The -check-debugify pass should preserve all analyses. Otherwise, it may
invalidate an optional analysis and inadvertently alter codegen.
The test case is reduced from deopt-bundle.ll. The result of `opt -O1`
on this file would differ when -debugify-each was toggled. That happened
because CheckDebugify failed to preserve GlobalsAA.
Thanks to Davide Italiano for his help chasing this down!
llvm-svn: 333959
Applying synthetic debug info before the bitcode writer pass has no
testing-related purpose. This commit prevents that from happening.
It also adds tests which check that IR produced with/without
-debugify-each enabled is identical after stripping. This makes it
possible to check that individual passes (or full pipelines) are
invariant to debug info.
llvm-svn: 333861
The -strip-module-flags option strips llvm.module.flags metadata from a
module at the beginning of the opt pipeline.
This will be used to test whether the output of a pass is debug info
(DI) invariant.
E.g, after applying synthetic debug info to a test case, we'd like to
strip out all DI-related metadata and check that the final IR is
identical to a baseline file without any DI applied, to check that
optimizations aren't inhibited by debug info.
llvm-svn: 333860
In r333801 I added a test for a dump method that, for reasons I don't
understand, fails on an msvc bot:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/12306/
I'll remove the test for now to unblock the bot and try to look into why
there's a discrepancy on this platform later.
llvm-svn: 333807
Summary:
"Unknown" for platforms that were not manually added into the switch
did not make sense at all. Now it prints Target + addend for all
elf-machines that were not explicitly mentioned.
Addresses PR21059 and PR25124.
Original author: fedor.sergeev
Reviewers: jyknight, espindola, fedor.sergeev
Reviewed By: jyknight
Subscribers: eraman, dcederman, jfb, dschuff, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D36464
llvm-svn: 333726
Setting the "Debug Info Version" module flag makes it possible to pipe
synthetic debug info into llc, which is useful for testing backends.
llvm-svn: 333237
When a GEP with all zero indices is converted to bitcast, its DI wasn't
copied over to the newly created instruction. This patch fixes that bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47347
llvm-svn: 333235
When a bitcast is being sunk in -codegenprepare pass, its DI wasn't
copied over to the newly created instruction. This patch fixes that
bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47282
llvm-svn: 333133
In DWARF v5, the DWO ID is in the (split/skeleton) CU header, not an
attribute on the CU DIE.
This changes the size of those headers, so use the parsed size whenever
we have one, for simplicitly.
Differential Revision: https://reviews.llvm.org/D47158
llvm-svn: 333004
Summary:
The correct spelling is "DWARF", the debugging format, not "DWARG".
The typo is in a (not executed by lit) comment in a test file, so
fixing it does not result in any functional change.
Test Plan: check-llvm, just in case
llvm-svn: 332878
Rather than relying on the user to do the address calculating in
DW_AT_location we should just dump the absolute address.
rdar://problem/38513870
Differential revision: https://reviews.llvm.org/D47152
llvm-svn: 332873
This reapplies commits: r330271, r330592, r330779.
[DEBUG] Initial adaptation of NVPTX target for debug info emission.
Summary:
Patch adds initial emission of the debug info for NVPTX target.
Currently, only .file and .loc directives are emitted, everything else is
commented out to not break the compilation of Cuda.
llvm-svn: 332689
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
llvm-svn: 332669
The prefix includes type kind, which is important to preserve. Two
different type leafs can easily have the same interior record contents
as another type.
We ran into this issue in PR37492 where a bitfield type record collided
with a const modifier record. Their contents were bitwise identical, but
their kinds were different.
llvm-svn: 332664
Currently debugify prints it's output to stdout,
with this patch all the output generated goes to stderr.
This change lets us use debugify without taking away
the ability to pipe the output to other llvm tools.
llvm-svn: 332642
In post-commit review for r332416, Paul Robinson pointed out that the
test for -debugify-each is not checking what it needs to.
This commit tightens up the test.
llvm-svn: 332497
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
llvm-svn: 332312
Summary:
If we are not emitting a linkage name in the .debug_info sections, we
should not add it into the index either. This makes sure our index is
consistent with the actual debug info.
I am also explicitly setting the --dwarf-linkage-names=All in the
name-collsions test as that one would now fail on targets where this
defaults to "Abstract" (in fact, it would have failed already if there
wasn't a bug in the DWARF verifier, which I fix as well).
Reviewers: probinson, aprantl, JDevlieghere
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46748
llvm-svn: 332246
length excluding the table header. Instead it must encode the contribution length minus the length
field itself.
Reviewer: JDevliegehere
Differential Revision: https://reviews.llvm.org/D45922
llvm-svn: 332030
Summary: The final -wasm component has been the default for some time now.
Subscribers: jfb, dschuff, jgravelle-google, eraman, aheejin, JDevlieghere, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D46342
llvm-svn: 332007
Reviewed by: dblaikie, JDevlieghere, espindola
Differential Revision: https://reviews.llvm.org/D44560
Summary:
The .debug_line parser previously reported errors by printing to stderr and
return false. This is not particularly helpful for clients of the library code,
as it prevents them from handling the errors in a manner based on the calling
context. This change switches to using llvm::Error and callbacks to indicate
what problems were detected during parsing, and has updated clients to handle
the errors in a location-specific manner. In general, this means that they
continue to do the same thing to external users. Below, I have outlined what
the known behaviour changes are, relating to this change.
There are two levels of "errors" in the new error mechanism, to broadly
distinguish between different fail states of the parser, since not every
failure will prevent parsing of the unit, or of subsequent unit. Malformed
table errors that prevent reading the remainder of the table (reported by
returning them) and other minor issues representing problems with parsing that
do not prevent attempting to continue reading the table (reported by calling a
specified callback funciton). The only example of this currently is when the
last sequence of a unit is unterminated. However, I think it would be good to
change the handling of unrecognised opcodes to report as minor issues as well,
rather than just printing to the stream if --verbose is used (this would be a
subsequent change however).
I have substantially extended the DwarfGenerator to be able to handle
custom-crafted .debug_line sections, allowing for comprehensive unit-testing
of the parser code. For now, I am just adding unit tests to cover the basic
error reporting, and positive cases, and do not currently intend to test every
part of the parser, although the framework should be sufficient to do so at a
later point.
Known behaviour changes:
- The dump function in DWARFContext now does not attempt to read subsequent
tables when searching for a specific offset, if the unit length field of a
table before the specified offset is a reserved value.
- getOrParseLineTable now returns a useful Error if an invalid offset is
encountered, rather than simply a nullptr.
- The parse functions no longer use `WithColor::warning` directly to report
errors, allowing LLD to call its own warning function.
- The existing parse error messages have been updated to not specifically
include "warning" in their message, allowing consumers to determine what
severity the problem is.
- If the line table version field appears to have a value less than 2, an
informative error is returned, instead of just false.
- If the line table unit length field uses a reserved value, an informative
error is returned, instead of just false.
- Dumping of .debug_line.dwo sections is now implemented the same as regular
.debug_line sections.
- Verbose dumping of .debug_line[.dwo] sections now prints the prologue, if
there is a prologue error, just like non-verbose dumping.
As a helper for the generator code, I have re-added emitInt64 to the
AsmPrinter code. This previously existed, but was removed way back in r100296,
presumably because it was dead at the time.
This change also requires a change to LLD, which will be committed separately.
llvm-svn: 331971
Make these two test cases more generic for other architectures.
Please refer to '[DebugInfo] Convert intrinsic llvm.dbg.label to
MachineInstr.'
Patch by Hsiangkai Wang
llvm-svn: 331853
Please refer to '[DebugInfo] Add DILabel metadata and intrinsic
llvm.dbg.label'. I have renamed the 'variables' attributes to
'retainedNodes' to include local variables and local labels for the
function.
