Debug entry values functionality provides debug information about
call sites and function parameters values at the call entry spot.
Condition for generating this type of information is
compiling with -g option and optimization level higher
than zero(-O0).
In ISEL phase, while lowering call instructions, collect info
about registers that forward arguments into following
function frame. We store such info into MachineFunction of
the caller function. This is used very late, when dumping DWARF
info about call site parameters.
The call site info is visible at MIR level, as callSites attribute
of MachineFunction. Also, when using unmodified parameter value
inside callee it could be described as DW_OP_entry_value expression.
To deal with callSites attribute, we should pass
-emit-call-site-info option to llc.
This patch enables functionality in clang frontend and adds
call site info generation support for MIPS targets
(mips, mipsel, mips64, mips64el).
Patch by Nikola Tesic
Differential Revision: https://reviews.llvm.org/D78105
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
MCELFObjectWriter::setRType## methods are always used altogether to
build complete MIPS N64 ABI "chain" of relocations. Using single
function for this task makes code less verbose.
Summary:
Before this patch, `relaxInstruction` takes three arguments, the first
argument refers to the instruction before relaxation and the third
argument is the output instruction after relaxation. There are two quite
strange things:
1) The first argument's type is `const MCInst &`, the third
argument's type is `MCInst &`, but they may be aliased to the same
variable
2) The backends of ARM, AMDGPU, RISC-V, Hexagon assume that the third
argument is a fresh uninitialized `MCInst` even if `relaxInstruction`
may be called like `relaxInstruction(Relaxed, STI, Relaxed)` in a
loop.
In this patch, we drop the thrid argument, and let `relaxInstruction`
directly modify the given instruction. Also, this patch fixes the bug https://bugs.llvm.org/show_bug.cgi?id=45580, which is introduced by D77851, and
breaks the assumption of ARM, AMDGPU, RISC-V, Hexagon.
Reviewers: Razer6, MaskRay, jyknight, asb, luismarques, enderby, rtaylor, colinl, bcain
Reviewed By: Razer6, MaskRay, bcain
Subscribers: bcain, nickdesaulniers, nathanchance, wuzish, annita.zhang, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, tpr, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78364
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
Octeon branches (bbit0/bbit032/bbit1/bbit132) have an immediate operand,
so it is legal to have such replacement within
MipsBranchExpansion::replaceBranch().
According to the specification, a branch (e.g. bbit0 ) looks like:
bbit0 rs p offset // p is an immediate operand
if !rs<p> then branch
Without this patch, an assertion triggers in the method,
and the problem has been found in the real example.
Differential Revision: https://reviews.llvm.org/D76842
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Follow-up of D72172 and D72180
This patch passes `uint64_t Address` to print methods of PC-relative
operands so that subsequent target specific patches can change
`*InstPrinter::print{Operand,PCRelImm,...}` to customize the output.
Add MCInstPrinter::PrintBranchImmAsAddress which is set to true by
llvm-objdump.
```
// Current llvm-objdump -d output
aarch64: 20000: bl #0
ppc: 20000: bl .+4
x86: 20000: callq 0
// Ideal output
aarch64: 20000: bl 0x20000
ppc: 20000: bl 0x20004
x86: 20000: callq 0x20005
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
aarch64: 20000: bl 20000
ppc: 20000: bl 0x20004
x86: 20000: callq 20005
```
In `lib/Target/X86/X86GenAsmWriter1.inc` (generated by `llvm-tblgen -gen-asm-writer`):
```
case 12:
// CALL64pcrel32, CALLpcrel16, CALLpcrel32, EH_SjLj_Setup, JCXZ, JECXZ, J...
- printPCRelImm(MI, 0, O);
+ printPCRelImm(MI, Address, 0, O);
return;
```
Some targets have 2 `printOperand` overloads, one without `Address` and
one with `Address`. They should annotate derived `Operand` properly with
`let OperandType = "OPERAND_PCREL"`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76574
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
This directive inserts code to add $gp to the argument's register when
support for position independent code is enabled.
For example, this code:
.cpadd $4
expands to:
addu $4, $4, $gp
-fuse-init-array is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
X86SpeculativeLoadHardeningPass::tracePredStateThroughCall can call
MCContext::createTempSymbol before TargetLoweringObjectFileELF::Initialize().
