The range should be assumed to be the hardware maximum
if a workitem intrinsic is used in a callable function
which does not know the restricted limit of the calling
kernel.
llvm-svn: 316346
combineShuffleOfScalars is very conservative about shuffled BUILD_VECTORs that can be combined together.
This patch adds one additional case - if both BUILD_VECTORs represent splats of the same scalar value but with different UNDEF elements, then we should create a single splat BUILD_VECTOR, sharing only the UNDEF elements defined by the shuffle mask.
Differential Revision: https://reviews.llvm.org/D38696
llvm-svn: 316331
Before, loop unrolling was only enabled for loops with a single
block. This restriction has been removed and replaced by:
- allow a maximum of two exiting blocks,
- a four basic block limit for cores with a branch predictor.
Differential Revision: https://reviews.llvm.org/D38952
llvm-svn: 316313
Summary:
It's unclear if this is the only thing we can do but at least this is consistent with the check
of address space agreement in `isBitCastable`.
The code is used at least in both instcombine and jumpthreading though
I could only find a way to trigger the invalid cast in instcombine.
Reviewers: loladiro, sanjoy, majnemer
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34335
llvm-svn: 316302
As discussed in D39011:
https://reviews.llvm.org/D39011
...replacing constants with a variable is inverting the transform done
by other IR passes, so we definitely don't want to do this early.
In fact, it's questionable whether this transform belongs in SimplifyCFG
at all. I'll look at moving this to codegen as a follow-up step.
llvm-svn: 316298
This fixes bugzilla 26810
https://bugs.llvm.org/show_bug.cgi?id=26810
This is intended to prevent sequences like:
movl %ebp, 8(%esp) # 4-byte Spill
movl %ecx, %ebp
movl %ebx, %ecx
movl %edi, %ebx
movl %edx, %edi
cltd
idivl %esi
movl %edi, %edx
movl %ebx, %edi
movl %ecx, %ebx
movl %ebp, %ecx
movl 16(%esp), %ebp # 4 - byte Reload
Such sequences are created in 2 scenarios:
Scenario #1:
vreg0 is evicted from physreg0 by vreg1
Evictee vreg0 is intended for region splitting with split candidate physreg0 (the reg vreg0 was evicted from)
Region splitting creates a local interval because of interference with the evictor vreg1 (normally region spliiting creates 2 interval, the "by reg" and "by stack" intervals. Local interval created when interference occurs.)
one of the split intervals ends up evicting vreg2 from physreg1
Evictee vreg2 is intended for region splitting with split candidate physreg1
one of the split intervals ends up evicting vreg3 from physreg2 etc.. until someone spills
Scenario #2
vreg0 is evicted from physreg0 by vreg1
vreg2 is evicted from physreg2 by vreg3 etc
Evictee vreg0 is intended for region splitting with split candidate physreg1
Region splitting creates a local interval because of interference with the evictor vreg1
one of the split intervals ends up evicting back original evictor vreg1 from physreg0 (the reg vreg0 was evicted from)
Another evictee vreg2 is intended for region splitting with split candidate physreg1
one of the split intervals ends up evicting vreg3 from physreg2 etc.. until someone spills
As compile time was a concern, I've added a flag to control weather we do cost calculations for local intervals we expect to be created (it's on by default for X86 target, off for the rest).
Differential Revision: https://reviews.llvm.org/D35816
Change-Id: Id9411ff7bbb845463d289ba2ae97737a1ee7cc39
llvm-svn: 316295
The missed canonicalization/optimization in the motivating test from PR34471 leads to very different codegen:
int switcher(int x) {
switch(x) {
case 17: return 17;
case 19: return 19;
case 42: return 42;
default: break;
}
return 0;
}
int comparator(int x) {
if (x == 17) return 17;
if (x == 19) return 19;
if (x == 42) return 42;
return 0;
}
For the first example, we use a bit-test optimization to avoid a series of compare-and-branch:
https://godbolt.org/g/BivDsw
Differential Revision: https://reviews.llvm.org/D39011
llvm-svn: 316293
This patch implements dynamic stack (re-)alignment for 16-bit Thumb. When
targeting processors, which support only the 16-bit Thumb instruction set
the compiler ignores the alignment attributes of automatic variables and may
silently generate incorrect code.
Differential revision: https://reviews.llvm.org/D38143
llvm-svn: 316289
The pass scans the function to find instruction chains that define
registers in the same domain (closures).
It then calculates the cost of converting the closure to another domain.
If found profitable, the instructions are converted to instructions in
the other domain and the register classes are changed accordingly.
This commit adds the pass infrastructure and a simple conversion from
the GPR domain to the Mask domain.
Differential Revision:
https://reviews.llvm.org/D37251
Change-Id: Ic2cf1d76598110401168326d411128ae2580a604
llvm-svn: 316288
This introduces a new operand type to encode the whether the index register should be XMM/YMM/ZMM. And new code to fixup the results created by readSIB.
This has the nice effect of removing a bunch of code that hard coded the name of every GATHER and SCATTER instruction to map the index type.
This fixes PR32807.
llvm-svn: 316273
The way that splitInnerLoopHeader splits blocks requires that
the induction PHI will be the first PHI in the inner loop
header. This makes sure that is actually the case when there
are both IV and reduction phis.
Differential Revision: https://reviews.llvm.org/D38682
llvm-svn: 316261
Summary: __multi3 is not available on x86 (32-bit). Setting lib call name for MULI_128 to nullptr forces DAGTypeLegalizer::ExpandIntRes_MUL to generate instructions for 128-bit multiply instead of a call to an undefined function. This fixes PR20871 though it may be worth looking at why licm and indvars combine to generate 65-bit multiplies in that test.
Patch by Riyaz V Puthiyapurayil
Reviewers: craig.topper, schweitz
Reviewed By: craig.topper, schweitz
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D38668
llvm-svn: 316254
This was suggested in PR35003:
https://bugs.llvm.org/show_bug.cgi?id=35003
32-bit checks may be identical to 64-bit (if we avoid those pesky scalar params!).
I'll check in the script change shortly assuming this doesn't anger any bots.
llvm-svn: 316223
Summary:
This change comes from using lld for i686-windows-msvc. Before this change, lld
emits an error of:
error: relocation against symbol in discarded section: .xdata
It's possible that this could be addressed in lld, but I think this change is
reasonable on its own.
At a high level, this is being generated:
A (.text comdat) -> B (.text) -> C (.xdata comdat)
Where A is a C++ inline function, which references B, an exception handler
thunk, which references C, the exception handling info.
With this structure, lld will error when applying relocations to B if the C it
references has been discarded (some other C has been selected).
This change checks if A is comdat, and if so places the exception registration
thunk (B) in the comdata group of A (and B).
It appears that MSVC makes the __ehhandler function comdat.
Is it possible that duplicate thunks are being emitted into the final binary
with other linkers, or are they stripping the unused thunks?
Reviewers: rnk, majnemer, compnerd, smeenai
Reviewed By: rnk, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38940
llvm-svn: 316219
Normally, if the registers holding the induction variable's bounds
are redefined inside of the loop's body, the loop cannot be converted
to a hardware loop. However, if the redefining instruction is actually
loading an immediate value into the register, this conversion is both
possible and legal (since the immediate itself will be used in the
loop setup in the preheader).
llvm-svn: 316218
(recommit #2 after checking for timeout issue).
The original patch was an improvement to IR ValueTracking on
non-negative integers. It has been checked in to trunk (D18777,
r284022). But was disabled by default due to performance regressions.
Perf impact has improved. The patch would be enabled by default.
Reviewers: reames, hfinkel
Differential Revision: https://reviews.llvm.org/D34101
Patch by: Olga Chupina <olga.chupina@intel.com>
llvm-svn: 316208
This test checks that load from constant memory will be sunk regardless of
aliasing stores in the loop.
Patch by Daniil Suchkov!
Differential Revision: https://reviews.llvm.org/D39113
llvm-svn: 316207
The commit at https://reviews.llvm.org/rL315888 is causing some failures
with internal testing. Disabling this code until we can resolve the issues.
llvm-svn: 316199
This adds the minimum necessary to support codegen for simple ALU operations
on RV32. Prolog and epilog insertion, support for memory operations etc etc
follow in future patches.
Leave guessInstructionProperties=1 until https://reviews.llvm.org/D37065 is
reviewed and lands.
Differential Revision: https://reviews.llvm.org/D29933
llvm-svn: 316188
x86 has its own copy of integer absolute pattern matching to combine directly to a SUB+CMOV.
This patch removes the x86 combine and adds custom lowering support for ISD::ABS instead, allowing us to use the DAGCombiner version.
Additional test cases are already covered by iabs.ll (rL315706 and rL315711).
Differential Revision: https://reviews.llvm.org/D38895
llvm-svn: 316162
This runs `udpate_mir_test_checks --add-vreg-checks` on the tests taht
are already more or less in the format that generates, so that there
will be less churn in some upcoming changes.
llvm-svn: 316139
This converts a large and somewhat arbitrary set of tests to use
update_mir_test_checks. I ran the script on all of the tests I expect
to need to modify for an upcoming mir syntax change and kept the ones
that obviously didn't change the tests in ways that might make it
harder to understand.
llvm-svn: 316137
llvm-cov tends to highlight too many regions because its policy is to
highlight all region entry segments. This can look confusing to users:
not all region entry segments are interesting and deserve highlighting.
