Summary:
It looks like since INLINEASM_BR was created off of INLINEASM (r353563),
a few checks for INLINEASM needed to be updated to check for either
case.
pr/41999
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: nemanjai, hiraditya, kbarton, jsji, llvm-commits, craig.topper, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62403
llvm-svn: 362278
In PPCReduceCRLogicals after splitting the original MBB into 2, the 2 impacted branches still use original branch probability. This is unreasonable. Suppose we have following code, and the probability of each successor is 50%.
condc = conda || condb
br condc, label %target, label %fallthrough
It can be transformed to following,
br conda, label %target, label %newbb
newbb:
br condb, label %target, label %fallthrough
Since each branch has a probability of 50% to each successor, the total probability to %fallthrough is 25% now, and the total probability to %target is 75%. This actually changed the original profiling data. A more reasonable probability can be set to 70% to the false side for each branch instruction, so the total probability to %fallthrough is close to 50%.
This patch assumes the branch target with two incoming edges have same edge frequency and computes new probability fore each target, and keep the total probability to original targets unchanged.
Differential Revision: https://reviews.llvm.org/D62430
llvm-svn: 362237
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
For the situation, where we generate the following code:
crxor 8, 8, 8
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 8, 8
cror (COPY of CRbit) depends on the result of the crxor instruction.
CR8 is known to be zero as crxor is equivalent to CRUNSET. We can simply use
crxor 1, 1, 1 instead to zero out CR1, which does not have any dependency on
any previous instruction.
This patch will optimize it to:
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 1, 1
Patch By: Victor Huang (NeHuang)
Differential Revision: https://reviews.llvm.org/D62044
llvm-svn: 361632
When we are scheduling the load and addi, if all other heuristic didn't take effect,
we will try to schedule the addi before the load, to hide the latency, and avoid the
true dependency added by RA. And this only take effects for Power9.
Differential Revision: https://reviews.llvm.org/D61930
llvm-svn: 361600
When the tiny code model is requested for a target machine that does not
support this, we get an error message (which is nice) but also this diagnostic
and request to submit a bug report:
fatal error: error in backend: Target does not support the tiny CodeModel
[Inferior 2 (process 31509) exited with code 0106]
clang-9: error: clang frontend command failed with exit code 70 (use -v to see invocation)
(gdb) clang version 9.0.0 (http://llvm.org/git/clang.git 29994b0c63a40f9c97c664170244a7bba5ecc15e) (http://llvm.org/git/llvm.git 95606fdf91c2d63a931e865f4b78b2e9828ddc74)
Target: arm-arm-none-eabi
Thread model: posix
clang-9: note: diagnostic msg: PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script.
clang-9: note: diagnostic msg:
********************
PLEASE ATTACH THE FOLLOWING FILES TO THE BUG REPORT:
Preprocessed source(s) and associated run script(s) are located at:
clang-9: note: diagnostic msg: /tmp/tiny-dfe1a2.c
clang-9: note: diagnostic msg: /tmp/tiny-dfe1a2.sh
clang-9: note: diagnostic msg:
But this is not a bug, this is a feature. :-) Not only is this not a bug, this
is also pretty confusing. This patch causes just to print the fatal error and
not the diagnostic:
fatal error: error in backend: Target does not support the tiny CodeModel
Differential Revision: https://reviews.llvm.org/D62236
llvm-svn: 361370
Summary:
For big-endian powerpc64, the default ABI is ELFv1. OpenPower ABI ELFv2 is supported when -mabi=elfv2 is specified. FreeBSD support for PowerPC64 ELFv2 ABI with LLVM is in progress[1]. This patch adds an alternative way to specify ELFv2 ABI on target triple [2].
The following results are expected:
ELFv1 when using:
-target powerpc64-unknown-freebsd12.0
-target powerpc64-unknown-freebsd12.0 -mabi=elfv1
-target powerpc64-unknown-freebsd12.0-elfv1
ELFv2 when using:
-target powerpc64-unknown-freebsd12.0 -mabi=elfv2
-target powerpc64-unknown-freebsd12.0-elfv2
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
[2] https://clang.llvm.org/docs/CrossCompilation.html
Patch by Alfredo Dal'Ava Júnior!
Differential Revision: https://reviews.llvm.org/D61950
llvm-svn: 361355
On PowerPC64 ELFv2 ABI, functions may have 2 entry points: global and local.
