The new naming is (to me) much easier to understand. Here is a summary
of the new state of the world:
- '*Threshold' is the threshold for full unrolling. It is measured
against the estimated unrolled cost as computed by getUserCost in TTI
(or CodeMetrics, etc). We will exceed this threshold when unrolling
loops where unrolling exposes a significant degree of simplification
of the logic within the loop.
- '*PercentDynamicCostSavedThreshold' is the percentage of the loop's
estimated dynamic execution cost which needs to be saved by unrolling
to apply a discount to the estimated unrolled cost.
- '*DynamicCostSavingsDiscount' is the discount applied to the estimated
unrolling cost when the dynamic savings are expected to be high.
When actually analyzing the loop, we now produce both an estimated
unrolled cost, and an estimated rolled cost. The rolled cost is notably
a dynamic estimate based on our analysis of the expected execution of
each iteration.
While we're still working to build up the infrastructure for making
these estimates, to me it is much more clear *how* to make them better
when they have reasonably descriptive names. For example, we may want to
apply estimated (from heuristics or profiles) dynamic execution weights
to the *dynamic* cost estimates. If we start doing that, we would also
need to track the static unrolled cost and the dynamic unrolled cost, as
only the latter could reasonably be weighted by profile information.
This patch is sadly not without functionality change for the new unroll
analysis logic. Buried in the heuristic management were several things
that surprised me. For example, we never subtracted the optimized
instruction count off when comparing against the unroll heursistics!
I don't know if this just got lost somewhere along the way or what, but
with the new accounting of things, this is much easier to keep track of
and we use the post-simplification cost estimate to compare to the
thresholds, and use the dynamic cost reduction ratio to select whether
we can exceed the baseline threshold.
The old values of these flags also don't necessarily make sense. My
impression is that none of these thresholds or discounts have been tuned
yet, and so they're just arbitrary placehold numbers. As such, I've not
bothered to adjust for the fact that this is now a discount and not
a tow-tier threshold model. We need to tune all these values once the
logic is ready to be enabled.
Differential Revision: http://reviews.llvm.org/D9966
llvm-svn: 239164
isInductionPHI wants to calculate the stride based on the pointee size.
However, this is not possible when the pointee is zero sized.
This fixes PR23763.
llvm-svn: 239143
I don't have the IR which is causing the build bot breakage but I can
postulate as to why they are timing out:
1. SimplifyWithOpReplaced was stripping flags from the simplified value.
2. visitSelectInstWithICmp was overriding SimplifyWithOpReplaced because
it's simplification wasn't correct.
3. InstCombine would revisit the add instruction and note that it can
rederive the flags.
4. By modifying the value, we chose to revisit instructions which reuse
the value. One of the instructions is the original select, causing
LLVM to never reach fixpoint.
Instead, strip the flags only when we are sure we are going to perform
the simplification.
llvm-svn: 239141
We cleverly handle cases where computation done in one argument of a select
instruction is suitable for the other operand, thus obviating the need
of the select and the comparison. However, the other operand cannot
have flags.
This fixes PR23757.
llvm-svn: 239115
We don't need to go through LSR to trigger this bug. Instead,
hand-craft a tricky GEP and get the constant folder to hack on it when
parsing the IR.
llvm-svn: 239017
Summary:
Once a gc.statepoint has been rewritten to relocate live references, the
SSA values represent physical pointers instead of logical references.
Logical dereferencability does not imply physical dereferencability and
after RewriteStatepointsForGC has run any attributes that imply
dereferencability of the logical references need to be stripped.
This current approach is conservative, and can be made more precise
later if needed. For starters, we need to strip dereferencable
attributes only from pointers that live in the GC address space.
Reviewers: reames, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10105
llvm-svn: 238883
Unreachable values may use themselves in strange ways due to their
dominance property. Attempting to translate through them can lead to
infinite recursion, crashing LLVM. Instead, claim that we weren't able
to translate the value.
This fixes PR23096.
llvm-svn: 238702
The patch evaluates the expansion cost of exitValue in indVarSimplify pass, and only does the rewriting when the expansion cost is low or loop can be deleted with the rewriting. It provides an option "-replexitval=" to control the default aggressiveness of the exitvalue rewriting. It also fixes some missing cases in SCEVExpander::isHighCostExpansionHelper to enhance the evaluation of SCEV expansion cost.
Differential Revision: http://reviews.llvm.org/D9800
llvm-svn: 238507
Currently we only fold a BitCast into a Load when the BitCast is its
only user.
Do the same for any no-op cast.
Differential Revision: http://reviews.llvm.org/D9152
llvm-svn: 238452
Canonicalizing 'x [+-] (-Constant * y)' is not a win if we don't *know*
we will open up CSE opportunities.
If the multiply was 'nsw', then negating 'y' requires us to clear the
'nsw' flag. If this is actually worth pursuing, it is probably more
appropriate to do so in GVN or EarlyCSE.
This fixes PR23675.
llvm-svn: 238397
Summary:
This patch made two improvements to NaryReassociate and the NVPTX pipeline
1. Run EarlyCSE/GVN after NaryReassociate to get rid of redundant common
expressions.
2. When adding an instruction to SeenExprs, maps both the SCEV before and after
reassociation to that instruction.
Test Plan: updated @reassociate_gep_nsw in nary-gep.ll
Reviewers: meheff, broune
Reviewed By: broune
Subscribers: dberlin, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9947
llvm-svn: 238396
model the dense vector instruction bonuses.
Previously, this code really didn't effectively compute the density of
inlined vector instructions and apply the intended inliner bonus. It
would try to compute it repeatedly while analyzing the function and
didn't handle the case where future vector instructions would tip the
scales back towards the bonus.
Instead, speculatively apply all possible bonuses to the threshold
initially. Once we *know* that a certain bonus can not be applied,
subtract it. This should delay early bailout enough to get much more
consistent results without actually causing us to analyze huge swaths of
code. I expect some (hopefully mild) compile time hit here, and some
swings in performance, but this was definitely the intended behavior of
these bonuses.
This also dramatically simplifies the computation of the bonuses to not
interact with each other in confusing ways. The previous code didn't do
a good job of this and the values for bonuses may be surprising but are
at least now clearly written in the code.
Finally, fix code to be in line with comments and use zero as the
bailout condition.
Patch by Easwaran Raman, with some comment tweaks by me to try and
further clarify what is going on with this code.
http://reviews.llvm.org/D8267
llvm-svn: 238276
Summary:
In case of functions that have a pointer argument and only pass it to
each other, the function attributes pass deduces that the pointer should
get the readnone attribute, but fails to remove a readonly attribute
that may already have been present.
Reviewers: nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9995
llvm-svn: 238152
This patch extends EarlyCSE to take advantage of the information that a controlling branch gives us about the value of a Value within this and dominated basic blocks. If the current block has a single predecessor with a controlling branch, we can infer what the branch condition must have been to execute this block. The actual change to support this is downright simple because EarlyCSE's existing scoped hash table logic deals with most of the complexity around merging.
The patch actually implements two optimizations.
1) The first is analogous to JumpThreading in that it enables EarlyCSE's CSE handling to fold branches which are exactly redundant due to a previous branch to branches on constants. (It doesn't actually replace the branch or change the CFG.) This is pretty clearly a win since it enables substantial CFG simplification before we start trying to inline.
2) The second is analogous to CVP in that it exploits the knowledge gained to replace dominated *uses* of the original value. EarlyCSE does not otherwise reason about specific uses, so this is the more arguable one. It does enable further simplication and constant folding within the rest of the visit by EarlyCSE.
In both cases, the added code only handles the easy dominance based case of each optimization. The general case is deferred to the existing passes.
Differential Revision: http://reviews.llvm.org/D9763
llvm-svn: 238071
InstCombine transforms A *nsw B +nsw A *nsw C to A *nsw (B + C).
This is incorrect -- e.g. if A = -1, B = 1, C = INT_SMAX. Then
nothing in the LHS overflows, but the multiplication in RHS overflows.
