to enable the use of external type references in the debug info
(a.k.a. module debugging).
The driver expands -gmodules to "-g -fmodule-format=obj -dwarf-ext-refs"
and passes that to cc1. All this does at the moment is set a flag
codegenopts.
http://reviews.llvm.org/D11958
llvm-svn: 246192
Fix a bug in the matcher docs where callExpr(on(...)) was in the examples,
but didn't work (on() only works for memberCallExpr).
Fix a bug in the doc dump script that was introduced in r231575 when
removing a regexp capture without adapting the code that uses the
captures.
llvm-svn: 245040
This change adds the new unroll metadata "llvm.loop.unroll.enable" which directs
the optimizer to unroll a loop fully if the trip count is known at compile time, and
unroll partially if the trip count is not known at compile time. This differs from
"llvm.loop.unroll.full" which explicitly does not unroll a loop if the trip count is not
known at compile time
With this change "#pragma unroll" generates "llvm.loop.unroll.enable" rather than
"llvm.loop.unroll.full" metadata. This changes the semantics of "#pragma unroll" slightly
to mean "unroll aggressively (fully or partially)" rather than "unroll fully or not at all".
The motivating example for this change was some internal code with a loop marked
with "#pragma unroll" which only sometimes had a compile-time trip count depending
on template magic. When the trip count was a compile-time constant, everything works
as expected and the loop is fully unrolled. However, when the trip count was not a
compile-time constant the "#pragma unroll" explicitly disabled unrolling of the loop(!).
Removing "#pragma unroll" caused the loop to be unrolled partially which was desirable
from a performance perspective.
llvm-svn: 244467
Summary:
Add brace style `BS_WebKit` as described on https://www.webkit.org/coding/coding-style.html:
* Function definitions: place each brace on its own line.
* Other braces: place the open brace on the line preceding the code block; place the close brace on its own line.
Set brace style used in `getWebKitStyle()` to the newly added `BS_WebKit`.
Reviewers: djasper, klimek
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D11837
llvm-svn: 244446
This patch adds flags -fno-profile-instr-generate and
-fno-profile-instr-use, and the GCC aliases -fno-profile-generate and
-fno-profile-use.
These flags are used in situations where users need to disable profile
generation or use for specific files in a build, without affecting other
files.
llvm-svn: 244153
Support for emitting libcalls for __atomic_fetch_nand and
__atomic_{add,sub,and,or,xor,nand}_fetch was missing; add it, and some
test cases.
Differential Revision: http://reviews.llvm.org/D10847
llvm-svn: 244063
This will be used for old targets like Android that do not
support ELF TLS models.
Differential Revision: http://reviews.llvm.org/D10524
llvm-svn: 243441
Summary: This corresponds to the change made in r237417 - "Doxygen: Enable autobrief feature and update coding standards."
Reviewers: eliben
Subscribers: eliben, cfe-commits
Differential Revision: http://reviews.llvm.org/D11281
llvm-svn: 242485
We now use the sanitizer special case list to decide which types to blacklist.
We also support a special blacklist entry for types with a uuid attribute,
which are generally COM types whose virtual tables are defined externally.
Differential Revision: http://reviews.llvm.org/D11096
llvm-svn: 242286
This change updates the documentation for the loop unrolling pragma behavior
change in r242047. Specifically, with that change "#pragma unroll" will not
unroll loops with a runtime trip count.
llvm-svn: 242048
This patch adds support for specifying where the profile is emitted in a
way similar to GCC. These flags are used to specify directories instead
of filenames. When -fprofile-generate=DIR is used, the compiler will
generate code to write to <DIR>/default.profraw.
The patch also adds a couple of extensions: LLVM_PROFILE_FILE can still be
used to override the directory and file name to use and -fprofile-use
accepts both directories and filenames.
To simplify the set of flags used in the backend, all the flags get
canonicalized to -fprofile-instr-{generate,use} when passed to the
backend. The decision to use a default name for the profile is done
in the driver.
llvm-svn: 241825
The MacroBlockBegin and MacroBlockEnd options make matching macro identifiers
behave like '{' and '}', respectively, in terms of indentation.