Patch by Hsiangkai Wang.
llvm-svn: 331848
In order to convert LLVM IR to MachineInstr, we need a new TargetOpcode,
DBG_LABEL, to ‘lower’ intrinsic llvm.dbg.label. The patch
creates this new TargetOpcode and convert intrinsic llvm.dbg.label to
MachineInstr through SelectionDAG.
In SelectionDAG, debug information is stored in SDDbgInfo. We create a
new data member of SDDbgInfo for labels and use the new data member,
SDDbgLabel, to create DBG_LABEL MachineInstr.
The new DBG_LABEL MachineInstr uses label metadata from LLVM IR as its
parameter. So, the backend could get metadata information of labels from
DBG_LABEL MachineInstr.
Differential Revision: https://reviews.llvm.org/D45341
Patch by Hsiangkai Wang.
llvm-svn: 331842
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Before SVN r244158, codeview debug info was emitted always
emitted for msvc if debug info was enabled, but that commit
added a module flag.
Since it's still restricted by the flag, we can allow it
for any target if the user requests it, not only msvc (and
windows-itanium, added in SVN r287567).
Add a test for emitting it for a mingw target.
Differential Revision: https://reviews.llvm.org/D46303
llvm-svn: 331809
Summary:
getNode optimizes (ext (trunc x)) to x and the dbgvalue node on trunc is lost. The fix calls transferDbgValues to add the dbgvalue to x.
Add DebugInfo/AArch64/dbg-value-i16.ll
Patch by Sejong Oh!
Reviewers: aprantl, javed.absar, llvm-commits, vsk
Reviewed By: aprantl, vsk
Subscribers: kristof.beyls, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46348
llvm-svn: 331665
Summary:
This reverts SVN r331441 (reapplies r331337), together with a fix
in to handle an already existing fragment expression in the
dbg.value that must be fragmented due to a split PHI node.
This should solve the problem seen in PR37321, which was the
reason for the revert of r331337.
The situation in PR37321 is that we have a PHI node like this
%u.sroa = phi i80 [ %u.sroa.x, %if.x ],
[ %u.sroa.y, %if.y ],
[ %u.sroa.z, %if.z ]
and a dbg.value like this
call void @llvm.dbg.value(metadata i80 %u.sroa,
metadata !13,
metadata !DIExpression(DW_OP_LLVM_fragment, 0, 80))
The phi node is split into three 32-bit PHI nodes
%30:gr32 = PHI %11:gr32, %bb.4, %14:gr32, %bb.5, %27:gr32, %bb.8
%31:gr32 = PHI %12:gr32, %bb.4, %15:gr32, %bb.5, %28:gr32, %bb.8
%32:gr32 = PHI %13:gr32, %bb.4, %16:gr32, %bb.5, %29:gr32, %bb.8
but since the original value only is 80 bits we need to adjust the size
of the last fragment expression, and with this patch we get
DBG_VALUE debug-use %30:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 0, 32)
DBG_VALUE debug-use %31:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 32, 32)
DBG_VALUE debug-use %32:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 64, 16)
Reviewers: vsk, aprantl, mstorsjo
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46384
llvm-svn: 331464
Summary:
This is a follow up to rL331182. A PHI node can be split up into
several MIR PHI nodes when being selected. When there is a
dbg.value intrinsic that uses the result of such a PHI node we
need to select several DBG_VALUE instructions, with fragment
expressions, in order to do a correct selection.
Reviewers: rnk, aprantl, vsk
Reviewed By: vsk
Subscribers: mattd, llvm-commits, JDevlieghere, aprantl, gbedwell, rnk
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D46329
llvm-svn: 331337
LLVM always puts function definition DIEs at the top level, but under
some circumstances GCC does not (at least in this case with member
functions of a function-local type).
To ensure that doesn't appear as though the local type's member function
is unduly inlined within the outer function - ensure the inline
discovery DIE parent walk stops at the first DW_TAG_subprogram.
llvm-svn: 331291
This appears to have some issues associated with the file directive output
causing multiple global symbols with the name "file" to be emitted into a
startup section. I'm investigating more specific causes and working with the
original author.
This reverts commit r330271.
Also Revert "[DEBUGINFO, NVPTX] Add the test for the debug info of the local"
This reverts commit r330592 and the follow up of 330779 as the testcase is dependent upon r330271.
llvm-svn: 331237
Summary:
This patch will introduce copying of DBG_VALUE instructions
from an otherwise empty basic block to predecessor/successor
blocks in case the empty block is eliminated/bypassed. It
is currently only done in one identified situation in the
BranchFolding pass, before optimizing on empty block.
It can be seen as a light variant of the propagation done
by the LiveDebugValues pass, which unfortunately is executed
after the BranchFolding pass.
We only propagate (copy) DBG_VALUE instructions in a limited
number of situations:
a) If the empty BB is the only predecessor of a successor
we can copy the DBG_VALUE instruction to the beginning of
the successor (because the DBG_VALUE instruction is always
part of the flow between the blocks).
b) If the empty BB is the only successor of a predecessor
we can copy the DBG_VALUE instruction to the end of the
predecessor (because the DBG_VALUE instruction is always
part of the flow between the blocks). In this case we add
the DBG_VALUE just before the first terminator (assuming
that the terminators do not impact the DBG_VALUE).
A future solution, to handle more situations, could perhaps
be to run the LiveDebugValues pass before branch folding?
This fix is related to PR37234. It is expected to resolve
the problem seen, when applied together with the fix in
SelectionDAG from here: https://reviews.llvm.org/D46129
Reviewers: #debug-info, aprantl, rnk
Reviewed By: #debug-info, aprantl
Subscribers: ormris, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46184
llvm-svn: 331183
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
This reapplies r330970 after fixing an uncovered bug in r331086 and
working around the situation caused by it.
llvm-svn: 331090
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
llvm-svn: 330970
Debug var, expr and loc were only supported for non-fixed stack objects.
This patch adds the following fields to the "fixedStack:" entries, and
renames the ones from "stack:" to:
* debug-info-variable
* debug-info-expression
* debug-info-location
Differential Revision: https://reviews.llvm.org/D46032
llvm-svn: 330859
Updated two more debug line related warnings to use WithColor. This was
necessary to ensure consistent output order of the warnings on Windows
for debug line tests.
Differential Revision: https://reviews.llvm.org/D45871
llvm-svn: 330440
On Windows, %llc_dwarf automatically adds -mtriple causing this test to
error. Changed %llc_dwarf to llc.
Differential Revision: https://reviews.llvm.org/D45869
llvm-svn: 330414
Summary:
Patch adds initial emission of the debug info for NVPTX target.
Currently, only .file and .loc directives are emitted, everything else is
commented out to not break the compilation of Cuda.
Reviewers: echristo, jlebar, tra, jholewinski
Subscribers: mgorny, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41827
llvm-svn: 330271
It seems llc crashes when targetting darwin with split-dwarf (pr37164).
This happens on all inputs, not just the one I added in the above
commit. Work around the issue by hardcoding the target triple to linux,
which is what all split-dwarf tests seem to be doing.
As I don't know of a way to specify the os part of the triple without
spelling out the architecture as well, I move the new test to the X86
folder.
llvm-svn: 330265
Summary:
Previously we crashed for the combination of the two features because we
tried to reference the dwo CU from the main object file. The fix
consists of two items:
- reference the skeleton CU from the name index (the consumer is
expected to use the skeleton CU to find the real data).
- use the main object file string pool for the strings in the index
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45566
llvm-svn: 330249
Summary:
When sinking an instruction in InstCombine we now also sink
the DbgInfoIntrinsics that are using the sunken value.