We need to first make sure that we won't multiple by INT_SMAX + 1.
Test case `add_of_mul` contributed by Sanjoy Das.
This fixes PR23635.
Differential Revision: http://reviews.llvm.org/D9629
llvm-svn: 238066
This change does a few things:
- Move some InstCombine transforms to InstSimplify
- Run SimplifyCall from within InstCombine::visitCallInst
- Teach InstSimplify to fold [us]mul_with_overflow(X, undef) to 0.
llvm-svn: 237995
PR23608 pointed out that using the preheader to gain a context instruction isn't always legal because a loop might not have a preheader. When looking into that, I realized that using the preheader to determine legality for sinking is questionable at best. Given no test covers that case and the original commit didn't seem to intend it, I restructured the code to only ask context sensative queries for hoising of loads and stores. This is effectively a partial revert of 237593.
llvm-svn: 237985
Summary:
x = &a[i];
y = &a[i + j];
=>
y = x + j;
along with some refactoring work such as extracting method
findClosestMatchingDominator.
Depends on D9786 which provides the ScalarEvolution::getGEPExpr interface.
Test Plan: nary-gep.ll
Reviewers: meheff, broune
Reviewed By: broune
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9802
llvm-svn: 237971
On X86 (and similar OOO cores) unrolling is very limited, and even if the
runtime unrolling is otherwise profitable, the expense of a division to compute
the trip count could greatly outweigh the benefits. On the A2, we unroll a lot,
and the benefits of unrolling are more significant (seeing a 5x or 6x speedup
is not uncommon), so we're more able to tolerate the expense, on average, of a
division to compute the trip count.
llvm-svn: 237947
In effect a partial revert of r237858, which was a dumb shortcut.
Looking at the dependencies of the destination should be the proper
fix: if the new memset would depend on anything other than itself,
the transformation isn't correct.
llvm-svn: 237874
Fixes PR23599, another miscompile introduced by r235232: when there is
another dependency on the destination of the created memset (i.e., the
part of the original destination that the memcpy doesn't depend on)
between the memcpy and the original memset, we would insert the created
memset after the memcpy, and thus after the other dependency.
Instead, insert the created memset right after the old one.
llvm-svn: 237858
Make sure if we're truncating a constant that would then be sign extended
that the sign extension of the truncated constant is the same as the
original constant.
> Canonicalize min/max expressions correctly.
>
> This patch introduces a canonical form for min/max idioms where one operand
> is extended or truncated. This often happens when the other operand is a
> constant. For example:
>
> %1 = icmp slt i32 %a, i32 0
> %2 = sext i32 %a to i64
> %3 = select i1 %1, i64 %2, i64 0
>
> Would now be canonicalized into:
>
> %1 = icmp slt i32 %a, i32 0
> %2 = select i1 %1, i32 %a, i32 0
> %3 = sext i32 %2 to i64
>
> This builds upon a patch posted by David Majenemer
> (https://www.marc.info/?l=llvm-commits&m=143008038714141&w=2). That pass
> passively stopped instcombine from ruining canonical patterns. This
> patch additionally actively makes instcombine canonicalize too.
>
> Canonicalization of expressions involving a change in type from int->fp
> or fp->int are not yet implemented.
llvm-svn: 237821
This change adds a new GC strategy for supporting the CoreCLR runtime.
This strategy is currently identical to Statepoint-example GC,
but is necessary for several upcoming changes specific to CoreCLR, such as:
1. Base-pointers not explicitly reported for interior pointers
2. Different format for stack-map encoding
3. Location of Safe-point polls: polls are only needed before loop-back edges and before tail-calls (not needed at function-entry)
4. Runtime specific handshake between calls to managed/unmanaged functions.
llvm-svn: 237753
We were special casing a handful of intrinsics as not needing a safepoint before them. After running into another valid case - memset - I took a closer look and realized that almost no intrinsics need to have a safepoint poll before them. Restructure the code to make that apparent so that we stop hitting these bugs. The only intrinsics which need a safepoint poll before them are ones which can run arbitrary code.
llvm-svn: 237744
Summary:
Introduce dereferenceable, dereferenceable_or_null metadata for loads
with the same semantic as corresponding attributes.
This patch depends on http://reviews.llvm.org/D9253
Patch by Artur Pilipenko!
Reviewers: hfinkel, sanjoy, reames
Reviewed By: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9365
llvm-svn: 237720
Summary: When PlaceSafepoints pass replaces old return result with gc_result from statepoint, it asserts that gc_result can not have preceding phis in its parent block. This is only true on invoke statepoint, which terminates the block and puts its result at the beginning of the normal successor block. Call statepoint does not terminate the block and thus its result is in the same block with it. There should be no restriction on whether there are phis or not.
Reviewers: reames, igor-laevsky
Reviewed By: igor-laevsky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9803
llvm-svn: 237597
Summary:
Allow hoisting of loads from values marked with dereferenceable_or_null
attribute. For values marked with the attribute perform
context-sensitive analysis to determine whether it's known-non-null or
not.
Patch by Artur Pilipenko!
Reviewers: hfinkel, sanjoy, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9253
llvm-svn: 237593
At the present time, we don't have a way to represent general dependency
relationships, so everything is represented using memory dependency. In order
to preserve the data dependency of a READ_REGISTER on WRITE_REGISTER, we need
to model WRITE_REGISTER as writing (which we had been doing) and model
READ_REGISTER as reading (which we had not been doing). Fix this, and also the
way that the chain operands were generated at the SDAG level.
Patch by Nicholas Paul Johnson, thanks! Test case by me.
llvm-svn: 237584
"Store to invariant address..." is moved as the last line. This is not
the prime result of the analysis. Plus it simplifies some of the tests.
llvm-svn: 237573
SimplifyDemandedBits was "simplifying" a constant by removing just sign bits.
This caused a canonicalization race between different parts of instcombine.
Fix and regression test added - third time lucky?
llvm-svn: 237539
The AArch64 LNT bot is unhappy - I've found that the problem is in
SimpliftDemandedBits, but that's going to require another code review
so reverting in the meantime.
llvm-svn: 237528
... I'd copied the check-next lines from a previous test so they were
slightly wrong, and had managed to test the wrong source tree. D'oh!
llvm-svn: 237521
The test timeouts were due to instcombine fighting itself. Regression test added.
Original log message:
Canonicalize min/max expressions correctly.
This patch introduces a canonical form for min/max idioms where one operand
is extended or truncated. This often happens when the other operand is a
constant. For example:
%1 = icmp slt i32 %a, i32 0
%2 = sext i32 %a to i64
%3 = select i1 %1, i64 %2, i64 0
Would now be canonicalized into:
%1 = icmp slt i32 %a, i32 0
%2 = select i1 %1, i32 %a, i32 0
%3 = sext i32 %2 to i64
This builds upon a patch posted by David Majenemer
(https://www.marc.info/?l=llvm-commits&m=143008038714141&w=2). That pass
passively stopped instcombine from ruining canonical patterns. This
patch additionally actively makes instcombine canonicalize too.
Canonicalization of expressions involving a change in type from int->fp
or fp->int are not yet implemented.
llvm-svn: 237520
There's no point in copying around constants, so, when all else fails,
we can still transform memcpy of memset into two independent memsets.
To quote the example, we can turn:
memset(dst1, c, dst1_size);
memcpy(dst2, dst1, dst2_size);
into:
memset(dst1, c, dst1_size);
memset(dst2, c, dst2_size);
When dst2_size <= dst1_size.
Like r235232 for copy constructors, this can occur in move constructors.
Differential Revision: http://reviews.llvm.org/D9682
llvm-svn: 237506
Summary:
This is a pass for speculative execution of instructions for simple if-then (triangle) control flow. It's aimed at GPUs, but could perhaps be used in other contexts. Enabling this pass gives us a 1.0% geomean improvement on Google benchmark suites, with one benchmark improving 33%.
