This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
Summary:
GetLoadedModuleFileSpec was reading /proc/pid/maps character by character, which was very slow,
since we do that for every shared library, which android tends to have a lot. Switching to
ProcFileReader saves us about 0.4 seconds in attach time.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D11460
llvm-svn: 243019
Summary:
This adds support for jstopinfo field of stop-reply packets. This field enables us to avoid
querying full thread stop data on most stops (see r242593 for more details).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11415
llvm-svn: 242997
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
This is a resubmission of r242305 after it was reverted due to bad interactions with the stdio
thread.
llvm-svn: 242783
Make sure we dont treat EINTR as a fatal error. I was getting this when trying to profile the
debugger. I'm not sure why this wasn't surfacing before, it could be that the profiler is using
some signals internally.
llvm-svn: 242681
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
llvm-svn: 242305
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
32-bit signed return value from ptrace got sign extended when being converted to
64-bit unsigned.
Also, replaced tabs with spaces in the source.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11047
llvm-svn: 241837
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
This is a resubmit of r241672, after it was reverted due to build failueres on non-linux
platforms.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241796
platform-specific symbols that are not implemented on OS X.
The build error that caused this is
Undefined symbols for architecture x86_64:
"lldb_private::NativeProcessProtocol::Attach(unsigned long long, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::AttachToProcess(unsigned long long) in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
"lldb_private::NativeProcessProtocol::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::LaunchProcess() in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 241688
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241672
Summary:
This changes PtraceWrapper to return an Error, while the actual result is in an pointer parameter
(instead of the other way around). Also made a couple of PtraceWrapper arguments default to zero.
This arrangement makes a lot of the code much simpler.
Test Plan: Tests pass on linux. It compiles on android arm64/mips64.
Reviewers: chaoren, mohit.bhakkad
Subscribers: tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10808
llvm-svn: 241079
Summary:
This removes a lot of boilerplate, which was needed to execute monitor operations. Previously one
needed do declare a separate class for each operation which would manually capture all needed
arguments, which was very verbose. In addition to less code, I believe this also makes the code
more readable, since now the implementation of the operation can be physically closer to the code
that invokes it.
Test Plan: Code compiles on x86, arm and mips, tests pass on x86 linux.
Reviewers: tberghammer, chaoren
Subscribers: aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10694
llvm-svn: 240772
Summary:
Currently, the local-only path fails about 50% of the tests, which means that: a) nobody is using
it; and b) the remote debugging path is much more stable. This commit removes the local-only
linux debugging code (ProcessLinux) and makes remote-loopback the only way to debug local
applications (the same architecture as OSX). The ProcessPOSIX code is moved to the FreeBSD
directory, which is now the only user of this class. Hopefully, FreeBSD will soon move to the new
architecture as well and then this code can be removed completely.
Test Plan: Test suite passes via remote stub.
Reviewers: emaste, vharron, ovyalov, clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10661
llvm-svn: 240543
SUMMARY:
This patch implements
1. Emulation of MIPS32 branch instructions
2. Enable single-stepping for MIPS32 instructions
3. Correction in emulation of MIPS64 branch instructions with delay slot
4. Adjust breakpoint address when breakpoint is hit in a forbidden slot of compact branch instruction
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, bhushan, lldb-commits, emaste, nitesh.jain
Differential Revision: http://reviews.llvm.org/D10596
llvm-svn: 240373
Summary:
Memory reads using the ptrace API need to be executed on a designated thread
and in 4-byte increments. The process_vm_read syscall has no such requirements
and it is about 50 times faster. This patch makes lldb-server use the faster
API if the target kernel supports it. Kernel support for this feature is
determined at runtime. Using process_vm_writev in the same manner is more
complicated since this syscall (unlike ptrace) respects page protection settings
and so it cannot be used to set a breakpoint, since code pages are typically
read-only. However, memory writes are not currently a performance bottleneck as
they happen much more rarely.
Test Plan: all tests continue to pass
Reviewers: ovyalov, vharron
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10488
llvm-svn: 239924
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
Summary:
Previously, we reported inferior receiving SIGSEGV (or SIGILL, SIGFPE, SIGBUS) as an "exception"
to LLDB, presumably to match OSX behaviour. Beside the fact that we were basically lying to the
user, this was also causing problems with inferiors which handle SIGSEGV by themselves, since
LLDB was unable to reinject this signal back into the inferior.
This commit changes LLGS to report SIGSEGV as a signal. This has necessitated some changes in the
test-suite, which had previously used eStopReasonException to locate threads that crashed. Now it
uses platform-specific logic, which in the case of linux searches for eStopReasonSignaled with
signal=SIGSEGV.
I have also added the ability to set the description of StopInfoUnixSignal using the description
field of the gdb-remote packet. The linux stub uses this to display additional information about
the segfault (invalid address, address access protected, etc.).
Test Plan: All tests pass on linux and osx.
Reviewers: ovyalov, clayborg, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10057
llvm-svn: 238549
Summary:
Previously, we wait()ed for events from the inferiors process group. This is resulted in a
failure if the inferior changed its process group in the middle of execution. To avoid this, I
pass -1 to the wait() call. The flag __WNOTHREAD makes sure we don't actually wait for events
from any process, but only the processes(threads) which are our children (or traced by us). Since
this happens on the monitor thread, which is dedicated to monitoring a single inferior, we will
be getting events only from this inferior.
Test Plan: All tests pass on linux. I have added a test to check the new functionality.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10061
llvm-svn: 238405
This change reorganize the register read/write code inside lldb-server on Linux
with moving the architecture independent code into a new class called
NativeRegisterContextLinux and all of the architecture dependent code into the
appropriate NativeRegisterContextLinux_* class. As part of it the compilation of
the architecture specific register contexts are only compiled on the specific
architecture because they can't be used in other cases.
The purpose of this change is to remove a lot of duplicated code from the different
register contexts and to remove the architecture dependent codes from the global
NativeProcessLinux class.
