Loosens an assert in getMemRIX16Encoding that restricts DQ-form instructions to
using an immediate, so that we can assemble instructions like lxv/stxv where the
offset is an expression.
Differential Revision: https://reviews.llvm.org/D51122
llvm-svn: 340761
We're using a 256-bit PACKUS to do the truncation, but that instruction operates on 128-bit lanes. So previously we shuffled first to rearrange the lanes. But that requires 2 shuffles. Instead we can shuffle after the PACKUS using a single VPERMQ. This matches what our normal LowerTRUNCATE code does when it uses PACKUS.
Differential Revision: https://reviews.llvm.org/D51284
llvm-svn: 340757
InstCombine mucks these up a bit. So we need to do some additional pattern matching to fix it. There are a still a few special cases not handled, but this covers the general case.
Differential Revision: https://reviews.llvm.org/D50952
llvm-svn: 340756
Summary:
This patch introduces llvm-mca as a library. The driver (llvm-mca.cpp), views, and stats, are not part of the library.
Those are separate components that are not required for the functioning of llvm-mca.
The directory has been organized as follows:
All library source files now reside in:
- `lib/HardwareUnits/` - All subclasses of HardwareUnit (these represent the simulated hardware components of a backend).
(LSUnit does not inherit from HardwareUnit, but Scheduler does which uses LSUnit).
- `lib/Stages/` - All subclasses of the pipeline stages.
- `lib/` - This is the root of the library and contains library code that does not fit into the Stages or HardwareUnit subdirs.
All library header files now reside in the `include` directory and mimic the same layout as the `lib` directory mentioned above.
In the (near) future we would like to move the library (include and lib) contents from tools and into the core of llvm somewhere.
That change would allow various analysis and optimization passes to make use of MCA functionality for things like cost modeling.
I left all of the non-library code just where it has always been, in the root of the llvm-mca directory.
The include directives for the non-library source file have been updated to refer to the llvm-mca library headers.
I updated the llvm-mca/CMakeLists.txt file to include the library headers, but I made the non-library code
explicitly reference the library's 'include' directory. Once we eventually (hopefully) migrate the MCA library
components into llvm the include directives used by the non-library source files will be updated to point to the
proper location in llvm.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: mgorny, javed.absar, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D50929
llvm-svn: 340755
Summary: We needed quotes around %python before to make python work correctly (on Windows) if the path contains spaces. I recently made a change so that %python now inherently has quotes, so now adding quotes around %python makes the test fail because the quotes cancel each other.
Reviewers: asmith, inglorion
Subscribers: mehdi_amini, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51244
llvm-svn: 340753
In Bionic, open can be overloaded for _FORTIFY_SOURCE support, causing
compile errors of RetryAfterSignal due to overload resolution. Wrapping
the call in a lambda avoids this.
Based on a patch by Chih-Wei Huang <cwhuang@linux.org.tw>!
llvm-svn: 340751
Summary:
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51241
llvm-svn: 340750
Before this patch, the SchedulerStatistics only printed the maximum number of
buffer entries consumed in each scheduler's queue at a given point of the
simulation.
This patch restructures the reported table, and adds an extra field named
"Average number of used buffer entries" to it.
This patch also uses different colors to help identifying bottlenecks caused by
high scheduler's buffer pressure.
llvm-svn: 340746
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
Summary:
This commit adds the case of tail calling a sret function from a non-sret
function when both functions have the C calling convention.
llvm-svn: 340737
Summary: If an object file ends with a relocation that is smaller
than 4 bytes we will write outside the Data array and trigger an
"Invalid index" assertion.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50971
llvm-svn: 340736
Summary:
Remove unnecessary lines from `sibcall.ll` and rename labels according
to @RKSimon's recommendations in the D45653 conversation.
llvm-svn: 340735
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
Summary: The GR740 provides an up cycle counter in the registers ASR22
and ASR23. As these registers can not be read together atomically we only
use the value of ASR23 for llvm.readcyclecounter(). The ASR23 register
holds the 32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jfb, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 340733
We have a class `ImplicitControlFlowTracking` which allows us to keep track of
instructions that can abnormally exit and answer queries like "whether or not
there is side-exiting instruction above this instruction in its block".
