Just matter of enabling the config option.
(Also changed the platform of the input test file to macOS, since that's
the default that we specify in the `%lld` substitution. The conflict was
causing errors when linking with LTO.)
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D127600
This removes options for performing LTO with the legacy pass
manager in LLD. Options that explicitly enable the new pass manager
are retained as no-ops.
Differential Revision: https://reviews.llvm.org/D123219
Since Mach-O has a two-level namespace (unlike ELF), we can usually set
this property to true.
(I believe this setting is only available in the new LTO backend, so I
can't really use ld64 / libLTO's behavior as a reference here... I'm
just doing what I think is correct.)
See {D119294} for the work done to calculate the `interposable` used in
this diff.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D119506
By unsetting this property, we are now able to internalize more symbols
during LTO. I compared the output of `-save-temps` for both LLD and
ld64, and we now match ld64's behavior as far as `lto-internalize.ll` is
concerned.
(Thanks @smeenai for working on an initial version of this diff!)
Fixes https://github.com/llvm/llvm-project/issues/50574.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D119372
Move all variables at file-scope or function-static-scope into a hosting structure (lld::CommonLinkerContext) that lives at lldMain()-scope. Drivers will inherit from this structure and add their own global state, in the same way as for the existing COFFLinkerContext.
See discussion in https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html
Differential Revision: https://reviews.llvm.org/D108850
This diff makes several amendments to the local file caching mechanism
which was migrated from ThinLTO to Support in
rGe678c51177102845c93529d457b020f969125373 in response to follow-up
discussion on that commit.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D113080
We would like to move ThinLTO’s battle-tested file caching mechanism to
the LLVM Support library so that we can use it elsewhere in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111371
We would like to move ThinLTO’s battle-tested file caching mechanism to
the LLVM Support library so that we can use it elsewhere in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111371
Failing to do so results in `std::bad_function_call` being
thrown when a pass tries to emit a diagnostic.
I've copied the relevant test over from LLD-ELF's test suite.
Reviewed By: #lld-macho, thevinster
Differential Revision: https://reviews.llvm.org/D109274
This adds support for the lld-only `--thinlto-cache-policy` option, as well as
implementations for ld64's `-cache_path_lto`, `-prune_interval_lto`,
`-prune_after_lto`, and `-max_relative_cache_size_lto`.
Test is adapted from lld/test/ELF/lto/cache.ll
Differential Revision: https://reviews.llvm.org/D105922
This implements the part of -export_dynamic that adds external
symbols as dead strip roots even for executables.
It does not yet implement the effect -export_dynamic has for LTO.
I tried just replacing `config->outputType != MH_EXECUTE` with
`(config->outputType != MH_EXECUTE || config->exportDynamic)` in
LTO.cpp, but then local symbols make it into the symbol table too,
which is too much (and also doesn't match ld64). So punt on this
for now until I understand it better.
(D91583 may or may not be related too).
Differential Revision: https://reviews.llvm.org/D105482
Everything (including test) modified from ELF/COFF. Using the same syntax
(--lto-O3, etc) as ELF.
Differential Revision: https://reviews.llvm.org/D105223
This diff adds initial support for the legacy LC_VERSION_MIN_* load commands.
Test plan: make check-lld-macho
Differential revision: https://reviews.llvm.org/D100523
This allows LLVM's LTO to internalize symbols that are not referenced
directly by regular objects. Naturally, this means we need to track
which symbols are referenced by regular objects. The approach taken here
is similar to LLD-COFF's: like the COFF port, we extend
`SymbolTable::insert()` to set the isVisibleToRegularObj bit. (LLD-ELF
relies on the Symbol constructor and `Symbol::mergeProperties()`, but
the Mach-O port does not have a `mergeProperties()` equivalent.)
From what I can tell, ld64 (which uses libLTO) doesn't do this
optimization at all. I'm not even sure libLTO provides a way to do this.
Not having ld64's behavior as a reference implementation is unfortunate;
instead, I am relying on LLD-ELF/COFF's behavior as references while
erring on the conservative side. In particular, LLD-MachO will only do
this optimization for executables right now.
We also don't attempt it when `-flat_namespace` is used -- otherwise
we'd need scan the symbol table to find matches for every un-namespaced
symbol reference, which is expensive.
internalize.ll is based off the LLD-ELF tests `internalize-basic.ll` and
`internalize-undef.ll`. Looks like @davide added some of LLD-ELF's internalize
tests, so adding him as a reviewer...
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D99105
The test is loosely based off LLD-ELF's `thinlto.ll`. However, I
found that test questionable because the the -save_temps behavior it
checks for is identical regardless of whether we are running in single-
or multi-threaded mode. I tried writing a test based on `--time-trace`
but couldn't get it to run deterministically... so I've opted to just
skip checking that behavior for now.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D99356
The main challenge was handling the different on-disk structures (e.g.