We need to call TargetLoweringObjectFileELF::Initialize() ealier.
test/CodeGen/X86/speculative-load-hardening-indirect.ll
Differential Revision: https://reviews.llvm.org/D71360
UseInitArray is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
Differential Revision: https://reviews.llvm.org/D71360
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76348
For context, the proposed RISC-V bit manipulation extension has a subset
of instructions which require one of two SubtargetFeatures to be
enabled, 'zbb' or 'zbp', and there is no defined feature which both of
these can imply to use as a constraint either (see comments in D65649).
AssemblerPredicates allow multiple SubtargetFeatures to be declared in
the "AssemblerCondString" field, separated by commas, and this means
that the two features must both be enabled. There is no equivalent to
say that _either_ feature X or feature Y must be enabled, short of
creating a dummy SubtargetFeature for this purpose and having features X
and Y imply the new feature.
To solve the case where X or Y is needed without adding a new feature,
and to better match a typical TableGen style, this replaces the existing
"AssemblerCondString" with a dag "AssemblerCondDag" which represents the
same information. Two operators are defined for use with
AssemblerCondDag, "all_of", which matches the current behaviour, and
"any_of", which adds the new proposed ORing features functionality.
This was originally proposed in the RFC at
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139138.html
Changes to all current backends are mechanical to support the replaced
functionality, and are NFCI.
At this stage, it is illegal to combine features with ands and ors in a
single AssemblerCondDag. I suspect this case is sufficiently rare that
adding more complex changes to support it are unnecessary.
Differential Revision: https://reviews.llvm.org/D74338
Custom legalize non-power-of-2 and unaligned load and store for MIPS32r5
and older, custom legalize non-power-of-2 load and store for MIPS32r6.
Don't attempt to combine non power of 2 loads or unaligned loads when
subtarget doesn't support them (MIPS32r5 and older).
Differential Revision: https://reviews.llvm.org/D74625
Improve legality checks for load and store, 4 byte scalar
load and store are now legal for all subtargets.
During regbank selection 4 byte unaligned loads and stores
for MIPS32r5 and older get mapped to gprb.
Select 4 byte unaligned loads and stores for MIPS32r5.
Fix tests that unintentionally had unaligned load or store.
Differential Revision: https://reviews.llvm.org/D74624
Consider large operands in G_MERGE_VALUES and G_UNMERGE_VALUES as
Ambiguous during regbank selection.
Introducing new InstType AmbiguousWithMergeOrUnmerge which will
allow us to recognize whether to narrow scalar or use s64:fprb.
This change exposed a bug when reusing data from TypeInfoForMF.
Thus when Instr is about to get destroyed (using narrow scalar)
clear its data in TypeInfoForMF. Internal data is saved based on
Instr's address, and it will no longer be valid.
Add detailed asserts for InstType and operand size.
Generate generic instructions instead of MIPS target instructions
during argument lowering and custom legalizer.
Select G_UNMERGE_VALUES and G_MERGE_VALUES when proper banks are
selected: {s32:gprb, s32:gprb, s64:fprb} for G_UNMERGE_VALUES and
{s64:fprb, s32:gprb, s32:gprb} for G_MERGE_VALUES.
Update tests. One improvement is when floating point argument in
gpr(or two gprs) gets passed to another function through gpr
unnecessary fpr-to-gpr moves are no longer generated.
Differential Revision: https://reviews.llvm.org/D74623
Like COPY instructions explained in D70616, we don't check the constraints
when combining G_UNMERGE_VALUES. Use the same logic used in D70616 to check
if registers can be replaced, or a COPY instruction needs to be built.
https://reviews.llvm.org/D70564
Summary:
Add a new method (tryParseRegister) that attempts to parse a register specification.
MASM allows the use of IFDEF <register>, as well as IFDEF <symbol>. To accommodate this, we make it possible to check whether a register specification can be parsed at the current location, without failing the entire parse if it can't.
Reviewers: thakis
Reviewed By: thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73486
New intrinisics are implemented for when we need to port SIMD code from other
arhitectures and only load or store portions of MSA registers.