Differential revision: http://reviews.llvm.org/D9935
llvm-svn: 238196
Summary:
Previously, NPL tried to reinject SIGSTOP into the inferior in an attempt to get the process to
start in the group-stop state. This was:
a) wrong (reinjection should be controlled by "process handle" lldb setting)
b) racy (it should use Resume for transparent resuming instead of RequestResume)
c) broken (llgs crashed on inferior SIGSTOP)
With this change, SIGSTOP is handled just like any other signal delivered to the inferior: we
stop all threads and report signal reception to lldb. SIGSTOP reinjection does not behave the
same way as it would outside the debugger, but simulating this is a hard problem and is not
normally necessary.
Test Plan: I have added a test which verifies we get SIGSTOP reports and we do not crash.
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9852
llvm-svn: 237880
Summary:
There was an issue in NPL, where we attempted removal of temporary breakpoints (used to implement
software single stepping), while some threads of the process were running. This is a problem
since we currently always use the main thread's ID in the removal ptrace call. Therefore, if the
main thread was still running, the ptrace call would fail, and the software breakpoint would
remain, causing all kinds of problems. This change removes the breakpoints after all threads have
stopped. This fixes TestExitDuringStep on Android arm and can also potentially help in other
situations, as previously the breakpoint would not get removed if the thread stopped for another
reason.
Test Plan: TestExitDuringStep passes, other tests remain unchanged.
Reviewers: tberghammer
Subscribers: tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D9792
llvm-svn: 237448
Summary:
This is the same issue as we had in D9145 for thread creation. Going through the full
ThreadDidStop/RequestResume cycle can cause a deferred notification to fire, which is not correct
when we are ignoring an event and resuming the thread. In this case it doesn't matter much since
the thread will die after that anyway, but for correctness, we should do the same thing here.
Also treating the SIGTRAP case the same way.
Test Plan: Tests continue to pass.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9696
llvm-svn: 237445
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
The defult implementation falls back to GetRegisterCount what
includes the debug registers also what shouldn't be displayed to
the user.
llvm-svn: 237111
Summary:
NPL::Resume attempted to handle eStateStopped as a resume action. However:
- GDBRemoteCommunicationServerLLGS (the only user of NPL) never sets this action
- it could set this action in response to a vCont:t packet, but LLDB never produces this packet
- gdb-remote protocol documentation says vCont:t packet is used only in non-stop mode, but LLDB
does not support non-stop mode
- even if LLDB supported non-stop mode, this implementation of eStateStopped does something
different from what the spec says it should (according to spec, it should stop the specified
thread, but this seems to want to stop all threads).
Given the facts above, I believe we should remove this unused and untested code, as it probably
doesn't even work and removing it makes the rest of the code noticably simpler.
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9657
llvm-svn: 237103
Summary:
Since the former-TSC events are now processed synchronously, there is no need for to protect them
with a separate mutex - all the actions are now guarded by the big m_threads_mutex.
With the mutex gone, the following functions, no longer have any purpose and were removed:
NotifyThreadCreate: replaced by direct calls to ThreadWasCreated
NotifyThreadStop: replaced by direct calls to ThreadDidStop
NotifyThreadDeath: folded into StopTrackingThread
ResetForExec: inlined as it consisted of a single line of code
RequestThreadResume(AsNeeded): replaced by direct calls to ResumeThread
StopThreads: removed, as it was never called
Test Plan: tests continue to pass
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9603
llvm-svn: 237101
Summary:
Now that all thread events are processed synchronously, there is no need to have separate records
of whether a thread is running. This changes the (ever-dwindling) remains of the TSC to use
NativeThreadLinux as the authoritative source of the state of threads. The rest of the
ThreadContext we need has been moved to a member of NTL.
Test Plan: ninja check-lldb continues to pass
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9562
llvm-svn: 236983
Summary:
The stop callback is a remnant of the ThreadStateCoordinator. We don't need it now that TSC is
gone, as we know exactly which function to call when threads stop. This also removes some
stop-related functions, which were just forwarding calls to one another.
Test Plan: ninja check-lldb continues to pass
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9531
llvm-svn: 236814
Summary:
These are remnants of the thread state coordinator, which are now unnecessary. I have basically
inlined the callbacks. No functional change.
Test Plan: Tests continue to pass.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9343
llvm-svn: 236707
Summary:
The lambda was always calling SetState(eStateStopped) with small variations, so I have inlined
the code. Given that we don't have the TSC anymore, I believe we don't need to be so generic.
The only major change here is the way we choose a stop reason thread when we're interrupting a
program on client request. Previously, we were setting a null stop reason for all threads and
then fixing up the reason for one victim thread in the lambda. Now, I make sure the stop reason
is set for the victim thread correctly in the first place.
I also take the opportunity to rename CallAfter* functions into something more appropriate.
Test Plan: All tests continue to pass.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9321
llvm-svn: 236595
Summary:
Since all TSC operations are now executed synchronously, TSC has become a little more than a
messenger between different parts of NativeProcessLinux. Therefore, the reason for its existance
has disappeared.
This commit moves the contents of the TSC into the NPL class. This will enable us to remove all
the boilerplate code in NPL (as it stands now, this is most of the class), which I plan to do in
subsequent commits.
Unfortunately, this also means we will lose the unit tests for the TSC. However, since the size
of the TSC has diminished, the unit tests were not testing much at this point anyway, so it's not
a big loss.
No functional change.
Test Plan: All tests continue to pass.
Reviewers: vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9296
llvm-svn: 236587
Summary:
This is a cleanup patch for thread state coordinator. After making processing of all events
synchronous, there is no need to have a a separate class for each event. I have moved back
processing of all events back into the TSC class. No functional change.
Test Plan: All tests continue to pass.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9254
llvm-svn: 236576
Summary:
This change removes the thread state coordinator thread by making all the operations it was
performing synchronous. In order to prevent deadlock, NativeProcessLinux must now always call
m_monitor->DoOperation with the m_threads_mutex released. This is needed because HandleWait
callbacks lock the mutex (which means the monitor thread will block waiting on whoever holds the
lock). If the other thread now requests a monitor operation, it will wait for the monitor thread
do process it, creating a deadlock.
To preserve this invariant I have introduced two new Monitor commands: "begin operation block"
and "end operation block". They begin command blocks the monitor from processing waitpid
events until the corresponding end command, thereby assuring the monitor does not attempt to
acquire the mutex.