Credit goes to Jingyue Wu for writing an earlier version of this pass.
Patched by Bjarke Roune.
Test Plan:
This patch adds a set of tests in test/Transforms/SpeculativeExecution/spec.ll
The pass is controlled by a flag which defaults to having the pass not run.
Reviewers: eliben, dberlin, meheff, jingyue, hfinkel
Reviewed By: jingyue, hfinkel
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9360
llvm-svn: 237459
This reverts r237453 - it was causing timeouts on some bots. Reverting
while I investigate (it's probably InstCombine fighting itself...)
llvm-svn: 237458
Summary:
Consider (B | i) * S as (B + i) * S if B and i have no bits set in
common.
Test Plan: @or in slsr-mul.ll
Reviewers: broune, meheff
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9788
llvm-svn: 237456
This patch introduces a canonical form for min/max idioms where one operand
is extended or truncated. This often happens when the other operand is a
constant. For example:
%1 = icmp slt i32 %a, i32 0
%2 = sext i32 %a to i64
%3 = select i1 %1, i64 %2, i64 0
Would now be canonicalized into:
%1 = icmp slt i32 %a, i32 0
%2 = select i1 %1, i32 %a, i32 0
%3 = sext i32 %2 to i64
This builds upon a patch posted by David Majenemer
(https://www.marc.info/?l=llvm-commits&m=143008038714141&w=2). That pass
passively stopped instcombine from ruining canonical patterns. This
patch additionally actively makes instcombine canonicalize too.
Canonicalization of expressions involving a change in type from int->fp
or fp->int are not yet implemented.
llvm-svn: 237453
This has caused some local failures. Updating the test case to be more
like the majority of the similar test cases.
Committing on behalf of Hubert Tong (hstong@ca.ibm.com).
llvm-svn: 237449
Transfer the calling convention from the invoke being replaced by
PlaceStatepoints to the new invoke to gc.statepoint created. Add a test
case that would have caught this issue.
llvm-svn: 237414
rL236672 would generate all invoke statepoints with deopt args set to a
list containing the single element "0", instead of an empty list.
Also add a test case that would have caught this.
llvm-svn: 237413
Summary:
Extract method haveNoCommonBitsSet so that we don't have to duplicate this logic in
InstCombine and SeparateConstOffsetFromGEP.
This patch also makes SeparateConstOffsetFromGEP more precise by passing
DominatorTree to computeKnownBits.
Test Plan: value-tracking-domtree.ll that tests ValueTracking indeed leverages dominating conditions
Reviewers: broune, meheff, majnemer
Reviewed By: majnemer
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9734
llvm-svn: 237407
This is to cleanup some redundency generated by LoopUnroll pass. Such redundency may not be cleaned up by existing passes after LoopUnroll.
Differential Revision: http://reviews.llvm.org/D9777
llvm-svn: 237395
Function 'ConstantFoldScalarCall' (in ConstantFolding.cpp) works under the
wrong assumption that a call to 'convert.from.fp16' returns a value of
type 'float'.
However, intrinsic 'convert.from.fp16' can be overloaded; for example, we
can call 'convert.from.fp16.f64' to convert from half to double; etc.
Before this patch, the following example would have triggered an assertion
failure in opt (with -constprop):
```
define double @foo() {
entry:
%0 = call double @llvm.convert.from.fp16.f64(i16 0)
ret double %0
}
```
This patch fixes the problem in ConstantFolding.cpp. When folding a call to
convert.from.fp16, we perform a different kind of conversion based on the call
return type.
Added test 'Transform/ConstProp/convert-from-fp16.ll'.
Differential Revision: http://reviews.llvm.org/D9771
llvm-svn: 237377
Summary:
This implements the initial version as was proposed earlier this year
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-January/080462.html).
Since then Loop Access Analysis was split out from the Loop Vectorizer
and was made into a separate analysis pass. Loop Distribution becomes
the second user of this analysis.
The pass is off by default and can be enabled
with -enable-loop-distribution. There is currently no notion of
profitability; if there is a loop with dependence cycles, the pass will
try to split them off from other memory operations into a separate loop.
I decided to remove the control-dependence calculation from this first
version. This and the issues with the PDT are actively discussed so it
probably makes sense to treat it separately. Right now I just mark all
terminator instruction required which keeps identical CFGs for each
distributed loop. This seems to be working pretty well for 456.hmmer
where even though there is an empty if-then block in the distributed
loop initially, it gets completely removed.
The pass keeps DominatorTree and LoopInfo updated. I've tested this
with -loop-distribute-verify with the testsuite where we distribute ~90
loops. SimplifyLoop is violated in some cases and I have a FIXME
covering this.
Reviewers: hfinkel, nadav, aschwaighofer
Reviewed By: aschwaighofer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8831
llvm-svn: 237358
Summary:
This patch teaches the PlaceSafepoints pass about two `CallSite`
function attributes:
* "statepoint-id": if the string value of this attribute can be parsed
as an integer, then it is propagated to the ID parameter of the
statepoint created.
* "statepoint-num-patch-bytes": if the string value of this attribute
can be parsed as an integer, then it is propagated to the `num patch
bytes` parameter of the statepoint created.
This change intentionally does not assert on a malformed value for these
attributes, given that they're not "official" attributes.
Reviewers: reames, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9735
llvm-svn: 237286
Avoid running forever by checking we are not reassociating an expression into
the same form.
Tested with @avoid_infinite_loops in nary-add.ll
llvm-svn: 237269
This patch uses the new function profile metadata "function_entry_count"
to annotate entry counts from sample profiles.
In a sampling profile, the total samples collected at the function entry
are an approximation for the number of times that function was invoked.
llvm-svn: 237265
Summary:
This change adds two new parameters to the statepoint intrinsic, `i64 id`
and `i32 num_patch_bytes`. `id` gets propagated to the ID field
in the generated StackMap section. If the `num_patch_bytes` is
non-zero then the statepoint is lowered to `num_patch_bytes` bytes of
nops instead of a call (the spill and reload code remains unchanged).
A non-zero `num_patch_bytes` is useful in situations where a language
runtime requires complete control over how a call is lowered.
This change brings statepoints one step closer to patchpoints. With
some additional work (that is not part of this patch) it should be
possible to get rid of `TargetOpcode::STATEPOINT` altogether.
PlaceSafepoints generates `statepoint` wrappers with `id` set to
`0xABCDEF00` (the old default value for the ID reported in the stackmap)
and `num_patch_bytes` set to `0`. This can be made more sophisticated
later.
Reviewers: reames, pgavlin, swaroop.sridhar, AndyAyers
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9546
llvm-svn: 237214
Summary:
If the branch that leads to the PHI node and the Select instruction
depend on correlated conditions, we might be able to directly use the
corresponding value from the Select instruction as the incoming value
for the PHI node, allowing later removal of the select instruction.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9051
llvm-svn: 237201
When relocating a pointer, we need to determine a base pointer for the derived pointer being relocated. We have limited support for handling a pointer extracted from a vector; the current code only handled the case where the entire vector was known to contain base pointers. This patch extends the reasoning to handle chains of insertelements where the indices are constants. This case turns out to be fairly common in vectorized code. We can now handle vectors which contains mixtures of base and derived pointers provided the insertelements use constant indices.
Note that this doesn't solve the general problem. To handle variable indexed insertelements, we'd need to scalarize and introduce conditional branching based on the index. Alternatively, we could eagerly scalarize, but the code structure doesn't currently make either fix easy. The patch also doesn't handle shufflevector or other vector manipulation for much the same reasons. I plan to defer this work until I have a motivating test case.
Differential Revision: http://reviews.llvm.org/D9676
llvm-svn: 237200
As a step towards getting rid of internal pass manager hack entirely, remove the need for loop simplify to run in the inner pass manager. The new code does produce slightly different loop structures, so this isn't technically NFC.