We may want to have the similar tracking for other types of "special" instructions,
for example instructions that write memory.
This patch separates ImplicitControlFlowTracking into two classes, isolating all
general logic not related to implicit control flow into its parent class. We can
later make another child of this class to keep track of instructions that write
memory.
The motivation for that is that we want to make these checks efficiently in the
patch https://reviews.llvm.org/D50891.
NOTE: The naming of the parent class is not super cool, but the other options we
have are hardly better. Please feel free to rename it as NFC if you think you've
found a more informative name for it.
Differential Revision: https://reviews.llvm.org/D50954
Reviewed By: fedor.sergeev
llvm-svn: 340728
The existing method is protected, and requires using DataRefImpl
and SmallVector.
Differential Revision: https://reviews.llvm.org/D50995
llvm-svn: 340725
Summary:
Currently bitcasting constants from f64 to v2i32 is done by storing the
value to the stack and then loading it again. This is not necessary, but
seems to happen because v2i32 is a valid type for Sparc V8. If it had not
been legal, we would have gotten help from the type legalizer.
This patch tries to do the same work as the legalizer would have done by
bitcasting the floating point constant and splitting the value up into a
vector of two i32 values.
Reviewers: venkatra, jyknight
Reviewed By: jyknight
Subscribers: glaubitz, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49219
llvm-svn: 340723
We cannot directy reuse the patterns of StPat because for some reason the store
DAG node and the atomic_store_nn DAG nodes put the ptr and the value in
different positions. Currently we attempt to store the address to an address
formed by the value.
Differential Revision: https://reviews.llvm.org/D51217
llvm-svn: 340722
vXi32 support was recently moved from LowerMUL_LOHI to LowerMULH.
This commit shares the getOperand calls, switches both to use common IsSigned flag, and hoists the NumElems/NumElts variable.
llvm-svn: 340720
This is a pretty large refactor / re-write of the Microsoft
demangler. The previous one was a little hackish because it
evolved as I was learning about all the various edge cases,
exceptions, etc. It didn't have a proper AST and so there was
lots of custom handling of things that should have been much
more clean.
Taking what was learned from that experience, it's now
re-written with a completely redesigned and much more sensible
AST. It's probably still not perfect, but at least it's
comprehensible now to someone else who wants to come along
and make some modifications or read the code.
Incidentally, this fixed a couple of bugs, so I've enabled
the tests which now pass.
llvm-svn: 340710
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
Summary:
Previously most CPUs inherited cmov support through Feature64Bit(or FeatureCMPXCHG16HB implying Feature64Bit) or FeatureSSE1.
This has the surprising side effect that -mattr=-cmov causes an assert to fire in 64-bit mode because it clears the Feature64Bit. Or in 32-bit mode, -mattr=-cmov disables any sse/avx features which seems surprising.
This patch removes the implication and instead updates hasCMOV in X86Subtarget to check SSE1 or is64Bit in addition to the regular cmov flag. This should keep most things working the way they did before. I don't believe there is a way to specific "-cmov" directly from clang so this should only effect our lower level tools.
This does stop -mattr=cx16(cmpxchg16b) from implying cmov is enabled via the 64bit flag as you can see from one of the changed tests. But that was a 32-bit test so I don't know why it enabled cx16 anyway.
For the other test I had to add -sse to override the new sse check in hasCMOV.
Reviewers: RKSimon, DavidKreitzer, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51228
llvm-svn: 340707
Summary: This matches gcc and one cpuid dump I found online. Given that these are considered 7th generation x86 CPU it seems likely they support cmov since cmov was added by Intel in their 6th generation.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51264
llvm-svn: 340706
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Private symbols are not visible outside the object file, and so not defined by
the object file from ORC's perspective.
