The `_gp_disp` is a magic symbol designates offset between start of
function and gp pointer into GOT. Only `R_MIPS_HI16` and `R_MIPS_LO16`
relocations are permitted with `_gp_disp`. The patch adds the `_gp_disp`
as an ignored symbol and adjusts symbol value before call the `relocateOne`
for `R_MIPS_HI16/LO16` relocations.
Differential Revision: http://reviews.llvm.org/D15480
llvm-svn: 255768
R_X86_64_SIZE64/R_X86_64_SIZE32 relocations were introduced in 0.98v of "System V Application Binary Interface x86-64" (http://www.x86-64.org/documentation/abi.pdf).
Calculation for them is Z + A, where:
Z - Represents the size of the symbol whose index resides in the relocation entry.
A - Represents the addend used to compute the value of the relocatable field.
Differential revision: http://reviews.llvm.org/D15335
llvm-svn: 255332
"Ulrich Drepper, ELF Handling For Thread-Local Storage" (5.5 x86-x64 linker optimizations, http://www.akkadia.org/drepper/tls.pdf) shows how GD can be optimized to IE.
This patch implements the optimization.
Differential revision: http://reviews.llvm.org/D15000
llvm-svn: 254713
Some MIPS relocations including `R_MIPS_HI16/R_MIPS_LO16` use combined
addends. Such addend is calculated using addends of both paired relocations.
Each `R_MIPS_HI16` relocation is paired with the next `R_MIPS_LO16`
relocation. ABI requires to compute such combined addend in case of REL
relocation record format only.
For details see p. 4-17 at
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
This patch implements lookup of the next paired relocation suing new
`InputSectionBase::findPairedRelocLocation` method. The primary
disadvantage of this approach is that we put MIPS specific logic into
the common code. The next disadvantage is that we lookup `R_MIPS_LO16`
for each `R_MIPS_HI16` relocation, while in fact multiple `R_MIPS_HI16`
might be paired with the single `R_MIPS_LO16`. From the other side
this way allows us to keep `MipsTargetInfo` class stateless and implement
later relocation handling in parallel.
This patch does not support `R_MIPS_HI16/R_MIPS_LO16` relocations against
`_gp_disp` symbol. In that case the relocations use a special formula for
the calculation. That will be implemented later.
Differential Revision: http://reviews.llvm.org/D15112
llvm-svn: 254461
Combination of @tlsgd and @gottpoff at the same time leads to miss of R_X86_64_TPOFF64 dynamic relocation. Patch fixes that.
@tlsgd(%rip) - Allocate two contiguous entries in the GOT to hold a tls index
structure (for passing to tls get addr).
@gottpoff(%rip) - Allocate one GOT entry to hold a variable offset in initial TLS
block (relative to TLS block end, %fs:0).
The same situation can be observed for x86 (probably others too, not sure) with corresponding for that target relocations: @tlsgd, @gotntpoff.
Differential revision: http://reviews.llvm.org/D15105
llvm-svn: 254443
Fix was:
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
=>
uint32_t getLocalTlsIndexVA() { return Base::getVA() + LocalTlsIndexOff; }
Both works for my MSVS.
Original commit message:
[ELF] - Refactor of tls_index implementation for tls local dynamic model.
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254433
It failed buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/3782/steps/build/logs/stdio
Target.cpp
In file included from /home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/Target.cpp:20:
/home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/OutputSections.h:136:42: error: use of undeclared identifier 'getVA'
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
llvm-svn: 254432
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254428
Implements @tlsld (LD to LE) and @tlsgd (GD to LE) optimizations.
Patch does not implement the GD->IE case for @tlsgd.
Differential revision: http://reviews.llvm.org/D14870
llvm-svn: 254101
This patch implements next relocations:
R_386_TLS_LE - Negative offset relative to static TLS (GNU version).
R_386_TLS_LE_32 - Offset relative to static TLS block.
These ones are created when using next code sequences:
* @tpoff - The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
* @ntpoff Calculate the negative offset of the variable it is added to relative to the static TLS block.
The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
Information was found in Ulrich Drepper, ELF Handling For Thread-Local Storage, http://www.akkadia.org/drepper/tls.pdf, (6.2, p76)
Differential revision: http://reviews.llvm.org/D14930
llvm-svn: 254090
https://docs.oracle.com/cd/E19683-01/817-3677/chapter6-26/index.html says:
R_386_GOTPC
Resembles R_386_PC32, except that it uses the address of the global offset table in its calculation. The symbol referenced in this relocation normally is _GLOBAL_OFFSET_TABLE_, which also instructs the link-editor to create the global offset table.