The local entry point location of a function is stored in the st_other field of the symbol, as an offset relative to the global entry point.
In order to make symbol assignments (e.g. .equ/.set) work properly with this, PPCTargetELFStreamer already copies the local entry bits from the source symbol to the destination one, on emitAssignment(). The problem is that this copy is performed only at the assignment location, where the source symbol may not yet have processed the .localentry directive, that sets the local entry. This may cause the destination symbol to end up with wrong local entry information. Other symbol info is not affected by this because, in this case, the destination symbol value is actually a symbol reference.
This change keeps track of these assignments, and update all needed st_other fields when finish() is called.
Patch by Leandro Lupori!
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D56586
llvm-svn: 361237
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
llvm-svn: 360990
Replace the member variable Target with Triple
Use Triple instead of TheTarget.getName() to dispatch on 32-bit/64-bit.
Delete redundant parameters
llvm-svn: 360986
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360731
For known CRBit spills, CRSET/CRUNSET, it is more efficient to load and spill
the known value instead of extracting the bit.
eg. This sequence is currently used to spill a CRUNSET:
crclr 4*cr5+lt
mfocrf r3,4
rlwinm r3,r3,20,0,0
stw r3,132(r1)
This patch custom lower it to:
li r3,0
stw r3,132(r1)
Differential Revision: https://reviews.llvm.org/D61754
llvm-svn: 360677
For some targets, there is a circular dependency between InstPrinter and
MCTargetDesc. Merging them together will fix this. For the other targets,
the merging is to maintain consistency so all targets will have the same
structure.
llvm-svn: 360502
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
The single-constant algorithm produces infinities on a lot of denormal values.
The precision of the two-constant algorithm is actually sufficient across the
range of denormals. We will switch to that algorithm for now to avoid the
infinities on denormals. In the future, we will re-evaluate the algorithm to
find the optimal one for PowerPC.
Differential revision: https://reviews.llvm.org/D60037
llvm-svn: 360144
A condition for exiting the legalization of v4i32 conversion to v2f64 through
extract/convert/build erroneously checks for the extract having type i32.
This is not adequate as smaller extracts are actually legalized to i32 as well.
Furthermore, an early exit is missing which means that we only check that
both extracts are from the same vector if that check fails.
As a result, both cases in the included test case fail - the first gets a
select error and the second generates incorrect code.
The culprit commit is r274535.
llvm-svn: 360043
Summary:
Based on the Eli Friedman's comments in https://reviews.llvm.org/D60811 , we'd better return early if the element type is not byte-sized in `combineBVOfConsecutiveLoads`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61076
llvm-svn: 359764
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Change the PPCISelLowering.cpp function that decides to avoid update form in
favor of partial vector loads to know about newer load types and to not be
confused by the chain operand.
Differential Revision: https://reviews.llvm.org/D60102
llvm-svn: 359504
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
The PPC vector cost model values for insert/extract element reflect older
processors that lacked vector insert/extract and move-to/move-from VSR
instructions. Update getVectorInstrCost to give appropriate values for when
the newer instructions are present.
Differential Revision: https://reviews.llvm.org/D60160
llvm-svn: 359313
Using initial-exec TLS variables is a reasonable performance
optimisation for system libraries. Use the correct PIC mechanism to get
hold of the GOT to avoid text relocations.
Differential Revision: https://reviews.llvm.org/D61026
llvm-svn: 359146
Summary:
This issue from the bugzilla: https://bugs.llvm.org/show_bug.cgi?id=41177
When the two operands for BUILD_VECTOR are same, we will get assert error.
llvm::SDValue combineBVOfConsecutiveLoads(llvm::SDNode*, llvm::SelectionDAG&):
Assertion `!(InputsAreConsecutiveLoads && InputsAreReverseConsecutive) &&
"The loads cannot be both consecutive and reverse consecutive."' failed.
This error caused by the wrong ElemSIze when calling isConsecutiveLS(). We
should use `getScalarType().getStoreSize();` to get the ElemSize instread of
`getScalarSizeInBits() / 8`.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60811
llvm-svn: 358644
Summary:
None of these derived classes do anything that the base class cannot.
If we remove these case statements, then the base class can handle them
just fine.
Reviewers: peter.smith, echristo
Reviewed By: echristo
Subscribers: nemanjai, javed.absar, eraman, kristof.beyls, hiraditya, kbarton, jsji, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60803
llvm-svn: 358603
Summary:
Some llc debug options need pass-name as the parameters.