Emitting these highlights only when the region count differs from the
line count is a more user-friendly policy.
llvm-svn: 316109
llvm-cov typically doesn't highlight gap segments, but it should if the
gap occurs after an uncovered region in order to preserve continuity.
llvm-svn: 316107
This patch lets the llvm tools handle the new HVX target features that
are added by frontend (clang). The target-features are of the form
"hvx-length64b" for 64 Byte HVX mode, "hvx-length128b" for 128 Byte mode HVX.
"hvx-double" is an alias to "hvx-length128b" and is soon will be deprecated.
The hvx version target feature is upgated form "+hvx" to "+hvxv{version_number}.
Eg: "+hvxv62"
For the correct HVX code generation, the user must use the following
target features.
For 64B mode: "+hvxv62" "+hvx-length64b"
For 128B mode: "+hvxv62" "+hvx-length128b"
Clang picks a default length if none is specified. If for some reason,
no hvx-length is specified to llvm, the compilation will bail out.
There is a corresponding clang patch.
Differential Revision: https://reviews.llvm.org/D38851
llvm-svn: 316101
r315275 set the IsLittleEndian parameter incorrectly. This patch corrects
this, and adds a test to ensure such mistakes will be caught in the future.
llvm-svn: 316091
Fix a couple of tests that were extending the wrong vreg, and
regenerate their checks with update_mir_test_checks. This looks like
it was a copy-paste or test update error.
llvm-svn: 316087
In the case where there was a conditional branch followed by a unconditional
branch with debug instruction separating them, MipsInstrInfo::analyzeBranch
would not skip past debug instruction when searching for the second branch
which give erroneous results about the control flow of the block.
This could lead to the branch folder to merge the non-fall through case
into it's predecessor, leaving the conditional branch with a dangling
basic block operand.
This resolves PR34975.
Thanks to Alexander Richardson for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39003
llvm-svn: 316084
bug fix 316067 https://bugs.llvm.org/show_bug.cgi?id=34978
This test checks that the x86-interleaved ends without any
assertion.
Change-Id: I1e970482a4d0404516cbc85517fc091bb21c35a8
llvm-svn: 316080
This patch adds accurate instructions cost.
The formula presents two cases(stride 3 and stride 4) and calculates the cost according to the VF and stride.
Reviewers:
1. delena
2. Farhana
3. zvi
4. dorit
5. Ayal
Differential Revision: https://reviews.llvm.org/D38762
Change-Id: If4cfbd4ac0e63694e8144cb78c7fa34850647ff7
llvm-svn: 316072
Helper functions to identify sign- and zero-extending machine instruction is introduced in rL315888.
This patch makes PPCInstrInfo::optimizeCompareInstr use the helper functions. It simplifies the code and also makes possible more optimizations since the helper can do more analysis than the original check code; I observed about 5000 more compare instructions are eliminated while building LLVM.
Also, this patch fixes a bug in helpers on ANDIo instruction handling due to the order of checks. This bug causes a failure in an existing test case for optimizeCompareInstr.
Differential Revision: https://reviews.llvm.org/D38988
llvm-svn: 316071
Summary:
When we have the following case:
%cond = cmp iN %x, CmpConst
%tr = trunc iN %x to iK
%narrowsel = select i1 %cond, iK %t, iK C
We could possibly match only min/max pattern after looking through cast.
So it is more profitable if widened C constant will be equal CmpConst.
That is why just set widened C constant equal to CmpConst, because there
is a further check in this function that trunc CmpConst == C.
Also description for lookTroughCast function was added.
Reviewers: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38536
Patch by: Artur Gainullin <artur.gainullin@intel.com>
llvm-svn: 316070
Summary:
If a compare instruction is same or inverse of the compare in the
branch of the loop latch, then return a constant evolution node.
Currently scope of evaluation is limited to SCEV computation for
PHI nodes.
This shall facilitate computations of loop exit counts in cases
where compare appears in the evolution chain of induction variables.
Will fix PR 34538
Reviewers: sanjoy, hfinkel, junryoungju
Reviewed By: junryoungju
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D38494
llvm-svn: 316054
When more than one Module is imported into the same context, such as during
an LTO build before linking the modules, ODR type uniquing may cause types
to point to a different CU. This check does not make sense in this case.
This fixes the error reported in PR34944.
https://bugs.llvm.org/show_bug.cgi?id=34944
rdar://problem/34940685
This reapplies a cleaner implementation of r316049.
llvm-svn: 316052
When more than one Module is imported into the same context, such as during
an LTO build before linking the modules, ODR type uniquing may cause types
to point to a different CU. This check does not make sense in this case.
This fixes the error reported in PR34944.
https://bugs.llvm.org/show_bug.cgi?id=34944
rdar://problem/34940685
llvm-svn: 316049
If the address of a local is used in a comparison, AArch64 can fold the
address-calculation into the comparison via "adds". Unfortunately, a couple of
places (both hit in this one test) are not ready to deal with that yet and just
assume the first source operand is a register.
llvm-svn: 316035
NFC.
Added the Broadwell cpu and the BROADWELL prefix to all the scheduling regression tests, as part of prepartion for a larger commit of adding all Broadwell scheduiling.
Reviewers: RKSimon, zvi, aaboud
Differential Revision: https://reviews.llvm.org/D38994
Change-Id: I54bc9065168844c107b1729fcdc1d311ce3ea0a9
llvm-svn: 315998
Summary:
ValueTracking was recognizing not all variations of clamp. Swapping of
true value and false value of select was added to fix this problem. This
change breaks the canonical form of cmp inside the matchMinMax function,
that is why additional checks for compare predicates is needed. Added
corresponding test cases.
Reviewers: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38531
Patch by: Artur Gainullin <artur.gainullin@intel.com>
llvm-svn: 315992
Summary:
It seems that negative offset was accidentally allowed in D17967.
AFAICT small negative offset should be valid (always raise segfault) on all archs that I'm aware of (especially x86, which is the only one with this optimization enabled) and such case can be useful when loading hiden metadata from an object.
However, like the positive side, it should only be done within a certain limit.
For now, use the same limit on the positive side for the negative side.
A separate option can be added if needs appear.
Reviewers: mcrosier, skatkov
Reviewed By: skatkov
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D38925
llvm-svn: 315991
Updated the scheduling information for the SkylakeClient target with the following changes:
1. regrouped the instructions after adding load and store latencies.
2. regrouped the instructions after adding identified missing ports in several groups.
The changes were made after revisiting the latencies impact of all the load and store uOps.
Reviewers: zvi, RKSimon, craig.topper
Differential Revision: https://reviews.llvm.org/D38727
Change-Id: I778a308cc11e490e8fa5e27e2047412a1dca029f
llvm-svn: 315978
This patch reverts rL315440 because of the bug described at
https://bugs.llvm.org/show_bug.cgi?id=34937
The fix for the bug is on review as D38944, but not yet ready. Given this is a regression reverting until a fix is ready is called for.
Max would have done the revert himself, but is having trouble doing a build of fresh LLVM for some reason. I did the build and test to ensure the revert worked as expected on his behalf.
llvm-svn: 315974
We want to be writing a 32bit value, so we should be writing 4 bytes
instead of 2.
Patch by Alex Langford <apl@fb.com>.
Differential Revision: https://reviews.llvm.org/D38872
llvm-svn: 315964
In r315960, I accidentally assumed that the first line segment is
guaranteed to be the non-gap region entry segment (given that one is
present). It can actually be any segment on the line, and the test I
checked in demonstrates that.
llvm-svn: 315963
Gap areas make it possible to correctly determine when to use counts
from deferred regions. Before gap areas were introduced, llvm-cov needed
to use a heuristic to do this: it ignored counts from segments that
start, but do not end, on a line. This heuristic breaks down on a simple
example (see PR34962).
This patch removes the heuristic and picks counts from any region entry
segment which isn't a gap area.
llvm-svn: 315960
This reverts commit r315823, thus re-applying r315781.
Also make sure we don't use G_BITCAST mapping for non-generic registers.
Non-generic registers don't have a type but do have a reg bank.
Something the COPY mapping now how to deal with but the G_BITCAST
mapping don't.
-- Original Commit Message --
We use to resort on the generic implementation to get the mappings for
COPYs. The generic implementation resorts on table lookup and
dynamically allocated objects to get the valid mappings.
Given we already know how to map G_BITCAST and have the static mappings
for them, use that code path for COPY as well. This is much more
efficient.
Improve the compile time of RegBankSelect by up to 20%.
Note: When we eventually generate all the mappings via TableGen, we
wouldn't have to do that dance to shave compile time. The intent of this
change was to make sure that moving to static structure really pays off.
NFC.
llvm-svn: 315947
This patch adds a new kind of metadata that indicates the possible callees of
indirect calls.
Differential Revision: https://reviews.llvm.org/D37354
llvm-svn: 315944
This will prevent doubling of line endings when parsing assembly and
emitting assembly.
Otherwise we'd parse the directive, consume the end of statement, hit
the next end of statement, and emit a fresh newline.
llvm-svn: 315943
static __global int Var = 0;
__global int* Ptr[] = {&Var};
...