Mozilla code, for example, uses several macros that begin and end a scope.
Previously, Clang-Format removed the indentation resulting in:
MACRO_BEGIN(...)
MACRO_ENTRY(...)
MACRO_ENTRY(...)
MACRO_END
Now, using the options
MacroBlockBegin: "^[A-Z_]+_BEGIN$"
MacroBlockEnd: "^[A-Z_]+_END$"
will yield the expected result:
MACRO_BEGIN(...)
MACRO_ENTRY(...)
MACRO_ENTRY(...)
MACRO_END
Differential Revision: http://reviews.llvm.org/D10840
llvm-svn: 241363
The Job base class was removed in r241310, so replace a couple of
references to it with Command. Also change another use of Job with
Action, since that's the term used in the source.
llvm-svn: 241327
Summary:
This diff introduces .rst files, Sphinx config, and a CMake target
for building clang man pages. This will deprecate the existing .pod-
based man page, and will integrate nicely with CMake. This diff does
not remove the existing man page; that will be done in a follow-up
once packagers have had a chance to react to the change.
For now, only clang(1) has been done; others can be added over time
by dropping additional files into the docs/CommandGuide directory.
The index page for CommandGuide has been copied from LLVM's
docs/CommandGuide.
The man page itself is mostly the same, with a few minor cosmetic
changes. The only major change is the SYNOPSIS section. I was unable
to get .rst/Sphinx produce the same style as in the existing man page.
Instead, I changed it to match the LLVM tools' relatively simple style.
To build the man pages, use the "docs-clang-man" target if building
with CMake. Otherwise, use "make -f Makefile.sphinx man".
Reviewers: cmatthews, silvas
Subscribers: dim, gaeke, beanz, cfe-commits
Differential Revision: http://reviews.llvm.org/D10562
llvm-svn: 241037
- Added the description of the interceptor suppression.
- Re-organized a bit: grouped a few things under the Issue Suppression
section, grouped IOC and leaks under a section, placed symbolication
info into Symbolizing the Reports section..
- In supported platforms: "MacOS" -> "OS X"; added "iOS Simulator"
- Added a paragraph to the Usage section describing when DYLD_INSERT_LIBRARIES
might need to be used.
- "attribute((no_sanitize_address))" -> "__attribute__((no_sanitize("address")))"
- Updated Leak Sanitizer page with most up to date info.
....
http://reviews.llvm.org/D10559
llvm-svn: 240725
This patch makes the following improvements to the SafeStack documentation:
Explicitly states the security guarantees of the SafeStack
Clarifies which of the security guarantees are probabilistic
Re-orders security limitations to put the most severe ones first
Explains how `__attribute__((no_sanitize("safe-stack")))` works and how to use it safely
Explains that SafeStack should be combined with a forward-edge protection mechanism, such as CPI, IFCC or others
Multiple readability and stylistic improvements
Patch by Volodymyr Kuznetsov!
Differential Revision: http://reviews.llvm.org/D10598
llvm-svn: 240472
Summary:
This is unfortunate, but would let us land http://reviews.llvm.org/D10467,
that makes ToolChains responsible for computing the set of sanitizers
they support.
Unfortunately, Darwin ToolChains doesn't know about actual OS they
target until ToolChain::TranslateArgs() is called. In particular, it
means we won't be able to construct SanitizerArgs for these ToolChains
before that.
This change removes SanitizerArgs::needsLTO() method, so that now
ToolChain::IsUsingLTO(), which is called very early, doesn't need
SanitizerArgs to implement this method.
Docs and test cases are updated accordingly. See
https://llvm.org/bugs/show_bug.cgi?id=23539, which describes why we
start all these.
Test Plan: regression test suite
Reviewers: pcc
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D10560
llvm-svn: 240170
This causes programs compiled with this flag to print a diagnostic when
a control flow integrity check fails instead of aborting. Diagnostics are
printed using UBSan's runtime library.
