Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
This is a resubmission of r242305 after it was reverted due to bad interactions with the stdio
thread.
llvm-svn: 242783
Summary:
This commit removes the stdio forwarding thread in lldb-server in favor of a MainLoop callback.
As in some situations we need to forcibly flush the stream ( => Read() is called from multiple
places) and we still have multiple threads, I have had to additionally protect the communication
instance with a mutex.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11296
llvm-svn: 242782
Make sure we dont treat EINTR as a fatal error. I was getting this when trying to profile the
debugger. I'm not sure why this wasn't surfacing before, it could be that the profiler is using
some signals internally.
llvm-svn: 242681
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
Summary:
It seems that reading of register data is the biggest bottleneck in LLGS at the moment. Sending
four registers instead of the full GPR set increases the jThreadsInfo processing time about
6-fold. Until we figure out where is this time going, this commit limits the amount of data we
send to provide a more fluid debugging experience.
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11264
llvm-svn: 242517
Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
This allows stepping operations that don't ever do a public stop to get all the info they need without having to send a jThreadsInfo packet since those tend to be large.
This patch will be followed by a patch that will detect when we do a public stop, and when that happens we will send a jThreadsInfo packet at that time to get all expedited registers and memory.
llvm-svn: 242352
This one I accidentally missed last time because I confused it with
the lldbUtility library. After this, all makefile libraries should
have the same names as their CMake counterparts.
llvm-svn: 242344
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
llvm-svn: 242305
should send when detaching and leaving the remote process/system
halted. Previously only the 'D' initial char was sent, which
resumed the process like a normal detach.
llvm-svn: 242256
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
Summary:
32-bit signed return value from ptrace got sign extended when being converted to
64-bit unsigned.
Also, replaced tabs with spaces in the source.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11047
llvm-svn: 241837
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
This is a resubmit of r241672, after it was reverted due to build failueres on non-linux
platforms.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241796
Summary:
This is used on non-unix platforms, where qXfer:libraries-svr4:read
doesn't make sense. Windows uses that for instance.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11036
llvm-svn: 241712
Summary:
This commit moves the Windows DyanamicLoader to the common DynamicLoader
directory. This is required to remote debug Windows targets.
This commit also initializes the Windows DYLD plugin in
SystemInitializerCommon (similarly to both POSIX and MacOSX DYLD
plugins) so that we can automatically instantiate this class when
connected to a windows process.
Test Plan: Build.
Reviewers: zturner
Subscribers: lldb-commits, abdulras
Differential Revision: http://reviews.llvm.org/D10882
llvm-svn: 241697
platform-specific symbols that are not implemented on OS X.
The build error that caused this is
Undefined symbols for architecture x86_64:
"lldb_private::NativeProcessProtocol::Attach(unsigned long long, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::AttachToProcess(unsigned long long) in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
"lldb_private::NativeProcessProtocol::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::LaunchProcess() in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 241688
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241672
This can be in the cpp file rather than the header file, so moving
it there.
Summary: Move ProcessKDP's StringExtractor include.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11018
llvm-svn: 241649
Summary:
Fix StringExtractor.h issues.
* source/Plugins/Process/MacOSX-Kernel/ProcessKDP.cpp
(#include "Utility/StringExtractor.h): Not needed, this is already
included by ProcessKDP.h
* unittests/Utility/StringExtractorTest.cpp
(#include "Utility/StringExtractor.h): Update include path to the
new location.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10995
llvm-svn: 241596
Previously we accepted a frame as correct result if the PC pointed
into an executable section of code. The isse with that approac is
that if we calculated PC correctly but messed up the value of CFA
then unwinding from the next fram will most likely fail.
With this change I modify the logic with keeping the requirement
for PC to point to an executable section and also check that we can
continue the unwind from the frame we calculated. If continuing from
the frame calculated with the primary unwind plan isn't working then
fall back to the fallback plan with the hope for a better frame (if
the fallback plan won't help then we acceot the frame from the
primary plan).
