Summary:
rL323619 marks functions that are calling va_end as not viable for
inlining. This patch reverses that since this va_end doesn't need
access to the vriadic arguments list that are saved on the stack, only
va_start does.
Reviewers: efriedma, fhahn
Reviewed By: fhahn
Subscribers: eraman, haicheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D52067
llvm-svn: 342675
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338969
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary: @llvm.icall.branch.funnel is musttail with variable number of
arguments. After inlining current backend can't separate call targets from call
arguments.
Reviewers: pcc
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45116
llvm-svn: 329235
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
This prevents functions accessing varargs from being inlined if they
have the alwaysinline attribute.
Reviewers: efriedma, rnk, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D42556
llvm-svn: 323619
Summary:
After teaching InlineCost more about address spaces ()
another fault was detected in the inliner. If an argument has
the byval attribute the parameter might be copied to an alloca.
That part seems to work fine even if the argument has a different
address space than the alloca address space. However, if the
address spaces differ, then the inlined function still might
refer to the parameter using the original address space (the
inliner does not handle that situation very well).
This patch avoids the problem by simply disallowing inlining
when there are byval arguments with address space that differs
from the alloca address space.
I'm not really sure how to transform the code if we want to
get inlining for this situation. I assume that it never has
been working, and that the fixes in r321809 just exposed an
old problem.
Fault found by skatkov (Serguei Katkov). It is mentioned in
follow up comments to https://reviews.llvm.org/D40455.
Reviewers: skatkov
Reviewed By: skatkov
Subscribers: uabelho, eraman, llvm-commits, haicheng
Differential Revision: https://reviews.llvm.org/D41898
llvm-svn: 322181
If the varargs are not accessed by a function, we can inline the
function.
Reviewers: dblaikie, chandlerc, davide, efriedma, rnk, hfinkel
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D41335
llvm-svn: 321940
Summary:
I basically copied this patch from here:
https://reviews.llvm.org/D1251
But I skipped some of the refactoring to make the patch more clean.
The new outer3/inner3 test case in ptr-diff.ll triggers the
following assert without this patch:
lib/IR/Constants.cpp:1834: static llvm::Constant *llvm::ConstantExpr::getCompare(unsigned short, llvm::Constant *, llvm::Constant *, bool): Assertion `C1->getType() == C2->getType() && "Op types should be identical!"' failed.
The other new test cases makes sure that there is code coverage
for all modifications in InlineCost.cpp (getting different values
due to not fetching sizes for address space zero). I only guarantee
code coverage for those tests. The tests are not written in a way
that they would break if not having the corrections in
InlineCost.cpp. I found it quite hard to fine tune the tests into
getting different results based on the pointer sizes (except for
the test case where we hit an assert if not teaching InlineCost
about address spaces).
Reviewers: chandlerc, arsenm, haicheng
Reviewed By: arsenm
Subscribers: wdng, eraman, llvm-commits, haicheng
Differential Revision: https://reviews.llvm.org/D40455
llvm-svn: 321809
Currently, inline cost model considers a binary operator as free only if both
its operands are constants. Some simple cases are missing such as a + 0, a - a,
etc. This patch modifies visitBinaryOperator() to call SimplifyBinOp() without
going through simplifyInstruction() to get rid of the constant restriction.
Thus, visitAnd() and visitOr() are not needed.
Differential Revision: https://reviews.llvm.org/D41494
llvm-svn: 321366
The penalty is currently getting applied in a bunch of places where it
doesn't make sense, like bitcasts (which are free) and calls (which
were getting the call penalty applied twice). Instead, just apply the
penalty to binary operators and floating-point casts.
While I'm here, also fix getFPOpCost() to do the right thing in more
cases, so we don't have to dig into function attributes.
Differential Revision: https://reviews.llvm.org/D41522
llvm-svn: 321332
SROA analysis of InlineCost can figure out that some stores can be removed
after inlining and then the repeated loads clobbered by these stores are also
free. This patch finds these clobbered loads and adjust the inline cost
accordingly.
Differential Revision: https://reviews.llvm.org/D33946
llvm-svn: 320814
This patch fix this FIXME in visitPHI()
FIXME: We should potentially be tracking values through phi nodes,
especially when they collapse to a single value due to deleted CFG edges
during inlining.
Differential Revision: https://reviews.llvm.org/D38594
llvm-svn: 320699
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
parameterized emit() calls
Summary: This is not functional change to adopt new emit() API added in r313691.
