This also reverts:
- r372778: [libc++] Implement LWG 3158
- r372782: [libc++] Try fixing tests that fail on GCC 5 and older
- r372787: Purge mentions of GCC 4 from the test suite
Reason: the change breaks compilation of LLVM with libc++, for details see
http://lists.llvm.org/pipermail/libcxx-dev/2019-September/000599.html
llvm-svn: 372832
This overload was left over from an operator new that was removed in
r123027. Fix it to match another operator new that was added in r248453.
llvm-svn: 372828
That flag was introduced in Clang 6.0, so this made the test fail
with Clang <= 5.0. As it only influences linking builtin libraries
like -m which aren't relevant for this test, we can drop this flag.
llvm-svn: 372827
I think we should be able to use shl instead of sshl and ushl for
positive constant shift values, unless I am missing something.
We already have the machinery in place to ensure we only replace
nodes, if the shift value is positive and <= the element width.
This is a generalization of an earlier patch rL372565.
Reviewers: t.p.northover, samparker, dmgreen, anemet
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D67955
llvm-svn: 372824
In top level expressions, we don't have a m_source_code and we don't need to change
the source bounds (as no wrapping happend there). Fixes the test on the
sanitizer bot.
llvm-svn: 372817
-B is ignored for GNU objcopy compatibility after D67215/r371914.
* Delete mentions of -B from input-output-target.test - we have enough -B tests.
* Merge binary-input-with-arch.test into binary-output-target.test.
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D67693
llvm-svn: 372809
D64906 allows PT_LOAD to have overlapping p_offset ranges. In the
default R RX RW RW layout + -z noseparate-code case, we do not tail pad
segments when transiting to another segment. This can save at most
3*maxPageSize bytes.
a) Before D64906, we tail pad R, RX and the first RW.
b) With -z separate-code, we tail pad R and RX, but not the first RW (RELRO).
In some cases, b) saves one file page. In some cases, b) wastes one
virtual memory page. The waste is a concern on Fuchsia. Because it uses
compressed binaries, it doesn't benefit from the saved file page.
This patch adds -z separate-loadable-segments to restore the behavior before
D64906. It can affect section addresses and can thus be used as a
debugging mechanism (see PR43214 and ld.so partition bug in
crbug.com/998712).
Reviewed By: jakehehrlich, ruiu
Differential Revision: https://reviews.llvm.org/D67481
llvm-svn: 372807
ResetOutputFileHandle() isn't being used by anything. Also it's using
FILE*, which is something we should be doing less of. Remove it.
Patch by: Lawrence D'Anna
Differential revision: https://reviews.llvm.org/D68001
llvm-svn: 372800
Summary:
When support for ThinLTO was first added to lld, the options that
control it were prefixed with --plugin-opt= for compatibility with
an existing implementation as a linker plugin. This change enables
shorter versions of the options to be used, as follows:
New Existing
-thinlto-emit-imports-files --plugin-opt=thinlto-emit-imports-files
-thinlto-index-only --plugin-opt=thinlto-index-only
-thinlto-index-only= --plugin-opt=thinlto-index-only=
-thinlto-object-suffix-replace= --plugin-opt=thinlto-object-suffix-replace=
-thinlto-prefix-replace= --plugin-opt=thinlto-prefix-replace=
-lto-obj-path= --plugin-opt=obj-path=
The options with the --plugin-opt= prefix have been retained as aliases
for the shorter variants so that they continue to be accepted.
Reviewers: tejohnson, ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, MaskRay, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67782
llvm-svn: 372798
The testing documentation appears to be from an era when the only kind
of tests were the lldbsuite python tests. This patch adds a short
description of the unittests and LIT tests and how to run them.
Patch by: Lawrence D'Anna
Differential revision: https://reviews.llvm.org/D67943
llvm-svn: 372797
This test streamlines our use of variables that are expected by
Makefile.rules throughout the test suite. Mostly it replaced
potentially dangerous overrides and updates of variables like CFLAGS
with safe assignments to variables reserved for this purpose like
CFLAGS_EXTRAS.
Differential Revision: https://reviews.llvm.org/D67984
llvm-svn: 372795
The custom target for the system debugserver has no install target, so
we need to remove it from the LLVM_DISTRIBUTION_COMPONENTS list.
llvm-svn: 372793
Summary:
Instead of having different v128.load and v128.store instructions for
each MVT, just have one of each that is reused in all the
patterns. Also removes the HasSIMD128 predicate where accompanied by
HasUnimplementedSIMD128, since the latter implies the former.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67930
llvm-svn: 372792
Mimics the changes in r372209 to handle the change of quotes in
r372226. Probably isn't sufficient for windows, but unbreaks the cmake
flag at least.
llvm-svn: 372791
r366433 broke support for the system debugserver. Although the change
was well-intended, it (presumably) unintentionally removed the logic to
copy over the debugserver. As a result, even with
LLDB_USE_SYSTEM_DEBUGSERVER enabled, we ended up building, signing and
using the just-built debugserver.