In this case Var is a non premptable symbol and so its address can be used as the value of Ptr, with a base relative relocation that will add the delta between the ELF address and the actual load address. Such relocations do not require a symbol.
Differential Revision: https://reviews.llvm.org/D38909
llvm-svn: 315935
above PHI instructions.
ARC optimizer has an optimization that moves a call to an ObjC runtime
function above a phi instruction when the phi has a null operand and is
an argument passed to the function call. This optimization should not
kick in when the runtime function is an objc_release that releases an
object with precise lifetime semantics.
rdar://problem/34959669
llvm-svn: 315914
Previously these instructions were marked codegen only and had
an under-specified instruction description that did not record the
fcc register.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D38847
llvm-svn: 315905
Currently llvm-dwarfdump runs into llvm_unreachable when
faces DW_CFA_GNU_args_size. Patch implements the support.
Differential revision: https://reviews.llvm.org/D38879
llvm-svn: 315897
Summary:
The following transformation for cmp instruction:
icmp smin(x, PositiveValue), 0 -> icmp x, 0
should only be done after checking for min/max to prevent infinite
looping caused by a reverse canonicalization. That is why this
transformation was moved to place after the mentioned check.
Reviewers: spatel, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38934
Patch by: Artur Gainullin <artur.gainullin@intel.com>
llvm-svn: 315895
We came across an llvm bug when compiling some testcases that 64-bit
immediates are silently truncated into 32-bit and then packed into
BPF_JMP | BPF_K encoding. This caused comparison with wrong value.
This bug looks to be introduced by r308080. The Select_Ri pattern is
supposed to be lowered into J*_Ri while the latter only support 32-bit
immediate encoding, therefore Select_Ri should have similar immediate
predicate check as what J*_Ri are doing.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 315889
This patch enables redundant sign- and zero-extension elimination in PowerPC MI Peephole pass.
If the input value of a sign- or zero-extension is known to be already sign- or zero-extended, the operation is redundant and can be eliminated.
One common case is sign-extensions for a method parameter or for a method return value; they must be sign- or zero-extended as defined in PPC ELF ABI.
For example of the following simple code, two extsw instructions are generated before the invocation of int_func and before the return. With this patch, both extsw are eliminated.
void int_func(int);
void ii_test(int a) {
if (a & 1) return int_func(a);
}
Such redundant sign- or zero-extensions are quite common in many programs; e.g. I observed about 60,000 occurrences of the elimination while compiling the LLVM+CLANG.
Differential Revision: https://reviews.llvm.org/D31319
llvm-svn: 315888
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
The previous commit failed on MSVC due to a failure to convert an
initializer_list to a std::vector. Hopefully, MSVC will accept this version.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315887
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315885
Summary:
This includes some context-sensitivity in the MVT to LLT conversion so that
pointer types are tested correctly.
FIXME: I'm not happy with the way this is done since everything is a
special-case. I've yet to find a reasonable way to implement it.
select-load.mir fails because <1 x s64> loads in tablegen get priority over s64
loads. This is fixed in the next patch and as such they should be committed
together, I've posted them separately to help with the review.
Depends on D37456
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37457
llvm-svn: 315884
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Hopefully fixed the ambiguous constructor that a large number of bots reported.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315869
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315863
Summary:
This was impeding our ability to combine the extending shuffles with other shuffles as you can see from the test changes.
There's one special case that needed to be added to use VZEXT directly for v8i8->v8i64 since the custom lowering requires v64i8.
Reviewers: RKSimon, zvi, delena
Reviewed By: delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38714
llvm-svn: 315860
This can result in significant code size savings in some cases,
e.g. an interrupt table all filled with the same assembly stub
in a certain Cortex-M BSP results in code blowup by a factor of 2.5.
Differential Revision: https://reviews.llvm.org/D34806
llvm-svn: 315853
This reduces code size for constructs like vtables or interrupt
tables that refer to functions in global initializers.
Differential Revision: https://reviews.llvm.org/D34805
llvm-svn: 315852
Summary:
It's better to use our shuffle lowering code to handle these than loading an immediate into a k-register.
It really feels like this should be a DAG combine optimization rather than a lowering operation, but that's a problem for another day.
Reviewers: RKSimon, delena, zvi
Reviewed By: delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38932
llvm-svn: 315849
We should be able to fold constant conditions by converting to shuffles, but fixing that would break these tests in their current form. Since they are really trying to test masking ops, add a non-constant mask to the selects.
llvm-svn: 315848
- Do not allow amd_amdgpu_isa directives on non-amdgcn architectures
- Do not allow amd_amdgpu_hsa_metadata on non-amdhsa OSes
- Do not allow amd_amdgpu_pal_metadata on non-amdpal OSes
Differential Revision: https://reviews.llvm.org/D38750
llvm-svn: 315812
- Emit NT_AMD_AMDGPU_ISA
- Add assembler parsing for isa version directive
- If isa version directive does not match command line arguments, then return error
Differential Revision: https://reviews.llvm.org/D38748
llvm-svn: 315808
If we are applying a byte mask to a value extracted from a shuffle, see if we can combine the mask into shuffle.
Fixes the last issue with PR22415
llvm-svn: 315807
Currently llvm assembler emits parsing error for valid IR assembly
alloca i32, i32 9, addrspace(5)
when alloca addr space is 5.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D38713
llvm-svn: 315791
Summary:
Operand variable lookups are now performed by the RuleMatcher rather than
searching the whole matcher hierarchy for a match. This revealed a wrong-code
bug that currently affects ARM and X86 where patterns that use a variable more
than once in the match pattern will be imported but won't check that the
operands are identical. This can cause the tablegen-erated matcher to
accept matches that should be rejected.
Depends on D36569
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: aemerson, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36618
llvm-svn: 315780
This is particularly important for AVX512VL where we are better able to recognize the VBROADCAST loads to fold with other operations.
For AVX512VL we now use X86ISD::VBROADCAST for all of the patterns and remove the 128-bit X86ISD::VMOVDDUP.
We may be able to use this for AVX1 as well which would allow us to remove more isel patterns.
I also had to add X86ISD::VBROADCAST as a node to call combineShuffle for so that we treat it similar to X86ISD::MOVDDUP.
Differential Revision: https://reviews.llvm.org/D38836
llvm-svn: 315768
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
It is possible for both a base and a derived class to be satisfied
with a unique vtable. If a program contains casts of the same pointer
to both of those types, the CFI checks will be lowered to this
(with ThinLTO):
if (p != &__typeid_base_global_addr)
trap();
if (p != &__typeid_derived_global_addr)
trap();
The optimizer may then use the first condition combined
with the assumption that __typeid_base_global_addr and
__typeid_derived_global_addr may not alias to optimize away the second
comparison, resulting in an unconditional trap.
This patch fixes the bug by giving imported globals the type [0 x i8]*,
which prevents the optimizer from assuming that they do not alias.
Differential Revision: https://reviews.llvm.org/D38873
llvm-svn: 315753
Each constant extender requires an extra instruction, which adds to the
code size and also reduces the number of available slots in an instruction
packet. In most cases, the value of a repeated constant extender could be
loaded into a register, and the instructions using the extender could be
replaced with their counterparts that use that register instead.
This patch adds a pass that tries to reduce the number of constant
extenders, including extenders which differ only in an immediate offset
known at compile time, e.g. @global and @global+12.
llvm-svn: 315735
This adds Intel's Knights Mill CPU to valid CPU names for the backend. For now its an alias of "knl", but ultimately we need to support AVX5124FMAPS and AVX5124VNNIW instruction sets for it.
Differential Revision: https://reviews.llvm.org/D38811
llvm-svn: 315722
Summary: This version of tests should be working properly.
Reviewers: vsk
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D38889
llvm-svn: 315714
Summary:
In RS4GC it is possible that a base pointer is contained in a vector that
has undergone a bitcast from one element-pointertype to another. We teach
RS4GC how to look through bitcasts of vector types when looking for a base
pointer.
Reviewers: anna
Reviewed By: anna
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38849
llvm-svn: 315694
Summary:
Documentation says that user can specify sources for both "show" and
"report" commands. "Show" command respects specified sources, but "report" does
not. It is useful to have both "show" and "report" generated for specified
sources. Also added tests to for both commands with sources specified.
Reviewers: vsk, kcc
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D38860
llvm-svn: 315685
This patch adds timestamp verification for swiftmodule files. A new flag
is provided to allows us to disable this check in order to allow testing
of this feature.
Differential revision: https://reviews.llvm.org/D38686
llvm-svn: 315684
Summary:
This patch teaches SCEV to calculate the maxBECount when the end bound
of the loop can vary. Note that we cannot calculate the exactBECount.
This will only be done when both conditions are satisfied:
1. the loop termination condition is strictly LT.
2. the IV is proven to not overflow.
This provides more information to users of SCEV and can be used to
improve identification of finite loops.
Reviewers: sanjoy, mkazantsev, silviu.baranga, atrick
Reviewed by: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38825
llvm-svn: 315683
Significantly reduces performancei (~30%) of gipfeli
(https://github.com/google/gipfeli)
I have not yet managed to reproduce this regression with the open-source
version of the benchmark on github, but will work with others to get a
reproducer to you later today.
llvm-svn: 315680
There's no advantage to using these instructions when they aren't masked. This enables some additional execution domain switching without needing to update the table.
llvm-svn: 315674
Summary:
This patch adds processing of binary operations when the def of operands are in
the same block (i.e. local processing).