Example)
When sinking the load in this input
bb.X:
%0 = load i64, i64* %start, align 4, !dbg !31
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
br label %for.body
we now also move the dbg.value, like this
bb.X:
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
%0 = load i64, i64* %start, align 4, !dbg !31
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br label %for.body
In the past we haven't moved the dbg.value so we got
bb.X:
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
%0 = load i64, i64* %start, align 4, !dbg !31
br label %for.body
So in the past we got a debug-use before the def of %0.
And that dbg.value was also on the path jumping to %for.end, for
which %0 never was defined.
CodeGenPrepare normally comes to rescue later (when not moving
the dbg.value), since it moves dbg.value instrinsics quite
brutally, without really analysing if it is correct to move
the intrinsic (see PR31878).
So at the moment this patch isn't expected to have much impact,
besides that it is moving the dbg.value already in opt, making
the IR look more sane directly.
This can be seen as a preparation to (hopefully) make it possible
to turn off CodeGenPrepare::placeDbgValues later as a solution
to PR31878.
I also adjusted test/DebugInfo/X86/sdagsplit-1.ll to make the
IR in the test case up-to-date with this behavior in InstCombine.
Reviewers: rnk, vsk, aprantl
Reviewed By: vsk, aprantl
Subscribers: mattd, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D45425
llvm-svn: 330243
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
llvm-svn: 330208
Apparently, DebugInfoFinder::processCompileUnit doesn't process all
of the possible kinds of DIImportedEntit'ies, e.g. DIGlobalVariable's.
Previously introduced `llvm_unreachable` is therefore incorrect.
Removing it here.
llvm-svn: 330167
When emitting CodeView debug information, compiler-generated thunk routines
should be emitted using S_THUNK32 symbols instead of S_GPROC32_ID symbols so
Visual Studio can properly step into the user code. This initial support only
handles standard thunk ordinals.
Differential Revision: https://reviews.llvm.org/D43838
llvm-svn: 330132
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
This lifts a restriction on DILocation::getMergedLocation(), allowing it
to create merged locations for instructions other than calls.
Instruction::applyMergedLocation() now defaults to creating merged
locations for all instructions.
The default behavior of getMergedLocation() is unchanged: callers which
invoke it directly are unaffected.
This change will enable a follow-up Mem2Reg fix which improves crash
reporting.
Differential Revision: https://reviews.llvm.org/D45396
llvm-svn: 329955
Most importantly, we should not replace slashes with backslashes
because that would invalidate the path.
Differential Revision: https://reviews.llvm.org/D45473
llvm-svn: 329838
This is causing compilation timeouts on code with long sequences of
local values and calls (i.e. foo(1); foo(2); foo(3); ...). It turns out
that code coverage instrumentation is a great way to create sequences
like this, which how our users ran into the issue in practice.
Intel has a tool that detects these kinds of non-linear compile time
issues, and Andy Kaylor reported it as PR37010.
The current sinking code scans the whole basic block once per local
value sink, which happens before emitting each call. In theory, local
values should only be introduced to be used by instructions between the
current flush point and the last flush point, so we should only need to
scan those instructions.
llvm-svn: 329822
Summary:
This type is created on-demand and used as the base type for array
ranges. Since it is "special", its construction did not go through the
createTypeDIE function and so it was never inserted into the accelerator
table, although it clearly belongs there.
I add an explicit addAccelType call to insert it into the table.
During review, we also decided to rename the type to something more
unique to avoid confusion in case the user has own "sizetype" type. The
new name for the type size __ARRAY_SIZE_TYPE__.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45445
llvm-svn: 329705
Summary:
If an input DICompileUnit is completely empty (e.g., the result of
running "clang -g" on an empty file), we don't bother emitting an empty
DWARF CU. When we do that, we must make sure we don't also emit a DWARF v5
name index, as DWARF specifies that each index must reference at least
one compilation unit.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45435
llvm-svn: 329575
- when tuning for SCE debugger (default for ps4 targets), we will not emit
the DW_AT_linkage_name, which this test needs. I explicitly set the
debugger tuning parameter to get the attribute always.
- darwin targets did not like the "section .text.startup" fragment of
the test. This is not actually needed for the test, so I remove it.
llvm-svn: 329555
Summary:
We were emitting accelerator entries for functions with no name, which
is contrary to the DWARF v5 spec: "All other (i.e., *not*
DW_TAG_namespace) debugging information entries without a DW_AT_name
attribute are excluded." Besides that, a name table entry with an empty
string as a key is fairly useless.
We can sometimes end up with functions which have a DW_AT_linkage_name but no
DW_AT_name. One such example is the global-constructor-initialization functions,
which C++ compilers synthesize for each compilation unit with global
constructors.
A very strict reading of the DWARF v5 spec would suggest that we should not even
emit the accelerator entry for the linkage name in this case, but I don't think
we should go that far.
I found this when running the dwarf verifier over llvm codebase compiled
with DWARF v5 accelerator tables.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: vleschuk, clayborg, echristo, probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45367
llvm-svn: 329552
- MSVC was not OK with a static_assert referencing a non-static member
variable, even though it was just in a sizeof(expression). I move the
assert into the emit function, where it is probably more useful.
- Tests were failing in builds which did not have the X86 target
configured. Since this functionality is not target-specific, I have
removed the target specifiers from the .ll files.
llvm-svn: 329201
Summary:
This patch adds a DwarfAccelTableEmitter class, which generates an
accelerator table, as specified in DWARF v5 standard. At the moment it
only generates a DIE offset column and (if we are indexing more than one
compile unit) a CU column.
Indexing type units is not currently supported, as we don't even have
the ability to generate DWARF v5-compatible compile units.
The implementation is not data-source agnostic like the one generating
apple tables. This was not necessary as we currently only have one user
of this code, and without a second user it was not obvious to me how to
best abstract this. (The difference between these tables and the apple
ones is that they need a lot more metadata about the debug info they are
indexing).
The generation is triggered by the --accel-tables argument, which
supersedes the --dwarf-accel-tables arg -- the latter was a simple
on-off switch, but not we can choose between two kinds of accelerator
tables we can generate.
This is tested by parsing the generated tables with llvm-dwarfdump and
the DWARFVerifier, and I've also checked that GNU readelf is able to
make sense of the tables.
Differential Revision: https://reviews.llvm.org/D43286
llvm-svn: 329179
Summary:
Some targets do not support extended format of .loc directive and
support only simple format: .loc <FileID> <Line> <Column>. Patch adds
MCAsmInfo flag and option that allows emit .loc directive without
additional flags.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45184
llvm-svn: 329089
There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
llvm-svn: 328812
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
Before this patch we were parsing the attributes as section offsets, as
that is what apple_names is doing. However, this is not correct as DWARF
v5 specifies that this attribute should use the Reference form class.
This also updates all the testcases (except the ones that deliberately
pass a different form) to use the correct form class.
llvm-svn: 328773
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328676
On Hexagon "x = y" is a syntax used in most instructions, and is not
treated as a directive.
Differential Revision: https://reviews.llvm.org/D44256
llvm-svn: 328635
Summary:
Some targets does not support labels inside debug sections, but support
references in form `section+offset`. Patch adds initial support
for this.
Reviewers: echristo, probinson, jlebar
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43943
llvm-svn: 328314
Summary:
This pass sinks COPY instructions into a successor block, if the COPY is not
used in the current block and the COPY is live-in to a single successor
(i.e., doesn't require the COPY to be duplicated). This avoids executing the
the copy on paths where their results aren't needed. This also exposes
additional opportunites for dead copy elimination and shrink wrapping.
These copies were either not handled by or are inserted after the MachineSink
pass. As an example of the former case, the MachineSink pass cannot sink
COPY instructions with allocatable source registers; for AArch64 these type
of copy instructions are frequently used to move function parameters (PhyReg)
into virtual registers in the entry block..
For the machine IR below, this pass will sink %w19 in the entry into its
successor (%bb.1) because %w19 is only live-in in %bb.1.