But if we use the pass-name ppc-early-ret, we will get below error:
llc test.ll -stop-after ppc-early-ret
LLVM ERROR: "ppc-early-ret" pass is not registered.
Below pass-names have the pass is not registered error:
ppc-ctr-loops
ppc-ctr-loops-verify
ppc-loop-preinc-prep
ppc-toc-reg-deps
ppc-vsx-copy
ppc-early-ret
ppc-vsx-fma-mutate
ppc-vsx-swaps
ppc-reduce-cr-ops
ppc-qpx-load-splat
ppc-branch-coalescing
ppc-branch-select
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60248
llvm-svn: 358271
Summary:
Some llc debug options need pass-name as the parameters.
But if we use the pass-name ppc-early-ret, we will get below error:
llc test.ll -stop-after ppc-early-ret
LLVM ERROR: "ppc-early-ret" pass is not registered.
Below pass-names have the pass is not registered error:
ppc-ctr-loops
ppc-ctr-loops-verify
ppc-loop-preinc-prep
ppc-toc-reg-deps
ppc-vsx-copy
ppc-early-ret
ppc-vsx-fma-mutate
ppc-vsx-swaps
ppc-reduce-cr-ops
ppc-qpx-load-splat
ppc-branch-coalescing
ppc-branch-select
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60248
llvm-svn: 358256
There are 3 operands of maddld, (add (mul %1, %2), %3) and sometimes
they are constant. If there is constant operand, it takes extra li to
materialize the operand, and one more extra register too. So it's not
profitable to use maddld to optimize mul-add pattern.
Differential Revision: https://reviews.llvm.org/D60181
llvm-svn: 358253
Summary:
The InlineAsm::AsmDialect is only required for X86; no architecture
makes use of it and as such it gets passed around between arch-specific
and general code while being unused for all architectures but X86.
Since the AsmDialect is queried from a MachineInstr, which we also pass
around, remove the additional AsmDialect parameter and query for it deep
in the X86AsmPrinter only when needed/as late as possible.
This refactor should help later planned refactors to AsmPrinter, as this
difference in the X86AsmPrinter makes it harder to make AsmPrinter more
generic.
Reviewers: craig.topper
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, llvm-commits, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60488
llvm-svn: 358101
Did experiments on power 9 machine, checked the outputs for NaN & Infinity+
cases with corresponding DCMX bit set. Confirmed the DCMX mask bit for NaN and
infinity+ are reversed.
This patch fixes the issue.
Patch by Victor Huang.
Differential Revision: https://reviews.llvm.org/D59384
llvm-svn: 357494
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
A shift and add/sub sequence combination is faster in place of a multiply by constant.
Because the cycle or latency of multiply is not huge, we only consider such following
worthy patterns.
```
(mul x, 2^N + 1) => (add (shl x, N), x)
(mul x, -(2^N + 1)) => -(add (shl x, N), x)
(mul x, 2^N - 1) => (sub (shl x, N), x)
(mul x, -(2^N - 1)) => (sub x, (shl x, N))
```
And the cycles or latency is subtarget-dependent so that we need consider the
subtarget to determine to do or not do such transformation.
Also data type is considered for different cycles or latency to do multiply.
Differential Revision: https://reviews.llvm.org/D58950
llvm-svn: 357233
This patch lays the groundwork for extending the generic machine scheduler by providing a PPC-specific implementation.
There are no functional changes as this is an incremental patch that simply provides the necessary overrides which just
encapsulate the behavior of the generic scheduler. Subsequent patches will add specific behavior.
Differential Revision: https://reviews.llvm.org/D59284
llvm-svn: 357047
This patch splits the huge function PPCBranchSelector.cpp:runOnMachineFunction into several smaller functions.
No functional change.
Differential Revision: https://reviews.llvm.org/D59623
llvm-svn: 357033
The UseVSXReg flag can be safely removed and the code cleaned up.
Patch By: Yi-Hong Liu
Differential Revision: https://reviews.llvm.org/D58685
llvm-svn: 357028
These changes are related to PR37743 and include:
SelectionDAGBuilder::visitSelect handles the unary SelectPatternFlavor::SPF_ABS case to build ABS node.
Delete the redundant recognizer of the integer ABS pattern from the DAGCombiner.