This patch partially recovers the old behavior: when
LLDB_USE_SYSTEM_DEBUGSERVER is set we don't build debugserver and just
copy over the system one.
Differential revision: https://reviews.llvm.org/D67991
llvm-svn: 372786
Currently, if an array element type size is 0, the number of
array elements will be set to 0, regardless of what user
specified. This implementation is done in the beginning where
BTF is mostly used to calculate the member offset.
For example,
struct s {};
struct s1 {
int b;
struct s a[2];
};
struct s1 s1;
The BTF will have struct "s1" member "a" with element count 0.
Now BTF types are used for compile-once and run-everywhere
relocations and we need more precise type representation
for type comparison. Andrii reported the issue as there
are differences between original structure and BTF-generated
structure.
This patch made the change to correctly assign "2"
as the number elements of member "a".
Some dead codes related to ElemSize compuation are also removed.
Differential Revision: https://reviews.llvm.org/D67979
llvm-svn: 372785
Second attempt: Now with ';' -> '|' replacement.
On some platforms, certain runtimes are not supported. For runtimes builds of
those platforms it would be nice if we could disable certain runtimes (ie
libunwind on Windows).
Differential Revision: https://reviews.llvm.org/D67195
llvm-svn: 372784
When /DISCARD/ is used on an input section, that input section may have
a .ARM.exidx metadata section that depends on it. As the discard handling
comes after the .ARM.exidx synthetic section is created we need to make
sure that we account for the case where the .ARM.exidx output section
should be removed because there are no more live input sections.
Differential Revision: https://reviews.llvm.org/D67848
llvm-svn: 372781
Summary: As suggested by @ldionne in D66178, this patch removes C++03 variadics //only//. Following patches will apply more updates.
Reviewers: ldionne, EricWF, mclow.lists
Subscribers: christof, dexonsmith, libcxx-commits, ldionne
Tags: #libc
Differential Revision: https://reviews.llvm.org/D67675
llvm-svn: 372780
Summary:
LWG 3158 marks the allocator_arg_t constructor of std::tuple as
conditionnally explicit based on whether the default constructors
of the tuple's members are explicitly default constructible.
Reviewers: EricWF, mclow.lists
Subscribers: christof, jkorous, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D65232
llvm-svn: 372778
Summary:
LWG2510 makes tag types like allocator_arg_t explicitly default
constructible instead of implicitly default constructible. It also
makes the constructors for std::pair and std::tuple conditionally
explicit based on the explicit-ness of the default constructibility
for the pair/tuple's elements.
Reviewers: mclow.lists, EricWF
Subscribers: christof, jkorous, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D65161
llvm-svn: 372777
Adrian added a sanity check to the socket tests to ensure the $TMPDIR is
not too long for a socket. While this is great for diagnosing the
problem it doesn't really solve the problem for environment where you
have no control over that variable such as in CI. I propose to just skip
the test in that case similar to what we do for tests that rely on
targets that are not currently build, etc.
Differential revision: https://reviews.llvm.org/D67972
llvm-svn: 372774
If we generate the gc.relocate, and then later prove two arguments to the statepoint are equivalent, we should canonicalize the gc.relocate to the form we would have produced if this had been known before rewriting.
llvm-svn: 372771
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
For
```
#include <cassert>
char* test(char& base, signed long offset) {
__builtin_assume(offset < 0);
return &base + offset;
}
```
We produce
https://godbolt.org/z/r40U47
and again those two icmp's can be merged:
```
Name: 0
Pre: C != 0
%adjusted = add i8 %base, C
%not_null = icmp ne i8 %adjusted, 0
%no_underflow = icmp ult i8 %adjusted, %base
%r = and i1 %not_null, %no_underflow
=>
%neg_offset = sub i8 0, C
%r = icmp ugt i8 %base, %neg_offset
```
https://rise4fun.com/Alive/ALaphttps://rise4fun.com/Alive/slnN
There are 3 other variants of this pattern,
i believe they all will go into InstSimplify.
https://bugs.llvm.org/show_bug.cgi?id=43259
Reviewers: spatel, xbolva00, nikic
Reviewed By: spatel
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67849
llvm-svn: 372768
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
This pattern isn't exactly what we get there
(strict vs. non-strict predicate), but this pattern does not
require known-bits analysis, so it is best to handle it first.
```
Name: 0
%adjusted = add i8 %base, %offset
%not_null = icmp ne i8 %adjusted, 0
%no_underflow = icmp ule i8 %adjusted, %base
%r = and i1 %not_null, %no_underflow
=>
%neg_offset = sub i8 0, %offset
%r = icmp ugt i8 %base, %neg_offset
```
https://rise4fun.com/Alive/knp
There are 3 other variants of this pattern,
they all will go into InstSimplify:
https://rise4fun.com/Alive/bIDZhttps://bugs.llvm.org/show_bug.cgi?id=43259
Reviewers: spatel, xbolva00, nikic
Reviewed By: spatel
Subscribers: hiraditya, majnemer, vsk, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67846
llvm-svn: 372767
Ilya Biryukov