The main motivation of this feature over -fsanitize=vptr is fidelity with
the -fsanitize=cfi implementation: the diagnostics are printed under exactly
the same conditions as those which would cause -fsanitize=cfi to abort the
program. This means that the same restrictions apply regarding compiling
all translation units with -fsanitize=cfi, cross-DSO virtual calls are
forbidden, etc.
Differential Revision: http://reviews.llvm.org/D10268
llvm-svn: 240109
This flag controls whether a given sanitizer traps upon detecting
an error. It currently only supports UBSan. The existing flag
-fsanitize-undefined-trap-on-error has been made an alias of
-fsanitize-trap=undefined.
This change also cleans up some awkward behavior around the combination
of -fsanitize-trap=undefined and -fsanitize=undefined. Previously we
would reject command lines containing the combination of these two flags,
as -fsanitize=vptr is not compatible with trapping. This required the
creation of -fsanitize=undefined-trap, which excluded -fsanitize=vptr
(and -fsanitize=function, but this seems like an oversight).
Now, -fsanitize=undefined is an alias for -fsanitize=undefined-trap,
and if -fsanitize-trap=undefined is specified, we treat -fsanitize=vptr
as an "unsupported" flag, which means that we error out if the flag is
specified explicitly, but implicitly disable it if the flag was implied
by -fsanitize=undefined.
Differential Revision: http://reviews.llvm.org/D10464
llvm-svn: 240105
In essence this is meant to consistently indent multiline strings by a
fixed amount of spaces from the start of the line. Don't do this in
cases where it wouldn't help anyway.
Before:
someFunction(aaaaa,
"aaaaa"
"bbbbb");
After:
someFunction(aaaaa, "aaaaa"
"bbbbb");
llvm-svn: 240004
This patch adds the -fsanitize=safe-stack command line argument for clang,
which enables the Safe Stack protection (see http://reviews.llvm.org/D6094
for the detailed description of the Safe Stack).
This patch is our implementation of the safe stack on top of Clang. The
patches make the following changes:
- Add -fsanitize=safe-stack and -fno-sanitize=safe-stack options to clang
to control safe stack usage (the safe stack is disabled by default).
- Add __attribute__((no_sanitize("safe-stack"))) attribute to clang that can be
used to disable the safe stack for individual functions even when enabled
globally.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6095
llvm-svn: 239762
In the long run, these two might be independent or we might to only
allow specific combinations. Until we have a corresponding request,
however, it is hard to do the right thing and choose the right
configuration options. Thus, just don't touch the options yet and
just modify the behavior slightly.
llvm-svn: 239531
This clarifies the relationship between instrumentation and sampling based PGO,
code coverage analysis and the different formats supported by sample
profiling.
llvm-svn: 238504
Note: __declspec is also temporarily enabled when compiling for a CUDA target because there are implementation details relying on __declspec(property) support currently. When those details change, __declspec should be disabled for CUDA targets.
llvm-svn: 238238
- Fix the formatting of the "Exceptions and SEH" section.
- Make the "Complete" text for "Thread-safe initialization of local
statics" green.
llvm-svn: 236706
The MSVC 2015 ABI utilizes a rather straightforward adaptation of the
algorithm found in the appendix of N2382. While we are here, implement
support for emitting cleanups if an exception is thrown while we are
intitializing a static local variable.
llvm-svn: 236697
In Objective-C some style guides use a style where assignment operators are
aligned, in an effort to increase code readability. This patch adds an option
to the format library which allows this functionality. It is disabled by
default for all the included styles, so it must be explicitly enabled.
The option will change code such as:
- (void)method {
NSNumber *one = @1;
NSNumber *twentyFive = @25;
}
to:
- (void)method {
NSNumber *one = @1;
NSNumber *twentyFive = @25;
}
Patch by Matt Oakes. Thank you!
Accidentally reformatted all the tests...
llvm-svn: 236100
NMake is a Make-like builder that comes with Microsoft Visual Studio.