Add promoting the integer ABS node in the LegalizeIntegerType.
Expand-based legalization of integer result for the ABS nodes.
Expand-based legalization of ABS vector operations.
Add some integer abs testcases for different typesizes for Thumb arch
Add the custom ABS expanding and change the SAD pattern recognizer for X86 arch: The i64 result of the ABS is expanded to:
tmp = (SRA, Hi, 31)
Lo = (UADDO tmp, Lo)
Hi = (XOR tmp, (ADDCARRY tmp, hi, Lo:1))
Lo = (XOR tmp, Lo)
The "detectZextAbsDiff" function is changed for the recognition of pattern with the ABS node. Given a ABS node, detect the following pattern:
(ABS (SUB (ZERO_EXTEND a), (ZERO_EXTEND b))).
Change integer abs testcases for codegen with the ABS node support for AArch64.
Indicate that the ABS is legal for the i64 type when the NEON is supported.
Change the integer abs testcases to show changing of codegen.
Add combine and legalization of ABS nodes for Thumb arch.
Extend 'matchSelectPattern' to recognize the ABS patterns with ICMP_SGE condition.
For discussion, see https://bugs.llvm.org/show_bug.cgi?id=37743
Patch by: @ikulagin (Ivan Kulagin)
Differential Revision: https://reviews.llvm.org/D49837
llvm-svn: 356468
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
Vector imm setting instructions like XXLXORz/XXLXORspz/XXLXORdpz
Should behave like LI8.
We should set corresponding flags to allow rematerialization and other
opts in LICM, RA, Scheduling etc.
Differential Revision: https://reviews.llvm.org/D58645
llvm-svn: 355948
This was found when we generated COPY from G8RC to F8RC in
EmitInstrWithCustomInserter without checking proper architecture,
we silently generated mtvsrd, which require P8 and up.
This is a NFC patch to add assert when we call copyPhysReg, in case
someone accidentally generate COPY between G8RC to F8RC for P7 and
below.
llvm-svn: 355920
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
After fix all asserts found by machine verifier in PowerPC target with following patches,
we can activate machine verifier as default.
rL293769, rL348566, rL349030, rL349029, rL350113, rL350111,
rL350799, rL350165, rL355378, rL352174, rL354762, rL350115
It's also found in PR#27456, https://bugs.llvm.org/show_bug.cgi?id=27456
Differential Revision: https://reviews.llvm.org/D59011
llvm-svn: 355798
In file PPCBranchSelector.cpp we tend to over estimate code size due to large
alignment and inline assembly. Usually it causes larger computed branch offset,
it is not big problem. But sometimes it may also causes smaller computed branch
offset than actual branch offset. If the offset is close to the limit of
encoding, it may cause problem at run time.
Following is a simplified example.
actual estimated
address address
...
bne Far 100 10c
.p2align 4
Near: 110 110
...
Far: 8108 8108
Actual offset: 0x8108 - 0x100 = 0x8008
Computed offset: 0x8108 - 0x10c = 0x7ffc
The computed offset is at most ((1 << alignment) - 4) bytes smaller than actual
offset. So we add this number to the offset for safety.
Differential Revision: https://reviews.llvm.org/D57718
llvm-svn: 355529
Move the stdu instruction in the prologue and epilogue.
This should provide a small performance boost in functions that are able to do
this. I've kept this change rather conservative at the moment and functions
with frame pointers or base pointers will not try to move the stack pointer
update.
Differential Revision: https://reviews.llvm.org/D42590
llvm-svn: 355085
Summary:
Fast selection of llvm fptoi & fptrunc instructions is not handled well about
VSX instruction support.
We'd use VSX float convert integer instruction instead of non-vsx float convert
integer instruction if the operand register class is VSSRC or VSFRC because i32
and i64 are mapped to VSSRC and VSFRC correspondingly if VSX feature is
openeded.
For float trunc instruction, we do this silimar work like float convert integer
instruction to try to use VSX instruction.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D58430
llvm-svn: 354762
Fix the undefined behaviour introduced by my previous patch r353865 (left
shifting a potentially negative value), which was caught by the bots that run
UBSan.
llvm-svn: 353874
The PowerPC code generator currently scalarizes vector truncates that would fit in a vector register, resulting in vector extracts, scalar operations, and vector merges. This patch custom lowers a vector truncate that would fit in a register to a vector shuffle instead.