Following intriniscs are added which only load/store element 0 of a vector:
v4i32 __builtin_msa_ldrq_w (const void *, imm_n2048_2044);
v2i64 __builtin_msa_ldr_d (const void *, imm_n4096_4088);
void __builtin_msa_strq_w (v4i32, void *, imm_n2048_2044);
void __builtin_msa_str_d (v2i64, void *, imm_n4096_4088);
Differential Revision: https://reviews.llvm.org/D73644
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
This is passed to legalizeCustom, but not intrinsic. Also remove the
MRI argument, since you can get that from the MachineIRBuilder.
I'm not sure why MachineIRBuilder has a private observer member, and
this is passed separately.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
G_CTPOP is generated from llvm.ctpop.<type> intrinsics, clang generates
these intrinsics from __builtin_popcount and __builtin_popcountll.
Add lower and narrow scalar for G_CTPOP.
Lower G_CTPOP for MIPS32.
Differential Revision: https://reviews.llvm.org/D73216
llvm.cttz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
G_CTTZ is generated from llvm.cttz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_ctz and
__builtin_ctzll.
G_CTTZ_ZERO_UNDEF comes from llvm.cttz.<type> (<type> <src>, i1 true).
Clang generates such intrinsics as parts of expansion of builtin_ffs
and builtin_ffsll. It is also traditionally part of and many
algorithms that are now predicated on avoiding zero-value inputs.
Add narrow scalar (algorithm uses G_CTTZ_ZERO_UNDEF) for G_CTTZ.
Lower G_CTTZ and G_CTTZ_ZERO_UNDEF for MIPS32.
Differential Revision: https://reviews.llvm.org/D73215
llvm.ctlz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
MIPS clz instruction returns 32 for zero input.
G_CTLZ is generated from llvm.ctlz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_clz and
__builtin_clzll.
G_CTLZ_ZERO_UNDEF can also be generated from llvm.ctlz with true as
second argument. It is also traditionally part of and many algorithms
that are now predicated on avoiding zero-value inputs.
Add narrow scalar for G_CTLZ (algorithm uses G_CTLZ_ZERO_UNDEF).
Lower G_CTLZ_ZERO_UNDEF and select G_CTLZ for MIPS32.
Differential Revision: https://reviews.llvm.org/D73214
Updated FoldConstantArithmetic method signature to match that of
FoldConstantVectorArithmetic in preparation for merging the two
functions together
https://bugs.llvm.org/show_bug.cgi?id=36544
This is the first step in combining the various
FoldConstantVectorArithmetic and FoldConstantVectorArithmetic
functions into one FoldConstantArithmetic function.
Differential Revision: https://reviews.llvm.org/D72870
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Except AMDGPU/R600RegisterInfo (a bunch of MIR tests seem to have
problems), every target overrides it with true. PostMachineScheduler
requires livein information. Not providing it can cause assertion
failures in ScheduleDAGInstrs::addSchedBarrierDeps().
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
The R_(MICRO)MIPS_JALR optimization only works when used against functions.
Using the relocation against a data symbol (e.g. function pointer) will
cause some linkers that don't ignore the hint in this case (e.g. LLD prior
to commit 5bab291b7b) to generate a relative branch to the data symbol
which crashes at run time. Before this patch, LLVM was erroneously emitting
these relocations against local-dynamic TLS function pointers and global
function pointers with internal visibility.
Reviewers: atanasyan, jrtc27, vstefanovic
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72571
The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It is used by no
target but X86 in -DLLVM_ENABLE_ASSERTIONS=On builds.
If we ever have the needs to add verbose log to disassemblers, we can
record log with a member function, instead of passing it around as an
argument.
Summary:
This always just used the same libcall as unordered, but the comparison predicate was different. This change appears to have been made when targets were given the ability to override the predicates. Before that they were hardcoded into the type legalizer. At that time we never inverted predicates and we handled ugt/ult/uge/ule compares by emitting an unordered check ORed with a ogt/olt/oge/ole checks. So only ordered needed an inverted predicate. Later ugt/ult/uge/ule were optimized to only call a single libcall and invert the compare.
This patch removes the ordered entries and just uses the inverting logic that is now present. This removes some odd things in both the Mips and WebAssembly code.
Reviewers: efriedma, ABataev, uweigand, cameron.mcinally, kpn
Reviewed By: efriedma
Subscribers: dschuff, sdardis, sbc100, arichardson, jgravelle-google, kristof.beyls, hiraditya, aheejin, sunfish, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72536
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
Summary:
In commit b91f239485 I updated the
MipsDelaySlotFiller to skip BUNDLE instructions.