```
%bb.0:
%wzr = SUBSWri %w1, 1
%w19 = COPY %w0
Bcc 11, %bb.2
%bb.1:
Live Ins: %w19
BL @fun
%w0 = ADDWrr %w0, %w19
RET %w0
%bb.2:
%w0 = COPY %wzr
RET %w0
```
As we sink %w19 (CSR in AArch64) into %bb.1, the shrink-wrapping pass will be
able to see %bb.0 as a candidate.
With this change I observed 12% more shrink-wrapping candidate and 13% more dead copies deleted in spec2000/2006/2017 on AArch64.
Reviewers: qcolombet, MatzeB, thegameg, mcrosier, gberry, hfinkel, john.brawn, twoh, RKSimon, sebpop, kparzysz
Reviewed By: sebpop
Subscribers: evandro, sebpop, sfertile, aemerson, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41463
llvm-svn: 328237
This is mostly just plumbing to get a DWARFDataExtractor where we
compute abbr_offset so we can use getRelocatedValue.
This is part of PR36793.
llvm-svn: 328154
Summary:
When building the selection DAG we sometimes need to postpone
the handling of a dbg.value until the value it should refer to
is created. This is done by using the DanglingDebugInfoMap.
In the past this map has been limited to hold one dangling
dbg.value per value. This patch removes that restriction.
Reviewers: aprantl, rnk, probinson, vsk
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44610
llvm-svn: 328084
Summary:
Added a flag -no-dwarf-pub-sections, which allows to disable
emission of DWARF public sections.
Reviewers: probinson, echristo
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D44385
llvm-svn: 327994
Summary:
DbgValue nodes were not transferred when integer DAG nodes were promoted. For example, if an i32 add node was promoted to an i64 add node by DAGTypeLegalizer::PromoteIntegerResult(), its DbgValue node was not transferred to the new node. The simple fix is to update SetPromotedInteger() to transfer DbgValues.
Add AArch64/dbg-value-i8.ll to test this change and fix ARM/debug-info-d16-reg.ll which had the wrong DILocalVariable nodes with arg numbers even though they are not for function parameters.
Patch by Se Jong Oh!
Reviewers: vsk, JDevlieghere, aprantl
Reviewed By: JDevlieghere
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44546
llvm-svn: 327919
Now that almost all functionality of Apple's dsymutil has been
upstreamed, the open source variant can be used as a drop in
replacement. Hence we feel it's no longer necessary to have the llvm
prefix.
Differential revision: https://reviews.llvm.org/D44527
llvm-svn: 327790
This patch sorts local variables by lexical scope and emits them inside
an appropriate S_BLOCK32 CodeView symbol.
Differential Revision: https://reviews.llvm.org/D42926
llvm-svn: 327620
Summary:
Local values are constants, global addresses, and stack addresses that
can't be folded into the instruction that uses them. For example, when
storing the address of a global variable into memory, we need to
materialize that address into a register.
FastISel doesn't want to materialize any given local value more than
once, so it generates all local value materialization code at
EmitStartPt, which always dominates the current insertion point. This
allows it to maintain a map of local value registers, and it knows that
the local value area will always dominate the current insertion point.
The downside is that local value instructions are always emitted without
a source location. This is done to prevent jumpy line tables, but it
means that the local value area will be considered part of the previous
statement. Consider this C code:
call1(); // line 1
++global; // line 2
++global; // line 3
call2(&global, &local); // line 4
Today we end up with assembly and line tables like this:
.loc 1 1
callq call1
leaq global(%rip), %rdi
leaq local(%rsp), %rsi
.loc 1 2
addq $1, global(%rip)
.loc 1 3
addq $1, global(%rip)
.loc 1 4
callq call2
The LEA instructions in the local value area have no source location and
are treated as being on line 1. Stepping through the code in a debugger
and correlating it with the assembly won't make much sense, because
these materializations are only required for line 4.
This is actually problematic for the VS debugger "set next statement"
feature, which effectively assumes that there are no registers live
across statement boundaries. By sinking the local value code into the
statement and fixing up the source location, we can make that feature
work. This was filed as https://bugs.llvm.org/show_bug.cgi?id=35975 and
https://crbug.com/793819.
This change is obviously not enough to make this feature work reliably
in all cases, but I felt that it was worth doing anyway because it
usually generates smaller, more comprehensible -O0 code. I measured a
0.12% regression in code generation time with LLC on the sqlite3
amalgamation, so I think this is worth doing.
There are some special cases worth calling out in the commit message:
1. local values materialized for phis
2. local values used by no-op casts
3. dead local value code
Local values can be materialized for phis, and this does not show up as
a vreg use in MachineRegisterInfo. In this case, if there are no other
uses, this patch sinks the value to the first terminator, EH label, or
the end of the BB if nothing else exists.
Local values may also be used by no-op casts, which adds the register to
the RegFixups table. Without reversing the RegFixups map direction, we
don't have enough information to sink these instructions.
Lastly, if the local value register has no other uses, we can delete it.
This comes up when fastisel tries two instruction selection approaches
and the first materializes the value but fails and the second succeeds
without using the local value.
Reviewers: aprantl, dblaikie, qcolombet, MatzeB, vsk, echristo
Subscribers: dotdash, chandlerc, hans, sdardis, amccarth, javed.absar, zturner, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43093
llvm-svn: 327581
Make sure that DWARF line information generated by Windows can be properly read by Posix OS and vice versa.
Differential Revision: https://reviews.llvm.org/D44290
llvm-svn: 327430
Codeview references to unnamed structs and unions are expected to refer to the
complete type definition instead of a forward reference so Visual Studio can
resolve the type properly.
Differential Revision: https://reviews.llvm.org/D32498
llvm-svn: 327397
Summary:
1) Make sure to discard dangling debug info if the variable (or
variable fragment) is mapped to something new before we had a
chance to resolve the dangling debug info.
2) When resolving debug info, make sure to bump the associated
SDNodeOrder to ensure that the DBG_VALUE is emitted after the
instruction that defines the value used in the DBG_VALUE.
This will avoid a debug-use before def scenario as seen in
https://bugs.llvm.org/show_bug.cgi?id=36417.
The new test case, test/DebugInfo/X86/sdag-dangling-dbgvalue.ll,
show some other limitations in how dangling debug info is
handled in the SelectionDAG. Since we currently only support
having one dangling dbg.value per Value, we will end up dropping
debug info when there are more than one variable that is described
by the same "dangling value".
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: aprantl, eraman, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44369
llvm-svn: 327303
There is no point in lowering a dbg.declare describing an alloca that
has volatile loads or stores as users, since the alloca cannot be
elided. Lowering the dbg.declare will result in larger debug info that
may also have worse coverage than just describing the alloca.
rdar://problem/34496278
llvm-svn: 327092
Summary:
This patch adds the DW_AT_byte_size dwarf attribute to vectors.
This fixes PR21924
LLVM will round a vector up to the next alignable address, which can result in
the vector's representation in the object file being larger than what the
debugger will calculate via NumberOfElements * ElementSize. In such a case calling sizeof(MyVec) in the source will result in a different value than what a debugger might present. This situation can occur because LLVM permits non-power of two 'vector_size' attributes.
Reviewers: echristo, dexonsmith, aprantl
Reviewed By: aprantl
Subscribers: probinson, aprantl, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44048
llvm-svn: 327072
Instead of only printing the CU-relative offset in non-verbose mode, it
makes more sense to only printed the resolved address. In verbose mode
we still print both.