`mach_header` vs `mach_header_64`). I tried to strike a balance between
sprinkling `target->wordSize == 8` checks everywhere (branchy = slow, and ugly)
and templatizing everything (causes code bloat, also ugly). I think I struck a
decent balance by judicious use of type erasure.
Note that LLD-ELF has a similar architecture, though it seems to use more templating.
Linking chromium_framework takes about the same time before and after this
change:
N Min Max Median Avg Stddev
x 20 4.52 4.67 4.595 4.5945 0.044423204
+ 20 4.5 4.71 4.575 4.582 0.056344803
No difference proven at 95.0% confidence
Reviewed By: #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D99633
lld policy discourages `auto`. Replace it with a type name whenever reasonable. Retain `auto` to avoid ...
* redundancy, as for decls such as `auto *t = mumble_cast<TYPE *>` or similar that specifies the result type on the RHS
* verbosity, as for iterators
* gratuitous suffering, as for lambdas
Along the way, add `const` when appropriate.
Note: a future diff will ...
* add more `const` qualifiers
* remove `opt::` when we are already `using llvm::opt`
Differential Revision: https://reviews.llvm.org/D98313
Previously, we were loading re-exports without checking whether
they were compatible with our target. Prior to {D97209}, it meant that
we were defining dylib symbols that were invalid -- usually a silent
failure unless our binary actually used them. D97209 exposed this as an
explicit error.
Along the way, I've extended our TAPI compatibility check to cover the
platform as well, instead of just checking the arch. To this end, I've
replaced MachO::Architecture with MachO::Target in our Config struct.
Reviewed By: #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D97867
When parsing bitcode, convert LTO Symbols to LLD Symbols in order to perform
resolution. The "winning" symbol will then be marked as Prevailing at LTO
compilation time. This is similar to what the other LLD ports do.
This change allows us to handle `linkonce` symbols correctly, and to deal with
duplicate bitcode symbols gracefully. Previously, both scenarios would result in
an assertion failure inside the LTO code, complaining that multiple Prevailing
definitions are not allowed.
While at it, I also added basic logic around visibility. We don't do anything
useful with it yet, but we do check that its value is valid. LLD-ELF appears to
use it only to set FinalDefinitionInLinkageUnit for LTO, which I think is just a
performance optimization.
From my local experimentation, the linker itself doesn't seem to do anything
differently when encountering linkonce / linkonce_odr / weak / weak_odr. So I've
only written a test for one of them. LLD-ELF has more, but they seem to mostly
be testing the intermediate bitcode output of their LTO backend...? I'm far from
an expert here though, so I might very well be missing things.
Reviewed By: #lld-macho, MaskRay, smeenai
Differential Revision: https://reviews.llvm.org/D94342
Run the ObjCARCContractPass during LTO. The legacy LTO backend (under
LTO/ThinLTOCodeGenerator.cpp) already does this; this diff just adds that
behavior to the new LTO backend. Without that pass, the objc.clang.arc.use
intrinsic will get passed to the instruction selector, which doesn't know how to
handle it.
In order to test both the new and old pass managers, I've also added support for
the `--[no-]lto-legacy-pass-manager` flags.
P.S. Not sure if the ordering of the pass within the pipeline matters...
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D94547
`-mcpu` and `-code-model` tests were copied from similar ones in
LLD-ELF.
There doesn't seem to be an equivalent test for `-mattr` in LLD-ELF, so
I've verified our behavior by cribbing a test from
CodeGen/X86/recip-fastmath.ll.
Reviewed By: #lld-macho, compnerd, MaskRay
Differential Revision: https://reviews.llvm.org/D92912
This makes it possible for STABS entries to reference the debug info
contained in the LTO-compiled output.
I'm not sure how to test the file mtime within llvm-lit -- GNU and BSD
`stat` take different command-line arguments. I've omitted the check for
now.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D92537
Also, for .o files, include full path as given on link command line.
Before:
lld: error: undefined symbol [...], referenced from sandbox_logging.o
After:
lld: error: undefined symbol [...], referenced from libseatbelt.a(sandbox_logging.o)
Move archiveName up to InputFile so we can consistently use toString()
to print InputFiles in diags, and pass it to the ObjFile ctor. This
matches the ELF and COFF ports.
Differential Revision: https://reviews.llvm.org/D92437
We should also set the modtime when running LTO. That will be done in a
future diff, together with support for the `-object_path_lto` flag.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D91318
Just enough to consume some bitcode files and link them. There's more
to be done around the symbol resolution API and the LTO config, but I don't yet
understand what all the various LTO settings do...
Reviewed By: #lld-macho, compnerd, smeenai, MaskRay
Differential Revision: https://reviews.llvm.org/D90663
Jez Ng