However, in addition to not considering BUNDLE instructions for the delay
slot, we also need to ensure that the register def-use information is
updated. Not updating this information caused run-time crashes (when using
the out-of-tree CHERI backend) since later definitions could be overwritten
with earlier register values.
Reviewers: atanasyan
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72254
printInst prints a branch/call instruction as `b offset` (there are many
variants on various targets) instead of `b address`.
It is a convention to use address instead of offset in most external
symbolizers/disassemblers. This difference makes `llvm-objdump -d`
output unsatisfactory.
Add `uint64_t Address` to printInst(), so that it can pass the argument to
printInstruction(). `raw_ostream &OS` is moved to the last to be
consistent with other print* methods.
The next step is to pass `Address` to printInstruction() (generated by
tablegen from the instruction set description). We can gradually migrate
targets to print addresses instead of offsets.
In any case, downstream projects which don't know `Address` can pass 0 as
the argument.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D72172
AMDGPU can't unambiguously go back from the selected instruction
register class to the register bank without knowing if this was used
in a boolean context.
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Recommit notes:
Introduce temporary variables in order to make sure
instructions get inserted into MachineFunction in same order
regardless of compiler used to build llvm.
Differential Revision: https://reviews.llvm.org/D71363
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Differential Revision: https://reviews.llvm.org/D71363
G_BSWAP is generated from llvm.bswap.<type> intrinsics, clang genrates
these intrinsics from __builtin_bswap32 and __builtin_bswap64.
Add lower and narrowscalar for G_BSWAP.
Lower G_BSWAP on MIPS32, select G_BSWAP on MIPS32 revision 2 and later.
Differential Revision: https://reviews.llvm.org/D71362
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
Currently -fuse-init-array option is not effective when target triple
does not specify os, on x86,x86_64.
i.e.
// -fuse-init-array is not honored.
$ clang -target i386 -fuse-init-array test.c -S
// -fuse-init-array is honored.
$ clang -target i386-linux -fuse-init-array test.c -S
This patch fixes first case.
And does cleanup.
Reviewers: rnk, craig.topper, fhahn, echristo
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D71360
Legalization algorithm is complicated by two facts:
1) While regular instructions should be possible to legalize in
an isolated, per-instruction, context-free manner, legalization
artifacts can only be eliminated in pairs, which could be deeply, and
ultimately arbitrary nested: { [ () ] }, where which paranthesis kind
depicts an artifact kind, like extend, unmerge, etc. Such structure
can only be fully eliminated by simple local combines if they are
attempted in a particular order (inside out), or alternatively by
repeated scans each eliminating only one innermost pair, resulting in
O(n^2) complexity.
2) Some artifacts might in fact be regular instructions that could (and
sometimes should) be legalized by the target-specific rules. Which
means failure to eliminate all artifacts on the first iteration is
not a failure, they need to be tried as instructions, which may
produce more artifacts, including the ones that are in fact regular
instructions, resulting in a non-constant number of iterations
required to finish the process.
I trust the recently introduced termination condition (no new artifacts
were created during as-a-regular-instruction-retrial of artifacts not
eliminated on the previous iteration) to be efficient in providing
termination, but only performing the legalization in full if and only if
at each step such chains of artifacts are successfully eliminated in
full as well.
Which is currently not guaranteed, as the artifact combines are applied
only once and in an arbitrary order that has to do with the order of
creation or insertion of artifacts into their worklist, which is a no
particular order.
In this patch I make a small change to the artifact combiner, making it
to re-insert into the worklist immediate (modulo a look-through copies)
artifact users of each vreg that changes its definition due to an
artifact combine.
Here the first scan through the artifacts worklist, while not
being done in any guaranteed order, only needs to find the innermost
pair(s) of artifacts that could be immediately combined out. After that
the process follows def-use chains, making them shorter at each step, thus
combining everything that can be combined in O(n) time.