Differential Revision: http://reviews.llvm.org/D9585
llvm-svn: 237172
Summary:
This patch reimplements heuristic that tries to estimate optimization beneftis
from complete loop unrolling.
In this patch I kept the minimal changes - e.g. I removed code handling
branches and folding compares. That's a promising area, but now there
are too many questions to discuss before we can enable it.
Test Plan: Tests are included in the patch.
Reviewers: hfinkel, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8816
llvm-svn: 237156
This fixes another miscompile introduced by r235232: when there was a
dependency on the memcpy destination other than the memset, we would
ignore it, because we only looked at the source dependency.
It was a mistake to use SrcDepInfo. Instead, just use DepInfo.
llvm-svn: 237066
Summary:
In RewriteStatepointsForGC pass, we create a gc_relocate intrinsic for
each relocated pointer, and the gc_relocate has the same type with the
pointer. During the creation of gc_relocate intrinsic, llvm requires to
mangle its type. However, llvm does not support mangling of all possible
types. RewriteStatepointsForGC will hit an assertion failure when it
tries to create a gc_relocate for pointer to vector of pointers because
mangling for vector of pointers is not supported.
This patch changes the way RewriteStatepointsForGC pass creates
gc_relocate. For each relocated pointer, we erase the type of pointers
and create an unified gc_relocate of type i8 addrspace(1)*. Then a
bitcast is inserted to convert the gc_relocate to the correct type. In
this way, gc_relocate does not need to deal with different types of
pointers and the unsupported type mangling is no longer a problem. This
change would also ease further merge when LLVM erases types of pointers
and introduces an unified pointer type.
Some minor changes are also introduced to gc_relocate related part in
InstCombineCalls, CodeGenPrepare, and Verifier accordingly.
Patch by Chen Li!
Reviewers: reames, AndyAyers, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9592
llvm-svn: 237009
The QPX single-precision load/store intrinsics have implied
truncation/extension from/to the declared value type of <4 x double> to the
memory type of <4 x float>. When we can prove the alignment of the pointer
argument, and thus replace the intrinsic with a regular load or store, we need
to load or store the correct data type (<4 x float>) instead of (<4 x double>).
llvm-svn: 236973
This changes the shape of the statepoint intrinsic from:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 unused, ...call args, i32 # deopt args, ...deopt args, ...gc args)
to:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 flags, ...call args, i32 # transition args, ...transition args, i32 # deopt args, ...deopt args, ...gc args)
This extension offers the backend the opportunity to insert (somewhat) arbitrary code to manage the transition from GC-aware code to code that is not GC-aware and back.
In order to support the injection of transition code, this extension wraps the STATEPOINT ISD node generated by the usual lowering lowering with two additional nodes: GC_TRANSITION_START and GC_TRANSITION_END. The transition arguments that were passed passed to the intrinsic (if any) are lowered and provided as operands to these nodes and may be used by the backend during code generation.
Eventually, the lowering of the GC_TRANSITION_{START,END} nodes should be informed by the GC strategy in use for the function containing the intrinsic call; for now, these nodes are instead replaced with no-ops.
Differential Revision: http://reviews.llvm.org/D9501
llvm-svn: 236888
Summary:
I noticed this bug when deubging a WIP on LSR. I wonder whether and how we
should add a regression test for this.
Test Plan: no tests failed.
Reviewers: atrick
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D9536
llvm-svn: 236887
Summary:
One step further getting aggregate loads and store being optimized
properly. This will only handle struct with one element at this point.
Test Plan: Added unit tests for the new supported cases.
Reviewers: chandlerc, joker-eph, joker.eph, majnemer
Reviewed By: majnemer
Subscribers: pete, llvm-commits
Differential Revision: http://reviews.llvm.org/D8339
Patch by Amaury Sechet.
From: Amaury Sechet <amaury@fb.com>
llvm-svn: 236695
If we have recognized that a conditional is constant at a particular location in the code (while trying to decide if we can simplify a conditional branch), we can eagerly replace that condition with a constant if it's definition is post dominated by the branch in question.
In practice, this ends up being a compile time savings at most. JumpThreading would have visited each using branch anyways. CVP would have visited the cmp itself again. Unless LVI gives up early, we shouldn't gain any addition power by doing this transformation early. What we do gain is simplicity and compile time.
Differential Revision: http://reviews.llvm.org/D9312
llvm-svn: 236684
options.
This commit fixes a bug in llc and opt where "-mcpu" and "-mattr" wouldn't
override function attributes "-target-cpu" and "-target-features" in the IR.
Differential Revision: http://reviews.llvm.org/D9537
llvm-svn: 236677
Renames the original CreateGCStatepoint to CreateGCStatepointCall, and
moves invoke creating functionality from PlaceSafepoints.cpp to
IRBuilder.cpp.
This changes the labels generated for PlaceSafepoints/invokes.ll so use
a regex there to make the basic block labels more resilient.
llvm-svn: 236672
Summary:
When computing branch weights in BPI, we used to disallow branches with
weight 0. This is a minor nuisance, because a branch with weight 0 is
different to "don't have information". In the context of
instrumentation, it may mean "never executed", in the context of
sampling, it means "never or seldom executed".
In allowing 0 weight branches, I ran into issues with the switch
expansion code in selection DAG. It is currently hardwired to not handle
branches with weight 0. To maintain the current behaviour, I changed it
to use 1 when it finds 0, but perhaps the algorithm needs changes to
tolerate branches with weight zero.
Reviewers: hansw
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9533
llvm-svn: 236617
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
llvm-svn: 236613
COMDAT groups which have become rendered unused because of inline are
discardable if we can prove that we've made the group empty.
This fixes PR22285.
llvm-svn: 236539
It got this in some cases (if one of them was an identified object), but not in all cases.
This caused stores to undef to block load-forwarding in some cases, etc.
Added test to Transforms/GVN to verify optimization occurs as expected.
llvm-svn: 236511
When optimizing demanded bits of the operands of an Add we have to
remove the nsw/nuw flags as we have no guarantee anymore that we don't
wrap. This is legal here because the top bit is not demanded. In fact
this operaion was already performed but missed in the case of an Add
with a constant on the right side. To fix this this patch refactors the
code to unify the code paths in SimplifyDemandedUseBits() handling of
Add/Sub:
- The transformation of Add->Or is removed from the simplify demand
code because the equivalent transformation exists in
InstCombiner::visitAdd()
- KnownOnes/KnownZero are not adjusted for Add x, C anymore as
computeKnownBits() already performs these computations.
- The simplification of the operands is unified. In this new version
constant on the right side of a Sub are shrunk now as I could not find
a reason why not to do so.
- The special case for clearing nsw/nuw in ShrinkDemandedConstant() is
not necessary anymore as the caller does that already.
Differential Revision: http://reviews.llvm.org/D9415
llvm-svn: 236269
Summary:
Optimizing these well are especially interesting for IRCE since it
"clamps" values by generating this sort of pattern through SCEV
expressions.
Depends on D9352.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9353
llvm-svn: 236203
Summary:
After this change `MatchSelectPattern` recognizes the following form
of SMIN:
Y >s C ? ~Y : ~C == ~Y <s ~C ? ~Y : ~C = SMIN(~Y, ~C)
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9352
llvm-svn: 236202
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Summary:
This patch adds constant folding of insertelement instruction to undef value when index operand is constant and is not less than vector size or is undef.
InstCombine does not support this case, but I'm happy to add it there also if this change is accepted.
Test Plan: Unittests and regression tests for ConstProp pass.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9287
llvm-svn: 235854
There can be various constant pointers in the IR which do not get relocated at a safepoint. One example is the address of a global variable. Another example is a pointer created via inttoptr. Note that the optimizer itself likes to create such inttoptrs when locally propagating constants through dynamically dead code.
To deal with this, we need to exclude uses of constants from contributing to the liveness of a safepoint which might reach that use. At some later date, it might be worth exploring what could be done to support the relocation of various special types of "constants", but that's future work.