Test Plan: Run the test suite locally, verify no tests fail.
Reviewers: vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9227
llvm-svn: 236501
Summary:
NativeProcessProtocol uses ReadMemory internally for setting/checking
breakpoints but also for generic memory reads (Handle_m), this change adds a
ReadMemoryWithoutTrap for that purpose. Also fixes a bunch of misuses of addr_t
as size/length.
Test Plan: `disassemble` no longer shows the trap code.
Reviewers: jingham, vharron, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9330
llvm-svn: 236132
Summary:
Without the synchronisation between the two thread creation events the following case could
happen:
- threads A and B are running. A hits a breakpoint. We note that we want to stop B.
- before we could stop it, B creates a new thread C, we get the stop notification for B, but we
don't record C's existence yet.
- we resume B
- before we get the C notification, B stops again (e.g. hits a breakpoint, gets our SIGSTOP,
etc.)
- we see all known threads have stopped, and we notify LLDB
- C notification comes, we note it's existence and resume it
=> we have an inconsistent state (LLDB thinks we've stopped, but C is running)
I resolve this by doing a blocking wait for for the C notification when we get the creation
notification on the parent (B) thread. This way the two events are synchronised, but we don't
need to introduce the intermediate "launching" state which would complicate handling of thread
states as all code would need to be aware of the third possible state.
Test Plan:
This is an obscure corner case, which I had not observed in practise, so I have no
test for it. I have tested that this commit does not regress in existing tests though.
Reviewers: chaoren, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9217
llvm-svn: 235969
The previous read callback always read the value of the register what
caused problems when the emulator wrote some value into a register and
then expected to read the same value back. This CL add a register value
cache into the callbacks to return the correct value after a register
write also.
Test Plan: Stepping over BL/BLX instruction works on android-arm if the instruction set isn't change (other, unrelated patch will come for the case when we move to an other instruction set)
Reviewers: omjavaid, sas, clayborg
Reviewed By: clayborg
Subscribers: labath, tberghammer, rengolin, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D9187
From: Tamas Berghammer <tberghammer@google.com>
llvm-svn: 235852
Summary:
LLGS leaks pipes (when launched by lldb), sockets (when launched by platform),
and/or log file to the inferior. This should prevent all possible leaks.
Reviewers: vharron, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9211
llvm-svn: 235615
The following situation occured if we were stopping a process (due to breakpoint, watchpoint, ...
hit) while a new thread was being created.
- process has two threads: A and B.
- thread A hits a breakpoint: we send a STOP signal to thread B and register a callback with
ThreadStateCoordinator to send a stop notification after the thread stops.
- thread B stops, but not due to the SIGSTOP, but on a thread creation event (of a new thread C).
We are unaware of our desire to stop, so we queue ThreadStopped and RequestResume operations
with TSC, so the thread can continue running.
- TSC receives the ThreadStopped event, sees that all threads are stopped and fires the delayed
stop notification.
- immediately after that TSC gets the RequestResume operation, so it resumes the thread.
At this point the state is inconsistent because LLDB thinks the process is stopped and will start
issuing commands to it, but one of the threads is in fact running. Things eventually break.
I address this problem by omitting the two TSC events altogether and Resuming the thread B
directly. This way the short stop is invisible to the TSC and the delayed notification will not
fire. We will fire the notification when we actually process the SIGSTOP on thread B.
When we get the initial SIGSTOP for thread C, we also resume the thread and send a
ThreadWasCreated message (is_stopped = false) to the TSC. This way, the TSC can stop the thread
on its own and handle the stop event later. This way the state of the new thread is correctly
handled as well (thanks Chaoren for the idea).
This patch also removes the synchronisation between the thread creation notifications on threads
B and C. The need for this synchronisation is unclear (the comments seem to hint that the new
thread is "fully created" only after we process both events, but I have noticed no regressions in
treating it as "created" even after just processing the initial C event), but it is a source for
many kinds of obscure races, since it introduces a new thread state "Launching" and the rest of
the code does not handle this state at all (what happens if we get a resume request from LLDB
while this thread is launching? what happens if we get a stop request? etc.).
This fixes the "spurious $O packet" problem in TestPrintStackTraces.py. However, the test remains
disabled on i386 due to the VDSO issue.
Test Plan:
TestPrintStackTraces works on x86_64. No regressions in the rest of the test suite.
Reviewers: vharron, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9145
llvm-svn: 235579
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
On linux-arm we use software single stepping where setting the new
breakpoint is only possible while the process is in stopped state.
This CL moves the setup code for single stepping form the SigneStep
operation into the Resum method to avoid an error when the process
already started when we want to step one of the thread.
Differential revision: http://reviews.llvm.org/D9108
llvm-svn: 235494
Summary:
This commit moves the functionality of the operation thread into the new monitor thread. This is
required to avoid a kernel race between the two threads and I believe it actually makes the code
cleaner.
Test Plan: Ran the test suite a couple of times, no regressions.
Reviewers: ovyalov, tberghammer, vharron
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9080
llvm-svn: 235304
The arm instruction emulation handles only some of the opcode (including
all of them modifying the PC). For the rest of the instructions we can
advance the PC by the size of the instruction as they don't modify the
PC on any other way.
Differential revision: http://reviews.llvm.org/D9076
llvm-svn: 235292
Summary:
This is the first phase of the merging of Monitor and Operation threads in NativeProcessLinux
(which is necessary since the two threads race inside Linux kernel). Here, I reimplement the
Monitor thread do use non-blocking waitpid calls, which enables later addition of code from the
operation thread.
Test Plan: Ran the test suite a couple of times, no regressions detected.
Reviewers: vharron, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9048
llvm-svn: 235193
Linux arm don't support hardware stepping (neither mismatch
breakpoints). This patch implement signle stepping with doing a software
emulation of the next instruction and then setting a temporary
breakpoint at the address where the thread will stop next.
Differential revision: http://reviews.llvm.org/D8976
llvm-svn: 234987
This patch is major step towards supporting lldb on ARM.
This adds all the required bits to support register manipulation on Linux Arm.
