Unpredicated copy of optionally-shifted immediate to SVE vector,
along with MOV-aliases.
This patch contains parsing and printing support for
cpy_imm8_opt_lsl_(i8|i16|i32|i64). This operand allows a signed value in
the range -128 to +127. For element widths of 16 bits or higher it may
also be a signed multiple of 256 in the range -32768 to +32512.
For element-width of 8 bits a range of -128 to 255 is accepted, since a copy
of a byte can be considered either signed/unsigned.
Note: This patch renames tryParseAddSubImm() -> tryParseImmWithOptionalShift()
and moves the behaviour of trying to shift a plain immediate by an allowed
shift-value to its addImmWithOptionalShiftOperands() method, so that the
parsing itself is generic and allows immediates from multiple shifted operands.
This is done because an immediate can be divisible by both shifted operands.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47309
llvm-svn: 333263
Previously, this pass would look at the (static) set returned by
getCallPreservedMask() and add those back as preserved in the case when
isSafeForNoCSROpt() returns false.
A problem is that a target may have to save some registers even when NoCSROpt
takes place. For instance, on SystemZ, the return register is needed upon
return from a function.
Furthermore, getCallPreservedMask() only includes the registers that the
target actually wishes to emit save/restore instructions for. This means that
subregs and (fully saved) superregs are missing.
This patch instead takes the (dynamic) set returned by target for the
function from determineCalleeSaves() and then adds sub/super regs to build
the set to be used when building the RegMask for the function.
Review: Quentin Colombet, Ulrich Weigand
https://reviews.llvm.org/D46315
llvm-svn: 333261
Summary:
Lower control flow did not correctly handle the case that a loop break
in if/else was on a condition that was not guaranteed to be masked by
exec. The first test kernel shows an example of this going wrong; after
exiting the loop, exec is all ones, even if it was not before the loop.
The fix is for lowering of if-break and else-break to insert an
S_AND_B64 to mask the break condition with exec. This commit also
includes the optimization of not inserting that S_AND_B64 if it is
obviously not needed because the break condition is the result of a
V_CMP in the same basic block.
V2: Addressed some review comments.
V3: Test fixes.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44046
Change-Id: I0fc56a01209a9e99d1d5c9b0ffd16f111caf200c
llvm-svn: 333258
Re-add the feature flag for invpcid, which was removed in r294561.
Add an intrinsic, which always uses a 32 bit integer as first argument,
while the instruction actually uses a 64 bit register in 64 bit mode
for the INVPCID_TYPE argument.
Reviewers: craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D47141
llvm-svn: 333255
Summary:
The AMDGPUMCInstLower class is not used outside AMDGPUMCInstLower.cpp,
so we don't need a header file.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47264
llvm-svn: 333254
The plan had always been to move towards using this rather than so much
in-pass simplification within the loop pipeline, but we never got around
to it.... until only a couple months after it was removed due to disuse.
=/
This commit is just a pure revert of the removal. I will add tests and
do some basic cleanup in follow-up commits. Then I'll wire it into the
loop pass pipeline.
Differential Revision: https://reviews.llvm.org/D47353
llvm-svn: 333250
We were making malformed XML on tests with ' in the name. Switch to
using saxutils to set all of our attributes, so it can handle quotes
etc correctly.
llvm-svn: 333249
Setting the "Debug Info Version" module flag makes it possible to pipe
synthetic debug info into llc, which is useful for testing backends.
llvm-svn: 333237
When a GEP with all zero indices is converted to bitcast, its DI wasn't
copied over to the newly created instruction. This patch fixes that bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47347
llvm-svn: 333235
Currently the iteration order of OnTheFlyManagers is not deterministic
between executions, which means some of test/Other/opt-*-pipeline.ll
tests fail non-deterministically if an additional on-the-fly manager is
added, as in D45330.
By using MapVector, we always iterate in the insertion order. As we are
not removing elements, there shouldn't be a performance hit, except that
we store an additional vector with the keys.
Reviewers: efriedma, chandlerc, pcc, jhenderson
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47317
llvm-svn: 333231
Currently RTDyldObjectLinkingLayer makes it hard to support
JITEventListeners. Which in turn means debugging and profiling JIT
generated code hard.
Supporting JITEventListeners at minimum requries a freed
callback (added).
As listeners expect the ObjectFile to be passed as well, an adaptor
between RTDyldObjectLinkingLayer and JITEventListeners would currently
need to also maintain ObjectFiles for all loaded modules. To make that
less awkward, extend the callbacks to pass the ObjectFile to both
Finalized and Freed callbacks. That requires extending the lifetime
of the object file when callbacks are present.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D44890
llvm-svn: 333227
If the nsw flag is used in the absolute value then it is undefined for INT_MIN. For all other value it will produce a positive number. So we can assume the result is positive.
This breaks some InstCombine abs/nabs combining tests because we simplify the second compare from known bits rather than as the whole pattern. Looks like we can probably fix it by adding a neg+abs/nabs combine to just swap the select operands. Need to check alive to make sure there are no corner cases.