Jom (https://wiki.qt.io/Jom) is an NMake-compatible build tool.
Dependency files for NMake/Jom need to use double-quotes to wrap
filespecs containing special characters, instead of the backslash
escapes that GNU Make wants.
Adds the -MV option, which specifies to use double-quotes as needed
instead of backslash escapes when writing the dependency file.
Differential Revision: http://reviews.llvm.org/D9260
llvm-svn: 235903
This uses the same class metadata currently used for virtual call and
cast checks.
The new flag is -fsanitize=cfi-nvcall. For consistency, the -fsanitize=cfi-vptr
flag has been renamed -fsanitize=cfi-vcall.
Differential Revision: http://reviews.llvm.org/D8756
llvm-svn: 233874
We are not able to make a reliable solution for using UBSan together
with other sanitizers with runtime support (and sanitizer_common).
Instead, we want to follow the path used for LSan: have a "standalone"
UBSan tool, and plug-in UBSan that would be explicitly embedded into
specific sanitizers (in short term, it will be only ASan).
llvm-svn: 232829
There are no widely deployed standard libraries providing sized
deallocation functions, so we have to punt and ask the user if they want
us to use sized deallocation. In the future, when such libraries are
deployed, we can teach the driver to detect them and enable this
feature.
N3536 claimed that a weak thunk from sized to unsized deallocation could
be emitted to avoid breaking backwards compatibility with standard
libraries not providing sized deallocation. However, this approach and
other variations don't work in practice.
With the weak function approach, the thunk has to have default
visibility in order to ensure that it is overridden by other DSOs
providing sized deallocation. Weak, default visibility symbols are
particularly expensive on MachO, so John McCall was considering
disabling this feature by default on Darwin. It also changes behavior
ELF linking behavior, causing certain otherwise unreferenced object
files from an archive to be pulled into the link.
Our second approach was to use an extern_weak function declaration and
do an inline conditional branch at the deletion call site. This doesn't
work because extern_weak only works on MachO if you have some archive
providing the default value of the extern_weak symbol. Arranging to
provide such an archive has the same challenges as providing the symbol
in the standard library. Not to mention that extern_weak doesn't really
work on COFF.
Reviewers: rsmith, rjmccall
Differential Revision: http://reviews.llvm.org/D8467
llvm-svn: 232788
This scheme checks that pointer and lvalue casts are made to an object of
the correct dynamic type; that is, the dynamic type of the object must be
a derived class of the pointee type of the cast. The checks are currently
only introduced where the class being casted to is a polymorphic class.
Differential Revision: http://reviews.llvm.org/D8312
llvm-svn: 232241
Update the doxygen configuration file and the Makefile build rules
to provide better output (simply use the default stylesheet and template
from the Doxygen distribution.)
This CL has upgrade doxygen.cfg.in to Doxygen 1.8.6.
llvm-svn: 232066
This is a recommit of r231150, reverted in r231409. Turns out
that -fsanitize=shift-base check implementation only works if the
shift exponent is valid, otherwise it contains undefined behavior
itself.
Make sure we check that exponent is valid before we proceed to
check the base. Make sure that we actually report invalid values
of base or exponent if -fsanitize=shift-base or
-fsanitize=shift-exponent is specified, respectively.
llvm-svn: 231711
It's not that easy. If we're only checking -fsanitize=shift-base we
still need to verify that exponent has sane value, otherwise
UBSan-inserted checks for base will contain undefined behavior
themselves.
llvm-svn: 231409
-fsanitize=shift is now a group that includes both these checks, so
exisiting users should not be affected.
This change introduces two new UBSan kinds that sanitize only left-hand
side and right-hand side of shift operation. In practice, invalid
exponent value (negative or too large) tends to cause more portability
problems, including inconsistencies between different compilers, crashes
and inadequeate results on non-x86 architectures etc. That is,
-fsanitize=shift-exponent failures should generally be addressed first.