Also adds utility enumerations, definitions and register context classes for arm.
llvm-svn: 234870
The automatic conversion from long int to lldb::addr_t caused sign
extension but for a register read it is an unwanted behaviour. Fix with
forcing different conversion path.
llvm-svn: 233176
Previously the remote module sepcification was fetched only from the
remote platform. With this CL if we have a remote process then we ask it
if it have any information from a given module. It is required because
on android the dynamic linker only reports the name of the SO file and
the platform can't always find it without a full path (the process can
do it based on /proc/<pid>/maps).
Differential revision: http://reviews.llvm.org/D8547
llvm-svn: 233061
Test Plan: No tests, this is just a debug logging function.
Reviewers: tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8453
llvm-svn: 232815
So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".
llvm-svn: 232653
Some linux kernel reports a watchpoint hit after single stepping even
when no watchpoint was hit. This CL looks for a watchpoint which was hit
and reports a stop by trace if it haven't found any.
Differential revision: http://reviews.llvm.org/D8081
llvm-svn: 232482
This CL change the logic used to terminate the monitor thread of
NativeProcessLinux to use a signal instead of pthread_cancel as
pthread_cancel is not supported on android.
Differential revision: http://reviews.llvm.org/D8205
llvm-svn: 232155
This was previously initialized by ProcessGDBRemote::Initialize but lldb-server does not contain ProcessGDBRemote anymore so this needs to be initialized directly.
Differential Revision: http://reviews.llvm.org/D8186
llvm-svn: 231966
Thic change have effect wehn the AVX registers aren't available with
reporting the count of user registers without them.
Differential revision: http://reviews.llvm.org/D8111
llvm-svn: 231638
Previously it was initialized by ProcessLinux but lldb-server don't
contain ProcessLinux anymore so it have to be initialized by
NativeProcessLinux also.
Differential revision: http://reviews.llvm.org/D8080
llvm-svn: 231482
The deadlock occurred when the Attach or the Launch operation failed for
any reason.
Differential revision: http://reviews.llvm.org/D8030
llvm-svn: 231231
Previously the operation thread is stopped with a cancel event but
pthread_cancel is not supported on android. This CL creates a custom
operation which asks the operation thread to exit without any pthread
call.
Differential revision: http://reviews.llvm.org/D7937
llvm-svn: 230945
Summary:
syscalls involving pid/tid on 32 bit binaries are failing with
"Invalid argument" because the uint64_t arguments are too wide.
Reviewers: clayborg, ovyalov, sivachandra
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7963
llvm-svn: 230817
Summary:
They'll be set anyway when the thread starts running, so the launching threads
should just ignore the set request.
Reviewers: ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7914
llvm-svn: 230671
Add O_TRUNC when opening file for redirecting stdout and stderr of the
process. It is neccessary because if the file exists then on some
platform the original content is kept while it isn't overwritten by the
new data causing pollution of the saved stdout and stderr.
llvm-svn: 230492
Currently it is uses the same code used on linux. Will be replaced with
android specific code if needed.
Differential Revision: http://reviews.llvm.org/D7613
llvm-svn: 229371
'-Winconsistent-missing-override' warning. I suggest folks use this to
ensure that override is consistently used to mark virtual function
overrides.
llvm-svn: 229084
Summary:
After closing all the leaked file descriptors to the inferior tty, the following problem occured:
- when stdin, stdout and stderr are redirected, there are no slave descriptors open (which is good)
- lldb has a reader thread, which attempts to read from the master end of the tty
- this thread receives an EOF
- in response, it closes it's master end
- as this is the last open file descriptor for the master end, this deletes the tty and sends
SIGHUP to the inferior (this is bad)
I fix this problem by making sure the master end remains open for the duration of the inferior
process by storing a copy of the file descriptor in ProcessMonitor. I create a copy to avoid
ownership issues with the reading thread.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7440
llvm-svn: 228391
* Fix cmake script for android x86
* Reorder includes to avoid collision between system macros and local
variables in clang framework
Differential Revision: http://reviews.llvm.org/D7435
llvm-svn: 228388
* Set the state of the process into running/stepping on continue/step operations
* Add mutex to use transactions in Thread State Coordinator
** It is required because the events from two Signal Handler or form a Signal handler and a Resume request shouldn't overlap
* Send Stop Replay Packet only when the state of the process changed
Differential Revision: http://reviews.llvm.org/D7374
llvm-svn: 228387
Summary:
Both LLDB and LLGS are leaking file descriptors into the debugged process. This plugs the leak by
closing the unneeded descriptors. In one case I use O_CLOEXEC, which I hope is supported on
relevant platforms. I also added a regression test and plugged a fd leak in dosep.py.
Reviewers: vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7372
llvm-svn: 228130
Remove implicit stop action on $vCont package for threads where no
explicit action or default action specified based on the specification
(they have to stay in there original state).
llvm-svn: 227933
NativeProcessLinux::MonitorSignal was automatically resuming threads
that stopped due to a signal. This is inconsistent with the
behavior of lldb and gdb. This change removes the automatic resume.
Fixes
TestSendSignal.py
TestSignalsAPI.py
if PLATFORM_LINUX_FORCE_LLGS_LOCAL is in the environment vars.
llvm-svn: 227918
Note this code path should not happen - it implies a bug in another part of
the code. For the thread to receive the stop signal as it is handled, the
and for it to already have a stop reason, it implies the kernel was able to
tell the thread that it stopped while it was stopped. More likely this
seems to indicate a bug where an actual thread start was not getting correctly
logged. If it does get hit, we'll want to understand the sequence to figure
out if it is truly legitimate or if it implies another bug.
llvm-svn: 227916
It looks like Shawn's fix addresses what the initial hijacking was trying
to accomplish per conversations with Greg and Jim. The hijacking was
causing several tests to hang (#61, #62, #63, #64, #67, possibly more).
These tests now just fail rather than hang with this modification.
llvm-svn: 227914
* When the thread state coordinator is told to skip sending a stop request
for a running thread that is ignored (e.g. the thread that steps in a
step operation is technically running and should not have a stop sent
to it, since it will stop of its own accord per the kernel step operation),
ensure the deferred signal notification logic still waits for the
skipped thread. (i.e. we want to defer the notification until the
stepping thread is indeed stopped, we just don't want to send it a tgkill).
