Currently the SCEVExpander tries to re-use existing casts, even if they
are not exactly at the insertion point it was asked to create the cast.
To do so in some case, it creates a new cast at the insertion point and
updates all users to use the new cast.
This behavior is problematic, because it changes the IR outside of the
instructions created during the expansion. Therefore we cannot
completely undo all changes made during expansion.
This re-use should be only an extra optimization, so only using the new
cast in the expanded instructions should not be a correctness issue.
There are many cases equivalent instructions are created during
expansion.
This patch also adjusts findInsertPointAfter to skip instructions
inserted during expansion. This enables re-using existing casts without
the renaming any uses, by picking a better insertion point.
Reviewed By: efriedma, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84399
querying getSCEV() for incomplete phis leads to wrong cache value in `ExprToIVMap`,
because incomplete phis may be simplified to same value before get SCEV expression.
Reviewed By: lebedev.ri, mkazantsev
Differential Revision: https://reviews.llvm.org/D77560
The test is quite frafile, as the check lines match IR numbers and it is
not obvious why only a very small subset is checked.
Re-generate check lines, so further changes are more obvious.
The legacy pass was called "loop-reduce".
This lowers the number of check-llvm failures under NPM by 83.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D82925
Summary:
In SCEVExpander FactorOutConstant(), when GEP indexing into/over scalable vector,
it is legal for the 'Factor' in a MulExpr to be the size of a scalable vector
instead of a compile-time constant.
Current upstream crash with the test attached.
Reviewers: efriedma, sdesmalen, sanjoy.google, mkazantsev
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80973
This patch adds a new TTI hook to allow targets to tell LSR that
a chain including some instruction is already profitable and
should not be optimized. This patch also adds an implementation
of this TTI hook for ARM so LSR doesn't optimize chains that include
the VCTP intrinsic.
Differential Revision: https://reviews.llvm.org/D79418
greater-than-sign is not a BRE special character.
POSIX.1-2017 XBD Section 9.3.2 indicates that the interpretation of `\>`
is undefined. This patch replaces the pattern.
llvm-svn: 363828
Second functional change following on from rL362687. Pass the
NoWrapFlags from the MulExpr to InsertBinop when we're generating a
shl or mul.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363540
InsertBinop now accepts NoWrapFlags, so pass them through when
expanding a simple add expression.
This is the first re-commit of the functional changes from rL362687,
which was previously reverted.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363364
If the given SCEVExpr has no (un)signed flags attached to it, transfer
these to the resulting instruction or use them to find an existing
instruction.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 362687
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
Summary:
Currently we express umin as `~umax(~x, ~y)`. However, this becomes
a problem for operands in non-integral pointer spaces, because `~x`
is not something we can compute for `x` non-integral. However, since
comparisons are generally still allowed, we are actually able to
express `umin(x, y)` directly as long as we don't try to express is
as a umax. Support this by adding an explicit umin/smin representation
to SCEV. We do this by factoring the existing getUMax/getSMax functions
into a new function that does all four. The previous two functions were
largely identical.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D50167
llvm-svn: 360159
In some circumstances we can end up with setup costs that are very complex to
compute, even though the scevs are not very complex to create. This can also
lead to setupcosts that are calculated to be exactly -1, which LSR treats as an
invalid cost. This patch puts a limit on the recursion depth for setup cost to
prevent them taking too long.
Thanks to @reames for the report and test case.
Differential Revision: https://reviews.llvm.org/D60944
llvm-svn: 358958
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
If LSR split critical edge during rewriting phi operands and
phi node has other pending fixup operands, we need to
update those pending fixups. Otherwise formulae will not be
implemented completely and some instructions will not be eliminated.
llvm.org/PR41445
Differential Revision: https://reviews.llvm.org/D60645
Patch by: Denis Bakhvalov <denis.bakhvalov@intel.com>
llvm-svn: 358457
For the attached test case, unchecked addition of immediate starts and
ends overflows, as they can be arbitrary i64 constants.
Proof: https://rise4fun.com/Alive/Plqc
Reviewers: qcolombet, gilr, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59218
llvm-svn: 357217
Summary:
This adds a BranchFusion feature to replace the usage of the MacroFusion
for AMD CPUs.
See D59688 for context.
Reviewers: andreadb, lebedev.ri
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59872
llvm-svn: 357171
We are adding a sign extended IR value to an int64_t, which can cause
signed overflows, as in the attached test case, where we have a formula
with BaseOffset = -1 and a constant with numeric_limits<int64_t>::min().
If the addition would overflow, skip the simplification for this
formula. Note that the target triple is required to trigger the failure.
Reviewers: qcolombet, gilr, kparzysz, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59211
llvm-svn: 356256
In some loops, we end up generating loop induction variables that look like:
{(-1 * (zext i16 (%i0 * %i1) to i32))<nsw>,+,1}
As opposed to the simpler:
{(zext i16 (%i0 * %i1) to i32),+,-1}
i.e we count up from -limit to 0, not the simpler counting down from limit to
0. This is because the scores, as LSR calculates them, are the same and the
second is filtered in place of the first. We end up with a redundant SUB from 0
in the code.
This patch tries to make the calculation of the setup cost a little more
thoroughly, recursing into the scev members to better approximate the setup
required. The cost function for comparing LSR costs is:
return std::tie(C1.NumRegs, C1.AddRecCost, C1.NumIVMuls, C1.NumBaseAdds,
C1.ScaleCost, C1.ImmCost, C1.SetupCost) <
std::tie(C2.NumRegs, C2.AddRecCost, C2.NumIVMuls, C2.NumBaseAdds,
C2.ScaleCost, C2.ImmCost, C2.SetupCost);
So this will only alter results if none of the other variables turn out to be
different.