Differential Revision: http://reviews.llvm.org/D9236
llvm-svn: 235821
llvm.frameescape() intrinsic is not a real call. The intrinsic can only exist in the entry block. Inserting a gc.statepoint() before llvm.frameescape() may split the entry block, and push the intrinsic out of the entry block.
Patch by: Swaroop.Sridhar@microsoft.com
Differential Revision: http://reviews.llvm.org/D8910
llvm-svn: 235820
This is a follow-on to D8833 (insertps optimization when the zero mask is not used).
In this patch, we check for the case where the zmask is used, but both input vectors
to the insertps intrinsic are the same operand or the zmask overrides the destination
lane. This lets us replace the 2nd shuffle input operand with the zero vector.
Differential Revision: http://reviews.llvm.org/D9257
llvm-svn: 235810
When using bit tests for hole checks, we call AddPredecessorToBlock to give the
phi node a value from the bit test block. This would break if we've
previously called removePredecessor on the default destination because the
switch is fully covered.
Test case by Mark Lacey.
llvm-svn: 235771
Same as r235145 for the call instruction - the justification, tradeoffs,
etc are all the same. The conversion script worked the same without any
false negatives (after replacing 'call' with 'invoke').
llvm-svn: 235755
Summary:
We pick this order because SeparateConstOffsetFromGEP may create more
opportunities for SLSR.
Test Plan:
reassociate-geps-and-slsr.ll
no performance regression on internal benchmarks
Reviewers: meheff
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D9230
llvm-svn: 235632
Only clear out the NSW/NUW flags if we are optimizing 'add'/'sub' while
taking advantage that the sign bit is not set. We do this optimization
to further shrink the mask but shrinking the mask isn't NSW/NUW
preserving in this case.
llvm-svn: 235558
An nsw/nuw operation relies on the values feeding into it to not
overflow if 'poison' is not to be produced. This means that
optimizations which make modifications to the bottom of a chain (like
SimplifyDemandedBits) must strip out nsw/nuw if they cannot ensure that
they will be preserved.
This fixes PR23309.
llvm-svn: 235544
https://llvm.org/bugs/show_bug.cgi?id=23163.
Gep merging sometimes behaves like a reverse CSE/LICM optimization,
which has negative impact on performance. In this patch we restrict
gep merging to happen only when the indexes to be merged are both consts,
which ensures such merge is always beneficial.
The patch makes gep merging only happen in very restrictive cases.
It is possible that some analysis/optimization passes rely on the merged
geps to get better result, and we havn't notice them yet. We will be ready
to further improve it once we see the cases.
Differential Revision: http://reviews.llvm.org/D8911
llvm-svn: 235455
https://llvm.org/bugs/show_bug.cgi?id=23163.
Gep merging sometimes behaves like a reverse CSE/LICM optimizations,
which has negative impact on performance. In this patch we restrict
gep merging to happen only when the indexes to be merged are both consts,
which ensures such merge is always beneficial.
The patch makes gep merging only happen in very restrictive cases.
It is possible that some analysis/optimization passes rely on the merged
geps to get better result, and we havn't notice them yet. We will be ready
to further improve it once we see the cases.
Differential Revision: http://reviews.llvm.org/D9007
llvm-svn: 235451
MemIntrinsic::getDest() looks through pointer casts, and using it
directly when building the new GEP+memset results in stuff like:
%0 = getelementptr i64* %p, i32 16
%1 = bitcast i64* %0 to i8*
call ..memset(i8* %1, ...)
instead of the correct:
%0 = bitcast i64* %p to i8*
%1 = getelementptr i8* %0, i32 16
call ..memset(i8* %1, ...)
Instead, use getRawDest, which just gives you the i8* value.
While there, use the memcpy's dest, as it's live anyway.
In most cases, when the optimization triggers, the memset and memcpy
sizes are the same, so the built memset is 0-sized and eliminated.
The problem occurs when they're different.
Fixes a regression caused by r235232: PR23300.
llvm-svn: 235419
Summary:
After we rewrite a candidate, the instructions used by the old form may
become unused. This patch cleans up these unused instructions so that we
needn't run DCE after SLSR.
Test Plan: removed -dce in all the SLSR tests
Reviewers: broune, meheff
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9101
llvm-svn: 235410
Summary: so that we needn't run DCE after this pass.
Test Plan: removed -dce from the commandline in split-gep.ll and split-gep-and-gvn.ll
Reviewers: meheff
Subscribers: llvm-commits, HaoLiu, hfinkel, jholewinski
Differential Revision: http://reviews.llvm.org/D9096
llvm-svn: 235409
This commit fixes the code which adds lifetime markers in InlineFunction to skip
zero-sized allocas instead of asserting on them.
rdar://problem/20531155
llvm-svn: 235312
Harden r235258 to support any integer bitwidth. The quick glance at
the reference made me think only i32 and i64 were valid types, but
they're not special, so any overload is legal.
Thanks to David Majnemer for noticing!
llvm-svn: 235261
Followup to r235232, which caused PR23278.
We can't assume the memset and memcpy sizes have the same type, as
nothing in the language reference prevents that.
Instead, zext both to i64 if they disagree.
While there, robustify tests by using i8 %c rather than i8 0 for the
memset character.
llvm-svn: 235258
A common idiom in some code is to do the following:
memset(dst, 0, dst_size);
memcpy(dst, src, src_size);
Some of the memset is redundant; instead, we can do:
memcpy(dst, src, src_size);
memset(dst + src_size, 0,
dst_size <= src_size ? 0 : dst_size - src_size);
Original patch by: Joel Jones
Differential Revision: http://reviews.llvm.org/D498
llvm-svn: 235232
Summary:
An alternative is to use a worklist approach. However, that approach
would break the traversing order so that we couldn't lookup SeenExprs
efficiently. I don't see a clear winner here, so I picked the easier approach.
Along with two minor improvements:
1. preserves ScalarEvolution by forgetting instructions replaced
2. removes dead code locally avoiding the need of running DCE afterwards
Test Plan: add to slsr-add.ll a test that requires multiple iterations
Reviewers: broune, dberlin, atrick, meheff
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9058
llvm-svn: 235151
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Summary:
This fixes a left-over efficiency issue in D8950.
As Andrew and Daniel suggested, we can store the candidates in a stack
and pop the top element when it does not dominate the current
instruction. This reduces the worst-case time complexity to O(n).
Test Plan: a new test in nary-add.ll that exercises this optimization.
Reviewers: broune, dberlin, meheff, atrick
Reviewed By: atrick
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D9055
llvm-svn: 235129
This is very similar to D8486 / r232852 (vperm2). If we treat insertps intrinsics
as shufflevectors, we can optimize them better.
I've left all but the full zero case of the zero mask variants out of this patch.
I don't think those can be converted into a single shuffle in all cases, but I'd
be happy to be proven wrong as I was for vperm2f128.
Either way, we'd need to support whatever sequence we come up with for those cases
in the backend before converting them here.
Differential Revision: http://reviews.llvm.org/D8833
llvm-svn: 235124
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
llvm-svn: 235050
Add missing `!dbg` attachments to `@llvm.dbg.*` intrinsics. I updated
these using a script (add-dbg-to-intrinsics.sh) that I'll attach to
PR22778 for posterity.
llvm-svn: 235040
Summary:
With this patch, SLSR may rewrite
S1: X = B + i * S
S2: Y = B + i' * S
to
S2: Y = X + (i' - i) * S
A secondary improvement: if (i' - i) is a power of 2, emit Y as X + (S << log(i' - i)). (S << log(i' -i)) is in a canonical form and thus more likely GVN'ed than (i' - i) * S.