Differential Revision: https://reviews.llvm.org/D56507
llvm-svn: 353724
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Make copy register code as common function as following.
unsigned copyRegToRegClass(const TargetRegisterClass *ToRC, unsigned SrcReg, unsigned Flag = 0, unsigned SubReg = 0);
Differential Revision: https://reviews.llvm.org/D57368
llvm-svn: 352596
Move the CC analysis implementation to its own .cpp file instead of
duplicating it and artificually using functions in PPCISelLowering.cpp
and PPCFastISel.cpp. Follow-up to the same change done for X86, ARM, and
AArch64.
llvm-svn: 352444
For the power9 CPU, vector operations consume a pair of execution units rather
than one execution unit like a scalar operation. Update the target transform
cost functions to reflect the higher cost of vector operations when targeting
Power9.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D55461
llvm-svn: 352261
Fast selection of llvm icmp and fcmp instructions is not handled well about VSX instruction support.
We'd use VSX float comparison instruction instead of non-vsx float comparison instruction
if the operand register class is VSSRC or VSFRC because i32 and i64 are mapped to VSSRC and
VSFRC correspondingly if VSX feature is opened.
If the target does not have corresponding VSX instruction comparison for some type,
just copy VSX-related register to common float register class and use non-vsx comparison instruction.
Differential Revision: https://reviews.llvm.org/D57078
llvm-svn: 352174
This patch exploits the instructions that store a single element from a vector
to preform a (store (extract_elt)). We already have code that does this with
ISA 3.0 instructions that were added to handle i8/i16 types. However, we had
never exploited the existing ones that handle f32/f64/i32/i64 types.
Differential revision: https://reviews.llvm.org/D56175
llvm-svn: 352131
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Bad machine code: Illegal virtual register for instruction
function: TestULE
basic block: %bb.0 entry (0x1000a39b158)
instruction: %2:crrc = FCMPUD %1:vsfrc, %3:f8rc
operand 1: %1:vsfrc
Fix assert about missing match between fcmp instruction and register class.
We should use vsx related cmp instruction xvcmpudp instead of fcmpu when vsx is opened.
add -verifymachineinstrs option into related test cases to enable the verify pass.
Differential Revision: https://reviews.llvm.org/D55686
llvm-svn: 350685
When switched to the MI scheduler for P9, the hardware is modeled as out of order.
However, inside the MI Scheduler algorithm, we still use the in-order scheduling model
as the MicroOpBufferSize isn't set. The MI scheduler take it as the hw cannot buffer
the op. So, only when all the available instructions issued, the pending instruction
could be scheduled. That is not true for our P9 hw in fact.
This patch is trying to enable the Out-of-Order scheduling model. The buffer size 44 is
picked from the P9 hw spec, and the perf test indicate that, its value won't hurt the cpu2017.
With this patch, there are 3 specs improved over 3% and 1 spec deg over 3%. The detail is as follows:
x264_r: +6.95%
cactuBSSN_r: +6.94%
lbm_r: +4.11%
xz_r: -3.85%
And the GEOMEAN for all the C/C++ spec in spec2017 is about 0.18% improved.
Reviewer: Nemanjai
Differential Revision: https://reviews.llvm.org/D55810
llvm-svn: 350285
PPCPreEmitPeephole pass.
PPCPreEmitPeephole will convert a BC to B when the conditional branch is
based on a constant CR by CRSET or CRUNSET. This is added in
https://reviews.llvm.org/rL343100.
When the conditional branch is known to be always taken, all branches will
be removed and a new unconditional branch will be inserted. However, when
SeenUse is false the original patch will not remove the branches, but still
insert the new unconditional branch, update the successors and create
inconsistent IR. Compiling the synthetic testcase included can show the
problem we run into.
The patch simply removes the SeenUse condition when adding branches into
InstrsToErase set.
Differential Revision: https://reviews.llvm.org/D56041
llvm-svn: 350223
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
We have some unfortunate code in the back end that defines a bunch of register
sets for the Asm Parser. Every time another class is needed in the parser, we
have to add another one of those definitions with explicit lists of registers.
This NFC patch simply provides macros to use to condense that code a little bit.
Differential revision: https://reviews.llvm.org/D54433
llvm-svn: 350156
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
The current CRBIT spill pseudo-op expansion creates a KILL instruction
that kills the CRBIT and defines the enclosing CR field. However, this
paints a false picture to the register allocator that all bits in the CR
field are killed so copies of other bits out of the field become dead and
removable.