Earlier we bailed out in such cases (the bail out was introduced in rL252032)
because LVI at that time was more precise about context at the end of basic
blocks, which implied local def and use analysis didn't benefit CVP.
Since then we've added support for LVI in presence of assumes and guards. The
test cases added show how local def processing in CVP helps adding more
information to the ashr, sdiv, srem and add operators.
Note: processCmp which suffers from the same problem will
be handled in a later patch.
Reviewers: philip, apilipenko, SjoerdMeijer, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38766
llvm-svn: 315634
This is a follow up for the loop predication change 313981 to support ule, sle latch predicates.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D38177
llvm-svn: 315616
WMMA = "Warp Level Matrix Multiply-Accumulate".
These are the new instructions introduced in PTX6.0 and available
on sm_70 GPUs.
Differential Revision: https://reviews.llvm.org/D38645
llvm-svn: 315601
Building with BUILD_SHARED_LIBS makes it tricky to copy around
executables at will, since they won't be able to find the LLVM
libraries any more. This makes testing a feature that's based on the
executable name problematic, so we'll just disable these two tests in
that configuration.
We could potentially fix this by symlinking the lib directory into the
test directory, but that wouldn't work on windows, and losing testing
on windows would be far worse than losing testing on a configuration
that's barely even supported.
llvm-svn: 315599
Add profitability checks for modifying counted loops to use the mtctr instruction.
The latency of mtctr is only justified if there are more than 4 comparisons that
will be removed as a result. Usually counted loops are formed relatively early
and before unrolling, so most low trip count loops often don't survive. However
we want to ensure that if they do, we do not mistakenly update them to mtctr loops.
Use CodeMetrics to ensure we are only doing this for small loops with small trip counts.
Differential Revision: https://reviews.llvm.org/D38212
llvm-svn: 315592
Summary:
The interpolation mode workaround ensures that at least one
interpolation mode is enabled in PSInputAddr. It does not also check
PSInputEna on the basis that the user might enable bits in that
depending on run-time state.
However, for amdpal os type, the user does not enable some bits after
compilation based on run-time states; the register values being
generated here are the final ones set in the hardware. Therefore, apply
the workaround to PSInputAddr and PSInputEnable together. (The case
where a bit is set in PSInputAddr but not in PSInputEnable is where the
frontend set up an input arg for a particular interpolation mode, but
nothing uses that input arg. Really we should have an earlier pass that
removes such an arg.)
Reviewers: arsenm, nhaehnle, dstuttard
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D37758
llvm-svn: 315591
Summary:
The comments in the code said
// Remove <def,read-undef> flags. This def is now a partial redef.
but the code didn't just remove read-undef, it could introduce new ones which
could cause errors.
E.g. if we have something like
%vreg1<def> = IMPLICIT_DEF
%vreg2:subreg1<def, read-undef> = op %vreg3, %vreg4
%vreg2:subreg2<def> = op %vreg6, %vreg7
and we merge %vreg1 and %vreg2 then we should not set undef on the second subreg
def, which the old code did.
Now we solve this by actually do what the code comment says. We remove
read-undef flags rather than remove or introduce them.
Reviewers: qcolombet, MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38616
llvm-svn: 315564
Here we add a secondary option parser to llvm-isel-fuzzer (and provide
it for use with other fuzzers). With this, you can copy the fuzzer to
a name like llvm-isel-fuzzer=aarch64-gisel for a fuzzer that fuzzer
AArch64 with GlobalISel enabled, or fuzzer=x86_64 to fuzz x86, with no
flags required. This should be useful for running these in OSS-Fuzz.
Note that this handrolls a subset of cl::opts to recognize, rather
than embedding a complete command parser for argv[0]. If we find we
really need the flexibility of handling arbitrary options at some
point we can rethink this.
This re-applies 315545 using "=" instead of ":" as a separator for
arguments.
llvm-svn: 315557
It broke some tests on Windows:
Failing Tests (4):
LLVM :: tools/llvm-isel-fuzzer/execname-options.ll
LLVM :: tools/llvm-isel-fuzzer/missing-triple.ll
LLVM :: tools/llvm-isel-fuzzer/x86-empty-bc.ll
LLVM :: tools/llvm-isel-fuzzer/x86-empty.ll
> llvm-isel-fuzzer: Handle a subset of backend flags in the executable name
>
> Here we add a secondary option parser to llvm-isel-fuzzer (and provide
> it for use with other fuzzers). With this, you can copy the fuzzer to
> a name like llvm-isel-fuzzer:aarch64-gisel for a fuzzer that fuzzer
> AArch64 with GlobalISel enabled, or fuzzer:x86_64 to fuzz x86, with no
> flags required. This should be useful for running these in OSS-Fuzz.
>
> Note that this handrolls a subset of cl::opts to recognize, rather
> than embedding a complete command parser for argv[0]. If we find we
> really need the flexibility of handling arbitrary options at some
> point we can rethink this.
llvm-svn: 315554
Here we add a secondary option parser to llvm-isel-fuzzer (and provide
it for use with other fuzzers). With this, you can copy the fuzzer to
a name like llvm-isel-fuzzer:aarch64-gisel for a fuzzer that fuzzer
AArch64 with GlobalISel enabled, or fuzzer:x86_64 to fuzz x86, with no
flags required. This should be useful for running these in OSS-Fuzz.
Note that this handrolls a subset of cl::opts to recognize, rather
than embedding a complete command parser for argv[0]. If we find we
really need the flexibility of handling arbitrary options at some
point we can rethink this.
llvm-svn: 315545
- Move PAL metadata definitions to AMDGPUMetadata
- Make naming consistent with HSA metadata
Differential Revision: https://reviews.llvm.org/D38745
llvm-svn: 315523
- Rename AMDGPUCodeObjectMetadata to AMDGPUMetadata (PAL metadata will be included in this file in the follow up change)
- Rename AMDGPUCodeObjectMetadataStreamer to AMDGPUHSAMetadataStreamer
- Introduce HSAMD namespace
- Other minor name changes in function and test names
llvm-svn: 315522
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
Summary:
Fixes a bogus iterator resulting from the removal of a block's first instruction at the point that incremental update is enabled.
Patch by Paul Walker.
Reviewers: fhahn, Gerolf, efriedma, MatzeB
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D38734
llvm-svn: 315502
Currently we produce a bunch of unnecessary code when emitting the
prologue/epilogue for spills/restores. Namely, if the load from stack
slot/store to stack slot instruction is an X-Form instruction, we will
always produce an LIS/ORI sequence for the stack offset.
Furthermore, we have not exploited the P9 vector D-Form loads/stores for this
purpose.
This patch address both issues.
Specifying the D-Form load as the instruction to use for stack spills/reloads
should be safe because:
1. The stack should be aligned according to the ABI
2. If the stack isn't aligned, PPCRegisterInfo::eliminateFrameIndex() will
check for the offset being a multiple of 16 and will convert it to an
X-Form instruction if it isn't.
Differential Revision : https://reviews.llvm.org/D38758
llvm-svn: 315500
Previously we would only look in the current directory for a
resource, which might not be the same as the directory of the
rc file. Furthermore, MSVC rc supports a /I option, and can
also look in the system environment. This patch adds support
for this search algorithm.
Differential Revision: https://reviews.llvm.org/D38740
llvm-svn: 315499
Legalization of fp128 assumes things that we should have asserts for,
so that's another potential improvement.
Differential Revision: https://reviews.llvm.org/D38771
llvm-svn: 315485
ubsan caught an issue I made where I was converting a null pointer to a
reference.
elf utils implements a particularly extreme form of stripping that I'd
like to support. eu-strip has an option called "strip-sections" that
removes all section headers and leaves only program headers and the
segment data. I have implemented this option partly as a test but mainly
because in Fuchsia we would like to use this option to minimize the size
of our executables. The other strip options that are on my list include
--strip-all and --strip-debug. This is a preliminary implementation that
I'd like to start using in Fuchsia builds if possible. This change
implements such a stripping option for llvm-objcopy
Differential Revision: https://reviews.llvm.org/D38335
llvm-svn: 315484
The pipeliner is generating a serial sequence that causes poor
register allocation when a post-increment instruction appears
prior to the use of the post-increment register. This occurs when
there is a circular set of dependences involved with a sequence
of instructions in the same cycle. In this case, there is no
serialization of the parallel semantics that will not cause an
additional register to be allocated.
This patch fixes the problem by changing the instructions so that
the post-increment instruction is used by the subsequent
instruction, which enables the register allocator to make a
better decision and not require another register.
Patch by Brendon Cahoon.
llvm-svn: 315466
Eg:
insert v4i32 V, (v2i16 X), 2 --> shuffle v8i16 V', X', {0,1,2,3,8,9,6,7}
This is a generalization of the IR fold in D38316 to handle insertion into a non-undef vector.
We may want to abandon that one if we can't find value in squashing the more specific pattern sooner.
We're using the existing legal shuffle target hook to avoid AVX512 horror with vXi1 shuffles.