* Add ThreadStateCoordinator::RequestResumeAsNeeded(). This variant of the
RequestResume() method does not call the error function when the thread
is already running. Instead, it just logs that the thread is already
running and skips the resume operation. This is useful for the case of
vCont;c handling, where we tell all threads that they should be running.
At the place we're calling, all we know is "we want this thread running if
it isn't already," and that's exactly what this command does.
* Formatting change (minor) in NativeThreadLinux logging.
llvm-svn: 227913
See https://github.com/tfiala/lldb/issues/75. Not fixed yet but
continuing to push this further.
Fixes:
* Resume() now skips doing deferred notifications if we're doing a
vCont;{c,C}. In this case, we're trying to start something up,
not defer a stop notification. The default thread action stop
mode pickup was triggering a stop because it had at least one
stop, which was wrong in the case of a continue. (Bug introduced
by previous change.)
* Added a variant to ThreadStateCoordinator to specify a set of
thread ids to be skipped when triggering stop notifications to
non-stopped threads on a deferred signal call. For the case of
a stepping thread, it is actually told to step (and is running)
for a brief moment, but the thread state coordinator would think
it needed to send the stepping thread a stop, which id doesn't
need to do. This facility allows me to get around that cleanly.
With this change, behavior is now reduced to something I think is
essentially a different bug:
* Doing a step into libc code from my code crashes llgs.
* Doing a next out of a function in my own code crashes llgs.
llvm-svn: 227912
Tracked down while working on https://github.com/tfiala/lldb/issues/75.
This is not a complete fix for that issue, but moves us farther along.
Fixes:
* When a thread step is requested via vCont:{s,S}, Resume() now marks
the stepping thread as (1) currently stepping and (2) does trigger
the deferred signal for the stepped thread. This fixes a bug where
we were actually triggering a deferred stop cycle here for the non-stepping
thread since the single step thread was not part of the Resume()
deferred signal mechanism. The stepping thread is also marked in
the thread state coordinator as running (via a resume callback).
* When we get the SIGTRAP signal for the step completion, we don't
do a deferred signal call - that happened during the vCont:{s,S}
processing in Resume() already. Now we just need to mark that
the stepping thread is now stopped. If this is the last thread
in the set that needs to stop, it will trigger the process/delegate
stop call that will notify lldb. Otherwise, that'll happen when
the final thead we're waiting for stops.
Misc:
* Fixed up thread stop logging to use a leading 0 (0x%PRIx32) so
we don't get log lines like 0x5 for 0x05 SIGTRAP.
llvm-svn: 227911
* Fixed bug in run loop where run loop return enum was being treated
erroneously like an int, causing the TSC event loop to terminate
prematurely.
* Added an explicit scope in NativeProcessLinux::Resume() for the
threads lock lifetime. (This was likely unnecessary but is
more explicit.)
* Fixed a bug in ThreadStateCoordinator where resume execution was
not updating the internal state about the thread assumed to be
running now. I'll add a test and upstream this in a moment.
* Added a verbose logging mechanism to event processing within
ThreadStateCoordinator. It is currently enabled when the
'log enable lldb thread' is true upon inferior launch/attach.
llvm-svn: 227909
LLDB supports many different register numbering schemes, and these
are typically prefixed with an indicator that lets the user know
what numbering scheme is used. The gcc numbering scheme is
prefixed with gcc, and there are similar ones for dwarf, gdb,
and gcc_dwarf.
LLDB also contains its own internal numbering scheme, but the enum
for LLDB's numbering scheme was prefixed differently. This patch
changes the names of these enums to use the same naming scheme for
the enum values as the rest of the register kinds by removing gpr_
and fpu_ prefixes, and instead using lldb_ prefixes for all enum
values.
Differential Revision: http://reviews.llvm.org/D6351
Reviewed by: Greg Clayton
llvm-svn: 222495
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
See http://reviews.llvm.org/D5695 for details.
This change does the following:
Enable lldb-gdbserver (llgs) usage for local-process Linux debugging.
To turn on local llgs debugging support, which is disabled by default, enable this setting:
(lldb) settings set platform.plugin.linux.use-llgs-for-local true
Adds a stream-based Dump() function to FileAction.
Pushes some platform methods that Linux (and FreeBSD) will want to share with MacOSX from PlatformDarwin into PlatformPOSIX.
Reviewed by Greg Clayton.
llvm-svn: 219457
Adds a test to verify that a thread resume request marks the thread as running
after doing the resume callback. This test fails without the corresponding
ThreadStateCoordinator.cpp change.
Fixes the code where that state was not maintained.
llvm-svn: 219412
Added tests and impl to make sure the following errors are reported:
* Notifying a created thread that we are already tracking.
* Notifying a thread death for a thread we don't know about.
llvm-svn: 218900
Now that ThreadStateCoordinator errors out on threads in unexpected states,
it has enough information to know which threads need stop requests fired
when we want to do a deferred callback on a thread's behalf. This change
adds a new method, CallAfterRunningThreadsStop(...), which no longer
takes a set of thread ids that require stop requests. It's much harder
to misuse this method and (with newer error logic) it's harder to
correctly use the original method. Expect the original method that takes
the set of thread ids to stop to disappear in the near future.
Adds several tests for CallAfterRunningThreadsStop().
llvm-svn: 218897
Added tests to verify that the coordinator signals an error if
the given thread to resume is unknown, and if the thread is through to
be running already.
Modified resume handling code to match tests.
llvm-svn: 218872
ThreadStateCoordinator changes:
* Most commands that run in the queue now take an error handler that
will be called with an error string if an error occurs during processing.
Errors generally stop the operation in progress. The errors are checked
at time of execution. This is intended to help flush out ptrace/waitpid/state management
issues as quickly as possible.
* Threads now must be known to the coordinator before stops can be reported,
resumes can be requested, thread deaths can be reported, or deferred stop
notifications can be made. Failure to know the thread will cause the coordinator
to call the error callback for the event being processed. Threads are introduced
to the system by the NotifyThreadCreate method.
* The NotifyThreadCreate method now takes the initial state of the thread being
introduces to the system. We no longer just assume the thread is running.
