For context, the proposed RISC-V bit manipulation extension has a subset
of instructions which require one of two SubtargetFeatures to be
enabled, 'zbb' or 'zbp', and there is no defined feature which both of
these can imply to use as a constraint either (see comments in D65649).
AssemblerPredicates allow multiple SubtargetFeatures to be declared in
the "AssemblerCondString" field, separated by commas, and this means
that the two features must both be enabled. There is no equivalent to
say that _either_ feature X or feature Y must be enabled, short of
creating a dummy SubtargetFeature for this purpose and having features X
and Y imply the new feature.
To solve the case where X or Y is needed without adding a new feature,
and to better match a typical TableGen style, this replaces the existing
"AssemblerCondString" with a dag "AssemblerCondDag" which represents the
same information. Two operators are defined for use with
AssemblerCondDag, "all_of", which matches the current behaviour, and
"any_of", which adds the new proposed ORing features functionality.
This was originally proposed in the RFC at
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139138.html
Changes to all current backends are mechanical to support the replaced
functionality, and are NFCI.
At this stage, it is illegal to combine features with ands and ors in a
single AssemblerCondDag. I suspect this case is sufficiently rare that
adding more complex changes to support it are unnecessary.
Differential Revision: https://reviews.llvm.org/D74338
Consider large operands in G_MERGE_VALUES and G_UNMERGE_VALUES as
Ambiguous during regbank selection.
Introducing new InstType AmbiguousWithMergeOrUnmerge which will
allow us to recognize whether to narrow scalar or use s64:fprb.
This change exposed a bug when reusing data from TypeInfoForMF.
Thus when Instr is about to get destroyed (using narrow scalar)
clear its data in TypeInfoForMF. Internal data is saved based on
Instr's address, and it will no longer be valid.
Add detailed asserts for InstType and operand size.
Generate generic instructions instead of MIPS target instructions
during argument lowering and custom legalizer.
Select G_UNMERGE_VALUES and G_MERGE_VALUES when proper banks are
selected: {s32:gprb, s32:gprb, s64:fprb} for G_UNMERGE_VALUES and
{s64:fprb, s32:gprb, s32:gprb} for G_MERGE_VALUES.
Update tests. One improvement is when floating point argument in
gpr(or two gprs) gets passed to another function through gpr
unnecessary fpr-to-gpr moves are no longer generated.
Differential Revision: https://reviews.llvm.org/D74623
Add support for s.d instruction for Mips1 which expands into two swc1
instructions.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D63199
llvm-svn: 363184
Before this change LLVM emits non-microMIPS variant of the `mov.d`
command for microMIPS code.
Differential Revision: http://reviews.llvm.org/D59045
llvm-svn: 356052
Instruction abs.[ds] is not generating correct result when working
with NaNs for revisions prior mips32r6 and mips64r6.
To generate a sequence which always produce a correct result, but also
to allow user more control on how his code is compiled, attribute
+abs2008 is added, so user can choose legacy or 2008.
By default legacy mode is used on revisions prior R6. Mips32r6 and
mips64r6 use abs2008 mode by default.
Differential Revision: https://reviews.llvm.org/D35983
llvm-svn: 352370
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The `mtc1` and `mfc1` definitions in the MipsInstrFPU.td have MMRel,
but do not have StdMMR6Rel tags. When these instructions are emitted
for microMIPS R6 targets, `Mips::MipsR62MicroMipsR6` nor
`Mips::Std2MicroMipsR6` cannot find correct op-codes and as a result the
backend uses mips32 variant of the instructions encoding.
The patch fixes this problem by adding the StdMMR6Rel tag and check
instructions encoding in the test case.
Differential revision: https://reviews.llvm.org/D51482
llvm-svn: 341221
This is a follow-up to the rL337171. This patch fixes regression
introduced by the r337171 and enables MipsTruncIntFP pattern.
Differential revision: https://reviews.llvm.org/D49469
llvm-svn: 337392
Instead, the pattern is tagged with the correct predicate when
it is declared. Some patterns have been duplicated as necessary.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D48365
llvm-svn: 337171
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
An upcoming patch D41434, changes the ordering of the matcher table
for assembly. This patch corrects the definition of the normal MIPS
cvt.d.w not to be available in microMIPS.
llvm-svn: 325589
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
These instructions were previously marked as codegen only preventing
them from being assembled as microMIPS or disassembled.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D39123
llvm-svn: 316656
Previously these instructions were marked codegen only and had
an under-specified instruction description that did not record the
fcc register.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D38847
llvm-svn: 315905
Add instruction definitions for FP32 mode for recip.d and rsqrt.d.
Previously these instructions were only defined when targeting the
full 64-bit FPU model but were not guarded properly.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38400
llvm-svn: 315318
Previously, instructions that were defined to use the FGR64 register class
were associated with the Mips64 table which was incorrect.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38454
llvm-svn: 314976
This patch disables codegen support for branch likely instructions to
address a potential bug. These branches were unselectable as
they had the same patterns as the normal branches but came after them
when ISel was concerned.
The branch likely instructions were marked as having no delay
slots when they have annulling delay slots. The delay slot filler
does not currently handle annulling delay slot branches, so this
would lead to wrong codegen if these branches were generated.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D38169
llvm-svn: 314421
This patch enables generation of NMADD and NMSUB instructions when fneg node
is present. These instructions are currently only generated if fsub node is
present.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34507
llvm-svn: 311862
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
This change introduces additional machine instructions in functions
dealing with the expansion of msa pseudo f16 instructions due to
register classes being inappropriate when checked with machine
verifier.
Differential Revision: https://reviews.llvm.org/D34276
llvm-svn: 308301
Addition of a feature and a predicate used to control generation of madd.fmt
and similar instructions.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33400
llvm-svn: 304801
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
llvm-svn: 292117
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 283334
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 282485
As part of this effort, remove MipsFCmp nodes and use tablegen
patterns rather than custom lowering through C++.
Unexpectedly, this improves codesize for microMIPS as previous floating
point setcc expansions would materialize 0 and 1 into GPRs before using
the relevant mov[tf].[sd] instruction. Now $zero is used directly.
Reviewers: dsanders, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23118
llvm-svn: 281022
The names of the tablegen defs now match the names of the ISD nodes.
This makes the world a slightly saner place, as previously "fround" matched
ISD::FP_ROUND and not ISD::FROUND.
Differential Revision: https://reviews.llvm.org/D23597
llvm-svn: 279129
Michael Roe