As a bonus, this change simplifies CodeGen implementation for emitting left
shift (separate checks for base and exponent are now merged by the
existing generic logic in EmitCheck()), and LLVM IR for these checks
(the number of basic blocks is reduced).
llvm-svn: 231150
Change -fsanitize-memory-track-origins to be equivalent to
-fsanitize-memory-track-origins=2.
Track-origins=2 provides a lot more detailed reports at the cost of
some additional slowdown (ranging from none to, sometimes, 3x; ~3% average on
SPEC2006).
llvm-svn: 230644
Previously we allowed these casts only for constants declared in system
headers, which we assume are retain/release-neutral. Now also allow them
for constants in user headers, treating them as +0. Practically, this
means that we will now allow:
id x = (id)kMyGlobalConst;
But unlike with system headers we cannot mix them with +1 values:
id y = (id)(b ? kMyGlobalConst : [Obj newValAtPlusOne]); // error
id z = (id)(b ? kSystemGlobalConst: [Obj newValAtPlusOne]); // OK
Thanks to John for suggesting this improvement.
llvm-svn: 230534
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
This reapplies r230044 with a fixed configure+make build and updated
dependencies and testcase requirements. Over the last iteration this
version adds
- missing target requirements for testcases that specify an x86 triple,
- a missing clangCodeGen.a dependency to libClang.a in the make build.
rdar://problem/19104245
llvm-svn: 230423
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 3.
llvm-svn: 230305
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 2.
llvm-svn: 230089
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies.
llvm-svn: 230067
This patch introduces the -fsanitize=cfi-vptr flag, which enables a control
flow integrity scheme that checks that virtual calls take place using a vptr of
the correct dynamic type. More details in the new docs/ControlFlowIntegrity.rst
file.
It also introduces the -fsanitize=cfi flag, which is currently a synonym for
-fsanitize=cfi-vptr, but will eventually cover all CFI checks implemented
in Clang.
Differential Revision: http://reviews.llvm.org/D7424
llvm-svn: 230055
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
llvm-svn: 230044
If this flag is set, we error out when a module build is required. This is
useful in environments where all required modules are passed via -fmodule-file.
llvm-svn: 230006
They autotools build has a number of missing features, supports less
OS, architectures, build configurations, doesn't have any tests and
is hard to support in sync with CMake build.
llvm-svn: 229554
We appear to use 3.5.0 in the directory structure now. That's probably
unnecessary. We should probably let the micro releases update the docs
for the same minor version.
llvm-svn: 227127
Introduce the following -fsanitize-recover flags:
- -fsanitize-recover=<list>: Enable recovery for selected checks or
group of checks. It is forbidden to explicitly list unrecoverable
sanitizers here (that is, "address", "unreachable", "return").
- -fno-sanitize-recover=<list>: Disable recovery for selected checks or
group of checks.
- -f(no-)?sanitize-recover is now a synonym for
-f(no-)?sanitize-recover=undefined,integer and will soon be deprecated.
These flags are parsed left to right, and mask of "recoverable"
sanitizer is updated accordingly, much like what we do for -fsanitize= flags.
-fsanitize= and -fsanitize-recover= flag families are independent.
CodeGen change: If there is a single UBSan handler function, responsible
for implementing multiple checks, which have different recoverable setting,
then we emit two handler calls instead of one:
the first one for the set of "unrecoverable" checks, another one - for
set of "recoverable" checks. If all checks implemented by a handler have the
same recoverability setting, then the generated code will be the same.
llvm-svn: 225719
I'd be interested if the paragraph on Parse not knowing much about AST is
something folks agree with. I think this used to be true after rjmccall removed
the Action interface in r112244 and I believe it's still true, but I'm not sure.
(For example, ParseOpenMP.cpp does include AST/StmtOpenMP.h. Other than that,
Parse not using AST nodes much seems to be still true, though.)
llvm-svn: 224894
With alignment:
int aaaaaa = aa
+ bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
* cccccccccccccccccccccccccccccccc;
Without alignment:
int aaaaaa = aa
+ bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
* cccccccccccccccccccccccccccccccc;
This fixes llvm.org/PR21666.
llvm-svn: 223117
Change to original: ifndef out tests in Windows due to /-separated
paths.