The test cases were cleaned up, too:
* A gtest test fixture is now used, which allows creating less verbose helper
methods that setup common pieces of callback code for some method invocations.
Net result: the tests are simpler to read and shorter to write.
llvm-svn: 218833
ThreadIDFunc => ThreadIDFunction
LogFunc => LogIDFunction
We try to avoid abbreviations/shortened names. Adjusted function parameter names
as well to replace _func with _function.
llvm-svn: 218773
There is a state transition that seems potentially buggy that I am capturing and
logging here, and including an explicit test to demonstrate expected behavior. See new test
for detailed description. Added logging around this area since, if we hit it, we
may have a usage bug, or a new state transition we really need to investigate.
This is around this scenario:
Thread C deferred stop notification awaiting thread A and thread B to stop.
Thread A stops.
Thread A requests resume.
Thread B stops.
Here we will explicitly signal the deferred stop notification after thread B
stops even though thread A is now resumed. Copious logging happens here.
llvm-svn: 218683
The thread resume block is executed in the normal flow of thread
state queued event processing. The tests verify that it is executed
when we track the thread to be stopped and skipped when we track
it to already be running.
llvm-svn: 218638
Also added a test for the reset handling. The reset/state clearing happens
as a processed queue event. The only diff vs. standard processing is that
the exec clears the queue before queueing the activity to clear internal state.
i.e. once we get an exec, we really stop doing any other queue-based activity.
llvm-svn: 218629
A new thread arriving while a pending signal notification
is outstanding will (1) add the new thread to the list of
stops expected before the deferred signal notification is
fired, (2) send a stop request for the new thread, and
(3) track the new thread as currently running.
llvm-svn: 218578
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Tested two pending stops before notification, where one of the pending stop
requirements was already known to be stopped.
Tested pending thread stop before notification, then reporting thread with
pending stop died and verifies pending notification is made.
llvm-svn: 218559
Glad I did - caught a bug where the auto variable was not a reference
to a set and instead was a copy. I need to review rules on that!
llvm-svn: 218558
This change does the following:
* Remove test/c++/...
* Add gtest.
* Add gtest/unittest directory for unittesting individual classes.
* Add an initial Plugins/Process?linux/ThreadStateCoordinatorTest.cpp.
- currently failing a test (intentional).
- added a bare-bones ThreadStateCoordinator.cpp to Plugins/Process/Linux,
more soon. Just enough to prove out running gtest on Ubuntu and MacOSX.
* Added recursive make machinery so that doing a 'make' in gtest/ is
sufficient to kick off the existing test several directories down.
- Caveat - I currently short circuit from gtest/unittest/Makefile directly to
the one and only gtest/unittest/Plugins/Process/Linux directory. We'll need
to add the intervening layers. I haven't done this yet since to fix the
Xcode test failure correspondence, I may need to add a python layer which
might just handle the directory crawling.
* Added an Xcode project to the lldb workspace for gtest.
- Runs the recursive make system in gtest/Makefile.
- Default target is 'test'. test and clean are supported.
- Currently does not support test failure file/line correspondence.
Requires a bit of text transformation to hook that up.
llvm-svn: 218460
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
Apparently, PEEKUSER/POKEUSER is something x86 specific, so I had to rework it for AArch64. This fixes assertion that occurs whenever lldb started on AArch64 device tried to read PC register (or any other register)
See http://reviews.llvm.org/D5232 for more details.
Change by Paul Osmialowski.
llvm-svn: 217691
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This makes sure that nothing that requires Python is being built
when the LLDB_DISABLE_PYTHON flag is being passed in.
It also changes a use of CPPFLAGS to CPP.Flags since the former is overridden
when external flags are passed in while the later is not. I'm not sure exactly
why LLDB_DISABLE_PYTHON is in CXXFLAGS rather than CPPFLAGS,
but cleaning that up is for another commit.
Differential Revision: http://reviews.llvm.org/D4918
llvm-svn: 217414
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
Yet another step toward ARM64 support. With this commit, lldb-gdbserver started on ARM64 target can be accessed by lldb running on desktop PC and it can process simple commands (like 'continue'). Still ARM64 support lacks NativeRegisterContextLinux_arm64.* code which waits to be implemented.
Based on similar files for Linux x86_64 and Darwin ARM64. Due to common code extraction from Darwin related files, lldb should be tested for any unexpected regression on Darwin ARM64 machines too.
See the following for more details:
http://reviews.llvm.org/D4580http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012670.html
Change by Paul Osmialowski.
llvm-svn: 216737
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
I copied this originally based on what debugserver was doing. This appears to
be incorrect and unncessary for Linux. The LinuxSignals on the lldb side
don't look for these and therefore they get handled incorrectly.
Leaving the hook in place since I think darwin will continue to need to
translate those signal numbers.
llvm-svn: 216564
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
Added llgs/debugserver gdb-remote tests around SIGABRT and SIGSEGV signal reception
notification. Found a few bugs in exception signal handling in Linux llgs. Fixed those.
llvm-svn: 215458
These fix the broken debian lldb build, which is using g++ 4.7.2.
TypeFormat changes:
1. stopped using the C++11 "dtor = default;" construct.
The generated default destructor in the two derived classes wanted
them to have a different throws() semantic that was causing 4.7 to
fail to generate it. I switched these to empty destructors defined
in the .cpp file.
2. Switched the m_types map from an ordered map to an unordered_map.
g++ 4.7's c++ library supports the C++11 emplace() used by TypeFormat
but the same c++ library's map impl does not. Since TypeFormat didn't
look like it depended on ordering in the map, I just switched it to
a std::unordered_map.
NativeProcessLinux - g++ 4.7 chokes on lexing the "<::" in
static_cast<::pid_t>(wpid). g++ 4.8+ and clang are fine with it.
I just put a space in between the "<" and the "::" and that cleared
it up.
llvm-svn: 212681
See http://reviews.llvm.org/D4366 for details.
Change by Paul Paul Osmialowski
Today this is the only problem that I'm facing trying to cross-compile lldb for AArch64 using Linaro's toolchain.
PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS, PTRACE_SETFPREGS are not defined for AArch64
These things can be defined different ways for other architectures, e.g. for x86_64 Linux, asm/ptrace-abi.h defines them as preprocessor constants while sys/ptrace.h defines them in enum along with corresponding PT_* preprocessor constants
NativeProcessLinux.cpp includes sys/ptrace.h
To avoid accidental redefinition of enums with preprocessor constants, I'm proposing this patch which first checks for PT_* preprocessor constants then checks for PTRACE_* constants then when it still can not find them, it defines preprocessor constants.
Similar approach was already used for PTRACE_GETREGSET and PTRACE_SETREGSET constants; in this case however it was easier, since enum values in sys/ptrace.h and preprocessor constants shared all exactly the same names (e.g. there's no additional PT_GETREGSET name defined).
llvm-svn: 212225
There were a few places where we were not catching the possibility of negative
error codes in waitpid() calls. This change fixes those remaining after
the llgs branch fixes to ProcessMonitor.
Change by Shawn Best.
llvm-svn: 212107
Also moves NativeRegisterContextLinux* files into the Linux directory.
These, like NativeProcessLinux, should only be built on Linux or a cross
compiler with proper headers.
llvm-svn: 212074
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Both NativeProcessLinux (in llgs branch) and Linux Host.cpp had similar code to handle /proc
file reading. I factored that out into a new Linux-specific ProcFileReader class and added a method
that the llgs branch will use for line-by-line parsing.
This change also adds numerous Linux-specific files to Xcode that were missing from the Xcode
project files.
Related to https://github.com/tfiala/lldb/issues/27
llvm-svn: 212015
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
On FreeBSD ptrace(PT_KILL) is used to terminate the traced process
(as if PT_CONTINUE had been used with SIGKILL as the signal to be
delivered), and is the desired behaviour for ProcessPOSIX::DoDestroy.
On Linux, after ptrace(PTRACE_KILL) the traced process still exists
and can be interrogated. It is only upon resume that it exits as though
it received SIGKILL.
As the Linux PTRACE_KILL behaviour is not used by LLDB, rename
BringProcessIntoLimbo to Kill, and change the implementation to simply
call kill() instead of using ptrace.
Thanks to Todd F for testing (Ubuntu 12.04, gcc 4.8.2).
Sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3159
llvm-svn: 205337
Fix Windows build by adding JITLoaderGDB and ProcessElfCore.
RegisterContext: fixes for Windows build: sizeof(GPR::register) didn't work, switched to sizeof(((GPR*)NULL)->register).
llvm-svn: 203667
This change uses a fixed known offset for the Linux i386 DR0 register.
This change also undoes the 32-bit wordsize change from r169645 that
revolved around being 32-bit/64-bit friendly in
WriteRegOperation::Execute within the Linux ProcessMonitor.cpp. I ran
all the tests on x86_64 Linux with no failures. I also ran some simple
tests with 32-bit Linux exe on x86_64 host and 32-bit linux exe on
i686 32-bit host and these worked fine.
Note (from Todd): the UserData struct in the Linux i386 register
context (only used by Linux i386 host running Linux 32-bit inferior)
is out of sync with what shows up in the sys/user.h for an 32-bit
Linux build (per an earlier change of mine to make it look more like
x86_64 host running x86 exe). I think we should (1) make i386 Linux
targets run using the same register context (and correct ones) on i386
and x86_64 linux hosts if that is possible, and (2) we could use some
tests around the register handling, particularly to verify things like
DR0 registers are in the right spots on host/target combos that we can
verify vs. known correct values.
Change by Matthew Gardiner.
llvm-svn: 202887
This change fixes up issues with specifying the size of the i386
register infos for FPU registers. The bug was that for the i386
register context, the size of the FPU registers were still being
computed based on the x86_64 FXSAVE structure.
This change permits the FPR_SIZE macro to optionally be defined
outside of RegisterInfos_i386.h, which RegisterContextLinux_i386.cpp
does properly. It redefines the FPR_i386 structure with all the
accessible parts that RegisterInfos_i386.h wants to see, which we had
not done before when we made the overall size of the structure
properly sized a recently.
This change also modifies POSIXThread to create a
RegisterContextLinux_i386 only when the host is 32-bit; otherwise, it
uses the RegisterContextLinux_x86_64, which works properly for 32-bit
and 64-bit inferiors on a 64-bit host.
I tested this debugging a Linux x86 exe on an x86 host (Ubuntu 13.10
x86), and debugging a Linux x86 exe and a Linux x86-64 exe on an
x86-64 host (Ubuntu 12.04 LTS). Those cases all worked.
Thanks to Matthew Gardiner who discoverd may key insights into
tracking down the issue. The motivation for this change and some of
the code originates from him via this thread:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140224/010554.html
llvm-svn: 202428
Implement x86_64 debug register read/write in support of hardware
watchpoints. Hoist LinuxThread::TraceNotify code back into
POSIXThread::TraceNotify()
Patch by John Wolfe.
We still need to rework this later to avoid the #ifdef FreeBSD.
llvm-reviews.chandlerc.com/D2572
llvm.org/pr16706
llvm-svn: 201706
This patch addresses a bug where in a multi-threaded program a new
signal from the inferior may be received before all group-stop
messages from an earlier signal have been handled.
Patch by Andrew MacPherson
llvm-svn: 200226
::Fork already does this internally, so this was simply leaking file handles.
This fixes the problem where the test suite would occasionally run out of file handles.
llvm-svn: 192929
To make this work this patch extends LLDB to:
- Explicitly track the link_map address for each module. This is effectively the module handle, not sure why it wasn't already being stored off anywhere. As an extension later, it would be nice if someone were to add support for printing this as part of the modules list.
- Allow reading the per-thread data pointer via ptrace. I have added support for Linux here. I'll be happy to add support for FreeBSD once this is reviewed. OS X does not appear to have __thread variables, so maybe we don't need it there. Windows support should eventually be workable along the same lines.
- Make DWARF expressions track which module they originated from.
- Add support for the DW_OP_GNU_push_tls_address DWARF opcode, as generated by gcc and recent versions of clang. Earlier versions of clang (such as 3.2, which is default on Ubuntu right now) do not generate TLS debug info correctly so can not be supported here.
