Doesn't handle varargs and other fun things, but it's a start. (also
doesn't print these strictly as valid C++ when it's a pointer to
function, it'll print as "void(int)*" instead of "void (*)(int)")
llvm-svn: 348965
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, for the Exynos processors.
Differential revision: https://reviews.llvm.org/D55345
llvm-svn: 348774
Summary: This should avoid failing on old CPUs that do not have a cycle counter.
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D55416
llvm-svn: 348740
PE/COFF sections can have section names truncated to 8 chars, in order to
have the name available at runtime. (The string table, where long untruncated
names are stored, isn't loaded at runtime.)
This allows various llvm tools to dump the .eh_frame section from such
executables.
Patch by Peiyuan Song!
Differential Revision: https://reviews.llvm.org/D55407
llvm-svn: 348708
It was failing as below. Adding a triple seems to help.
--
: 'RUN: at line 2'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m1 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M1
: 'RUN: at line 3'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m3 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M3
--
Exit Code: 1
Command Output (stderr):
--
/work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s:36:12: error: M1-NEXT: expected string not found in input
^
<stdin>:21:2: note: scanning from here
1 0 0.25 b Ltmp0
^
--
llvm-svn: 348577
The test was fully rewritten for simplification.
New test code was suggested by David Blaikie.
Differential revision: https://reviews.llvm.org/D55261
llvm-svn: 348464
I just hard core goofed when I wrote this and created a different name
for no good reason. I'm failry aware of most "fresh" users of llvm-objcopy
(that is, users which are not using it as a drop in replacement for GNU
objcopy) and can say that only "-j" is being used by such people so this
patch should strictly increase compatibility and not remove it.
Differential Revision: https://reviews.llvm.org/D52180
llvm-svn: 348446
Split timestamp preservation tests into atime and mtime test, and skip
the former on NetBSD. When the filesystem is mounted noatime, NetBSD
not only inhibits implicit atime updates but also prevents setting atime
via utime(), causing the test to fail.
Differential Revision: https://reviews.llvm.org/D55271
llvm-svn: 348354
This flag does not exist in GNU objcopy but has a major use case.
Debugging tools support the .build-id directory structure to find
debug binaries. There is no easy way to build this structure up
however. One way to do it is by using llvm-readelf and some crazy
shell magic. This implements the feature directly. It is most often
the case that you'll want to strip a file and send the original to
the .build-id directory but if you just want to send a file to the
.build-id directory you can copy to /dev/null instead.
Differential Revision: https://reviews.llvm.org/D54384
llvm-svn: 348174
When there is no .debug_addr section for some reason,
llvm-dwarfdump would print the bogus empty section name when dumping ranges
in .debug_info:
DW_AT_ranges [DW_FORM_rnglistx] (indexed (0x0) rangelist = 0x00000004
[0x0000000000000000, 0x0000000000000001) ""
[0x0000000000000000, 0x0000000000000002) "")
That happens because of the code which uses 0 (zero) as a section index as a default value.
The code should use -1ULL instead because technically 0 is a valid zero section index
in ELF and -1ULL is a special constant used that means "no section available".
This is mostly a fix for the overall correctness/safety of the code,
but a test case is provided too.
Differential revision: https://reviews.llvm.org/D55113
llvm-svn: 348115
Usually local symbols will have their address described in the debug
map. Global symbols have to have their address looked up in the symbol
table of the main executable. By playing with 'ld -r' and export lists,
you can get a symbol described as global by the debug map while actually
being a local symbol as far as the link in concerned. By gathering the
address of local symbols, we fix this issue.
Also, we prefer a global symbol in case of a name collision to preserve
the previous behavior.
Note that using the 'ld -r' tricks, people can actually cause symbol
names collisions that dsymutil has no way to figure out. This fixes the
simple case where there is only one symbol of a given name.
rdar://problem/32826621
Differential revision: https://reviews.llvm.org/D54922
llvm-svn: 348021
In this diff the elf-specific tests are moved into the subfolder llvm-objcopy/ELF
(the change was discussed in the comments on https://reviews.llvm.org/D54674).
A separate code reivew wasn't sent for this change
since Phabricator is failing to create such a large diff.
Test plan:
make check-all
make check-llvm-tools
make check-llvm-tools-llvm-objcopy
llvm-svn: 347958
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
This allows libtool to detect the presence of llvm-strip and use
it with the options --strip-debug and --strip-unneeded.