Differential revision: https://reviews.llvm.org/D44148
rdar://33525475
llvm-svn: 326903
Fixes the bug found by asan. Also XFAIL the new test for Darwin,
which is stuck on DWARF v2, and fix up other tests so they stop
failing on Windows.
llvm-svn: 326839
Summary:
- Emit UdtSourceLine information for enums to match MSVC
- Add a method to add UDTSrcLine and call it for all Class/Struct/Union/Enum
- Update test cases to verify the changes
Reviewers: zturner, llvm-commits, rnk
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D44116
llvm-svn: 326824
Summary:
This is a workaround for pr36417
https://bugs.llvm.org/show_bug.cgi?id=36417
LiveDebugVariables will now verify that the DBG_VALUE instructions
are sane (prior to register allocation) by asking LIS if a virtual
register used in the DBG_VALUE is live (or dead def) in the slot
index before the DBG_VALUE. If it isn't sane the DBG_VALUE is
discarded.
One pass that was identified as introducing non-sane DBG_VALUE
instructtons, when analysing pr36417, was the DAG->DAG Instruction
Selection. It sometimes inserts DBG_VALUE instructions referring to
a virtual register that is defined later in the same basic block.
So it is a use before def kind of problem. The DBG_VALUE is
typically inserted in the beginning of a basic block when this
happens. The problem can be seen in the test case
test/DebugInfo/X86/dbg-value-inlined-parameter.ll
Reviewers: aprantl, rnk, probinson
Reviewed By: aprantl
Subscribers: vsk, davide, alexcrichton, Ka-Ka, eraman, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43956
llvm-svn: 326769
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 326758
The fast/linear DAG scheduler doesn't lower DBG_VALUEs except for
function entry nodes.
Patch by Joshua Cranmer!
Differential Revision: https://reviews.llvm.org/D43028
llvm-svn: 326631
Masking first, prevents the extend from being combine with loads. Its also interfering with some vXi1 extraction code.
Differential Revision: https://reviews.llvm.org/D42679
llvm-svn: 326500
Summary:
Some targets does not support labels inside debug sections, but support
references in form `section +|- offset`. Patch adds initial support
for this. Also, this patch disables emission of all additional debug
sections that may have labels inside of it (like pub sections and
string tables).
Reviewers: probinson, echristo
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D43627
llvm-svn: 326328
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
llvm-svn: 326260
When attempting to compile the following Objective-C++ code with
CodeView debug info:
void (^b)(void) = []() {};
The generated debug metadata contains a structure like the following:
!43 = !DICompositeType(tag: DW_TAG_structure_type, name: "__block_literal_1", scope: !6, file: !6, line: 1, size: 168, elements: !44)
!44 = !{!45, !46, !47, !48, !49, !52}
...
!52 = !DIDerivedType(tag: DW_TAG_member, scope: !6, file: !6, line: 1, baseType: !53, size: 8, offset: 160, flags: DIFlagPublic)
!53 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !54)
!54 = !DICompositeType(tag: DW_TAG_class_type, file: !6, line: 1, flags: DIFlagFwdDecl)
Note that the member node (!52) is unnamed, but rather than pointing to
a DICompositeType directly, it points to a DIDerivedType with tag
DW_TAG_const_type, which then points to the DICompositeType. However,
the CodeView assembly printer currently assumes that the base type for
an unnamed member will always be a DICompositeType, and attempts to
perform that cast, which triggers an assertion failure, since in this
case the base type is actually a DIDerivedType, not a DICompositeType
(and we would have to get the base type of the DIDerivedType to reach
the DICompositeType). I think the debug metadata being generated by the
frontend is correct (or at least plausible), and the CodeView printer
needs to handle this case.
This patch teaches the CodeView printer to unwrap any qualifier types.
The qualifiers are just dropped for now. Ideally, they would be applied
to the added indirect members instead, but this occurs infrequently
enough that adding the logic to handle the qualifiers correctly isn't
worth it for now. A FIXME is added to note this.
Additionally, Reid pointed out that the underlying assumption that an
unnamed member must be a composite type is itself incorrect and may not
hold for all frontends. Therefore, after all qualifiers have been
stripped, check if the resulting type is in fact a DICompositeType and
just return if it isn't, rather than assuming the type and crashing if
that assumption is violated.
Differential Revision: https://reviews.llvm.org/D43803
llvm-svn: 326255
Re-enable commit r323991 now that r325931 has been committed to make
MachineOperand::isRenamable() check more conservative w.r.t. code
changes and opt-in on a per-target basis.
llvm-svn: 326208
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
This patch reverts r325440 and r325438 because it triggers an
assertion in SelectionDAGBuilder.cpp. Also having debug enabled
may unintentionally affect code-gen. The patch is reverted until
we find a better solution.
llvm-svn: 325825
Summary:
If there is no debug info for macros, do not emit labels for empty
macinfo sections.
Reviewers: probinson, echristo
Subscribers: aprantl, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43589
llvm-svn: 325803
Summary:
https://llvm.org/PR36263 shows that when compiling at -O0 a dbg.value()
instruction (that remains from an original dbg.declare()) is dropped
by FastISel. Since FastISel selects instructions by iterating a basic
block backwards, it drops the dbg.value if one of its operands is not
yet instantiated by a previously selected instruction.
Instead of calling 'lookUpRegForValue()' we can call 'getRegForValue()'
instead that will insert a placeholder for the operand to be filled in
when continuing the instruction selection.
Reviewers: aprantl, dblaikie, probinson
Reviewed By: aprantl
Subscribers: llvm-commits, dstenb, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43386
llvm-svn: 325438
Summary:
The assert for a DISubrange's CountVarDIE to be available fails
when the dbg.value() has been optimized away for any reason.
Having the assert for that is a little heavy, so instead removing
it now in favor of not generating the 'count' expression.
Addresses http://llvm.org/PR36263 .
Reviewers: aprantl, dblaikie, probinson
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits, dstenb
Differential Revision: https://reviews.llvm.org/D43387
llvm-svn: 325427
This reverts commit r323991.
This commit breaks target that don't model all the register constraints
in TableGen. So far the workaround was to set the
hasExtraXXXRegAllocReq, but it proves that it doesn't cover all the
cases.
For instance, when mutating an instruction (like in the lowering of
COPYs) the isRenamable flag is not properly updated. The same problem
will happen when attaching machine operand from one instruction to
another.
Geoff Berry is working on a fix in https://reviews.llvm.org/D43042.
llvm-svn: 325421
The prologue-end line record must be emitted after the last
instruction that is part of the function frame setup code and before
the instruction that marks the beginning of the function body.
Patch by Carlos Alberto Enciso!
Differential Revision: https://reviews.llvm.org/D41762
llvm-svn: 325143
If a function doesn't have an exact definition, don't apply debugify
metadata as it triggers a DIVerifier failure.
The issue is that it's invalid to have DILocations inside a DISubprogram
which isn't a definition ("scope points into the type hierarchy!").
llvm-svn: 325036
Instead of reserving 0xF00 bytes for the fixed length portion of the CodeView
symbol name, calculate the actual length of the fixed length portion.
Differential Revision: https://reviews.llvm.org/D42125
llvm-svn: 324850
This addresses review feedback for D42940. The topological sort is
slightly more expensive but it can now also detect cycles in the
dependencies and actually works correctly.
rdar://problem/37217988
Differential Review: https://reviews.llvm.org/D43036
llvm-svn: 324677
Emitting the correct (root of compilation) file at index 0 will be
posted for review later; I wanted to get this minor change out of the
way first.
llvm-svn: 324669
This patch is the LLVM part of fixing the issues, described in
https://bugs.llvm.org/show_bug.cgi?id=36168
* The representation of enumerator values in the debug info metadata now
contains a boolean flag isUnsigned, which determines how the bits of
the value are interpreted.
* The DW_TAG_enumeration type DIE now always (for DWARF version >= 3)
includes a DW_AT_type attribute, which refers to the underlying
integer type, as suggested in DWARFv4 (5.7 Enumeration Type Entries).
* The debug info metadata for enumeration type contains (in flags)
indication whether this is a C++11 "fixed enum".