Reviewed By: anemet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38285
llvm-svn: 315476
The code responsible for analysis of inbounds GEPs is extracted into a separate
function: CallAnalyzer::canFoldInboundsGEP. With the patch SROA
enabling/disabling code is localized at one place instead of spreading across
the code of CallAnalyzer::visitGetElementPtr.
Differential Revision: https://reviews.llvm.org/D38233
llvm-svn: 314787
InlineCost can understand Select IR now. This patch finds free Select IRs and
continue the propagation of SimplifiedValues, ConstantOffsetPtrs, and
SROAArgValues.
Differential Revision: https://reviews.llvm.org/D37198
llvm-svn: 314307
Summary:
Full inline cost is computed when -inline-cost-full is true or ORE is
non-null. This patch adds another way to compute full inline cost by
adding a field to InlineParams. This will be used by SampleProfileLoader
to check legality of inlining a callee that it wants to inline.
Reviewers: danielcdh, haicheng
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37819
llvm-svn: 313185
Change the early exit condition from Cost > Threshold to Cost >= Threshold
because the inline condition is Cost < Threshold.
Differential Revision: https://reviews.llvm.org/D37087
llvm-svn: 311791
Currently, the inline cost model will bail once the inline cost exceeds the
inline threshold in order to avoid unnecessary compile-time. However, when
debugging it is useful to compute the full cost, so this command line option
is added to override the default behavior.
I took over this work from Chad Rosier (mcrosier@codeaurora.org).
Differential Revision: https://reviews.llvm.org/D35850
llvm-svn: 311371
localized to the code that uses those analyses.
Technically, this can change behavior as we no longer require the
existence of the ProfileSummaryInfo analysis to use local profile
information via BFI. We didn't actually require the PSI to have an
interesting profile though, so this only really impacts the behavior in
non-default pass pipelines.
IMO, this makes it substantially less surprising how everything works --
before an analysis that wasn't actually used had to exist to trigger
*any* profile aware inlining. I think the new organization makes it more
obvious where various checks for profile signals happen.
Differential Revision: https://reviews.llvm.org/D36710
llvm-svn: 310888
Summary:
This increases the inlining threshold for hot callsites. Hotness is
defined in terms of block frequency of the callsite relative to the
caller's entry block's frequency. Since this requires BFI in the
inliner, this only affects the new PM pipeline. This is enabled by
default at -O3.
This improves the performance of some internal benchmarks. Notably, an
internal benchmark for Gipfeli compression
(https://github.com/google/gipfeli) improves by ~7%. Povray in SPEC2006
improves by ~2.5%. I am running more experiments and will update the
thread if other benchmarks show improvement/regression.
In terms of text size, LLVM test-suite shows an 1.22% text size
increase. Diving into the results, 13 of the benchmarks in the
test-suite increases by > 10%. Most of these are small, but
Adobe-C++/loop_unroll (17.6% increases) and tramp3d(20.7% size increase)
have >250K text size. On a large application, the text size increases by
2%
Reviewers: chandlerc, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36199
llvm-svn: 309994
Summary:
Inlining threshold is increased by application of bonuses when the
callee has a single reachable basic block or is rich in vector
instructions. Similarly, inlining cost is reduced by applying a large
bonus when the last call to a static function is considered for
inlining. This patch disables the application of these bonuses when the
callsite or the callee is cold. The intention here is to prevent a large
cold callsite from being inlined to a non-cold caller that could prevent
the caller from being inlined. This is especially important when the
cold callsite is a last call to a static since the associated bonus is
very high.
Reviewers: chandlerc, davidxl
Subscribers: danielcdh, llvm-commits
Differential Revision: https://reviews.llvm.org/D35823
llvm-svn: 309441
Currently CallAnalyzer::isGEPFree uses TTI::getGEPCost to check if GEP is free.
TTI::getGEPCost cannot handle cases when GEPs participate in Def-Use dependencies
(see https://reviews.llvm.org/D31186 for example).
There is TTI::getUserCost which can calculate the cost more accurately by
taking dependencies into account.
Differential Revision: https://reviews.llvm.org/D33685
llvm-svn: 309268
Summary: visitSwitchInst should not take INT_MAX when Cost is negative. Instead of INT_MAX , we also use a valid upperbound cost when overflow occurs in Cost.
Reviewers: hans, echristo, dmgreen
Reviewed By: dmgreen
Subscribers: mcrosier, javed.absar, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D34436
llvm-svn: 306118
Summary:
This is to enable the new switch inline cost heuristic (r301649) by removing the
old heuristic as well as the flag itself.
In my experiment for LLVM test suite and spec2000/2006, +17.82% performance and
8% code size reduce was observed in spec2000/vertex with O3 LTO in AArch64.