No test case yet. Ideally this would be a unit test parsing a checked-in binary,
but I am not aware of any way to reference the LLVM source root from a unit
test.
llvm-svn: 340703
vectors, and move this test code into an anonymous namespace.
Hoping that this will avoid hitting an MSVC bug that causes it to crash
and burn pretty spectacularly. Also, this degree of clever use of
initializer lists seems somewhat questionable in general. ;]
llvm-svn: 340702
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
agree with MSVC.
There isn't actually a need for specialization here as we can write the
code generically and just have a test that will fold away as a constant.
llvm-svn: 340700
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
Legalize G_ADD for types smaller than i32.
LegalizationArtifactCombiner replaces extend instructions with appropriate
bitwise instructions.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51213
llvm-svn: 340697
Summary: NameLen wasn't being used and caused the parameters in gdb to very long, in my case, crashes in others. Please also perform the correct magical incarnations to have this be applied to the LLVM 7 branch.
Reviewers: whitequark, CodaFi
Reviewed By: CodaFi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51141
llvm-svn: 340691
Summary:
The only time vector SMUL_LOHI/UMUL_LOHI nodes are created is during division/remainder lowering. If its created before op legalization, generic DAGCombine immediately turns that SMUL_LOHI/UMUL_LOHI into a MULHS/MULHU since only the upper half is used. That node will stick around through vector op legalization and will be turned back into UMUL_LOHI/SMUL_LOHI during op legalization. It will then be custom lowered by the X86 backend. Due to this two step lowering the vector shuffles created by the custom lowering get legalized after their inputs rather than before. This prevents the shuffles from being combined with any build_vector of constants.
This patch uses changes vXi32 to use MULHS/MULHU instead. This is what the later DAG combine did anyway. But by skipping the change back to UMUL_LOHI/SMUL_LOHI we lower it before any constant BUILD_VECTORS. This allows the vector_shuffle creation to constant fold with the build_vectors. This accounts for the test changes here.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51254
llvm-svn: 340690
Summary:
Previously the value being stored is the last operand in SDNode. This causes the type legalizer to visit the mask operand before the value operand. The type legalizer was more complicated because of this since we want the type of the value to drive the decisions.
This patch moves the value to be the first operand so we visit it first during type legalization. It also simplifies the type legalization code accordingly.
X86 is currently the only in tree target that uses this SDNode. Not sure if there are any users out of tree.
Reviewers: RKSimon, delena, hfinkel, eli.friedman
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50402
llvm-svn: 340689
This is a preliminary step for a preliminary step for D50992.
I noticed that x86 often misses chances to load a scalar directly
into a vector register.
So this patch is just allowing more of those cases to match a
broadcast op in lowerBuildVectorAsBroadcast(). The old code comment
said it doesn't make sense to use a broadcast when we're loading a
single element and everything else is undef, but I think that's the
best case in the improved tests in insert-loaded-scalar.ll. We avoid
scalar-to-vector-register move and/or less efficient shuffling.
Note that there are some existing types that were already producing
a broadcast, but that happens semi-accidentally. Ie, it's not
happening as part of lowerBuildVectorAsBroadcast(). The build vector
gets expanded into load + shuffle, and then shuffle lowering produces
the broadcast.
Description of the other test diffs:
1. avx-basic.ll - replacing load+shufle is a win.
2. sse3-avx-addsub-2.ll - vmovddup vs. vbroadcastss is neutral
3. sse41.ll - don't care - we convert that intrinsic to generic IR now, so this test is deprecated
4. vector-shuffle-128-v8.ll / vector-shuffle-256-v16.ll - pshufb alternatives with an extra instruction are not obviously bad
Differential Revision: https://reviews.llvm.org/D51125
llvm-svn: 340685
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
llvm-svn: 340684
Summary:
If any of the bundled instructions are marked as FrameSetup
or FrameDestroy, then that property is set on the BUNDLE
instruction as well.