Differential Revision: https://reviews.llvm.org/D47041
llvm-svn: 333226
Reassociation of math ops in some contexts (especially vector contexts)
has generally only been happening when the 'fast' FMF was set. This
enables reassoication when only the finer grained controls 'reassoc' and
'nsz' are set.
Differential Revision: https://reviews.llvm.org/D47335
llvm-svn: 333221
The existing code has three different ways to try to lower a 64-bit
immediate to the sequence ORR+MOVK. The result is messy: it misses
some possible sequences, and the order of the checks means we sometimes
emit two MOVKs when we only need one.
Instead, just use a simple loop to try all possible two-instruction
ORR+MOVK sequences.
Differential Revision: https://reviews.llvm.org/D47176
llvm-svn: 333218
Re-appply r333147, reverted in r333152 due to a pre-existing bug. As
D47308 has been merged in r333206, the OSX issue should now be
resolved.
In many cases JIT users will know in which module a symbol
resides. Avoiding to search other modules can be more efficient. It
also allows to handle duplicate symbol names between modules.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D44889
llvm-svn: 333215
Before printing the block reciprocal throughput, ensure that the floating point
number is always rounded the same way on every target.
No functional change intended.
llvm-svn: 333210
The lack of name mangling caused a unittest failure after r333147 (in
TestEagerIRCompilation), as OSX prefixes symbol names with '_'. The
lack of name mangling therefore leads to a NULL pointer being returned
and then called, hence the failure.
While it may look like it, this isn't an actual behavioral change, as
findSymbolIn() previously was not exposed externally, and essentially
dead code. Which explains why nobody noticed the issue previously.
Reviewers: lhames
Reviewed By: lhames
Subscribers: chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D47308
llvm-svn: 333206
Previously update_mca_test_checks worked entirely at "block" level where
a block is some sequence of lines delimited by at least one empty line.
This generally worked well, but could sometimes lead to excessive
repetition of check lines for various prefixes if some block was almost
identical between prefixes, but not quite (for example, due to a
different dispatch width in the otherwise identical summary views).
This new analyis attempts to split blocks further in the case where the
following conditions are met:
a) There is some prefix common to every RUN line (typically 'ALL').
b) The first line of the block is common to the output with every prefix.
c) The block has the same number of lines for the output with every prefix.
Also, regenerated all llvm-mca test files with the following command:
update_mca_test_checks.py "../test/tools/llvm-mca/*/*.s" "../test/tools/llvm-mca/*/*/*.s"
The new analysis showed a "multiple lines not disambiguated by prefixes" warning
for test "AArch64/Exynos/scheduler-queue-usage.s" so I've also added some
explicit prefixes to each of the RUN lines in that test.
Differential Revision: https://reviews.llvm.org/D47321
llvm-svn: 333204
Summary:
In LICM, CFG could be changed in splitPredecessorsOfLoopExit(), which update
only DT and LoopInfo. Therefore, we should preserve only DT and LoopInfo specifically,
instead of all analyses that depend on the CFG (setPreservesCFG()).
This change should fix PR37323.
Reviewers: uabelho, davide, dberlin, Ka-Ka
Reviewed By: dberlin
Subscribers: mzolotukhin, bjope, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46775
llvm-svn: 333198
The ARM/ARM64 AESE and AESD instructions have a builtin XOR as the first step in
the instruction. Therefore, if the AES key is zero and the AES data was
previously XORed, it can be combined into a single instruction.
Differential Revision: https://reviews.llvm.org/D47239
Patch by Michael Brase!
llvm-svn: 333193
Ideally we'd be able to test a CPU by using __builtin_readcyclecounter()/RDTSC instead (PR37193) if a model/cycle-counter is not specified.
NOTE: Jaguar PMCs don't give good coverage of resource pipes specified in the model (at the macro-vs-micro-op levels) but we should be able to cover at least a few resources.
llvm-svn: 333190
Summary:
It's internal to the VPlanHCFGBuilder and should not be visible outside of its
translation unit.
Reviewers: dcaballe, fhahn
Reviewed By: fhahn
Subscribers: rengolin, bollu, tschuett, llvm-commits, rkruppe
Differential Revision: https://reviews.llvm.org/D47312
llvm-svn: 333187
Forgot to move the CommandLine.h include form the implementation to the
header and didn't notice the failure with my local modules build.
llvm-svn: 333177
This commit adds a color category so tools can document this option and
enables it for dwarfdump and dsymuttil.
rdar://problem/40498996
llvm-svn: 333176
In addPhysRegDeps, subregister entries of the defined register were previously
not removed from Uses or Defs, which resulted in extra redundant edges for
subregs around the register definition.
This is principally NFC (in very rare cases some node got a different height).
This makes the DAG more readable and efficient in some cases.
Review: Andy Trick
https://reviews.llvm.org/D46838
llvm-svn: 333165
Krasimir Georgiev