This changes the expansion to preserve the KILL flag on the CRBIT as an
implicit use and to treat the CR field as an undef input.
Thanks to Hal Finkel for the review and Uli Weigand for implementation input.
Differential revision: https://reviews.llvm.org/D55996
llvm-svn: 350153
This is the last one in a series of patches to support better code generation for bitfield insert.
BitPermutationSelector already support ISD::ZERO_EXTEND but not TRUNCATE.
This patch adds support for ISD:TRUNCATE in BitPermutationSelector.
For example of this test case,
struct s64b {
int a:4;
int b:16;
int c:24;
};
void bitfieldinsert64b(struct s64b *p, unsigned char v) {
p->b = v;
}
the selection DAG loos like:
t14: i32,ch = load<(load 4 from %ir.0)> t0, t2, undef:i64
t18: i32 = and t14, Constant:i32<-1048561>
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t22: i64 = AssertZext t4, ValueType:ch:i8
t23: i32 = truncate t22
t16: i32 = shl nuw nsw t23, Constant:i32<4>
t19: i32 = or t18, t16
t20: ch = store<(store 4 into %ir.0)> t14:1, t19, t2, undef:i64
By handling truncate in the BitPermutationSelector, we can use information from AssertZext when selecting t19 and skip the mask operation corresponding to t18.
So the generated sequences with and without this patch are
without this patch
rlwinm 5, 5, 0, 28, 11 # corresponding to t18
rlwimi 5, 4, 4, 20, 27
with this patch
rlwimi 5, 4, 4, 12, 27
Differential Revision: https://reviews.llvm.org/D49076
llvm-svn: 350118
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
Summary:
PowerPC has scalar selects (isel) and vector mask selects (xxsel). But PowerPC
does not have vector CR selects, PowerPC does not support scalar condition
selects on vectors.
In addition to implementing this hook, isSelectSupported() should return false
when the SelectSupportKind is ScalarCondVectorVal, so that predictable selects
are converted into branch sequences.
Reviewed By: steven.zhang, hfinkel
Differential Revision: https://reviews.llvm.org/D55754
llvm-svn: 349727
For type v4i32/v8ii16/v16i8, do following transforms:
(vselect (setcc a, b, setugt), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setuge), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setult), (sub b, a), (sub a, b)) -> (vabsd a, b)
(vselect (setcc a, b, setule), (sub b, a), (sub a, b)) -> (vabsd a, b)
Differential Revision: https://reviews.llvm.org/D55812
llvm-svn: 349599
Improve the current vec_abs support on P9, generate ISD::ABS node for vector types,
combine ABS node to VABSD node for some special cases to make use of P9 VABSD* insns,
do custom lowering to vsub(vneg later)+vmax if it has no combination opportunity.
Differential Revision: https://reviews.llvm.org/D54783
llvm-svn: 349437
We keep a few iterators into the basic block we're selecting while
performing FastISel. Usually this is fine, but occasionally code wants
to remove already-emitted instructions. When this happens we have to be
careful to update those iterators so they're not pointint at dangling
memory.
llvm-svn: 349365
There are several Pseudo in PowerPC backend.
eg:
* ISel Pseudo-instructions , which has let usesCustomInserter=1 in td
ExpandISelPseudos -> EmitInstrWithCustomInserter will deal with them.
* Post-RA pseudo instruction, which has let isPseudo = 1 in td, or Standard pseudo (SUBREG_TO_REG,COPY etc.)
ExpandPostRAPseudos -> expandPostRAPseudo will expand them
* Multi-instruction pseudo operations will expand them PPCAsmPrinter::EmitInstruction
* Pseudo instruction in CodeEmitter, which has encoding of 0.
Currently, in td files, especially PPCInstrVSX.td,
we did not distinguish Post-RA pseudo instruction and Pseudo instruction in CodeEmitter very clearly.
This patch is to
* Rename Pseudo<> class to PPCEmitTimePseudo, which means encoding of 0 in CodeEmitter
* Introduce new class PPCPostRAExpPseudo <> for previous PostRA Pseudo
* Introduce new class PPCCustomInserterPseudo <> for previous Isel Pseudo
Differential Revision: https://reviews.llvm.org/D55143
llvm-svn: 349044
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
Fix assert about using an undefined physical register in machine instruction verify pass.