As long as the scheduler/packetizer aren't mixing
prologue/epilogue instructions (i.e. all the bundled
instructions have the same property) then this simply gives
the bundle the correct property (so when using a bundle
iterator in late passes a bundle will be correctly identified
as FrameSetup/FrameDestroy).
When for example bundling a mix of FrameSetup instructions
with non-FrameSetup instructions it could be discussed if
the bundle should have the property or not. The choice here
has been to set these properties on the BUNDLE instruction if
any of the bundled instructions have the property set.
Reviewers: #debug-info, kparzysz
Reviewed By: kparzysz
Subscribers: vsk, thegameg, llvm-commits
Differential Revision: https://reviews.llvm.org/D50637
llvm-svn: 340680
Summary:
When computeIntervals is looking through COPY instruction to
extend the location mapping for a debug variable it did not
handle subregisters correctly.
For example
DBG_VALUE debug-use %0.sub_8bit_hi, ...
%1:gr16 = COPY %0
was transformed into
DBG_VALUE debug-use %0.sub_8bit_hi, ...
%1:gr16 = COPY %0
DBG_VALUE debug-use %1, ...
So the subregister index was missing in the added DBG_VALUE.
As long as the subreg refered to the least significant bits
of the superreg, then I guess we could get the correct
result in a debugger even when referring to the superreg.
But as in the example above when the subreg refers to other
parts of the superreg, then debuginfo would be incorrect.
I'm not sure exactly how to fix this properly, so this patch
just avoids looking through the COPY when there is a subreg
involved (for more info, see the FIXME added in the code).
Reviewers: rnk, aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D50788
llvm-svn: 340679
Summary:
Handle the case IDVal is an empty string.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer
Fuzzer for the RISC-V assembly language.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, niravd, pcc, peter.smith, asb, grosbach, llvm-commits, bcain, kito-cheng, shiva0217, rogfer01, PkmX
Differential Revision: https://reviews.llvm.org/D50808
llvm-svn: 340678
HermitCore is a POSIX-compatible kernel for running a single application in an isolated environment to get maximum performance and predictable runtime behavior. It can either be used bare-metal on hardware or a VM (Unikernel) or side by side to an existing Linux system (Multikernel).
Due to the latter feature, HermitCore binaries are marked with ELFOSABI_STANDALONE to let the Linux ELF loader distinguish them from regular Unix/Linux binaries and load them using the HermitCore "proxy" tool.
Patch by Colin Finck!
llvm-svn: 340675
The function's new implementation from r340583 had a bug in it that
could cause an invalid scope to be generated when merging two
DILocations with no common ancestor scope.
This patch detects this situation and picks the scope of the first
location. This is not perfect, because the scope is misleading, but on
the other hand, this will be a line 0 location.
rdar://problem/43687474
Differential Revision: https://reviews.llvm.org/D51238
llvm-svn: 340672
demangling process when it does.
Use this to support a "lookup" query for the mangling canonicalizer that
does not create new nodes. This could also be used to implement
demangling with a fixed-size temporary storage buffer.
Reviewers: erik.pilkington
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51003
llvm-svn: 340670
This node doesn't directly correspond to a mangled name fragment, so
it's useful to explicitly describe when it's created and what it's for.
llvm-svn: 340664
Summary:
Given a set of equivalent name fragments, this mechanism determines whether two
mangled names are equivalent. The intent is to use this for fuzzy matching of
profile data against the program after certain refactorings are performed.
Reviewers: erik.pilkington, dlj
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D50935
llvm-svn: 340663
Choosing to revert the change and do it again, hopefully preserving the history
of the changes by using svn copy instead of simply creating a new file from the
contents within Scheduler.
llvm-svn: 340661
Back in https://reviews.llvm.org/D19559, I tried to teach CVP about range facts implied by value/value icmps (i.e. no constants.) In the meantime, we've implemented the optimization, but I couldn't find tests checked in, so adding them.
llvm-svn: 340660
Otherwise, the debug info is incorrect. On its own, this is mostly
harmless, but the safe-stack also later inlines the call to
__safestack_pointer_address, which leads to debug info with the wrong
scope, which eventually causes an assertion failure (and incorrect debug
info in release mode).