There may be room for improvement in the shuffle lowering here, but that would be follow-up work.
Differential Revision: https://reviews.llvm.org/D38388
llvm-svn: 315460
This patch adds timestamp verification for swiftmodule files.
- A new flag is provided to allows us to continue testing of the code
for embedding the__swift_ast. (git doesn't maintain timestamps)
- Adds a new test for fat (arm) binaries.
Differential revision: https://reviews.llvm.org/D38686
llvm-svn: 315456
Adding this test files now so after another commit that will add a new pattern for
TESTM and TESTNM instructions will show the improvemnts that have been done.
Change-Id: If3908b7f91897d764053312365a2bc1de78b291d
llvm-svn: 315443
This patch fixes the miscompile that happens when PRE hoists loads across guards and
other instructions that don't always pass control flow to their successors. PRE is now prohibited
to hoist across such instructions because there is no guarantee that the load standing after such
instruction is still valid before such instruction. For example, a load from under a guard may be
invalid before the guard in the following case:
int array[LEN];
...
guard(0 <= index && index < LEN);
use(array[index]);
Differential Revision: https://reviews.llvm.org/D37460
llvm-svn: 315440
Sinking of unordered atomic load into loop must be disallowed because it turns
a single load into multiple loads. The relevant section of the documentation
is: http://llvm.org/docs/Atomics.html#unordered, specifically the Notes for
Optimizers section. Here is the full text of this section:
> Notes for optimizers
> In terms of the optimizer, this **prohibits any transformation that
> transforms a single load into multiple loads**, transforms a store into
> multiple stores, narrows a store, or stores a value which would not be
> stored otherwise. Some examples of unsafe optimizations are narrowing
> an assignment into a bitfield, rematerializing a load, and turning loads
> and stores into a memcpy call. Reordering unordered operations is safe,
> though, and optimizers should take advantage of that because unordered
> operations are common in languages that need them.
Patch by Daniil Suchkov!
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D38392
llvm-svn: 315438
IRCE should not apply when the safe iteration range is proved to be empty.
In this case we do unneeded job creating pre/post loops and then never
go to the main loop.
This patch makes IRCE not apply to empty safe ranges, adds test for this
situation and also modifies one of existing tests where it used to happen
slightly.
Reviewed By: anna
Differential Revision: https://reviews.llvm.org/D38577
llvm-svn: 315437
elf utils implements a particularly extreme form of stripping that I'd
like to support. eu-strip has an option called "strip-sections" that
removes all section headers and leaves only program headers and the
segment data. I have implemented this option partly as a test but mainly
because in Fuchsia we would like to use this option to minimize the size
of our executables. The other strip options that are on my list include
--strip-all and --strip-debug. This is a preliminary implementation that
I'd like to start using in Fuchsia builds if possible. This change
implements such a stripping option for llvm-objcopy
Differential Revision: https://reviews.llvm.org/D38335
llvm-svn: 315412
This change adds the ability to use the "-R"/"-remove-section" option
multiple times.
Differential Revision: https://reviews.llvm.org/D38332
llvm-svn: 315385
Summary: In the current implementation, we only have accurate profile count for standalone symbols. For inlined functions, we do not have entry count data because it's not available in LBR. In this patch, we use the first instruction's frequency to estimiate the function's entry count, especially for inlined functions. This may be inaccurate due to debug info in optimized code. However, this is a better estimate than the static 80/20 estimation we have in the current implementation.
Reviewers: tejohnson, davidxl
Reviewed By: tejohnson
Subscribers: sanjoy, llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D38478
llvm-svn: 315369
Rather than using the AdditionalPredicates mechanism to guard
the microMIPS instructions, use the existing predicates to properly
guard those instructions.
This also resolves a case where an instruction pattern was incorrectly
available for microMIPS32R6, which caused a register allocation failure
as the registers specified in the pattern were not available.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38451
llvm-svn: 315362
opt-bisect/optnone disable the AMDGPUUniformAnnotateValues pass.
The heuristic in the custom selector for brcond deferred the
branch uniformity check to the pattern, which would fail.
llvm-svn: 315360
This patch adds a post-linking pass which replaces the function pointer of enqueued
block kernel with a global variable (runtime handle) and adds
runtime-handle attribute to the enqueued block kernel.
In LLVM CodeGen the runtime-handle metadata will be translated to
RuntimeHandle metadata in code object. Runtime allocates a global buffer
for each kernel with RuntimeHandel metadata and saves the kernel address
required for the AQL packet into the buffer. __enqueue_kernel function
in device library knows that the invoke function pointer in the block
literal is actually runtime handle and loads the kernel address from it
and puts it into AQL packet for dispatching.
This cannot be done in FE since FE cannot create a unique global variable
with external linkage across LLVM modules. The global variable with internal
linkage does not work since optimization passes will try to replace loads
of the global variable with its initialization value.
Differential Revision: https://reviews.llvm.org/D38610
llvm-svn: 315352
This change adds support for removing sections using the -R field (as
GNU objcopy does as well). This change should let us add many helpful
tests and is a proper stepping stone for adding more general kinds of
stripping.
Differential Revision: https://reviews.llvm.org/D38260
llvm-svn: 315346
This patch ensures that the rule:
fold (zext (load x)) -> (zext (truncate (zextload x)))
propagates the SDLoc of the load to the zextload.
<rdar://problem/33755881>
llvm-svn: 315340
Summary:
This leak doesn't reproduce locally on macOS 10.12, but is causing
buildbot failures. Disable leak checking until it can be fixed.
Reviewers: sqlbyme, qcolombet, enderby, bruno
Reviewed By: bruno
Subscribers: bruno, llvm-commits
Differential Revision: https://reviews.llvm.org/D38699
llvm-svn: 315337
Summary:
The pass to fix function bitcasts generates thunks for functions that
are called directly with a mismatching signature. It was also generating
thunks in cases where the function was address-taken, causing aliasing
problems in otherwise valid cases.
This patch tightens the restrictions for when the pass runs.
Reviewers: sunfish, dschuff
Subscribers: jfb, sbc100, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D38640
llvm-svn: 315326
Add instruction definitions for FP32 mode for recip.d and rsqrt.d.
Previously these instructions were only defined when targeting the
full 64-bit FPU model but were not guarded properly.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38400
llvm-svn: 315318
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315316
Previously, the parsing of the 'subu $reg, ($reg,) imm' relied on a parser
which also rendered the operand to the instruction. In some cases the
general parser could construct an MCExpr which was not a MCConstantExpr
which MipsAsmParser was expecting.
Address this by altering the special handling to cope with unexpected inputs
and fine-tune the handling of cases where an register name that is not
available in the current ABI is regarded as not a match for the custom parser
but also not as an outright error.
Also enforces the binutils restriction that only constants are accepted.
This partially resolves PR34391.
Thanks to Ed Maste for reporting the issue!
Reviewers: nitesh.jain, arichardson
Differential Revision: https://reviews.llvm.org/D37476
llvm-svn: 315310
Summary:
See https://llvm.org/PR33743 for more details
It seems that for non-power of 2 vector sizes, the algorithm can produce
non-matching sizes for input and result causing an assert.
This usually isn't a problem as the isAnyExtend check will weed these out, but
in some cases (most often with lots of undefined values for the mask indices) it
can pass this check for non power of 2 vectors.
Adding in an extra check that ensures that bit size will match for the result
and input (as required)
Subscribers: nhaehnle
Differential Revision: https://reviews.llvm.org/D35241
llvm-svn: 315307
Previously, the code that implemented the GNU assembler aliases for the
LDRD and STRD instructions (where the second register is omitted)
assumed that the input was a valid instruction. This caused assertion
failures for every example in ldrd-strd-gnu-bad-inst.s.
This improves this code so that it bails out if the instruction is not
in the expected format, the check bails out, and the asm parser is run
on the unmodified instruction.
It also relaxes the alias on thumb targets, so that unaligned pairs of
registers can be used. The restriction that Rt must be even-numbered
only applies to the ARM versions of these instructions.
Differential revision: https://reviews.llvm.org/D36732
llvm-svn: 315305
This adds diagnostic strings for the ARM floating-point register
classes, which will be used when these classes are expected by the
assembler, but the provided operand is not valid.
One of these, DPR, requires C++ code to select the correct error
message, as that class contains different registers depending on the
FPU. The rest can all have their diagnostic strings stored in the
tablegen decription of them.
Differential revision: https://reviews.llvm.org/D36693
llvm-svn: 315304
This adds diagnostic strings for the ARM general-purpose register
classes, which will be used when these classes are expected by the
assembler, but the provided operand is not valid.
One of these, rGPR, requires C++ code to select the correct error
message, as that class contains different registers in pre-v8 and v8
targets. The rest can all have their diagnostic strings stored in the
tablegen description of them.
Differential revision: https://reviews.llvm.org/D36692
llvm-svn: 315303
Summary:
Atomic buffer operations do not work (and trap on gfx9) when the
components are unaligned, even if their sum is aligned.
Previously, we generated an offset of 4156 without an SGPR by
splitting it as 4095 + 61 (immediate + inline constant). The
highest offset for which we can do this correctly is 4156 = 4092 + 64.