Test Plan: slsr-add.ll
Reviewers: hfinkel, sanjoy, meheff, broune, eliben
Reviewed By: eliben
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8983
llvm-svn: 235019
Inlining such intrinsics is very difficult, since you need to
simultaneously transform many calls to llvm.framerecover and potentially
duplicate the functions containing them. Normally this intrinsic isn't
added until EH preparation, which is part of the backend pass pipeline
after inlining. However, if it were to get fed through the inliner,
this change will ensure that it doesn't break the code.
llvm-svn: 234937
Summary:
This transformation reassociates a n-ary add so that the add can partially reuse
existing instructions. For example, this pass can simplify
void foo(int a, int b) {
bar(a + b);
bar((a + 2) + b);
}
to
void foo(int a, int b) {
int t = a + b;
bar(t);
bar(t + 2);
}
saving one add instruction.
Fixes PR22357 (https://llvm.org/bugs/show_bug.cgi?id=22357).
Test Plan: nary-add.ll
Reviewers: broune, dberlin, hfinkel, meheff, sanjoy, atrick
Reviewed By: sanjoy, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8950
llvm-svn: 234855
Summary:
Runtime unrolling of loops needs to emit an expression to compute the
loop's runtime trip-count. Avoid runtime unrolling if this computation
will be expensive.
Depends on D8993.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8994
llvm-svn: 234846
Summary:
Teach `isHighCostExpansion` to consider divisions by power-of-two
constants as cheap and add a test case. This change is needed for a new
user of `isHighCostExpansion` that will be added in a subsequent change.
Depends on D8995.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8993
llvm-svn: 234845
Clean up a predicate I added in r229731, fix the relevant comment and
add a test case. The earlier version is confusing to read and was also
buggy (probably not a coincidence) till Alexey fixed it in r233881.
llvm-svn: 234701
When rewriting statepoints to make relocations explicit, we need to have a conservative but consistent notion of where a particular pointer is live at a particular site. The old code just used dominance, which is correct, but decidedly more conservative then it needed to be. This patch implements a simple dataflow algorithm that's run one per function (well, twice counting fixup after base pointer insertion). There's still lots of room to make this faster, but it's fast enough for all practical purposes today.
Differential Revision: http://reviews.llvm.org/D8674
llvm-svn: 234657
Two related small changes:
Various dominance based queries about liveness can get confused if we're talking about unreachable blocks. To avoid reasoning about such cases, just remove them before rewriting statepoints.
Remove single entry phis (likely left behind by LCSSA) to reduce the number of live values.
Both of these are motivated by http://reviews.llvm.org/D8674 which will be submitted shortly.
Differential Revision: http://reviews.llvm.org/D8675
llvm-svn: 234651
This patch adds limited support for inserting explicit relocations when there's a vector of pointers live over the statepoint. This doesn't handle the case where the vector contains a mix of base and non-base pointers; that's future work.
The current implementation just scalarizes the vector over the gc.statepoint before doing the explicit rewrite. An alternate approach would be to plumb the vector all the way though the backend lowering, but doing that appears challenging. In particular, the size of the indirect spill slot is currently assumed to be sizeof(pointer) throughout the backend.
In practice, this is enough to allow running the SLP and Loop vectorizers before RewriteStatepointsForGC.
Differential Revision: http://reviews.llvm.org/D8671
llvm-svn: 234647
Summary:
This change moves creating calls to `llvm.uadd.with.overflow` from
InstCombine to CodeGenPrep. Combining overflow check patterns into
calls to the said intrinsic in InstCombine inhibits optimization because
it introduces an intrinsic call that not all other transforms and
analyses understand.
Depends on D8888.
Reviewers: majnemer, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8889
llvm-svn: 234638
InstCombine didn't realize that it needs to use DataLayout to determine
how wide pointers are. This lead to assertion failures.
This fixes PR23113.
llvm-svn: 234046
Check that the `MDLocalVariable::getInlinedAt()` in a debug info
intrinsic's variable always matches the `MDLocation::getInlinedAt()` of
its `!dbg` attachment.
The goal here is to get rid of `MDLocalVariable::getInlinedAt()`
entirely (PR22778), since it's expensive and unnecessary, but I'll let
this verifier check bake for a while (a week maybe?) first. I've
updated the testcases that had the wrong value for `inlinedAt:`.
This checks that things are sane in the IR, but currently things go out
of whack in a few places in the backend. I'll follow shortly with
assertions in the backend (with code fixes).
If you have out-of-tree testcases that just started failing, here's how
I updated these ones:
1. The verifier check gives you the basic block, function, instruction,
and relevant metadata arguments (metadata numbering doesn't
necessarily match the source file, unfortunately).
2. Look at the `@llvm.dbg.*()` instruction, and compare the
`inlinedAt:` fields of the variable argument (second `metadata`
argument) and the `!dbg` attachment.
3. Figure out based on the variable `scope:` chain and the functions in
the file whether the variable has been inlined (and into what), so
you can determine which `inlinedAt:` is actually correct. In all of
the in-tree testcases, the `!MDLocation()` was correct and the
`!MDLocalVariable()` was wrong, but YMMV.
4. Duplicate the metadata that you're going to change, and add/drop the
`inlinedAt:` field from one of them. Be careful that the other
references to the same metadata node point at the correct one.
llvm-svn: 234021
Summary:
The old requirement on GEP candidates being in bounds is unnecessary.
For off-bound GEPs, we still have
&B[i * S] = B + (i * S) * e = B + (i * e) * S
Test Plan: slsr_offbound_gep in slsr-gep.ll
Reviewers: meheff
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8809
llvm-svn: 233949
We used to do this before refactorings around r225640.
Some clang users checked for _chk libcall availability using:
__has_builtin(__builtin___memcpy_chk)
When compiling with -fno-builtin, this is always true.
When passing -ffreestanding/-mkernel, which both imply -fno-builtin, we
end up with fortified libcalls, which isn't acceptable in a freestanding
environment which only provides their non-fortified counterparts.
Until we change clang and/or teach external users to check for availability
differently, disregard the "nobuiltin" attribute and TLI::has.
Workaround for PR23093.
llvm-svn: 233776
PPC_FP128 is really the sum of two consecutive doubles, where the first double
is always stored first in memory, regardless of the target endianness. The
memory layout of i128, however, depends on the target endianness, and so we
can't fold this without target endianness information. As a result, we must not
do this folding in lib/IR/ConstantFold.cpp (it could be done instead in
Analysis/ConstantFolding.cpp, but that's not done now).
Fixes PR23026.
llvm-svn: 233481
Fix testcases that don't pass the verifier after a WIP patch to check
`MDSubprogram` operands more effectively. I found the following issues:
- When `isDefinition: false`, the `variables:` field might point at
`!{i32 786468}`, or at a tuple that pointed at an empty tuple with
the comment "previously: invalid DW_TAG_base_type" (I vaguely recall
adding those comments during an upgrade script). In these cases, I
just dropped the array.
- The `variables:` field might point at something like `!{!{!8}}`,
where `!8` was an `MDLocation`. I removed the extra layer of
indirection.
- Invalid `type:` (not an `MDSubroutineType`).
llvm-svn: 233466
Change `llc` and `opt` to run `verifyModule()`. This ensures that we
check the full module before `FunctionPass::doInitialization()` ever
gets called (I was getting crashes in `DwarfDebug` instead of verifier
failures when testing a WIP patch that checks operands of compile
units). In `opt`, also move up debug-info-stripping so that it still
runs before verification.
There was a fair bit of broken code that was sitting in tree.
Interestingly, some were cases of a `select` that referred to itself in
`-instcombine` tests (apparently an intermediate result). I split them
off to `*-noverify.ll` tests with RUN lines like this:
opt < %s -S -disable-verify -instcombine | opt -S | FileCheck %s
This avoids verifying the input file (so we can get the broken code into
`-instcombine), but still verifies the output with a second call to
`opt` (to verify that `-instcombine` will clean it up like it should).
llvm-svn: 233432
Fix debug info in these tests, which started failing with a WIP patch to
verify compile units and types. The problems look like they were all
caused by bitrot. They fell into these categories:
- Using `!{i32 0}` instead of `!{}`.
- Using `!{null}` instead of `!{}`.
- Using `!MDExpression()` instead of `!{}`.