Currently _GLOBAL_OFFSET_TABLE_ has value == zero. And we use GOT address to calculate the relocation. This patch does not changes that. It just removes the method which is used only for x86. So it is close to non functional change.
Differential revision: http://reviews.llvm.org/D14993
llvm-svn: 254088
R_X86_64_GOTTPOFF is not always requires GOT entries. Some relocations can be converted to local ones.
Differential revision: http://reviews.llvm.org/D14713
llvm-svn: 253966
With these relocations, it is now possible to build a simple "hello world"
program for AArch64 Debian.
Differential revision: http://reviews.llvm.org/D14917
llvm-svn: 253957
This adds support for:
* Uniquing CIEs
* Dropping FDEs that point to dropped sections
It drops 657 488 bytes from the .eh_frame of a Release+Asserts clang.
The link time impact is smallish. Linking clang with a Release+Asserts
lld goes from 0.488064805 seconds to 0.504763060 seconds (1.034 X slower).
llvm-svn: 252790
leaq symbol@tlsld(%rip), %rdi
call __tls_get_addr@plt
symbol@tlsld (R_X86_64_TLSLD) instructs the linker to generate a tls_index entry (two GOT slots) in the GOT for the entire module (shared object or executable) with an offset of 0. The symbol for this GOT entry doesn't matter (as long as it's either local to the module or null), and gold doesn't put a symbol in the dynamic R_X86_64_DTPMOD64 relocation for the GOT entry.
All other platforms defined in http://www.akkadia.org/drepper/tls.pdf except for Itanium use a similar model where global and local dynamic GOT entries take up 2 contiguous GOT slots, so we can handle this in a unified manner if we don't care about Itanium.
While scanning relocations we need to identify local dynamic relocations and generate a single tls_index entry in the GOT for the module and store the address of it somewhere so we can later statically resolve the offset for R_X86_64_TLSLD relocations. We also need to generate a R_X86_64_DTPMOD64 relocation in the RelaDyn relocation section.
This implementation is a bit hacky. It side steps the issue of GotSection and RelocationSection only handling SymbolBody entries by relying on a specific relocation type. The alternative to this seemed to be completely rewriting how GotSection and RelocationSection work, or using a different hacky signaling method.
llvm-svn: 252682
relocateOne is a function to apply a relocation. Previously, that
function took a pointer to Elf_Rel or Elf_Rela in addition to other
information that can be derived from the relocation entry. This patch
simplifies the parameter list. The new parameters, P or SA, are used
in the ELF spec to describe each relocation. These names make
relocateOne look like a mechanical, direct translation of the ELF spec.
llvm-svn: 251090
Given the name, it is natural for this function to compute the full target.
This will simplify SHF_MERGE handling by allowing getLocalRelTarget to
centralize the addend logic.
llvm-svn: 250731
If one file is MIPS64EL, all files are MIPS64EL, and vice versa.
We do not have to look up MIPS-ness for each file. Currently we
do not support 64-bit MIPS, so the config value is always false.
llvm-svn: 250566
R_PPC64_TOC does not have an associated symbol, but does have a non-zero VA
that target-specific code must compute using some non-trivial rule. We
handled this as a special case in PPC64TargetInfo::relocateOne, where
we knew to write this special address, but that did not work when creating shared
libraries. The special TOC address needs to be the subject of a
R_PPC64_RELATIVE relocation, and so we also need to know how to encode this
special address in the addend of that relocation.
Thus, some target-specific logic is necessary when creating R_PPC64_RELATIVE as
well. To solve this problem, we teach getLocalRelTarget to handle R_PPC64_TOC
as a special case. This allows us to remove the special case in
PPC64TargetInfo::relocateOne (simplifying code there), and naturally allows the
existing logic to do the right thing when creating associated R_PPC64_RELATIVE
relocations for shared libraries.
llvm-svn: 250555
When a relocation points to a SHF_MERGE section, the addend has special meaning.
It should be used to find what in the section the relocation points to. It
should not be added to the output position.
Centralizing it means that the above rule will be implemented once, not once
per target.
llvm-svn: 250421
Rui Ueyama