Fixes dEQP-GLES31.functional.ssbo.atomic.*
Reviewers: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D37850
llvm-svn: 315302
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315297
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
NFC.
Updated 6 regression tests to differentiate between HASWELL and SKYLAKE scheduling information.
The fix is in preparation of a patch to update the information of the Skylake Client scheduling to include the appropriate load and store latencies.
Reviewers: zvi, RKSimon
Differential Revision: https://reviews.llvm.org/D38685
Change-Id: Ifc6b98d9eaf266913698f24c766fd994fc977555
llvm-svn: 315291
The issue is that we assume operand zero of the input to the add instruction
is a register. In this case, the input comes from inline assembly and
operand zero is not a register thereby causing a crash.
The code will bail anyway if the input instruction doesn't have the right
opcode. So do that check first and let short-circuiting prevent the crash.
llvm-svn: 315285
Eliminate inttype phi with inttoptr/ptrtoint.
This version fixed a bug in finding the matching
phi -- the order of the incoming blocks may be
different (triggered in self build on Windows).
A new test case is added.
llvm-svn: 315272
Removes two report_fatal_errors.
Implement this by removing EmitCFICommon, and do the checking in
getCurrentDwarfFrameInfo. Have the callers check for null before
dereferencing it.
llvm-svn: 315264
This makes the .seh_ directives slightly more usable from standalone
assembly files.
This removes a large number of report_fatal_errors and recovers from the
error by ignoring the directive.
llvm-svn: 315262
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
llvm-svn: 315259
We end up creating COPY's that are either truncating/extending and this
should be illegal.
https://reviews.llvm.org/D37640
Patch for X86 and ARM by igorb, rovka
llvm-svn: 315240
Summary:
On behalf of julia.koval@intel.com
The patch transforms canonical version of unsigned saturation, which is sub(max(a,b),a) or sub(a,min(a,b)) to special psubus insturuction on targets, which support it(8bit and 16bit uints).
umax(a,b) - b -> subus(a,b)
a - umin(a,b) -> subus(a,b)
There is also extra case handled, when right part of sub is 32 bit and can be truncated, using UMIN(this transformation was discussed in https://reviews.llvm.org/D25987).
The example of special case code:
```
void foo(unsigned short *p, int max, int n) {
int i;
unsigned m;
for (i = 0; i < n; i++) {
m = *--p;
*p = (unsigned short)(m >= max ? m-max : 0);
}
}
```
Max in this example is truncated to max_short value, if it is greater than m, or just truncated to 16 bit, if it is not. It is vaid transformation, because if max > max_short, result of the expression will be zero.
Here is the table of types, I try to support, special case items are bold:
| Size | 128 | 256 | 512
| ----- | ----- | ----- | -----
| i8 | v16i8 | v32i8 | v64i8
| i16 | v8i16 | v16i16 | v32i16
| i32 | | **v8i32** | **v16i32**
| i64 | | | **v8i64**
Reviewers: zvi, spatel, DavidKreitzer, RKSimon
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37534
llvm-svn: 315237
It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
Summary:
swiftc emits symbols without flags set, which led dsymutil to ignore
them when searching for global symbols, causing dwarf location data
to be omitted. Xcode's dsymutil handles this case correctly, and emits
valid location data. Add this functionality to llvm-dsymutil by
allowing parsing of symbols with no flags set.
Reviewers: aprantl, friss, JDevlieghere
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38587
llvm-svn: 315218
This allows rc files to have comments. Eventually we should
just use clang's c preprocessor, but that's a bit larger
effort for minimal gain, and this is straightforward.
Differential Revision: https://reviews.llvm.org/D38651
llvm-svn: 315207
E.g. if we have a (xor(overflow-bit), 1) where overflow-bit comes from an
intrinsic like llvm.sadd.with.overflow then we can kill the xor and use the
inverted condition code for the CSEL.
rdar://28495949
Reviewed By: kristof.beyls
Differential Revision: https://reviews.llvm.org/D38160
llvm-svn: 315205
We believe that despite AMD's documentation, that they really do support all 32 comparision predicates under AVX.
Differential Revision: https://reviews.llvm.org/D38609
llvm-svn: 315201
Summary:
We currently disable some converting of shuffles to MOVSS/MOVSD during legalization if SSE41 is enabled. But later during shuffle combining we go back to prefering MOVSS/MOVSD.
Additionally we have patterns that look for BLENDIs to detect scalar arithmetic operations. I believe due to the combining using MOVSS/MOVSD these are unnecessary.
Interestingly, we still codegen blend instructions even though lowering/isel emit movss/movsd instructions. Turns out machine CSE commutes them to blend, and then commuting those blends back into blends that are equivalent to the original movss/movsd.
This patch fixes the inconsistency in legalization to prefer MOVSS/MOVSD. The one test change was caused by this change. The problem is that we have integer types and are mostly selecting integer instructions except for the shufps. This shufps forced the execution domain, but the vpblendw couldn't have its domain changed with a naive instruction swap. We could fix this by special casing VPBLENDW based on the immediate to widen the element type.
The rest of the patch is removing all the excess scalar patterns.
Long term we should probably add isel patterns to make MOVSS/MOVSD emit blends directly instead of relying on the double commute. We may also want to consider emitting movss/movsd for optsize. I also wonder if we should still use the VEX encoded blendi instructions even with AVX512. Blends have better throughput, and that may outweigh the register constraint.
Reviewers: RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38023
llvm-svn: 315181
Adding the scheduling information for the SkylakeServer (SKX) target.
This patch adds the instruction scheduling information for the SkylakeServer (SKX) architecture target by adding the file X86SchedSkylakeServer.td located under the X86 Target.
We used the scheduling information retrieved from the Skylake architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each SKL instruction.
The patch continues the scheduling replacement and insertion effort started with the SNB target in r310792, the HSW target in r311879 and the SkylakeClient (SKL) target in rL313613.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: zvi, RKSimon, craig.topper, chandlerc, aymanmu
Differential Revision: https://reviews.llvm.org/D38443
Change-Id: I5c228fcc09e9e5a99b6116e62b356c4f9b971185
llvm-svn: 315175
Recognise cases when we can merge the shuffles with their horizontal (HADD/HSUB/PACK) instruction inputs.
Replaces an older implementation which performed some of this during lowering, expanding an existing target shuffle combine stage instead.
Differential Revision: https://reviews.llvm.org/D38506
llvm-svn: 315150
Say you have two identical linkonceodr functions, one in M1 and one in M2.
Say that the outliner outlines A,B,C from one function, and D,E,F from another
function (where letters are instructions). Now those functions are not
identical, and cannot be deduped. Locally to M1 and M2, these outlining
choices would be good-- to the whole program, however, this might not be true!
To mitigate this, this commit makes it so that the outliner sees linkonceodr
functions as unsafe to outline from. It also adds a flag,
-enable-linkonceodr-outlining, which allows the user to specify that they
want to outline from such functions when they know what they're doing.
Changing this handles most code size regressions in the test suite caused by
competing with linker dedupe. It also doesn't have a huge impact on the code
size improvements from the outliner. There are 6 tests that regress > 5% from
outlining WITH linkonceodrs to outlining WITHOUT linkonceodrs. Overall, most
tests either improve or are not impacted.
Not outlined vs outlined without linkonceodrs:
https://hastebin.com/raw/qeguxavuda
Not outlined vs outlined with linkonceodrs:
https://hastebin.com/raw/edepoqoqic
Outlined with linkonceodrs vs outlined without linkonceodrs:
https://hastebin.com/raw/awiqifiheb
Numbers generated using compare.py with -m size.__text. Tests run for AArch64
with -Oz -mllvm -enable-machine-outliner -mno-red-zone.
llvm-svn: 315136
Patch to fix ternlog instructions with a folded
broadcast. The broadcast decorator, e.g. {1toX}, was missing.
Differential Revision: https://reviews.llvm.org/D38649
llvm-svn: 315122
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
llvm-svn: 315121
This allows the escape sequences (\a, \n, \r, \t, \\, \x[0-9a-f]*,
\[0-7]*, "") to appear in .rc scripts. These are parsed and output in
the same way as it's done in original MS implementation.
The way these sequences are processed depends on the type of the
resource it resides in, and on whether the user declared the string to
be "wide" or "narrow".
I tried to maintain the maximum compatibility with the original tool
(and fail in some erroneous situations that are accepted by .rc).
However, there are some (extremely rare) cases where Microsoft tool
outputs nonsense. I found it infeasible to detect such casses.
Patch by Marek Sokolowski
Differential Revision: https://reviews.llvm.org/D38426
llvm-svn: 315118
This allows rc to serialize user-defined resources, as
documented at:
msdn.microsoft.com/en-us/library/windows/desktop/aa381054.aspx
Escape sequences are yet unavailable, and are to be added in one of
child patches.
Patch by: Marek Sokolowski
Differential Revision: https://reviews.llvm.org/D38423
llvm-svn: 315117
This allows llvm-rc to serialize STRINGTABLE resources.
These are output in an unusual way: we locate them at the end of the
file, and strings are merged into bundles of max 16 strings, depending
on their IDs, language, and characteristics.
Ref: msdn.microsoft.com/en-us/library/windows/desktop/aa381050.aspx
Patch by: Marek Sokolowski
Differential Revision: https://reviews.llvm.org/D38420
llvm-svn: 315112
This is now able to dump VERSIONINFO resources.