* For C++11 enumeration with a fixed underlying type, the DIE also
includes the DW_AT_enum_class attribute (for DWARF version >= 4).
* Encoding of enumerator constants uses DW_FORM_sdata for signed values
and DW_FORM_udata for unsigned values, as suggested by DWARFv4 (7.5.4
Attribute Encodings).
The changes should be backwards compatible:
* the isUnsigned attribute is optional and defaults to false.
* if the underlying type for the enumeration is not available, the
enumerator values are considered signed.
* the FixedEnum flag defaults to clear.
* the bitcode format for DIEnumerator stores the unsigned flag bit #1 of
the first record element, so the format does not change and the zero
previously stored there is consistent with the false default for
IsUnsigned.
Differential Revision: https://reviews.llvm.org/D42734
llvm-svn: 324489
n Rust, an enum that carries data in the variants is, essentially, a
discriminated union. Furthermore, the Rust compiler will perform
space optimizations on such enums in some situations. Previously,
DWARF for these constructs was emitted using a hack (a magic field
name); but this approach stopped working when more space optimizations
were added in https://github.com/rust-lang/rust/pull/45225.
This patch changes LLVM to allow discriminated unions to be
represented in DWARF. It adds createDiscriminatedUnionType and
createDiscriminatedMemberType to DIBuilder and then arranges for this
to be emitted using DWARF's DW_TAG_variant_part and DW_TAG_variant.
Note that DWARF requires that a discriminated union be represented as
a structure with a variant part. However, as Rust only needs to emit
pure discriminated unions, this is what I chose to expose on
DIBuilder.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D42082
llvm-svn: 324426
VLAs may refer to a previous DIE to express the DW_AT_count of their
type. Clang generates an artificial "vla_expr" variable for this. If
this DIE hasn't been created yet LLVM asserts. This patch fixes this
by sorting the local variables so that dependencies come before they
are needed. It also replaces the linear scan in DWARFFile with a
std::map, which can be faster.
Differential Revision: https://reviews.llvm.org/D42940
llvm-svn: 324412
The major visible difference here is that in line-table dumps,
directory and file names are wrapped in double-quotes; previously,
directory names got single quotes and file names were not quoted at
all.
The improvement in this patch is that when a DWARF v5 line table
header has indirect strings, in a verbose dump these will all have
their section[offset] printed as well as the name itself. This
matches the format used for dumping strings in the .debug_info
section.
Differential Revision: https://reviews.llvm.org/D42802
llvm-svn: 324270
Summary:
When creating the debug fragments for a SRA'd variable, use the types'
allocation sizes. This fixes issues where the pass would emit too small
fragments, placed at the wrong offset, for padded types.
An example of this is long double on x86. The type is represented using
x86_fp80, which is 10 bytes, but the value is aligned to 12/16 bytes.
The padding is included in the type's DW_AT_byte_size attribute;
therefore, the fragments should also include that. Newer GCC releases
(I tested 7.2.0) emit 12/16-byte pieces for long double. Earlier
releases, e.g. GCC 5.5.0, behaved as LLVM did, i.e. by emitting a
10-byte piece, followed by an empty 2/6-byte piece for the padding.
Failing to cover all `DW_AT_byte_size' bytes of a value with non-empty
pieces results in the value being printed as <optimized out> by GDB.
Patch by: David Stenberg
Reviewers: aprantl, JDevlieghere
Reviewed By: aprantl, JDevlieghere
Subscribers: llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D42807
llvm-svn: 324066
Increment the field list member count for base classes and virtual base
classes.
Differential Revision: https://reviews.llvm.org/D41874
llvm-svn: 324000
Summary:
This change extends MachineCopyPropagation to do COPY source forwarding
and adds an additional run of the pass to the default pass pipeline just
after register allocation.
This version of this patch uses the newly added
MachineOperand::isRenamable bit to avoid forwarding registers is such a
way as to violate constraints that aren't captured in the
Machine IR (e.g. ABI or ISA constraints).
This change is a continuation of the work started in D30751.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa, tstellar
Subscribers: tpr, mgorny, mcrosier, nhaehnle, nemanjai, jyknight, hfinkel, arsenm, inouehrs, eraman, sdardis, guyblank, fedor.sergeev, aheejin, dschuff, jfb, myatsina, llvm-commits
Differential Revision: https://reviews.llvm.org/D41835
llvm-svn: 323991
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
r323476 added support for DW_FORM_line_strp, and incorrectly made that
depend on having a DWARFUnit available. We shouldn't be tracking
.debug_line_str in DWARFUnit after all. After this patch, I can do an
NFC follow up and undo a bunch of the "plumbing" part of r323476.
Differential Revision: https://reviews.llvm.org/D42609
llvm-svn: 323691
Summary:
When emitting the location for a global variable with fragmented debug
expressions, make sure that the offset pieces, which represent
optimized-out parts of the variable, are emitted before their succeeding
fragments' expressions. Previously, if the succeeding fragment's
location was a symbol, the offset piece was emitted after, rather than
before, that symbol's expression. This effectively meant that the symbols
were associated with the wrong parts of the variable.
This fixes PR36085.
Patch by: David Stenberg
Reviewers: aprantl, probinson, dblaikie
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D42527
llvm-svn: 323644
Summary:
This modifies the dwarfdump output to align it with the new .debug_names
dump. It also renames two header fields to match similar fields in the
dwarf5 header.
A couple of tests needed to be updated to match new output. The changes
were fairly straight-forward, although not really automatable.
Reviewers: JDevlieghere, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42415
llvm-svn: 323641
Summary:
This commit renames DWARFAcceleratorTable to AppleAcceleratorTable to free up
the first name as an interface for the different accelerator tables.
Then I add a DWARFDebugNames class for the dwarf5 table.
Presently, the only common functionality of the two classes is the dump()
method, because this is the only method that was necessary to implement
dwarfdump -debug-names; and because the rest of the
AppleAcceleratorTable interface does not directly transfer to the dwarf5
tables (the main reason for that is that the present interface assumes
the tables are homogeneous, but the dwarf5 tables can have different
keys associated with each entry).
I expect to make the common interface richer as I add more functionality
to the new class (and invent a way to represent it in generic way).
In terms of sharing the implementation, I found the format of the two
tables sufficiently different to frustrate any attempts to have common
parsing or dumping code, so presently the implementations share just low
level code for formatting dwarf constants.
Reviewers: vleschuk, JDevlieghere, clayborg, aprantl, probinson, echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42297
llvm-svn: 323638
Summary: This is the producer side for DWARF v5 string offsets tables. The reader/consumer
side was committed with r321295. All compile and type units in a module share a
contribution to the string offsets table. Indirect strings use the strx{1,2,3,4} index forms.
Reviewers: dblaikie, aprantl, JDevliegehere
Differential Revision: https://reviews.llvm.org/D42021
llvm-svn: 323546
This form is like DW_FORM_strp, but points to .debug_line_str instead
of .debug_str as the string section. It's intended to be used from
the line-table header, and allows string-pooling of directory and
filenames across compilation units.
Differential Revision: https://reviews.llvm.org/D42553
llvm-svn: 323476
Summary:
When creating the debug fragments for a SRA'd struct, use the fields'
offsets, taken from the struct layout, as the offsets for the resulting
fragments. This fixes an issue where GlobalOpt would emit fragments with
incorrect offsets for padded fields.
This should solve PR36016.
Patch by David Stenberg.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42489
llvm-svn: 323411
Summary:
This patch implements the codegen of DWARF debug info for non-constant
'count' fields for DISubrange.
This is patch [2/3] in a series to extend LLVM's DISubrange Metadata
node to support debugging of C99 variable length arrays and vectors with
runtime length like the Scalable Vector Extension for AArch64. It is
also a first step towards representing more complex cases like arrays
in Fortran.