Differential Revision: https://reviews.llvm.org/D51075
llvm-svn: 340651
This (partially) fixes a regression introduced by
https://reviews.llvm.org/D43945 / r327399, which parallelized
DwarfLinker. This patch avoids parsing and allocating the memory for
all input DIEs up front and instead only allocates them in the
concurrent loop in the AnalyzeLambda. At the end of the loop the
memory from the LinkContext is cleared again.
This reduces the peak memory needed to link the debug info of a
non-modular build of the Swift compiler by >3GB.
rdar://problem/43444464
Differential Revision: https://reviews.llvm.org/D51078
llvm-svn: 340650
Firstly, require the symbol to be used within the module. If a
symbol is unused within a module, then by definition it cannot be
address-significant within that module. This condition is useful on all
platforms because it could make symbol tables smaller -- without this
change, emitting an address-significance table could cause otherwise
unused undefined symbols to be added to the object file.
But this change is necessary with COFF specifically in order to
preserve the property that an unreferenced undefined symbol in an IR
module does not result in a link failure. This is already the case for
ELF because ELF linkers only reject links with unresolved symbols if
there is a relocation to that symbol, but COFF linkers require all
undefined symbols to be resolved regardless of relocations. So if
a module contains an unreferenced undefined symbol, we need to make
sure not to add it to the address-significance table (and thus the
symbol table) in case it doesn't end up resolved at link time.
Secondly, do not add dllimport symbols to the table. These symbols
won't be able to be resolved because their definitions live in another
module and are accessed via the IAT, and the address-significance
table has no effect on other modules anyway. It wouldn't make sense
to add the IAT entry symbol to the address-significance table either
because the IAT entry isn't address-significant -- the generated code
never takes its address.
Differential Revision: https://reviews.llvm.org/D51199
llvm-svn: 340648
My previoust test case had skipped CUs from one TU out of a two-TU LTO
scenario, which meant the CU index wasn't needed (as it was unambiguous
which CU a table entry applied to) - expanding the test to use 3 TUs,
skipping one (so long as it's not the last one) shows the indexes are
miscomputed. Fix that with a little indirection for the index.
llvm-svn: 340646
This patch will address using the xscpsgndp instruction to copy floating point
scalar registers instead of the xxlor (specifically XXLORf) instruction that is
currently used. Additionally, this patch of utilizing xscpsgndp will apply to
P9, while pre-P9 will still use xxlor.
Patch by amyk
Differential Revision: https://reviews.llvm.org/D50004
llvm-svn: 340643
Previously we allowed the store to be Custom. But without knowing for sure that the Custom handling won't split the store, we shouldn't convert a volatile store. We also probably shouldn't be creating a store the requires custom handling after LegalizeOps. This could lead to an infinite loop if the custom handling was to insert a bitcast. Though I guess isStoreBitCastBeneficial could be used to block such a loop.
The test changes here are due to the volatile part of this. The stores in the test are all volatile and i32 stores are marked custom, So we are no longer converting them
This is related to D50491 where I was trying to allow some bitcasting of volatile loads
Differential Revision: https://reviews.llvm.org/D50578
llvm-svn: 340626
Summary:
Sometimes reading an output *.ll file it is not easy to understand why some callsites are not inlined. We can read output of inline remarks (option --pass-remarks-missed=inline) and try correlating its messages with the callsites.
An easier way proposed by this patch is to add to every callsite processed by Inliner an attribute with the latest message that describes the cause of not inlining this callsite. The attribute is called //inline-remark//. By default this feature is off. It can be switched on by the option //-inline-remark-attribute//.