No significant code size / performance regression was found in O3/O2/Os. No
significant complain was reported from the llvm-dev thread.
Reviewers: hans, chandlerc, eraman, haicheng, mcrosier, bmakam, eastig, ddibyend, echristo
Reviewed By: echristo
Subscribers: javed.absar, kristof.beyls, echristo, aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D32653
llvm-svn: 304594
Update threshold based on callee's hotness only when BFI is not available.
Otherwise use only callsite's hotness. This makes it easier to reason about
hotness related threshold updates.
Differential revision: https://reviews.llvm.org/D33157
llvm-svn: 303210
I ran the test-suite (including SPEC 2006) in PGO mode comparing cold
thresholds of 225 and 45. Here are some stats on the text size:
Out of 904 tests that ran, 197 see a change in text size. The average
text size reduction (of all the 904 binaries) is 1.07%. Of the 197
binaries, 19 see a text size increase, as high as 18%, but most of them
are small single source benchmarks. There are 3 multisource benchmarks
with a >0.5% size increase (0.7, 1.3 and 2.1 are their % increases). On
the other side of the spectrum, 31 benchmarks see >10% size reduction
and 6 of them are MultiSource.
I haven't run the test-suite with other values of inlinecold-threshold.
Since we have a cold callsite threshold of 45, I picked this value.
Differential revision: https://reviews.llvm.org/D33106
llvm-svn: 302829
Summary:
The motivation example is like below which has 13 cases but only 2 distinct targets
```
lor.lhs.false2: ; preds = %if.then
switch i32 %Status, label %if.then27 [
i32 -7012, label %if.end35
i32 -10008, label %if.end35
i32 -10016, label %if.end35
i32 15000, label %if.end35
i32 14013, label %if.end35
i32 10114, label %if.end35
i32 10107, label %if.end35
i32 10105, label %if.end35
i32 10013, label %if.end35
i32 10011, label %if.end35
i32 7008, label %if.end35
i32 7007, label %if.end35
i32 5002, label %if.end35
]
```
which is compiled into a balanced binary tree like this on AArch64 (similar on X86)
```
.LBB853_9: // %lor.lhs.false2
mov w8, #10012
cmp w19, w8
b.gt .LBB853_14
// BB#10: // %lor.lhs.false2
mov w8, #5001
cmp w19, w8
b.gt .LBB853_18
// BB#11: // %lor.lhs.false2
mov w8, #-10016
cmp w19, w8
b.eq .LBB853_23
// BB#12: // %lor.lhs.false2
mov w8, #-10008
cmp w19, w8
b.eq .LBB853_23
// BB#13: // %lor.lhs.false2
mov w8, #-7012
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_14: // %lor.lhs.false2
mov w8, #14012
cmp w19, w8
b.gt .LBB853_21
// BB#15: // %lor.lhs.false2
mov w8, #-10105
add w8, w19, w8
cmp w8, #9 // =9
b.hi .LBB853_17
// BB#16: // %lor.lhs.false2
orr w9, wzr, #0x1
lsl w8, w9, w8
mov w9, #517
and w8, w8, w9
cbnz w8, .LBB853_23
.LBB853_17: // %lor.lhs.false2
mov w8, #10013
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_18: // %lor.lhs.false2
mov w8, #-7007
add w8, w19, w8
cmp w8, #2 // =2
b.lo .LBB853_23
// BB#19: // %lor.lhs.false2
mov w8, #5002
cmp w19, w8
b.eq .LBB853_23
// BB#20: // %lor.lhs.false2
mov w8, #10011
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_21: // %lor.lhs.false2
mov w8, #14013
cmp w19, w8
b.eq .LBB853_23
// BB#22: // %lor.lhs.false2
mov w8, #15000
cmp w19, w8
b.ne .LBB853_3
```
However, the inline cost model estimates the cost to be linear with the number
of distinct targets and the cost of the above switch is just 2 InstrCosts.
The function containing this switch is then inlined about 900 times.
This change use the general way of switch lowering for the inline heuristic. It
etimate the number of case clusters with the suitability check for a jump table
or bit test. Considering the binary search tree built for the clusters, this
change modifies the model to be linear with the size of the balanced binary
tree. The model is off by default for now :
-inline-generic-switch-cost=false
This change was originally proposed by Haicheng in D29870.
Reviewers: hans, bmakam, chandlerc, eraman, haicheng, mcrosier
Reviewed By: hans
Subscribers: joerg, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D31085
llvm-svn: 301649
Sameer AbuAsal