Reviewers: echristo, pcc, aprantl, dexonsmith, clayborg, kristof.beyls, dblaikie
Reviewed By: aprantl
Subscribers: fhahn, aemerson, rengolin, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41696
llvm-svn: 323323
Opt's "-enable-debugify" mode adds an instance of Debugify at the
beginning of the pass pipeline, and an instance of CheckDebugify at the
end.
You can enable this mode with lit using: -Dopt="opt -enable-debugify".
Note that running test suites in this mode will result in many failures
due to strict FileCheck commands, etc.
It can be more useful to look for assertion failures which arise only
when Debugify is enabled, e.g to prove that we have (or do not have)
test coverage for some code path with debug info present.
Differential Revision: https://reviews.llvm.org/D41793
llvm-svn: 323256
The compilation directory has always been #0, but as of DWARF v5 it is
explicitly listed in the line-table section instead of implicitly
being a reference to the compile_unit DIE's DW_AT_comp_dir attribute.
This means the dumper should number the dumped array starting with 0
or 1 depending on the DWARF version of the line table.
References in the generated DWARF are correct, it's just the dumper
that was wrong. Also some assembler-coded tests were similarly
confused about directory numbers.
llvm-svn: 322884
Summary:
Currently -glldb turns on emission of apple tables on all targets, but
lldb is only really capable of consuming them on darwin. Furthermore,
making lldb consume these tables is not straight-forward because of the
differences in how the debug info is distributed on darwin vs. elf
targets.
The darwin debug model assumes that the debug info (along with
accelerator tables) will either remain in the .o files or it will be
linked into a dsym bundle by a linker that knows how to merge these
tables. In the elf world, all present linkers will simply concatenate
these accelerator tables into the shared object. Since the tables are
not self-terminating, this renders the tables unusable, as the debugger
cannot pry the individual tables apart anymore.
It might theoretically be possible to make the tables work with split
dwarf, as that is somewhat similar to the apple .o model, but
unfortunately right now the combination of -glldb and -gsplit-dwarf
produces broken object files.
Until these issues are resolved there is no point in emitting the apple
tables for these targets. At best, it wastes space; at worst, it breaks
compilation and prevents the user from getting other benefits of -glldb.
Reviewers: probinson, aprantl, dblaikie
Subscribers: emaste, dim, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D41986
llvm-svn: 322633
Summary:
In a follow-up commit I'll change the rules for emission of accelerator
tables, which means we won't be able to use them as a litmus test for
the debugger tuning options. Instead of sections, I base the test on the
presence/absence of some debug info attributes and opcodes:
LLDB - prefers DW_OP_form_tls_address and uses DW_AT_APPLE_optimized
GDB - prefers DW_OP_GNU_push_tls_address and does not use the optimized
attribute
SCE - prefers DW_OP_form_tls_address and does not use the optimized
attribute
Reviewers: probinson, aprantl, dblaikie
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41985
llvm-svn: 322630
Current condition for spill instruction recognition in LiveDebugValues does
not recognize case when register is spilled and killed in next instruction.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D41226
llvm-svn: 322554
This patch fixes the assertion failure in SROA reported in PR35657.
PR35657 reports the assertion failure due to r319522 (splitting for non-whole-alloca slices), but this problem can happen even without r319522.
The problem exists in a check for reusing an existing alloca when rewriting partitions. As the original comment said, we can reuse the existing alloca if the new alloca has the same type and offset with the existing one. But the code checks only type of the alloca and then check the offset using an assert.
In a corner case with out-of-bounds access (e.g. @PR35657 function added in unit test), it is possible that the two allocas have the same type but different offsets.
This patch makes the check of the offset in the if condition, and re-enables the splitting for non-whole-alloca slices.
Differential Revision: https://reviews.llvm.org/D41981
llvm-svn: 322533
Summary:
- MSVC uses the none type for a variadic argument in CodeView
- Add a unit test
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D41931
llvm-svn: 322257
Add test/DebugInfo/MIR/Mips/lit.local.cfg so no tests are run if Mips is
not a supported target.
This should resolve buildbot failures seen after r322015.
llvm-svn: 322020
The last iterator of MBB should be recognized as MBB.end() not as
MBB.instr_end() which could return bundled instruction that is not iterable
with basic iterator.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D41626
llvm-svn: 322015
This had been reverted because the new test failed on non-X86 bots. I moved
the new test to the appropriate subdirectory to correct this.
Differential Revision: https://reviews.llvm.org/D41264
Original submission: r321122 (which was reverted by r321125)
This reverts commit 3c1639b5703c387a0d8cba2862803b4e68dff436.
llvm-svn: 321911
Summary:
This commit updates the BufferByteStreamer, used by DebugLocStream
to buffer bytes/comments to put in the debug_loc section, to
make sure that the Buffer and Comments vectors are synced.
Previously, when an SLEB128 or ULEB128 was emitted together with
a comment, the vectors could be out-of-sync if the LEB encoding
added several entries to the Buffer vectors, while we only added
a single entry to the Comments vector.
The goal with this is to get the comments in the debug_loc
section in the .s file correctly aligned.
Example (using ARM as target):
Instead of
.byte 144 @ sub-register DW_OP_regx
.byte 128 @ 256
.byte 2 @ DW_OP_piece
.byte 147 @ 8
.byte 8 @ sub-register DW_OP_regx
.byte 144 @ 257
.byte 129 @ DW_OP_piece
.byte 2 @ 8
.byte 147 @
.byte 8 @
we now get
.byte 144 @ sub-register DW_OP_regx
.byte 128 @ 256
.byte 2 @
.byte 147 @ DW_OP_piece
.byte 8 @ 8
.byte 144 @ sub-register DW_OP_regx
.byte 129 @ 257
.byte 2 @
.byte 147 @ DW_OP_piece
.byte 8 @ 8
Reviewers: JDevlieghere, rnk, aprantl
Reviewed By: aprantl
Subscribers: davide, Ka-Ka, uabelho, aemerson, javed.absar, kristof.beyls, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D41763
llvm-svn: 321907
This implements the DWARF 5 feature described at
http://www.dwarfstd.org/ShowIssue.php?issue=141215.1
This allows a consumer to understand whether a composite data type is
trivially copyable and thus should be passed by value instead of by
reference. The canonical example is being able to distinguish the
following two types:
// S is not trivially copyable because of the explicit destructor.
struct S {
~S() {}
};
// T is a POD type.
struct T {
~T() = default;
};
This patch adds two new (DI)flags to LLVM metadata: TypePassByValue
and TypePassByReference.
<rdar://problem/36034922>
Differential Revision: https://reviews.llvm.org/D41743
llvm-svn: 321844
Tests updated to explicitly use fast-isel at -O0 instead of implicitly.
This change also allows an explicit -fast-isel option to override an
implicitly enabled global-isel. Otherwise -fast-isel would have no effect at -O0.
Differential Revision: https://reviews.llvm.org/D41362
llvm-svn: 321655
Reorganizes the DWARF consumer to derive the string offsets table
contribution's format from the contribution header instead of
(incorrectly) from the unit's format.
Reviewers: JDevliegehere, aprantl
Differential Revision: https://reviews.llvm.org/D41146
llvm-svn: 321295
It appears the code uses nullptr to represent a void type in debug metadata,
which led to an assertion failure when building DeltaAlgorithm.cpp with a
self-hosted clang on Windows.
I'm not sure why/if the problem was Windows-specific.
Fixes bug https://bugs.llvm.org/show_bug.cgi?id=35543
Differential Revision: https://reviews.llvm.org/D41264
llvm-svn: 321122
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
This patch introduce a switch to control splitting of non-whole-alloca slices with default off.