The reason is that register flag undef is missing when doing transformation from If Conversion Pass.
```
Bad machine code: Using an undefined physical register
- function: func_65
- basic block: %bb.0 entry (0x10024740738)
- instruction: BCLR killed $cr5lt, implicit $lr8, implicit $rm, implicit undef $x3
- operand 0: killed $cr5lt
LLVM ERROR: Found 1 machine code errors.
```
There are also other existing testcases with same issue. So I add -verify-machineinstrs option to open verifying.
Differential Revision: https://reviews.llvm.org/D55408
llvm-svn: 348566
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 348109
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
Summary:
A signed comparison of i1 values produces the opposite result to an unsigned one if the condition code
includes less-than or greater-than. This is so because 1 is the most negative signed i1 number and the
most positive unsigned i1 number. The CR-logical operations used for such comparisons are non-commutative
so for signed comparisons vs. unsigned ones, the input operands just need to be swapped.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54825
llvm-svn: 347831
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
This reverts commits r347532. Forget add the option
-mtriple powerpc64-unknown-linux-gnu. So other platform is error except
for PowerPC.
llvm-svn: 347534
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 347532
This is further cleanup for PPCMCCodeEmitter. The class had been contained
within the cpp file alone. Now it has been split up between a header file and
a cpp file which allows other classes to make use of the functions in this class
if required.
llvm-svn: 347428
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
This patch is for STWU/STWUX (IIC_LdStStoreUpd ) for P8.
Since there are already multiple IIC for store update, this patch also merge
IIC_LdStSTDU/IIC_LdStStoreUpd to IIC_LdStSTU
IIC_LdStSTDUX to IIC_LdStSTUX
and we add a new testcase in https://reviews.llvm.org/D54699 to show the difference.
Differential Revision: https://reviews.llvm.org/D54700
llvm-svn: 347311
Turns out that there was no check for a store that truncates down
to a single byte when combining a (store (bswap...)) into a byte-swapping
store. This patch just adds that check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39478.
llvm-svn: 347288
To make ISD::VSELECT available(legal) so long as there are altivec instruction, otherwise it's default behavior is expanding,
which is legalized at type-legalization phase. Use xxsel to match vselect if vsx is open, or use vsel.
Differential Revision: https://reviews.llvm.org/D49531
llvm-svn: 346824
Currently in llvm, CalleeSavedInfo can only assign a callee saved register to
stack frame index to be spilled in the prologue. We would like to enable
spilling gprs to vector registers. This patch adds the capability to spill to
other registers aside from just the stack. It also adds the changes for power9
to spill gprs to volatile vector registers when they are available.
This happens only for leaf functions when using the option
-ppc-enable-pe-vector-spills.
Differential Revision: https://reviews.llvm.org/D39386
llvm-svn: 346512
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
Change the type in a couple of lists and sets that only store physical
registers from unsigned to MCPhysRegs. The later is only 16bits and
saves us a bit of memory.
llvm-svn: 346254
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
On Power9, we don't have patterns to select the following intrinsics:
llvm.ppc.vsx.stxvw4x.be
llvm.ppc.vsx.stxvd2x.be
This patch adds support for these.
Differential Revision: https://reviews.llvm.org/D53581
llvm-svn: 346148
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
llvm-svn: 345705
Currently, for this node:
vector int test(int a, int b, int c, int d) {
return (vector int) { a, b, c, d };
}
we get this on Power9:
mtvsrdd 34, 5, 3
mtvsrdd 35, 6, 4
vmrgow 2, 3, 2
and this on Power8:
mtvsrwz 0, 3
mtvsrwz 1, 5
mtvsrwz 2, 4
mtvsrwz 3, 6
xxmrghd 34, 1, 0
xxmrghd 35, 3, 2
vmrgow 2, 3, 2
This can be improved to this on LE Power9:
rldimi 3, 4, 32, 0
rldimi 5, 6, 32, 0
mtvsrdd 34, 5, 3
and this on LE Power8
rldimi 3, 4, 32, 0
rldimi 5, 6, 32, 0
mtvsrd 34, 3
mtvsrd 35, 5
xxpermdi 34, 35, 34, 0
This patch updates the TD pattern to generate the optimized sequence for both
Power8 and Power9 on LE and BE.