Summary:
Often one is only interested in matches within the main-file or matches
that are not within a system-header, for which this patch adds
isInMainFile and isInSystemFile. They take no arguments and narrow down
the matches.
The isInFileMatchingName is mainly thought for interactive
clang-query-sessions, to make a matcher more specific without restarting
the session with the files you are interested in for that moment. It
takes a string that will be used as regular-expression to match the
filename of where the matched node is expanded.
Patch by Hendrik von Prince.
llvm-svn: 222765
Rethrowing exceptions in the MS model is very simple: just call
_CxxThrowException with nullptr for both arguments.
N.B. They chose stdcall as the calling convention for x86 but cdecl for
all other platforms.
llvm-svn: 222733
Summary:
Often one is only interested in matches within the main-file or matches
that are not within a system-header, for which this patch adds
isInMainFile and isInSystemFile. They take no arguments and narrow down
the matches.
The isInFileMatchingName is mainly thought for interactive
clang-query-sessions, to make a matcher more specific without restarting
the session with the files you are interested in for that moment. It
takes a string that will be used as regular-expression to match the
filename of where the matched node is expanded.
Patch by Hendrik von Prince.
llvm-svn: 222646
Improve the documentation for vim integration of clang-format. Prefer the use
of <c-o> to do the normal mode command execution to avoid side-effects of the
escape and re-insertion (cursor movement). Tweak the macros to use a double
return to avoid having to manually return control to the editor from the
subprocess.
llvm-svn: 220685
This allows a module to specify that it logically contains a file, but that
said file is non-modular and intended for textual inclusion. This allows
layering checks to work properly in the presence of such files.
llvm-svn: 220448
This is long-since overdue, and matches GCC 5.0. This should also be
backwards-compatible, because we already supported all of C11 as an extension
in C99 mode.
llvm-svn: 220244
#include_next interacts poorly with modules: it depends on where in the list of
include paths the current file was found. Files covered by module maps are not
found in include search paths when building the module (and are not found in
include search paths when @importing the module either), so this isn't really
meaningful. Instead, we fake up the result that #include_next *should* have
given: find the first path that would have resulted in the given file being
picked, and search from there onwards.
llvm-svn: 220177
This commit changes the way we blacklist global variables in ASan.
Now the global is excluded from instrumentation (either regular
bounds checking, or initialization-order checking) if:
1) Global is explicitly blacklisted by its mangled name.
This part is left unchanged.
2) SourceLocation of a global is in blacklisted source file.
This changes the old behavior, where instead of looking at the
SourceLocation of a variable we simply considered llvm::Module
identifier. This was wrong, as identifier may not correspond to
the file name, and we incorrectly disabled instrumentation
for globals coming from #include'd files.
3) Global is blacklisted by type.
Now we build the type of a global variable using Clang machinery
(QualType::getAsString()), instead of llvm::StructType::getName().
After this commit, the active users of ASan blacklist files
may have to revisit them (this is a backwards-incompatible change).
llvm-svn: 220097
Adds a Clang-specific implementation of C11's stdatomic.h header. On systems,
such as FreeBSD, where a stdatomic.h header is already provided, we defer to
that header instead (using our __has_include_next technology). Otherwise, we
provide an implementation in terms of our __c11_atomic_* intrinsics (that were
created for this purpose).
C11 7.1.4p1 requires function declarations for atomic_thread_fence,
atomic_signal_fence, atomic_flag_test_and_set,
atomic_flag_test_and_set_explicit, and atomic_flag_clear, and requires that
they have external linkage. Accordingly, we provide these declarations, but if
a user elides the shadowing macros and uses them, then they must have a libc
(or similar) that actually provides definitions.
atomic_flag is implemented using _Bool as the underlying type. This is
consistent with the implementation provided by FreeBSD and also GCC 4.9 (at
least when __GCC_ATOMIC_TEST_AND_SET_TRUEVAL == 1).