- Understand the format of the pthread DTV block. This is where it gets tricky. We have three basic options here:
1) Call "dlinfo" or "__tls_get_addr" on the inferior and ask it directly. However this won't work on core dumps, and generally speaking it's not a good idea for the debugger to call functions itself, as it has the potential to not work depending on the state of the target.
2) Use libthread_db. This is what GDB does. However this option requires having a version of libthread_db on the host cross-compiled for each potential target. This places a large burden on the user, and would make it very hard to cross-debug from Windows to Linux, for example. Trying to build a library intended exclusively for one OS on a different one is not pleasant. GDB sidesteps the problem and asks the user to figure it out.
3) Parse the DTV structure ourselves. On initial inspection this seems to be a bad option, as the DTV structure (the format used by the runtime to manage TLS data) is not in fact a kernel data structure, it is implemented entirely in useerland in libc. Therefore the layout of it's fields are version and OS dependent, and are not standardized.
However, it turns out not to be such a problem. All OSes use basically the same algorithm (a per-module lookup table) as detailed in Ulrich Drepper's TLS ELF ABI document, so we can easily write code to decode it ourselves. The only question therefore is the exact field layouts required. Happily, the implementors of libpthread expose the structure of the DTV via metadata exported as symbols from the .so itself, designed exactly for this kind of thing. So this patch simply reads that metadata in, and re-implements libthread_db's algorithm itself. We thereby get cross-platform TLS lookup without either requiring third-party libraries, while still being independent of the version of libpthread being used.
Test case included.
llvm-svn: 192922
Use 32-bit register enums without gaps on 64-bit hosts.
Don't show 64-bit registers when debugging 32-bit targets.
Add psuedo gpr registers (ax, ah, al, etc.)
Add mmx registers.
Fix TestRegisters.py to not read ymm15 register on 32-bit targets.
Fill out and move gcc/dwarf/gdb register enums to RegisterContext_x86.h
llvm-svn: 192263
scan-build was complaining about:
The return value from the call to 'setgid' is not checked. If an error occurs in 'setgid', the following code may execute with unexpected privileges
llvm-svn: 191618
- ProcessMonitor::[Do|Serve]Operation no longer depend on file descriptors!
- removed unused member functions CloseFD and EnableIPC
- add semaphores to signal when an Operation is ready to be processed/complete.
This commit fixes a bug that was identified under stress-testing (i.e. build
LLVM while running tests) that led to LLDB becoming unresponsive because the
read/write operations on file descriptors in ProcessMonitor were not checked.
Other test runner improvement/convenience:
- pickup environment variables LLDB_LINUX_LOG and LLDB_LINUX_LOG_OPTIONS to
enable (Linux) logging when running the test suite. Example usage:
$ LLDB_LINUX_LOG="mylog.txt" LLDB_LINUX_LOG_OPTIONS="process thread" python dotest.py
llvm-svn: 190820
On Linux there is no separate notion of a process (vs. a thread) for
ptrace(); each thread needs to be individually detached. On FreeBSD
we have a separate process context, and we detach just it.
Review: http://llvm-reviews.chandlerc.com/D1418
llvm-svn: 189666
Created new LinuxThread class inherited from POSIXThread and removed linux / freebsd ifdefs
Removed several un-needed set thread name calls
CR (and multiple suggestions): mkopec
llvm-svn: 187545
Usage: 'lldb a.out -c core'.
TODO: FreeBSD support.
TODO: Support for AVX registers.
TODO: Refactor so that RegisterContextCore* don't inherit from classes that use ProcessMonitor
to fix the build on OS/X.
llvm-svn: 186516
RegisterContextCoreLinux_x86_64 inherits from RegisterContextLinux_x86_64 which inherits from RegisterContext_x86_64 which uses has:
ProcessMonitor &GetMonitor();
This register context used by the core file can't use this since the process plug-in will be ProcessElfCore and the implementation of GetMonitor() does:
ProcessMonitor &
RegisterContext_x86_64::GetMonitor()
{
ProcessSP base = CalculateProcess();
ProcessPOSIX *process = static_cast<ProcessPOSIX*>(base.get());
return process->GetMonitor();
}
ProcessELFCore doesn't, nor should it inherit from ProcessPOSIX and any call to GetMonitor() will fail for ELF core files.
Suggested cleanups:
- Make a register context class that is a base class that doesn't have any reading smarts, then make one that uses ProcessPOSIX and the has the GetMonitor() call, and one that gets its data straight from the core file.
llvm-svn: 186223
-Remove tracing of fork/vfork until we add support for tracing inferiors' children on Linux.
-Add trace exec option for ptrace so that we don't receive legacy SIGTRAP signals on execve calls.
-Add handling of SIGCHLD sent by kernel (for now, deliver the signal to the inferior).
llvm-svn: 182153
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
- Eliminated the use of static for methods that read m_register_infos, so that these routines can be implemented in the base class.
- Eliminated m_register_infos in the base class because this is not used when derived classes call UpdateRegisterInfo.
- Also moved the namespace using declarations from headers to source files.
Thanks to Daniel and Samuel for their review feedback.
llvm-svn: 181538
- Required for platform-independant handling of general purpose registers (i.e. for core dumps).
Thanks to Samuel Jacob for this patch.
llvm-svn: 180878
- Adds unique enums for ymm registers to the ABI and the POSIX register context.
- Reworks the register context data structures to support a union of FXSAVE and XSAVE
--- Allows the same code base to deal with the FPU independent of the availability of AVX.
- Determine if AVX is supported by attempting to read XSAVE using ptrace.
--- Support an extended register set for avx registers if available.
- Provide a mechanism to assemble/parse register halves into a single ymm buffer for use with RegisterValue.
--- Reworked Read/WriteRegister routines to read/write/parse ymm registers.
Adds tests for ymm register write with read-back, and expressions involving ymm registers.
- Tests vary depending on the availability of an avx register set.
Thanks to Daniel and Matt for their reviews.
llvm-svn: 180572
- All Linux logging channels now use a single global instance of lldb_private::Log, to handle the case of logging during process tear down.
- Also removed a single use of LogSP in FreeBSD and fixed a typo in a comment while reading through ProcessKDPLog.
Reviewed by Daniel Malea.
llvm-svn: 178242
Oleksiy Vyalov