Also hook up the -V alias for objcopy.
Differential Revision: https://reviews.llvm.org/D54936
llvm-svn: 347731
This change is in preparation for a patch that fixes PR36666.
llvm-mca currently doesn't know if a buffered processor resource describes a
load or store queue. So, any dynamic dispatch stall caused by the lack of
load/store queue entries is normally reported as a generic SCHEDULER stall. See for
example the -dispatch-stats output from the two tests modified by this patch.
In future, processor models will be able to tag processor resources that are
used to describe load/store queues. That information would then be used by
llvm-mca to correctly classify dynamic dispatch stalls caused by the lack of
tokens in the LS.
llvm-svn: 347662
Summary:
By default sanstats search binaries at the same location where they were when
stats was collected. Sometime you can not print report immediately or you need
to move post-processing to another workstation. To support this use-case when
original binary is missing sanstats will fall-back to directory with sanstats
file.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53857
llvm-svn: 347601
Summary: Help with off-line symbolization or other type debugging.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53606
llvm-svn: 347600
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasShiftedReg()`.
Differential revision: https://reviews.llvm.org/D54820
llvm-svn: 347598
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::isScaledAddr()`
Differential revision: https://reviews.llvm.org/D54777
llvm-svn: 347597
By default, llvm-mca conservatively assumes that a register operand from the
variadic sequence is both a register read and a register write. That is because
MCInstrDesc doesn't describe extra variadic operands; we don't have enough
dataflow information to tell which register operands from the variadic sequence
is a definition, and which is a use instead.
However, if a variadic instruction is flagged 'mayStore' (but not 'mayLoad'),
and it has no 'unmodeledSideEffects', then llvm-mca (very) optimistically
assumes that any register operand in the variadic sequence is a register read
only. Conversely, if a variadic instruction is marked as 'mayLoad' (but not
'mayStore'), and it has no 'unmodeledSideEffects', then llvm-mca optimistically
assumes that any extra register operand is a register definition only.
These assumptions work quite well for variadic load/store multiple instructions
defined by the ARM backend.
llvm-svn: 347522
`llvm-mca` relies on the predicates to be based on `MCSchedPredicate` in order
to resolve the scheduling for variant instructions. Otherwise, it aborts
the building of the instruction model early.
However, the scheduling model emitter in `TableGen` gives up too soon, unless
all processors use only such predicates.
In order to allow more processors to be used with `llvm-mca`, this patch
emits scheduling transitions if any processor uses these predicates. The
transition emitted for the processors using legacy predicates is the one
specified with `NoSchedPred`, which is based on `MCSchedPredicate`.
Preferably, `llvm-mca` should instead assume a reasonable default when a
variant transition is not based on `MCSchedPredicate` for a given processor.
This issue should be revisited in the future.
Differential revision: https://reviews.llvm.org/D54648
llvm-svn: 347504
With this change, InstrBuilder emits an error if the MCInst sequence contains an
instruction with a variadic opcode, and a non-zero number of variadic operands.
Currently we don't know how to correctly analyze variadic opcodes. The problem
with variadic operands is that there is no information for them in the opcode
descriptor (i.e. MCInstrDesc). That means, we don't know which variadic operands
are defs, and which are uses.
In future, we could try to conservatively assume that any extra register
operands is both a register use and a register definition.
This patch fixes a subtle bug in the evaluation of read/write operands for ARM
VLD1 with implicit index update. Added test vld1-index-update.s
llvm-svn: 347503
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
This patch fixes an invalid memory read introduced by r346487.
Before this patch, partial register write had to query the latency of the
dependent full register write by calling a method on the full write descriptor.
However, if the full write is from an already retired instruction, chances are
that the EntryStage already reclaimed its memory.
In some parial register write tests, valgrind was reporting an invalid
memory read.
This change fixes the invalid memory access problem. Writes are now responsible
for tracking dependent partial register writes, and notify them in the event of
instruction issued.
That means, partial register writes no longer need to query their associated
full write to check when they are ready to execute.
Added test X86/BtVer2/partial-reg-update-7.s
llvm-svn: 347459
Summary:
llvm-objcopy/strip support `--keep` (for sections) and `--keep-symbols` (for symbols). For consistency and clarity, rename `--keep` to `--keep-section`.
In fact, for GNU compatability, -K is --keep-symbol, so it's weird that the alias `-K` is not the same as the short-ish `--keep`.
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54477
llvm-svn: 346782
David Blaikie