The switch will be default on again after fixing an issue reported in PR35657.
llvm-svn: 320958
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
While investigating LLVM PR22316 (http://llvm.org/bugs/show_bug.cgi?id=22316)
I started wondering if it were not always preferable to emit the
initial DBG_VALUEs for stack arguments as FI locations instead of
describing the first register they get copied into. The advantage of
doing this is that the arguments will be available as soon as the
stack is setup. As illustrated by the testcase in the PR, the first
copy of the FI into a register may be sunk by MachineSink.cpp into a
later basic block. By describing the argument on the stack, we nicely
circumvent this problem.
<rdar://problem/19583723>
Differential Revision: https://reviews.llvm.org/D41135
llvm-svn: 320758
This should solve:
https://bugs.llvm.org/show_bug.cgi?id=34603
...by preventing SimplifyCFG from altering redundant instructions before early-cse has a chance to run.
It changes the default (canonical-forming) behavior of SimplifyCFG, so we're only doing the
sinking transform later in the optimization pipeline.
Differential Revision: https://reviews.llvm.org/D38566
llvm-svn: 320749
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
Summary:
Add isRenamable() predicate to MachineOperand. This predicate can be
used by machine passes after register allocation to determine whether it
is safe to rename a given register operand. Register operands that
aren't marked as renamable may be required to be assigned their current
register to satisfy constraints that are not captured by the machine
IR (e.g. ABI or ISA constraints).
Reviewers: qcolombet, MatzeB, hfinkel
Subscribers: nemanjai, mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D39400
llvm-svn: 320503
The function stack poisioner conditionally stores local variables
either in an alloca or in malloc'ated memory, which has the
unfortunate side-effect, that the actual address of the variable is
only materialized when the variable is accessed, which means that
those variables are mostly invisible to the debugger even when
compiling without optimizations.
This patch stores the address of the local stack base into an alloca,
which can be referred to by the debug info and is available throughout
the function. This adds one extra pointer-sized alloca to each stack
frame (but mem2reg can optimize it away again when optimizations are
enabled, yielding roughly the same debug info quality as before in
optimized code).
rdar://problem/30433661
Differential Revision: https://reviews.llvm.org/D41034
llvm-svn: 320415
This fixes a bug where the verifier was complaining about empty
accelerator tables. When the table is empty, its size is not a valid
offset as it points after the end of the section.
This patch also makes the extractor return llvm:Error instead of bool
for better error reporting in the verifier.
Differential revision: https://reviews.llvm.org/D41063
rdar://35932007
llvm-svn: 320399
The Debugify pass synthesizes debug info for IR. It's paired with a
CheckDebugify pass which determines how much of the original debug info
is preserved. These passes make it easier to create targeted tests for
debug info preservation.
Here is the Debugify algorithm:
NextLine = 1
for (Instruction &I : M)
attach DebugLoc(NextLine++) to I
NextVar = 1
for (Instruction &I : M)
if (canAttachDebugValue(I))
attach dbg.value(NextVar++) to I
The CheckDebugify pass expects contiguous ranges of DILocations and
DILocalVariables. If it fails to find all of the expected debug info, it
prints a specific error to stderr which can be FileChecked.
This was discussed on llvm-dev in the thread:
"Passes to add/validate synthetic debug info"
Differential Revision: https://reviews.llvm.org/D40512
llvm-svn: 320202
As we emit different linetables format on different operating
systems, this currently fails on linux. Speculative commit
to fix the bots.
llvm-svn: 319997
dsymutil doesn't yet understand the new format and the change,
among others, breaks a large fraction of the debugger tests on
mac OS.
rdar://problem/35856354
llvm-svn: 319995
Since the local hash is a different number of bytes depending
on host architecture, we don't have a consistent value. I
will need to re-do this test for both x86 and x64. For now
it accepts any value for the local hash.
llvm-svn: 319864
Set the .debug_line version to match the requested DWARF version,
except with a maximum of v4 because we don't support v5 yet.
Previously Chromium had issues with this patch; see PR31407. Chromium
tool issues have been addressed, so hopefully this will go through
this time.
Patch by Katya Romanova!
Differential Revision: https://reviews.llvm.org/D38002
llvm-svn: 319699
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
Currently, SROA splits loads and stores only when they are accessing the whole alloca.
This patch relaxes this limitation to allow splitting a load/store if all other loads and stores to the alloca are disjoint to or fully included in the current load/store. If there is no other load or store that crosses the boundary of the current load/store, the current splitting implementation works as is.
The whole-alloca loads and stores meet this new condition and so they are still splittable.
Here is a simplified motivating example.
struct record {
long long a;
int b;
int c;
};
int func(struct record r) {
for (int i = 0; i < r.c; i++)
r.b++;
return r.b;
}
When updating r.b (or r.c as well), LLVM generates redundant instructions on some platforms (such as x86_64, ppc64); here, r.b and r.c are packed into one 64-bit GPR when the struct is passed as a method argument.
With this patch, the above example is compiled into only few instructions without loop.
Without the patch, unnecessary loop-carried dependency is introduced by SROA and the loop cannot be eliminated by the later optimizers.
Differential Revision: https://reviews.llvm.org/D32998
llvm-svn: 319407
An alloca may be larger than a variable that is described to be stored
there. Don't create a dbg.value for fragments that are outside of the
variable.
This fixes PR35447.
https://bugs.llvm.org/show_bug.cgi?id=35447
llvm-svn: 319230
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
As a side effect, the .debug_line section will be dumped in physical
order, rather than in the order that compile units refer to their
associated portions of the .debug_line section. These are probably
always the same order anyway, and no tests noticed the difference.
Differential Revision: https://reviews.llvm.org/D39854
llvm-svn: 318839
In constructAbstractSubprogramScopeDIE there can be a potential mismatch
between `this` and the CU of ContextDIE when a scope is shared between
two DISubprograms belonging to a different CU. In that case, `this` is
the CU that was specified in the IR, but the CU of ContextDIE is that of
the first subprogram that was emitted. This patch fixes the mismatch by
looking up the CU of ContextDIE, and switching to use that.
This fixes PR35212 (https://bugs.llvm.org/show_bug.cgi?id=35212)
Patch by Philip Craig!
Differential revision: https://reviews.llvm.org/D39981
llvm-svn: 318289
Summary:
The associated debug value is updated when the virtual source register
of a copy is completely eliminated and replaced with a rematerialize
value in the defed register of the copy. As the debug value now is
associated with another register it also need to be moved, otherwise
the debug value isn't valid.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: MatzeB, llvm-commits, qcolombet
Differential Revision: https://reviews.llvm.org/D38024
llvm-svn: 317880
In Rust, a trait can be implemented for any type, and if a trait
object pointer is used for the type, then a virtual table will be
emitted for that trait/type combination.
We would like debuggers to be able to inspect trait objects, which
requires finding the concrete type associated with a given vtable.
This patch changes LLVM so that any type can be passed to
replaceVTableHolder. This allows the Rust compiler to emit the needed
debug info -- associating a vtable with the concrete type for which it
was emitted.
This is a DWARF extension: DWARF only specifies the meaning of
DW_AT_containing_type in one specific situation. This style of DWARF
extension is routine, though, and LLVM already has one such case for
DW_AT_containing_type.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D39503
llvm-svn: 317730
In 2010 a commit with no testcase and no further explanation
explicitly disabled the handling of inlined variables in
EmitFuncArgumentDbgValue(). I don't think there is a good reason for
this any more and re-enabling this adds debug locations for variables
associated with an LLVM function argument in functions that are
inlined into the first basic block. The only downside of doing this is
that we may insert a DBG_VALUE before the inlined scope, but (1) this
could be filtered out later, and (2) LiveDebugValues will not
propagate it into subsequent basic blocks if they don't dominate the
variable's lexical scope, so this seems like a small price to pay.
rdar://problem/26228128
llvm-svn: 317702
Vedant Kumar