Differential revision: http://reviews.llvm.org/D10932
llvm-svn: 241434
Previously if the instruction emulation based unwind plan failed then
we fall back to the arch default unwind plan. Change it to fall back
to the eh_frame based one even on non call sites if we have eh_frame
as that one tend to be more reliable.
Differential revision: http://reviews.llvm.org/D10902
llvm-svn: 241334
Summary:
This changes PtraceWrapper to return an Error, while the actual result is in an pointer parameter
(instead of the other way around). Also made a couple of PtraceWrapper arguments default to zero.
This arrangement makes a lot of the code much simpler.
Test Plan: Tests pass on linux. It compiles on android arm64/mips64.
Reviewers: chaoren, mohit.bhakkad
Subscribers: tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10808
llvm-svn: 241079
Make the python target definition file have highest priority so that we can set
the remote stub breakpoint pc offset using it.
Reviewers: clayborg
Subscribers: ted, deepak2427, lldb-commits
Differential revision: http://reviews.llvm.org/D10775
llvm-svn: 241063
- Avoid sending the qfThreadInfo, qsThreadInfo packets if we have a stop reply packet with the threads already (save 2 round trip packets)
- Include the qname, qserial and qkind in the JSON info
- Report the qname, qserial and qkind to the thread so it can cache it to avoid many packets on MacOSX and iOS
- Don't clear all discoverable settings when we exec, just the ones we need to saves 1-5 packets for each exec.
llvm-svn: 240988
Summary:
This removes a lot of boilerplate, which was needed to execute monitor operations. Previously one
needed do declare a separate class for each operation which would manually capture all needed
arguments, which was very verbose. In addition to less code, I believe this also makes the code
more readable, since now the implementation of the operation can be physically closer to the code
that invokes it.
Test Plan: Code compiles on x86, arm and mips, tests pass on x86 linux.
Reviewers: tberghammer, chaoren
Subscribers: aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10694
llvm-svn: 240772
There are a couple of bugs in the XML register info handling which this patch fixes:
+ conflicting variable names in lambda, both capture list and parameters contains a variable called 'name'.
+ prev_reg_num, which sets the register number, should be incremented after each register is processed.
+ Windows errors regarding empty strings and the 'xi:' prefix disappearing from 'xi:include' node name.
Reviewers: clayborg
Subscribers: lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D10731
llvm-svn: 240768
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
The values of four important registers are included in logs for ptrace
PT_GETREGS. Put all four on the same line for a more compact log. Also
use the proper 64-bit register names.
llvm-svn: 240581
With the removal of ProcessLinux in r240543 this code is used only on
FreeBSD. FreeBSD isn't affected by whichever issue originally prompted
the addition of SetResumeState, so just remove it.
As discussed on the mailing list (and mentioned in a FIXME comment)
it shouldn't be called there.
llvm-svn: 240550
Summary:
Currently, the local-only path fails about 50% of the tests, which means that: a) nobody is using
it; and b) the remote debugging path is much more stable. This commit removes the local-only
linux debugging code (ProcessLinux) and makes remote-loopback the only way to debug local
applications (the same architecture as OSX). The ProcessPOSIX code is moved to the FreeBSD
directory, which is now the only user of this class. Hopefully, FreeBSD will soon move to the new
architecture as well and then this code can be removed completely.
Test Plan: Test suite passes via remote stub.
Reviewers: emaste, vharron, ovyalov, clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10661
llvm-svn: 240543
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
This patch adds a listener to the AynscThread in ProcessGDBRemote, specifically for dealing with any async notification packets.
From the broadcast our listener receives we can process the notify packet from the event data. A handler function then sets the thread stop info from this packet, and updates lldb by setting the process private state to stopped. Allowing the async thread to go back to sleep and getting the main thread to handle the implications of a state change.
When sending a vCont in nonstop mode we also get a different reply from all-stop mode, an OK response as opposed to a stop reply. So a condition is added to handle this and set the process state without the stop-reply data.
Reviewers: clayborg
Subscribers: lldb-commits, labath, ted, aidan.dodds, deepak2427
Differential Revision: http://reviews.llvm.org/D10544
llvm-svn: 240397
Pavel Labath