Reviewers: volkan, aditya_nandakumar, qcolombet, paquette, aemerson, dsanders
Reviewed By: aditya_nandakumar, paquette
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71448
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
In order to properly implement these atomic we need one register more than other
binary atomics. It is used for storing result from comparing values in addition
to the one that is used for actual result of operation.
https://reviews.llvm.org/D71028
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
This patch adds forward iterators mc_difflist_iterator,
mc_subreg_iterator and mc_superreg_iterator, based on the existing
DiffListIterator. Those are used to provide iterator ranges over
sub- and super-register from TRI, which are slightly more convenient
than the existing MCSubRegIterator/MCSuperRegIterator. Unfortunately,
it duplicates a bit of functionality, but the new iterators are a bit
more convenient (and can be used with various existing iterator
utilities) and should probably replace the old iterators in the future.
This patch updates some existing users.
Reviewers: evandro, qcolombet, paquette, MatzeB, arsenm
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D70565
Summary:
We rely on this in our CHERI backend to address the GOT by generating a
$pc-relative addresses. For this we emit the following code sequence:
lui $1, %pcrel_hi(_CHERI_CAPABILITY_TABLE_-8)
daddiu $1, $1, %pcrel_lo(_CHERI_CAPABILITY_TABLE_-4)
cgetpccincoffset $c1, $1
However, without this change the addend is implicitly converted to
UINT32_MAX and an invalid pointer value is generated.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70953
Summary:
In our CHERI fork we use BUNDLE instructions to ensure that a
three-instruction sequence to generate a program-counter-relative value is
emitted without reordering or insertions (since that would break the 32-bit
offset computation).
Currently MipsAsmPrinter asserts when it encounters a pseudo instruction.
To handle BUNDLE we can simply skip the instruction which will then make
EmitInstruction() process the contents of the bundle in order.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70945
Summary:
In our CHERI fork we use BUNDLE instructions to ensure that a
three-instruction sequence to generate a program-counter-relative value is
emitted without reordering or insertions (since that would break the 32-bit
offset computation). This sequence is created in MipsExpandPseudo and we use
finalizeBundle() to create the BUNDLE instruction.
However, the delay slot filler currently breaks this pattern since the BUNDLE
will be removed and so all instructions are moved into the delay slot.
Since the delay slot only executes the first instruction, this results in
incorrect computations (and run-time crashes) if the branch is taken.
The original test cases uses CHERI instructions, so for the test case here
I simple filled a BUNDLE with a no-op DADDiu $sp_64, -16 and DADDiu $sp_64, 16.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70944
Summary:
I was tracking down a code-generation bug in this pass and found that the
added output was useful. It is also helpful to find out why a delay slot
could not be filled even though there is clearly a valid instruction (which
appears to mostly be caused by CFI instructions).
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70940
There are a couple of bugs with the sc, scs, ll, lld instructions expanding:
1. On R6 these instruction pack immediate offset into a 9-bit field. Now
if an immediate exceeds 9-bits assembler does not perform expansion and
just rejects such instruction.
2. On 64-bit non-PIC code if an operand is a symbol assembler generates
incorrect sequence of instructions. It uses R_MIPS_HI16 and R_MIPS_LO16
relocations and skips R_MIPS_HIGHEST and R_MIPS_HIGHER ones.
To solve these problems this patch:
- Introduces `mem_simm9_exp` to mark 9-bit memory immediate operands
which require expansion. Probably later all `mem_simm9` operands will be
able to migrate on `mem_simm9_exp` and we rename it to `mem_simm9`.
- Adds new `OPERAND_MEM_SIMM9` operand type and assigns it to the
`mem_simm9_exp`. That allows to know operand size in the `processInstruction`
method and decide whether we need to expand instruction.
- Adds `expandMem9Inst` method to expand instructions with 9-bit memory
immediate operand. This method just load immediate into a "base"
register used by origibal instruction:
sc $2, 256($sp) => addiu $1, $sp, 256
sc $2, 0($1)
- Fix `expandMem16Inst` to support a correct set of relocations for
symbol loading in case of 64-bit non-PIC code.
ll $12, symbol => lui $12, 0
R_MIPS_HIGHEST symbol
daddiu $12, $12, 0
R_MIPS_HIGHER symbol
dsll $12, $12, 16
daddiu $12, $12, 0
R_MIPS_HI16 symbol
dsll $12, $12, 16
ll $12, 0($12)
R_MIPS_LO16 symbol
- Fix `expandMem16Inst` to unify handling of 3 and 4 operands
instructions.
- Delete unused now `MipsTargetStreamer::emitSCWithSymOffset` method.