Ref: msdn.microsoft.com/en-us/library/windows/desktop/aa381058.aspx
Differential Revision: https://reviews.llvm.org/D38410
Patch by: Marek Sokolowski
llvm-svn: 315110
This is part 6 of llvm-rc serialization.
This adds ability to output cursors and icons as resources.
Unfortunately, we can't just copy .cur or .ico files to output - as each
file might contain multiple images, each of them needs to be unpacked
and stored as a separate resource. This forces us to parse cursor and
icon contents. (Fortunately, these formats are pretty similar and can be
processed by mostly common code).
As test files are binary, here is a short explanation of .cur and .ico
files stored:
cursor.cur, cursor-8.cur, cursor-32.cur are sample correct cursor files,
differing in their bit depth.
icon-old.ico, icon-new.ico are sample correct icon files;
icon-png.ico is a sample correct icon file in PNG format (instead of
usual BMP);
cursor-eof.cur is an incorrect cursor file - this is cursor.cur with
some of its final bytes removed.
cursor-bad-offset.cur is an incorrect cursor file - image header states
that image data begins at offset 0xFFFFFFFF.
Sample correct cursors and icons were created by Nico Weber.
Patch by Marek Sokolowski
Differential Revision: https://reviews.llvm.org/D37878
llvm-svn: 315109
This appears to be miscompiling Clang, as shown on two Windows bootstrap
bots:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/7611http://lab.llvm.org:8011/builders/clang-x64-ninja-win7/builds/6870
Nothing else is in the blame list. Both emit errors on this valid code
in the Windows ucrt headers:
C:\...\ucrt\malloc.h:95:32: error: invalid operands to binary expression ('char *' and 'int')
_Ptr = (char*)_Ptr + _ALLOCA_S_MARKER_SIZE;
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~
I am attempting to reproduce this now.
This reverts r315044
llvm-svn: 315108
This is part 5 of llvm-rc serialization support.
This allows DIALOG and DIALOGEX to serialize if dialog-specific optional
statements are provided. These are (as of now): CAPTION, FONT, and
STYLE.
Notably, FONT statement can take more than two arguments when describing
DIALOGEX resources (as in
msdn.microsoft.com/en-us/library/windows/desktop/aa381013.aspx). I made
some changes to the parser to reflect this fact.
Patch by Marek Sokolowski
Differential Revision: https://reviews.llvm.org/D37864
llvm-svn: 315104
At the last LLVM dev meeting we had a debug info for optimized code
BoF session. In that session I presented some graphs that showed how
the quality of the debug info produced by LLVM changed over the last
couple of years. This is a cleaned up version of the patch I used to
collect the this data. It is implemented as an extension of
llvm-dwarfdump, adding a new --statistics option. The intended
use-case is to automatically run this on the debug info produced by,
e.g., our bots, to identify eyebrow-raising changes or regressions
introduced by new transformations that we could act on.
In the current form, two kinds of data are being collected:
- The number of variables that have a debug location versus the number
of variables in total (this takes into account inlined instances of
the same function, so if a variable is completely missing form only
one instance it will be found).
- The PC range covered by variable location descriptions versus the PC
range of all variables' containing lexical scopes.
The output format is versioned and extensible, so I'm looking forward
to both bug fixes and ideas for other data that would be interesting
to track.
Differential Revision: https://reviews.llvm.org/D36627
llvm-svn: 315101
In some cases an instruction is deleted from the block during combining,
however it can still exist in the legalizer worklist.
This change modifies the combiner routines to add the given MI to the
dead instruction list rather than trying to remove it from the block
themselves. The responsibility is then on the caller to delete the instruction
from the block and any worklists.
Differential Revision: https://reviews.llvm.org/D38622
llvm-svn: 315092
The bitcode reader looks specifically for `__DATA, __objc_catlist` as a
section name. However, SVN r304661 removed the spaces (the two names
are functionally equivalent but do not compare equally
lexicographically). This causes compatibility issues. Add an
auto-upgrade path for removing the spaces as well as use the new name in
the LTO plugin.
llvm-svn: 315086
This addresses two sources of inconsistency in test configuration
files.
1. Substitution boundaries. Previously you would specify a
substitution, such as 'lli', and then additionally a set
of characters that should fail to match before and after
the tool. This was used, for example, so that matches that
are parts of full paths would not be replaced. But not all
tools did this, and those that did would often re-invent
the set of characters themselves, leading to inconsistency.
Now, every tool substitution defaults to using a sane set
of reasonable defaults and you have to explicitly opt out
of it. This actually fixed a few latent bugs that were
never being surfaced, but only on accident.
2. There was no standard way for the system to decide how to
locate a tool. Sometimes you have an explicit path, sometimes
we would search for it and build up a path ourselves, and
sometimes we would build up a full command line. Furthermore,
there was no standardized way to handle missing tools. Do we
warn, fail, ignore, etc? All of this is now encapsulated in
the ToolSubst class. You either specify an exact command to
run, or an instance of FindTool('<tool-name>') and everything
else just works. Furthermore, you can specify an action to
take if the tool cannot be resolved.
Differential Revision: https://reviews.llvm.org/D38565
llvm-svn: 315085
Summary:
swiftc emits symbols without flags set, which led dsymutil to ignore
them when searching for global symbols, causing dwarf location data
to be omitted. Xcode's dsymutil handles this case correctly, and emits
valid location data. Add this functionality to llvm-dsymutil by
allowing parsing of symbols with no flags set.
Reviewers: aprantl, friss, JDevlieghere
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38587
llvm-svn: 315082
Old expansion was 20 VGPRs, 78 SGPRs and ~380 instructions.
This expansion is 11 VGPRs, 12 SGPRs and ~120 instructions.
Passes OpenCL conformance test_integer_ops quick_[u]long_math
Differential Revision: https://reviews.llvm.org/D38607
llvm-svn: 315081
Summary: stripPointerCast is not reliably returning the value that's being type-casted. Instead it may look further at function attributes to further propagate the value. Instead of relying on stripPOintercast, the more reliable solution is to directly use the pointer to the promoted direct call.
Reviewers: tejohnson, davidxl
Reviewed By: tejohnson
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D38603
llvm-svn: 315077
Unfortunately TableGen doesn't handle this yet:
Unable to deduce gMIR opcode to handle Src (which is a leaf).
Just add some temporary hand-written code to generate the proper MOVsr.
llvm-svn: 315071
Summary:
Xcode's dsymutil emits a __swift_ast DWARF section, which is required for debugging,
and which contains a byte-for-byte dump of the swiftmodule file.
Add this feature to llvm-dsymutil.
Tested with `gobjdump --dwarf=info -s`, by verifying that the contents of
`__DWARF.__swift_ast` match between Xcode's dsymutil and llvm-dsymutil
(Xcode's dwarfdump and llvm-dwarfdump don't currently recognize the
__swift_ast section).
Reviewers: aprantl, friss
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D38504
llvm-svn: 315066
The machine scheduler (before register allocation) is enabled by default for
SystemZ.
The SelectionDAG scheduling preference now becomes source order scheduling
(was regpressure).
Review: Ulrich Weigand
https://reviews.llvm.org/D37977
llvm-svn: 315063
It is possible for two modules to define the same set of external
symbols without causing a duplicate symbol error at link time,
as long as each of the symbols is a comdat member. So we cannot
use them as part of a unique id for the module.
Differential Revision: https://reviews.llvm.org/D38602
llvm-svn: 315026
Add extending loads and constant offset patterns
A bit more refactoring of the tablegen to make the patterns fairly nice and
uniform between the regular and atomic loads.
Differential Revision: https://reviews.llvm.org/D38523
llvm-svn: 315022
Summary: In SamplePGO, when an indirect call is promoted in the profiled binary, before profile annotation, it will be promoted and inlined. For the original indirect call, the current implementation will not mark VP profile on it. This is an issue when profile becomes stale. This patch annotates VP prof on indirect calls during annotation.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D38477
llvm-svn: 315016
Summary:
Xcode's dsymutil emits a __swift_ast DWARF section, which is required for debugging,
and which contains a byte-for-byte dump of the swiftmodule file.
Add this feature to llvm-dsymutil.
Tested with `gobjdump --dwarf=info -s`, by verifying that the contents of
`__DWARF.__swift_ast` match between Xcode's dsymutil and llvm-dsymutil
(Xcode's dwarfdump and llvm-dwarfdump don't currently recognize the
__swift_ast section).
Reviewers: aprantl, friss
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D38504
llvm-svn: 315014
Ensure the program_headers call will fail correctly if the program
headers are larger than the underlying buffer.
Patch by Parker Thompson!
llvm-svn: 315012
Summary:
Xcode's dsymutil emits a __swift_ast DWARF section, which is required for debugging,
and which contains a byte-for-byte dump of the swiftmodule file.
Add this feature to llvm-dsymutil.