Differential Revision: https://reviews.llvm.org/D58770
llvm-svn: 355597
Modify GenerateConstantOffsetsImpl to create offsets that can be used
by indexed addressing modes. If formulae can be generated which
result in the constant offset being the same size as the recurrence,
we can generate a pre-indexed access. This allows the pointer to be
updated via the single pre-indexed access so that (hopefully) no
add/subs are required to update it for the next iteration. For small
cores, this can significantly improve performance DSP-like loops.
Differential Revision: https://reviews.llvm.org/D55373
llvm-svn: 353403
When LSR first adds SCEVs to BaseRegs, it only does it if `isZero()` has
returned false. In the end, in invocation of `InsertFormula`, it asserts that
all values there are still not zero constants. However between these two
points, it makes some transformations, in particular extends them to wider
type.
SCEV does not give us guarantee that if `S` is not a constant zero, then
`sext(S)` is also not a constant zero. It might have missed some optimizing
transforms when it was calculating `S` and then made them when it took `sext`.
For example, it may happen if previously optimizing transforms were limited
by depth or somehow else.
This patch adds a bailout when we may end up with a zero SCEV after extension.
Differential Revision: https://reviews.llvm.org/D57565
Reviewed By: samparker
llvm-svn: 353136
Currently SCEV attempts to limit transformations so that they do not work with
big SCEVs (that may take almost infinite compile time). But for this, it uses heuristics
such as recursion depth and number of operands, which do not give us a guarantee
that we don't actually have big SCEVs. This situation is still possible, though it is not
likely to happen. However, the bug PR33494 showed a bunch of simple corner case
tests where we still produce huge SCEVs, even not reaching big recursion depth etc.
This patch introduces a concept of 'huge' SCEVs. A SCEV is huge if its expression
size (intoduced in D35989) exceeds some threshold value. We prohibit optimizing
transformations if any of SCEVs we are dealing with is huge. This gives us a reliable
check that we don't spend too much time working with them.
As the next step, we can possibly get rid of old limiting mechanisms, such as recursion
depth thresholds.
Differential Revision: https://reviews.llvm.org/D35990
Reviewed By: reames
llvm-svn: 352728
LSR reassociates constants as unfolded offsets when the constants fit as
immediate add operands, which currently prevents such constants from being
combined later with loop invariant registers.
This patch modifies GenerateCombinations() to generate a second formula which
includes the unfolded offset in the combined loop-invariant register.
This commit fixes a bug in the original patch (committed at r345114, reverted
at r345123).
Differential Revision: https://reviews.llvm.org/D51861
llvm-svn: 346390
LSR reassociates constants as unfolded offsets when the constants fit as
immediate add operands, which currently prevents such constants from being
combined later with loop invariant registers.
This patch modifies GenerateCombinations() to generate a second formula which
includes the unfolded offset in the combined loop-invariant register.
Differential Revision: https://reviews.llvm.org/D51861
llvm-svn: 345114
LSR reassociates small constants that fit into add immediate operands as
unfolded offset. Since unfolded offset is not combined with loop-invariant
registers, LSR does not consider solutions that bump invariant registers by
these constants outside the loop.
llvm-svn: 341835
Summary:
An alternative to D48597.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=37936 | PR37936 ]].
The problem is as follows:
1. `indvars` marks `%dec` as `NUW`.
2. `loop-instsimplify` runs `instsimplify`, which constant-folds `%dec` to -1 (D47908)
3. `loop-reduce` tries to do some further modification, but crashes
with an type assertion in cast, because `%dec` is no longer an `Instruction`,
If the runline is split into two, i.e. you first run `-indvars -loop-instsimplify`,
store that into a file, and then run `-loop-reduce`, there is no crash.
So it looks like the problem is due to `-loop-instsimplify` not discarding SCEV.
But in this case we can just not crash if it's not an `Instruction`.
This is just a local fix, unlike D48597, so there may very well be other problems.
Reviewers: mkazantsev, uabelho, sanjoy, silviu.baranga, wmi
Reviewed By: mkazantsev
Subscribers: evstupac, javed.absar, spatel, llvm-commits
Differential Revision: https://reviews.llvm.org/D48599
llvm-svn: 335950
Summary:
Two utils methods have essentially the same functionality. This is an attempt to merge them into one.
1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred
2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor
Prior to the patch:
1. MergeBasicBlockIntoOnlyPred
Updates either DomTree or DeferredDominance
Moves all instructions from Pred to BB, deletes Pred
Asserts BB has single predecessor
If address was taken, replace the block address with constant 1 (?)
2. MergeBlockIntoPredecessor
Updates DomTree, LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
After the patch:
Method 2. MergeBlockIntoPredecessor is attempting to become the new default:
Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
Uses of MergeBasicBlockIntoOnlyPred that need to be replaced:
1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp
Updated in this patch. No challenges.
2. lib/CodeGen/CodeGenPrepare.cpp
Updated in this patch.
i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation.
ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks
Some interesting aspects:
- Since Pred is not deleted (BB is), the entry block does not need updating.
- The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred.
- isMergingEmptyBlockProfitable assumes BB is the one to be deleted.
- eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead.
- adding some test owner as subscribers for the interesting tests modified:
test/CodeGen/X86/avx-cmp.ll
test/CodeGen/AMDGPU/nested-loop-conditions.ll
test/CodeGen/AMDGPU/si-annotate-cf.ll
test/CodeGen/X86/hoist-spill.ll
test/CodeGen/X86/2006-11-17-IllegalMove.ll
3. lib/Transforms/Scalar/JumpThreading.cpp
Not covered in this patch. It is the only use case using the DeferredDominance.
I would defer to Brian Rzycki to make this replacement.
Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar
Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D48202
llvm-svn: 335183
Florian Hahn