Task for next patches - implement expanding for other instructions use
`mem_simm9` operand and other `mem_simm##` operands.
Differential Revision: https://reviews.llvm.org/D70648
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
Having a generic CPU removes a warning when creating a subtarget without
the CPU being explicitly specified.
Differential Revision: https://reviews.llvm.org/D70490
`expandMemInst` expects instruction with 3 or 4 operands and the last
operand requires expanding. It's redundant to scan all operands in a
loop. We can check the last operands.
* Implements scalable size queries for MVTs, split out from D53137.
* Contains a fix for FindMemType to avoid using scalable vector type
to contain non-scalable types.
* Explicit casts for several places where implicit integer sign
changes or promotion from 32 to 64 bits caused problems.
* CodeGenDAGPatterns will treat scalable and non-scalable vector types
as different.
Reviewers: greened, cameron.mcinally, sdesmalen, rovka
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D66871
This patch makes LLVM compatible with GAS. It accepts `la` pseudo
instruction on arch with 64-bit pointers and just shows a warning.
Differential Revision: https://reviews.llvm.org/D70202
O32 ABI uses relocations in REL format. Relocation's addend is written
in place. R_MIPS_JALR relocation points to the `jalr` instruction which
does not have a place to store the relocation addend. So it's impossible
to save non-zero "offset". This patch blocks emission of `R_MIPS_JALR`
relocations in such cases.
Differential Revision: https://reviews.llvm.org/D70201
Introduce IntImmLeaf version of PatLeaf immZExt16 for 32-bit immediates.
Change immZExt16 with imm32ZExt16 for andi, ori and xori.
This keeps same behavior for SDAG and allows for GlobalISel selectImpl
to select 'G_CONSTANT imm' + G_AND, G_OR, G_XOR into ANDi, ORi, XORi,
respectively, when 32-bit imm satisfies imm32ZExt16 predicate: zero
extending 16 low bits of imm is equal to imm.
Large number of test changes comes from zero extending of small types
which is transformed into 'and' with bitmask in legalizer.
Differential Revision:https://reviews.llvm.org/D70185
Introduce IntImmLeaf version of PatLeaf immSExt16 for 32-bit immediates.
Change immSExt16 with imm32SExt16 for addiu.
This keeps same behavior for SDAG and allows for GlobalISel selectImpl
to select 'G_CONSTANT imm' + G_ADD into ADDIu when 32-bit imm satisfies
imm32SExt16 predicate: sign extending 16 low bits of imm is equal to imm.
Differential Revision: https://reviews.llvm.org/D70184
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Instruction ldi.fmt can be considered cheap enough to avoid spill and restore
of value that it produces since it's loaded from immediate.
Differential Revision: https://reviews.llvm.org/D69898
When a 64-bit triple is used emit an error if the CPU only supports
32-bit code.
Patch by Miloš Stojanović.
Differential Revision: https://reviews.llvm.org/D70018
Refactor usage of isCopyInstrImpl, isCopyInstr and isAddImmediate methods
to return optional machine operand pair of destination and source
registers.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D69622
`saa` and `saad` are 32-bit and 64-bit store atomic add instructions.
memory[base] = memory[base] + rt
These instructions are available for "Octeon+" CPU. The patch adds support
for both instructions to MIPS assembler and diassembler and introduces new
CPU type - "octeon+".
Next patches will implement `.set arch=octeon+` directive and `AFL_EXT_OCTEONP`
ISA extension flag support.
Differential Revision: https://reviews.llvm.org/D69849
Summary:
G_GEP is rather poorly named. It's a simple pointer+scalar addition and
doesn't support any of the complexities of getelementptr. I therefore
propose that we rename it. There's a G_PTR_MASK so let's follow that
convention and go with G_PTR_ADD
Reviewers: volkan, aditya_nandakumar, bogner, rovka, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, arphaman, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69734
Introduce helper methods and refactor pieces of code related to
register banks in MipsInstructionSelector.
Add a few detailed asserts in order to get a better overview
of LLT, register bank combinations that are supported at the moment
and reduce need to look at other files.
Differential Revision: https://reviews.llvm.org/D69663
Refactor usage of isCopyInstrImpl, isCopyInstr and isAddImmediate methods
to return optional machine operand pair of destination and source
registers.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D69622
Craig Topper