This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
Teach LLDB that different shells have different characters they are sensitive to, and use that knowledge to do shell-aware escaping
This helps solve a class of problems on OS X where LLDB would try to launch via sh, and run into problems if the command line being passed to the inferior contained such special markers (hint: the shell would error out and we'd fail to launch)
This makes those launch scenarios work transparently via shell expansion
Slightly improve the error message when this kind of failure occurs to at least suggest that the user try going through 'process launch' directly
Fixes rdar://problem/22749408
llvm-svn: 265357
The software breakpoint definitions for mips32 should have been included in my
recent patch that moved the software breakpoint definitions into the base platform
class.
llvm-svn: 262021
This patch aims to reduce the code duplication among all of the platforms in GetSoftwareBreakpointTrapOpcode by pushing all common code into the Platform base class.
Differential Revision: http://reviews.llvm.org/D17395
llvm-svn: 261536
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
This change introduce 3 different working mode for Platform::LoadImage
depending on the file specs specified.
* If only a remote file is specified then the remote file is loaded on
the target (same behavior as before)
* If only a local file is specified then the local file is installed to
the current working directory and then loaded from there.
* If both local and remote file is specified then the local file is
installed to the specified location and then loaded from there.
The same options are exposed on the SB API with a new method LoadImage
method while the old signature presers its meaning.
On the command line the installation of the shared library can be specified
with the "--install" option of "process load".
Differential revision: http://reviews.llvm.org/D15152
llvm-svn: 255014
On android the symbols exposed by libdl (dlopen, dlclose, dlerror)
prefixed by "__dl_". This change moves the handling of process
load/unload to the platform object and override it for android to
handle the special prefix.
Differential revision: http://reviews.llvm.org/D11465
llvm-svn: 254504
On UNIX (but not Darwin) the username needs to be respected when creating a
temporary module directory, so that different users don't pollute each others'
module caches.
llvm-svn: 251340
* ArchSpec::MergeFrom() would erroneously promote an unspecified
unknown to a specified unknown when both the ArchSpec and the merged
in ArchSpec were both unspecified unknowns. This no longer happens,
which fixes issues with global module cache lookup in some
situations.
* Added ArchSpec::DumpTriple(Stream&) that now properly prints
unspecified unknowns as '*' and specified unknows as 'unknown'.
This makes it trivial to tell the difference between the two.
Converted printing code over ot using DumpTriple() rather than
building from scratch.
* Fixed up a couple places that were not guaranteeing that an
unspecified unknown was recorded as such.
llvm-svn: 250253
* Change Module::MatchesModuleSpec to return true in case the file spec
in the specified module spec matches with the platform file spec, but
not with the local file spec
* Change the module_resolver used when resolving a remote shared module
to always set the platform file spec to the file spec requested
Differential revision: http://reviews.llvm.org/D12601
llvm-svn: 246852
This will do things like,
given mylibrary,
return
libmylibrary.dylib on OSX
mylibrary.dll on Windows
and so on for other platforms
It is currently implemented for Windows, Darwin, and Linux. Other platforms should fill in accordingly
llvm-svn: 246131
On android .oat files (compiled java code) don't have symbol
information but on SDK 23+ it can be generated by the oatdump tool
(based on the dex information).
This CL adds logic to download this information and store it in the
module cache.
Differential revision: http://reviews.llvm.org/D11936
llvm-svn: 244738
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
This is a resubmit of r241672, after it was reverted due to build failueres on non-linux
platforms.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241796
platform-specific symbols that are not implemented on OS X.
The build error that caused this is
Undefined symbols for architecture x86_64:
"lldb_private::NativeProcessProtocol::Attach(unsigned long long, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::AttachToProcess(unsigned long long) in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
"lldb_private::NativeProcessProtocol::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::LaunchProcess() in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 241688
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241672
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Summary:
GetCurrentDirectory() returns the number of characters copied; 0 is a failure, not a success.
Add implementation for chdir().
Reviewers: zturner
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9300
llvm-svn: 237162
Converts the MAP_PRIVATE and MAP_ANON options to the target platform constants
(on which the call runs) rather than using those of the compiled host.
Test Plan:
Run test suite, the following tests requiring memory allocation / JIT support
begin passing when running mac -> linux:
Test11588.py
TestAnonymous.py
TestBreakpointConditions.py
TestCPPStaticMethods.py
TestCStrings.py
TestCallStdStringFunction.py
TestDataFormatterCpp.py
TestDataFormatterStdList.py
TestExprDoesntBlock.py
TestExprHelpExamples.py
TestFunctionTypes.py
TestPrintfAfterUp.py
TestSBValuePersist.py
TestSetValues.py
Differential Revision: http://reviews.llvm.org/D9511
llvm-svn: 236933
Previously the remote module sepcification was fetched only from the
remote platform. With this CL if we have a remote process then we ask it
if it have any information from a given module. It is required because
on android the dynamic linker only reports the name of the SO file and
the platform can't always find it without a full path (the process can
do it based on /proc/<pid>/maps).
Differential revision: http://reviews.llvm.org/D8547
llvm-svn: 233061
- Add Host::GlobArguments() to perform local-globbing
I implemented this on OSX and Windows in terms of argdumper (Windows implementation is essentially the same as the OSX version + a change in binary name and some string magic)
Other platforms did not specifically chime in, so I left it unimplemented for them for the time being. Please feel free to fill in the blanks
- Add Platform::GlobArguments() to support remote-globbing
For now, no feature change here - but now we have infrastructure to help GDBRemote targets to support globbing - and patches to that effect will follow
No visible feature change
llvm-svn: 230065
When launching argdumper, there are a few problems with the
current logic. First, on Windows, the file is called
argdumper.exe, not argdumper. Second, Windows paths have
backslashes in them, and JSON treats <backslash><char> as an
escape sequence. To fix the second problem, on Windows we
convert backslashes to forward slashes, since backslash isn't
a valid filename character anyway this shouldn't be a problem.
llvm-svn: 229784
Summary:
This does not fix any outstanding issue that I know of, but there is no reason these files should
_not_ have CloseOnExec.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7694
llvm-svn: 229506
Platform holds a smart pointer to each platform object created in a
static variable what cause the platform destructors called only on
program exit when other static variables are not availables. With this
change the destructors are called on lldb_private::Terminate()
+ Fix DebuggerRefCount handling in ScriptInterpreterPython
Differential Revision: http://reviews.llvm.org/D7590
llvm-svn: 228944
Make sure the selected platform is always used
Make sure that the host uses the connect://hostname to connect to both
the lldb-platform and the lldb-gdbserver rather than what the platform
reports as the hostname of the lldb-gdbserver
Make sure that lldb-platform uses the IP address on it's connection
back to the host instead of the hostname that the host sends to it
when launching lldb-gdbserver with the remote host information
Tested on OSX and Linux
llvm-svn: 226712
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
Ulrich Weigand