Patch by Richard Smith (rebased and slightly edited by me -- Richard said I
should drive at this point).
llvm-svn: 218957
being on by default. -fno-cxx-modules can still be used to enable C modules but
not C++ modules, but C++ modules is not significantly less stable than C
modules any more.
Also remove some of the scare words from the modules documentation. We're
certainly not going to remove modules support (though we might change the
interface), and it works well enough to bootstrap and build lots of
non-trivial code.
Note that this does not represent a commitment to the current interface nor
implementation, and we still intend to follow whatever direction the C and C++
committees take regarding modules support.
llvm-svn: 218717
The attribute documentation now conforms to Aaron Ballman's renaming of the
thread safety attributes, as well as the new paper that is due to be published
in the conference on Source Code Analysis and Manipulation (SCAM 2014) later
this week. In addition, recent changes to the analysis, such as checking
of references and negative capabilities, are now documented.
llvm-svn: 218420
The reasoning is that this construct is accepted by all compilers and valid in
C++11, so it doesn't seem like a useful warning to have enabled by default.
Building with -pedantic, -Wbind-to-temporary-copy, or -Wc++98-compat still
shows the warning.
The motivation is that I built re2, and this was the only warning that was
emitted during the build. Both changing re2 to fix the warning and detecting
clang and suppressing the warning in re2's build seem inferior than just giving
the compiler a good default for this warning.
Also move the cxx98compat version of this warning to CXX98CompatPedantic, and
update tests accordingly.
llvm-svn: 218008
On a single line:
switch (a) {
case 1: x = 1; return;
case 2: x = 2; return;
default: break;
}
Not on a single line:
switch (a) {
case 1:
x = 1;
return;
case 2:
x = 2;
return;
default:
break;
}
This partly addresses llvm.org/PR16535. In the long run, we probably want to
lay these out in columns.
llvm-svn: 217501
Summary:
This patch implements a new UBSan check, which verifies
that function arguments declared to be nonnull with __attribute__((nonnull))
are actually nonnull in runtime.
To implement this check, we pass FunctionDecl to CodeGenFunction::EmitCallArgs
(where applicable) and if function declaration has nonnull attribute specified
for a certain formal parameter, we compare the corresponding RValue to null as
soon as it's calculated.
Test Plan: regression test suite
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits, rnk
Differential Revision: http://reviews.llvm.org/D5082
llvm-svn: 217389
This makes use of the recently-added @llvm.assume intrinsic to implement a
__builtin_assume(bool) intrinsic (to provide additional information to the
optimizer). This hooks up __assume in MS-compatibility mode to mirror
__builtin_assume (the semantics have been intentionally kept compatible), and
implements GCC's __builtin_assume_aligned as assume((p - o) & mask == 0). LLVM
now contains special logic to deal with assumptions of this form.
llvm-svn: 217349
Added cast operations to the table of vector operations. Supported status 'no' means that there are no tests in the Clang test suite for the given cast.
llvm-svn: 217055
This permits to add a space after closing parenthesis of a C-style cast.
Defaults to false to preserve old behavior.
Fixes llvm.org/PR19982.
Before:
(int)i;
After:
(int) i;
Patch by Marek Kurdej.
llvm-svn: 217022
Summary:
This patch adds a runtime check verifying that functions
annotated with "returns_nonnull" attribute do in fact return nonnull pointers.
It is based on suggestion by Jakub Jelinek:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140623/223693.html.
Test Plan: regression test suite
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4849
llvm-svn: 215485
to instruct the code generator to not enforce a higher alignment
than the given number (of bytes) when accessing memory via an opaque
pointer or reference. Patch reviewed by John McCall (with post-commit
review pending). rdar://16254558
llvm-svn: 214911
This is required for GNU coding style, among others.
Also update the configuration documentation.
Modified from an original patch by Jarkko Hietaniemi, thank you!
llvm-svn: 214858
Aaron Ballman