Tested with `gobjdump --dwarf=info -s`, by verifying that the contents of
`__DWARF.__swift_ast` match between Xcode's dsymutil and llvm-dsymutil
(Xcode's dwarfdump and llvm-dwarfdump don't currently recognize the
__swift_ast section).
Reviewers: aprantl, friss
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D38504
llvm-svn: 315004
This is the same exact change we did for the current pass manager
in rL314997, but the new pass manager pipeline already happened
to run GlobalOpt after the inliner, so we just insert a run of
GDCE here.
llvm-svn: 315003
Summary: Make test robust enough to not fail due to CFG changes and re-enable for ARM/AArch64.
Reviewers: rovka, fhahn
Reviewed By: fhahn
Subscribers: fhahn, aemerson, rengolin, mcrosier, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D38590
llvm-svn: 315002
The inliner performs some kind of dead code elimination as it goes,
but there are cases that are not really caught by it. We might
at some point consider teaching the inliner about them, but it
is OK for now to run GlobalOpt + GlobalDCE in tandem as their
benefits generally outweight the cost, making the whole pipeline
faster.
This fixes PR34652.
Differential Revision: https://reviews.llvm.org/D38154
llvm-svn: 314997
Implement .set dspr2 directive with appropriate feature bits. This
directive is a counterpart of -mattr=dspr2 command line option with the
exception that it does not influence elf header flags.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38537
llvm-svn: 314994
There is data racing to the static variable RecordIndex in index profile reader
when merging in multiple threads. Make it a member variable in
IndexedInstrProfReader to fix this.
Differential Revision: https://reviews.llvm.org/D38431
llvm-svn: 314990
The code which lowers BUILD_VECTOR of consecutive loads into a single vector
load doesn't update chains properly. As a result the vector load can be
reordered with the store to the same location.
The current code in EltsFromConsecutiveLoads only updates the chain following
the first load. The fix is to update the chains following all the loads
comprising the vector.
This is a fix for PR10114.
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D38547
llvm-svn: 314988
When ignoring a load that participates in an interleaved group, make sure to
move a cast that needs to sink after it.
Testcase derived from reproducer of PR34743.
Differential Revision: https://reviews.llvm.org/D38338
llvm-svn: 314986
Instead of trying to keep LastWidenRecipe updated after creating each recipe,
have tryToWiden() retrieve the last recipe of the current VPBasicBlock and check
if it's a VPWidenRecipe when attempting to extend its range. This ensures that
such extensions, optimized to maintain the original instruction order, do so
only when the instructions are to maintain their relative order. The latter does
not always hold, e.g., when a cast needs to sink to unravel first order
recurrence (r306884).
Testcase derived from reproducer of PR34711.
Differential Revision: https://reviews.llvm.org/D38339
llvm-svn: 314981
Previously, instructions that were defined to use the FGR64 register class
were associated with the Mips64 table which was incorrect.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38454
llvm-svn: 314976
Summary:
When reinserting debug values after register allocation, make sure to
insert debug values after each redefinition of debug value register in
the slot index range. The reason for this is that DwarfDebug will end
the range of a debug variable when the physical reg is defined. For
instructions with e.g. tied operands this result in prematurely ended
debug range.
This resolves pr34545
Patch by Karl-Johan Karlsson and Bjorn Pettersson
Reviewers: rnk, aprantl
Reviewed By: rnk
Subscribers: bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D38229
llvm-svn: 314974
Currently llvm-mc just hangs inside infinite loop
while trying to parse file which has ".section .с" inside,
where section name is non-english character.
Patch fixes the issue.
In this patch I also moved content of non-english-characters.s
to test/MC/AsmParser/Inputs folder so that non-english-characters.s
becomes a single testcase for all invalid inputs containing non-english
symbols. That is convinent because llvm-mc otherwise tries
to parse and tokenize the whole testcase file with tools invocations and
it is harder to isolate the issue.
Differential revision: https://reviews.llvm.org/D38545
llvm-svn: 314973
We were using an i1 type and then zero extending to a vector. Instead just create the 0/1 directly as a ConstantInt with the correct type. No need to ask ConstantExpr to zero extend for us.
This bug is a bit tricky to hit because it requires us to visit a zext of an icmp that would normally be simplified to true/false, but that icmp hasnt' been visited yet. In the test case this zext and icmp were created by visiting a udiv and due to worklist ordering we got to the zext first.
Fixes PR34841.
llvm-svn: 314971
Summary: This is to avoid e.g. merging two cheap icmps if the target is not going to expand to something nice later.
Reviewers: dberlin, spatel
Subscribers: davide, nemanjai
Differential Revision: https://reviews.llvm.org/D38232
llvm-svn: 314970
Summary:
The arg1 logging handler changed in compiler-rt to start writing a
different type for entries encountered when logging the first argument
of XRay-instrumented functions. This change allows the trace loader to
support reading these record types as well as prepare for when the
basic (naive) mode implementation starts writing down the argument
payloads.
Without this change, binaries with arg1 logging support enabled start
writing unreadable logs for any of the XRay tracing tools.
Reviewers: pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38550
llvm-svn: 314967
We can support ashr similar to lshr, if we know that none of the shifted in bits are used. In that case SimplifyDemandedBits would normally convert it to lshr. But that conversion doesn't happen if the shift has additional users.
Differential Revision: https://reviews.llvm.org/D38521
llvm-svn: 314945
Summary:
If the pointer width is 32 bits and the calculated GEP offset is
negative, we call APInt::getLimitedValue(), which does a
*zero*-extension of the offset. That's wrong -- we should do an sext.
Fixes a bug introduced in rL314362 and found by Evgeny Astigeevich.
Reviewers: efriedma
Subscribers: sanjoy, javed.absar, llvm-commits, eastig
Differential Revision: https://reviews.llvm.org/D38557
llvm-svn: 314935
Function isLoweredToCall can only accept non-null function pointer, but a function pointer can be null for indirect function call. So check it before calling isLoweredToCall from getInstructionLatency.
Differential Revision: https://reviews.llvm.org/D38204
llvm-svn: 314927
Recommitting r314517 with the fix for handling ConstantExpr.
Original commit message:
Currently, getGEPCost() returns TCC_FREE whenever a GEP is a legal addressing
mode in the target. However, since it doesn't check its actual users, it will
return FREE even in cases where the GEP cannot be folded away as a part of
actual addressing mode. For example, if an user of the GEP is a call
instruction taking the GEP as a parameter, then the GEP may not be folded in
isel.
llvm-svn: 314923
It broke the Chromium / SQLite build; see PR34830.
> Summary:
> 1/ Operand folding during complex pattern matching for LEAs has been
> extended, such that it promotes Scale to accommodate similar operand
> appearing in the DAG.
> e.g.
> T1 = A + B
> T2 = T1 + 10
> T3 = T2 + A
> For above DAG rooted at T3, X86AddressMode will no look like
> Base = B , Index = A , Scale = 2 , Disp = 10
>
> 2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs
> so that if there is an opportunity then complex LEAs (having 3 operands)
> could be factored out.
> e.g.
> leal 1(%rax,%rcx,1), %rdx
> leal 1(%rax,%rcx,2), %rcx
> will be factored as following
> leal 1(%rax,%rcx,1), %rdx
> leal (%rdx,%rcx) , %edx
>
> 3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops,
> thus avoiding creation of any complex LEAs within a loop.
>
> Reviewers: lsaba, RKSimon, craig.topper, qcolombet, jmolloy
>
> Reviewed By: lsaba
>
> Subscribers: jmolloy, spatel, igorb, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D35014
llvm-svn: 314919
Somehow a few massive errors slipped though the cracks of testing.
1. The code in Segment::finalize was left over from the old layout
algorithm. In certain situations this would cause very strange issues
with segment layout. For instance in the shift-segments.test case it
would cause the second segment to have the same offset as the first.
2. In debugging this I discovered another issue. Namely section alignment
was not being computed based on Section->Align but instead
Section->Offset which is bizarre and makes no sense. I have no clue how
it worked in the first place. This issue is also fixed
3. Fixing #2 exposed a bug where things were not being written past the end
of the file that technically should have been. This was because in
certain cases (like overlapping-segments) the end of the file wouldn't
always be bumped if the offset could be chosen relative to an existing
segment that already had it's offset chosen. For fully nested segments
this is fine but for overlapping segments this leaves the end of the
file short. So I changed how the offset is bumped when looping though
segments.
Differential Revision: https://reviews.llvm.org/D38436
llvm-svn: 314918
This patch redefines the MOVSS/MOVSD instructions to take VR128 as its second input. This allows the MOVSS/SD->BLEND commute to work without requiring a COPY to be inserted.
This should fix PR33079
Overall this looks to be an improvement in the generated code. I haven't checked the EXPENSIVE_CHECKS build but I'll do that and update with results.
Differential Revision: https://reviews.llvm.org/D38449
llvm-svn: 314914
r314857 changed the CFG that resulted in the flaky test MachineBranchProb.ll to
fail the bots again. Marking it as unsupported for ARM/AArch64 again until we
find the cause.
llvm-svn: 314912
We can likely remove most of these as redundant in the near future,
but I'm trying to make sure I don't introduce any regressions with D38514.
llvm-svn: 314907
Previously, on long branches (relative jumps of >4 kB), an assertion
failure was hit, as AVRInstrInfo::insertIndirectBranch was not
implemented. Despite its name, it is called by the branch relaxator
for *all* unconditional jumps.
Patch by Thomas Backman.
llvm-svn: 314891