r359392. We might be able to improve that in the base class
implementation of shouldRewriteCopySrc somehow. But this hopefully enables
forward progress on SimplifyDemandedBits improvements for now.
Original commit message:
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGComb
but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
llvm-svn: 360552
I noticed that we were failing to narrow an x86 ymm math op in a case similar
to the 'madd' test diff. That is because a bitcast is sitting between the math
and the extract subvector and thwarting our pattern matching for narrowing:
t56: v8i32 = add t59, t58
t68: v4i64 = bitcast t56
t73: v2i64 = extract_subvector t68, Constant:i64<2>
t96: v4i32 = bitcast t73
There are a few wins and neutral diffs in the other tests.
Differential Revision: https://reviews.llvm.org/D61806
llvm-svn: 360541
See if we can simplify the demanded vector elts from the extraction before trying to simplify the demanded bits.
This helps us with target shuffles and hops in particular.
llvm-svn: 360535
Summary: Skip over prefetches when assigning debug info to instructions with memory operands. This way, the debug info is stable after instrumenting a binary with prefetches, allowing for iterative profiling and instrumentation.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61789
llvm-svn: 360471
Split out from D61692 per RKSimon's suggestion. Vector op
legalization will automatically recursively legalize the returned
SDValue, but we need to take care of the other results ourselves.
Otherwise it will end up getting legalized only during op
legalization, by which point it might be too late (though I'm not
aware of any specific cases right now).
There are codegen differences because expansion occurs earlier now
and we don't get a DAGCombiner run in between.
Differential Revision: https://reviews.llvm.org/D61744
llvm-svn: 360470
This fix allows the scheduler to take into account the number of instances of
each ProcResource specified. Previously a declaration in a scheduler of
ProcResource<1> would be treated identically to a declaration of
ProcResource<2>. Now the hazard recognizer would report a hazard only after all
of the resource instances are busy.
Patch by Jackson Woodruff and Momchil Velikov.
Differential Revision: https://reviews.llvm.org/D51160
llvm-svn: 360441
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 360436
If we only use the lower xmm of a ymm hop, then extract the xmm's (for free), perform the xmm hop and then insert back into a ymm (for free).
Fixes some of the regressions noted in D61782
llvm-svn: 360435
The current PIC model for WebAssembly is more like ELF in that it
allows symbol interposition.
This means that more functions end up being addressed via the GOT
and fewer directly added to the wasm table.
One effect is a reduction in the number of wasm table entries similar
to the previous attempt in https://reviews.llvm.org/D61539 which was
reverted.
Differential Revision: https://reviews.llvm.org/D61772
llvm-svn: 360402
This also allows three op patterns to use increased constant bus
limit of GFX10.
Differential Revision: https://reviews.llvm.org/D61763
llvm-svn: 360395
The current lowering uses an mfence. mfences are substaintially higher latency than the locked operations originally requested, but we do want to avoid contention on the original cache line. As such, use a locked instruction on a cache line assumed to be thread local.
Differential Revision: https://reviews.llvm.org/D58632
llvm-svn: 360393
As reported on PR39920, "slow horizontal ops" targets tend to internally expand to 2*shuffle+add/sub - so if we can reduce 2*shuffle+add/sub to a hadd/sub then we should do it - similar port usage but reduced instruction count.
This works out in most cases, although the "PR22377" regression in vector-shuffle-combining.ll is annoying - going from 2*shuffle+add+shuffle to hadd+2*shuffle - I've opened PR41813 to cover this.
Differential Revision: https://reviews.llvm.org/D61308
llvm-svn: 360360
Add an Argument that has the SExtAttr attached, as well as SIToFP
instructions, as values that generate sign bits. SIToFP doesn't
strictly do this and could be treated as a sink to be sign-extended.
Differential Revision: https://reviews.llvm.org/D61381
llvm-svn: 360331
This patch allows for expansion of ADDCARRY and SUBCARRY when the target does not support it.
Differential Revision: https://reviews.llvm.org/D61411
llvm-svn: 360303
This is extracted from the original draft of D61419 with some additional tests.
We don't currently get this in IR (it's conservatively turned into a NaN),
but presumably that'll get updated as we add real IR support for 'fneg'
rather than 'fsub -0.0, x'.
The x86-32 run shows the following, and I haven't looked further to see why,
but that seems to be independent:
Legalizing: t1: f32 = undef
Trying to expand node
Creating fp constant: t4: f32 = ConstantFP<0.000000e+00>
Differential Revision: https://reviews.llvm.org/D61516
llvm-svn: 360296
The VOP3 form should always be the preferred selection, to be shrunk
later. This should only be an optimization issue, but this partially
works around a problem from clobbering VCC when SIFixSGPRCopies
rewrites an SCC defining operation directly to VCC.
3 of the testcases are regressions from failing to fold the immediate
in cases it should. These can be avoided by improving the VCC liveness
handling in SIFoldOperands. Simply increasing the threshold to
computeRegisterLiveness works, although this is common enough that VCC
liveness should probably be tracked throughout the pass. The hack of
leaving behind an implicit_def instruction to avoid breaking iterator
wastes instruction count, which inhibits finding the VCC def in long
chains of adds. Doing this however exposes different, worse looking
regressions from poor scheduling behavior. This could probably be
avoided around by forcing the shrink of the addc here, but the
scheduler should probably be fixed.
The r600 add test needs to be split out because it asserts on the
arguments in the new test during the calling convention lowering.
llvm-svn: 360293
When assigning the definitions of an instruction we were updating
the available registers while walking the definitions. Some of
those definitions may be from physical registers and thus, they are
not available for other definitions to take, but by the time we see
that we may have already assign these registers to another
virtual register.
Fix that by walking through all the definitions and mark as unavailable
the physical register definitions, then do the virtual register assignments.
PR41790
llvm-svn: 360278
This patch adds support for calling selectFNeg for FNeg instructions in addition to the fsub idiom
Differential Revision: https://reviews.llvm.org/D61624
llvm-svn: 360273
Petar Avramovic