Differential Revision: https://reviews.llvm.org/D53494
llvm-svn: 345414
For both operands are bool, short, int, long, long long, add the following optimization.
1. 0-x == y --> x+y ==0
2. 0-x != y --> x+y != 0
Review: nemanjai
Differential Revision: https://reviews.llvm.org/D53360
llvm-svn: 345366
At present a v2i16 -> v2f64 convert is implemented by extracts to scalar,
scalar converts, and merge back into a vector. Use vector converts instead,
with the int data permuted into the proper position and extended if necessary.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D53346
llvm-svn: 345361
Add support to allow bit-casting from f128 to i128 and then
extracting 64 bits from the result.
Differential Revision: https://reviews.llvm.org/D49507
llvm-svn: 345053
The D-Form VSX loads introduced in ISA 3.0 are not direct D-Form equivalent of
the corresponding X-Forms since they only target the Altivec registers.
Namely LXSSPX can load into any of the 64 VSX registers whereas LXSSP can only
load into the upper 32 VSX registers. Similarly with the remaining affected
instructions.
There is currently no way that I can see to trigger the bug, but as we add other
ways of exploiting these instructions, there may very well be instances that do.
This is an NFC patch in practical terms since the changes it introduces can not
be triggered without an MIR test.
Differential revision: https://reviews.llvm.org/D53323
llvm-svn: 344894
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
llvm-svn: 344472
The current BitPermutationSelector generates a code to build a value by tracking two types of bits: ConstZero and Variable.
ConstZero means a bit we need to mask off and Variable is a bit we copy from an input value.
This patch add third type of bits VariableKnownToBeZero caused by AssertZext node or zero-extending load node.
VariableKnownToBeZero means a bit comes from an input value, but it is known to be already zero. So we do not need to mask them.
VariableKnownToBeZero enhances flexibility to group bits, since we can avoid redundant masking for these bits.
This patch also renames "HasZero" to "NeedMask" since now we may skip masking even when we have zeros (of type VariableKnownToBeZero).
Differential Revision: https://reviews.llvm.org/D48025
llvm-svn: 344347
For ISD::SIGN_EXTEND_INREG operation of v2i16 and v2i8 types will cause assert because they are registered as custom operation.
So that the type legalization phase will enter the custom hook, which do not handle ISD::SIGN_EXTEND_INREG operation and fall throw into unreachable assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52449
llvm-svn: 344109
This is the PPC-specific non-controversial part of
https://reviews.llvm.org/D44548 that simply enables this combine for PPC
since PPC has these instructions.
This commit will allow the target-independent portion to be truly target
independent.
llvm-svn: 344077
There are occasionally instances where AADB rewrites registers in such a way
that a reg-reg copy becomes a self-copy. Such an instruction is obviously
redundant and can be removed. This patch does precisely that.
Note that this will not remove various nop's that we insert (which are
themselves just self-copies). The reason those are left alone is that all of
them have their own opcodes (that just encode to a self-copy).
What prompted this patch is the fact that these self-copies sometimes end up
using registers that make the instruction a priority-setting nop, thereby
having a significant effect on performance.
Differential revision: https://reviews.llvm.org/D52432
llvm-svn: 344036
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
Going from XForm Load to DSForm Load requires that the immediate be 4 byte
aligned.
If we are not aligned we must leave the load as LDX (XForm).
This bug is causing a compile-time failure in the benchmark h264ref.
Differential Revision: https://reviews.llvm.org/D51988
llvm-svn: 343525
We have an unfortunate situation in our back end where we have to keep pairs of
functions synchronized. Needless to say that this is not an ideal situation as
it is very difficult to enforce. Even without bugs, it's annoying to have to do
the same thing in two places.
This patch just refactors the code so that the two pairs of those functions that
pertain to printing register operands are unified:
- stripRegisterPrefix() - this just removes the letter prefixes from registers
for the InstrPrinter and AsmPrinter. This patch provides this as a static
member of PPCRegisterInfo
- Handling of PPCII::UseVSXReg - there are 3 places where we do something
special for instructions with that flag set. Each of those places does its
own checking of this flag and implements code customization. Any changes to
how we print/encode VSX/VMX registers require modifying all 3 places. This
patch unifies this into a static function in PPCInstrInfo that returns the
register number adjusted as needed.
Differential revision: https://reviews.llvm.org/D52467
llvm-svn: 343195
Dmitri Gribenko