- Using `!8` instead of `!{!8}`.
- `file:` references that pointed at `MDCompileUnit`s instead of the
same `MDFile` as the compile unit.
- `file:` references that were numerically off-by-one or (off-by-ten).
llvm-svn: 233415
This re-adds float2int to the tree, after fixing PR23038. It turns
out the argument to APSInt() is true-if-unsigned, rather than
true-if-signed :(. Added testcase and explanatory comment.
llvm-svn: 233370
This was discussed a while back and I left it optional for migration. Since it's been far more than the 'week or two' that was discussed, time to actually make this manditory.
llvm-svn: 233357
Fix testcases whose variables are invalid. I'm working on a patch that
adds `Verifier` checks for `MDLocalVariable` (and `MDGlobalVariable`),
and these failed because:
- `scope:` fields need to point at `MDLocalScope` and can't be null.
- `file:` fields need to point at `MDFile`.
- `inlinedAt:` fields need to point at `MDLocation`.
llvm-svn: 233349
Summary:
This patch enhances SLSR to handle another candidate form &B[i * S]. If
we found two candidates
S1: X = &B[i * S]
S2: Y = &B[i' * S]
and S1 dominates S2, we can replace S2 with
Y = &X[(i' - i) * S]
Test Plan:
slsr-gep.ll
X86/no-slsr.ll: verify that we do not run SLSR on GEPs that already fit into
an addressing mode
Reviewers: eliben, atrick, meheff, hfinkel
Reviewed By: hfinkel
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D7459
llvm-svn: 233286
A load from an invariant location is assumed to not alias any otherwise potentially aliasing stores. Our implementation only applied this rule to store instructions themselves whereas they it should apply for any memory accessing instruction. This results in both FRE and PRE becoming more effective at eliminating invariant loads.
Note that as a follow on change I will likely move this into AliasAnalysis itself. That's where the TBAA constant flag is handled and the semantics are essentially the same. I'd like to separate the semantic change from the refactoring and thus have extended the hack that's already in MemoryDependenceAnalysis for this change.
Differential Revision: http://reviews.llvm.org/D8591
llvm-svn: 233140
This patch tries to merge duplicate landing pads when they branch to a common shared target.
Given IR that looks like this:
lpad1:
%exn = landingpad {i8*, i32} personality i32 (...)* @__gxx_personality_v0
cleanup
br label %shared_resume
lpad2:
%exn2 = landingpad {i8*, i32} personality i32 (...)* @__gxx_personality_v0
cleanup
br label %shared_resume
shared_resume:
call void @fn()
ret void
}
We can rewrite the users of both landing pad blocks to use one of them. This will generally allow the shared_resume block to be merged with the common landing pad as well.
Without this change, tail duplication would likely kick in - creating N (2 in this case) copies of the shared_resume basic block.
Differential Revision: http://reviews.llvm.org/D8297
llvm-svn: 233125
Assert that this doesn't fire - I'll remove all of this later, but just
leaving it in for a while in case this is firing & we just don't have
test coverage.
llvm-svn: 233116
This is the IR optimizer follow-on patch for D8563: the x86 backend patch
that converts this kind of shuffle back into a vperm2.
This is also a continuation of the transform that started in D8486.
In that patch, Andrea suggested that we could convert vperm2 intrinsics that
use zero masks into a single shuffle.
This is an implementation of that suggestion.
Differential Revision: http://reviews.llvm.org/D8567
llvm-svn: 233110
This caused PR23008, compiles failing with: "Use still stuck around after Def is
destroyed: %.sroa.speculated"
Also reverting follow-up r233064.
llvm-svn: 233105
It is possible to have code that converts from integer to float, performs operations then converts back, and the result is provably the same as if integers were used.
This can come from different sources, but the most obvious is a helper function that uses floats but the arguments given at an inlined callsites are integers.
This pass considers all integers requiring a bitwidth less than or equal to the bitwidth of the mantissa of a floating point type (23 for floats, 52 for doubles) as exactly representable in floating point.
To reduce the risk of harming efficient code, the pass only attempts to perform complete removal of inttofp/fptoint operations, not just move them around.
llvm-svn: 233062
Continue to simplify the `DIDescriptor` subclasses, so that they behave
more like raw pointers. Remove `getRaw()`, replace it with an
overloaded `get()`, and overload the arrow and cast operators. Two
testcases started to crash on the arrow operators with this change
because of `scope:` references that weren't real scopes. I fixed them.
Soon I'll add verifier checks for them too.
This also adds explicit dereference operators. Previously, the builtin
dereference against `operator MDNode *()` would have worked, but now the
builtins are ambiguous.
llvm-svn: 233030
strchr("123!", C) != nullptr is a common pattern to check if C is one
of 1, 2, 3 or !. If the largest element of the string is smaller than
the target's register size we can easily create a bitfield and just
do a simple test for set membership.
int foo(char C) { return strchr("123!", C) != nullptr; } now becomes
cmpl $64, %edi ## range check
sbbb %al, %al
movabsq $0xE000200000001, %rcx
btq %rdi, %rcx ## bit test
sbbb %cl, %cl
andb %al, %cl ## and the two conditions
andb $1, %cl
movzbl %cl, %eax ## returning an int
ret
(imho the backend should expand this into a series of branches, but
that's a different story)
The code is currently limited to bit fields that fit in a register, so
usually 64 or 32 bits. Sadly, this misses anything using alpha chars
or {}. This could be fixed by just emitting a i128 bit field, but that
can generate really ugly code so we have to find a better way. To some
degree this is also recreating switch lowering logic, but we can't
simply emit a switch instruction and thus change the CFG within
instcombine.
llvm-svn: 232902
r216771 introduced a change to MemoryDependenceAnalysis that allowed it
to reason about acquire/release operations. However, this change does
not ensure that the acquire/release operations pair. Unfortunately,
this leads to miscompiles as we won't see an acquire load as properly
memory effecting. This largely reverts r216771.
This fixes PR22708.
llvm-svn: 232889
vperm2* intrinsics are just shuffles.
In a few special cases, they're not even shuffles.
Optimizing intrinsics in InstCombine is better than
handling this in the front-end for at least two reasons:
1. Optimizing custom-written SSE intrinsic code at -O0 makes vector coders
really angry (and so I have regrets about some patches from last week).
2. Doing mask conversion logic in header files is hard to write and
subsequently read.
There are a couple of TODOs in this patch to complete this optimization.
Differential Revision: http://reviews.llvm.org/D8486
llvm-svn: 232852
When estimating SROA savings, we want to see if an address is derived
off an alloca in the caller. For store instructions, operand 1 is the
address operand, but the current code uses operand 0. Use
getPointerOperand for loads and stores to fix this.
Patch by Easwaran Raman.
http://reviews.llvm.org/D8425
llvm-svn: 232827
Each use of the byte array uses a different alias. This makes the
backend less likely to reuse previously computed byte array addresses,
improving the security of the CFI mechanism based on this pass.
Differential Revision: http://reviews.llvm.org/D8455
llvm-svn: 232770
Also, add several entries to vectorizable functions table, and
corresponding tests. The table isn't complete, it'll be populated later.
Review: http://reviews.llvm.org/D8131
llvm-svn: 232531
Re-commit the test cases added in r232444. These now use
-irce-print-changed-loops and -irce-print-range-checks so they run
correctly on a without asserts build of llvm.
llvm-svn: 232452
I accidentally checked in two tests that used -debug-only -- these fail
on a release LLVM build. Temporarily delete these from the repo to keep
the bots green while I fix this locally.
llvm-svn: 232446
This change to IRCE gets it to recognize "half" range checks. Half
range checks are range checks that only either check if the index is
`slt` some positive integer ("length") or if the index is `sge` `0`.
The range solver does not try to be clever / aggressive about solving
half-range checks -- it transforms "I < L" to "0 <= I < L" and "0 <= I"
to "0 <= I < INT_SMAX". This is safe, but not always optimal.
llvm-svn: 232444
By default we want our gcov emission to stay 4.2 compatible, which
means we need to continue emit the exit block last by default. We add
an option to emit it before the body for users that need it.
llvm-svn: 232438
As part of PR22777, fix testcases that fail the debug info verifier.
The changes fall into the following categories:
- Empty `filename:` fields in `MDFile`s. Compile units and some types
require non-empty filenames. A number of testcases have empty
filenames, probably due to hand-reduction of testcases.
- Not-quite empty arrays: `!{i32 0}`. This used to be equivalent in
the debug info schema to `!{}`. They cause problems for
`!MDSubroutineType`'s `types:` array, since it requires all operands
to be valid types. (Note that `!{null}` is the correct type array
for functions that take no arguments and return `void`.)
- Significantly bitrotted testcases. Nodes got left behind a few
upgrades ago because of missing or invalid tags.
llvm-svn: 232415
The problem here is the infamous one direction known safe. I was
hesitant to turn it off before b/c of the potential for regressions
without an actual bug from users hitting the problem. This is that bug ;
).
The main performance impact of having known safe in both directions is
that often times it is very difficult to find two releases without a use
in-between them since we are so conservative with determining potential
uses. The one direction known safe gets around that problem by taking
advantage of many situations where we have two retains in a row,
allowing us to avoid that problem. That being said, the one direction
known safe is unsafe. Consider the following situation:
retain(x)
retain(x)
call(x)
call(x)
release(x)
Then we know the following about the reference count of x:
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
retain(x)
// rc(x) == N+2
call A(x)
call B(x)
// rc(x) >= 1 (since we can not release a deallocated pointer).
release(x)
// rc(x) >= 0
That is all the information that we can know statically. That means that
we know that A(x), B(x) together can release (x) at most N+1 times. Lets
say that we remove the inner retain, release pair.
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
call A(x)
call B(x)
// rc(x) >= 1
release(x)
// rc(x) >= 0
We knew before that A(x), B(x) could release x up to N+1 times meaning
that rc(x) may be zero at the release(x). That is not safe. On the other
hand, consider the following situation where we have a must use of
release(x) that x must be kept alive for after the release(x)**. Then we
know that:
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
retain(x)
// rc(x) == N+2
call A(x)
call B(x)
// rc(x) >= 2 (since we know that we are going to release x and that that release can not be the last use of x).
release(x)
// rc(x) >= 1 (since we can not deallocate the pointer since we have a must use after x).
…
// rc(x) >= 1
use(x)
Thus we know that statically the calls to A(x), B(x) can together only
release rc(x) N times. Thus if we remove the inner retain, release pair:
// rc(x) == N (for some N).
retain(x)
// rc(x) == N+1
call A(x)
call B(x)
// rc(x) >= 1
…
// rc(x) >= 1
use(x)
We are still safe unless in the final … there are unbalanced retains,
releases which would have caused the program to blow up anyways even
before optimization occurred. The simplest form of must use is an
additional release that has not been paired up with any retain (if we
had paired the release with a retain and removed it we would not have
the additional use). This fits nicely into the ARC framework since
basically what you do is say that given any nested releases regardless
of what is in between, the inner release is known safe. This enables us to get
back the lost performance.
<rdar://problem/19023795>
llvm-svn: 232351
Verify that debug info intrinsic arguments are valid. (These checks
will not recurse through the full debug info graph, so they don't need
to be cordoned of in `DebugInfoVerifier`.)
With those checks in place, changing the `DbgIntrinsicInst` accessors to
downcast to `MDLocalVariable` and `MDExpression` is natural (added isa
specializations in `Metadata.h` to support this).
Added tests to `test/Verifier` for the new -verify checks, and fixed the
debug info in all the in-tree tests.
If you have out-of-tree testcases that have started to fail to -verify,
hopefully the verify checks are helpful. The most likely problem is
that the expression argument is `!{}` (instead of `!MDExpression()`).
llvm-svn: 232296
Summary: This is a first step toward getting proper support for aggregate loads and stores.
Test Plan: Added unittests
Reviewers: reames, chandlerc
Reviewed By: chandlerc
Subscribers: majnemer, joker.eph, chandlerc, llvm-commits
Differential Revision: http://reviews.llvm.org/D7780
Patch by Amaury Sechet
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 232284
The linker on that platform may re-order symbols or strip dead symbols, which
will break bit set checks. Avoid this by hiding the symbols from the linker.
llvm-svn: 232235
This reapplies the patch previously committed at revision 232190. This was
reverted at revision 232196 as it caused test failures in tests that did not
expect operands to be commuted. I have made the tests more resilient to
reassociation in revision 232206.
llvm-svn: 232209
As a follow-up to r232200, add an `-instcombine` to canonicalize scalar
allocations to `i32 1`. Since r232200, `iX 1` (for X != 32) are only
created by RAUWs, so this shouldn't fire too often. Nevertheless, it's
a cheap check and a nice cleanup.
llvm-svn: 232202
Write the `alloca` array size explicitly when it's non-canonical.
Previously, if the array size was `iX 1` (where X is not 32), the type
would mutate to `i32` when round-tripping through assembly.
The testcase I added fails in `verify-uselistorder` (as well as
`FileCheck`), since the use-lists for `i32 1` and `i64 1` change.
(Manman Ren came across this when running `verify-uselistorder` on some
non-trivial, optimized code as part of PR5680.)
The type mutation started with r104911, which allowed array sizes to be
something other than an `i32`. Starting with r204945, we
"canonicalized" to `i64` on 64-bit platforms -- and then on every
round-trip through assembly, mutated back to `i32`.
I bundled a fixup for `-instcombine` to avoid r204945 on scalar
allocations. (There wasn't a clean way to sequence this into two
commits, since the assembly change on its own caused testcase churn, and
the `-instcombine` change can't be tested without the assembly changes.)
An obvious alternative fix -- change `AllocaInst::AllocaInst()`,
`AsmWriter` and `LLParser` to treat `intptr_t` as the canonical type for
scalar allocations -- was rejected out of hand, since this required
teaching them each about the data layout.
A follow-up commit will add an `-instcombine` to canonicalize the scalar
allocation array size to `i32 1` rather than leaving `iX 1` alone.
rdar://problem/20075773
llvm-svn: 232200
This patch adds initial support for vector instructions to the reassociation
pass. It enables most parts of the pass to work with vectors but to keep the
size of the patch small, optimization of Xor trees, canonicalization of
negative constants and converting shifts to muls, etc., have been left out.
This will be handled in later patches.
The patch is based on an initial patch by Chad Rosier.
Differential Revision: http://reviews.llvm.org/D7566
llvm-svn: 232190
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Constant folding for shift IR instructions ignores all bits above 32 of
second argument (shift amount).
Because of that, some undef results are not recognized and APInt can
raise an assert failure if second argument has more than 64 bits.
Patch by Paweł Bylica!
Differential Revision: http://reviews.llvm.org/D7701
llvm-svn: 232176
It's firstly committed at r231630, and reverted at r231635.
Function pass InstructionSimplifier is inserted as barrier to
make sure loop unroll pass won't affect on LICM pass.
llvm-svn: 232011
The CallGraphNode function "addCalledFunction()" asserts that edges are not to intrinsics.
This patch makes sure that the Inliner does not add such an edge to the callgraph.
Fix for clang crash by assertion: https://llvm.org/bugs/show_bug.cgi?id=22857
Differential Revision: http://reviews.llvm.org/D8231
llvm-svn: 231927
Given that large parts of inst combine is restricted to instructions which have one use, getting rid of a use on the condition can help the effectiveness of the optimizer. Also, it allows the condition to potentially be deleted by instcombine rather than waiting for another pass.
I noticed this completely by accident in another test case. It's not anything that actually came from a real workload.
p.s. We should probably do the same thing for switch instructions.
Differential Revision: http://reviews.llvm.org/D8220
llvm-svn: 231881
Sanjoy Das