For example in the provided test the result method //@test1// has two callsites //@bar// and inline remarks report different inlining missed reasons:
remark: <unknown>:0:0: bar not inlined into test1 because too costly to inline (cost=-5, threshold=-6)
remark: <unknown>:0:0: bar not inlined into test1 because it should never be inlined (cost=never): recursive
It is not clear which remark correspond to which callsite. With the inline remark attribute enabled we get the reasons attached to their callsites:
define void @test1() {
call void @bar(i1 true) #0
call void @bar(i1 false) #2
ret void
}
attributes #0 = { "inline-remark"="(cost=-5, threshold=-6)" }
..
attributes #2 = { "inline-remark"="(cost=never): recursive" }
Patch by: yrouban (Yevgeny Rouban)
Reviewers: xbolva00, tejohnson, apilipenko
Reviewed By: xbolva00, tejohnson
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D50435
llvm-svn: 340618
Once the invariant_start is reached, we know that no instruction *after* it can modify the memory. So, if we can prove the location isn't read *between entry into the loop and the execution of the invariant_start*, we can execute the invariant_start before entering the loop.
Differential Revision: https://reviews.llvm.org/D51181
llvm-svn: 340617
The way that PhiValues is integrated with BasicAA it is possible for a pass
which uses BasicAA to pick up an instance of BasicAA that uses PhiValues without
intending to, and then delete values from a function in a way that causes
PhiValues to return dangling pointers to these deleted values. Fix this by
having a set of callback value handles to invalidate values when they're
deleted.
llvm-svn: 340613
When used in cross-DSO mode, CFI will generate calls to special functions rather than trap instructions. For example, instead of generating
if (!InlinedFastCheck(f))
abort();
call *f
CFI generates
if (!InlinedFastCheck(f))
__cfi_slowpath(CallSiteTypeId, f);
call *f
This patch teaches cfi-verify to recognize calls to __cfi_slowpath and abort and treat them as trap functions.
In addition to normal symbols, we also parse the dynamic relocations to handle cross-DSO calls in libraries.
We also extend cfi-verify to recognize other patterns that occur using cross-DSO. For example, some indirect calls are not guarded by a branch to a trap but instead follow a call to __cfi_slowpath. For example:
if (!InlinedFastCheck(f))
call *f
else {
__cfi_slowpath(CallSiteTypeId, f);
call *f
}
In this case, the second call to f is not marked as protected by the current code. We thus recognize if indirect calls directly follow a call to a function that will trap on CFI violations and treat them as protected.
We also ignore indirect calls in the PLT, since on AArch64 each entry contains an indirect call that should not be protected by CFI, and these are labeled incorrectly when debug information is not present.
Differential Revision: https://reviews.llvm.org/D49383
llvm-svn: 340612
This adds a new method to ELFObjectFileBase that returns the symbols and addresses of PLT entries.
This design was suggested by pcc and eugenis in https://reviews.llvm.org/D49383.
Differential Revision: https://reviews.llvm.org/D50203
llvm-svn: 340610
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
This patch splits the file trace loading function into two versions, one
that takes a filename and one that takes a `DataExtractor`.
This change is a precursor to larger changes to increase test coverage
for the trace loading implementation.
llvm-svn: 340603
Having the KnownBits as an output parameter is kind of awkward to use
and a holdover from when it was two separate APInts. Instead, just
return a KnownBits object.
I'm leaving the existing interface in place for now, since updating
the callers all at once would be thousands of lines of diff.
llvm-svn: 340594
Per LLVM's CommandGuide, llvm-profdata show -text is supposed to produce
textual output that can be passed as input to further llvm-profdata
invocations. This previously didn't work for two reasons:
1) -text was not sufficient to enable the machine-readable text format output;
instead, -text was effectively ignored if -counts was not also specified. (With
this patch, -counts is instead ignored if -text is specified, because the
machine-readable text format always includes counts.)
2) When the input data was an IR-level profile, the :ir marker was missing from
the output, resulting in a text format output that would not be usable as
profiling data due to function hash mismatches.
Differential Revision: https://reviews.llvm.org/D51188
llvm-svn: 340592
Fix a set of related bugs:
* Considering two locations as equivalent when their lines are the same
but their scopes are different causes erroneous debug info that
attributes a commoned call to be attributed to one of the two calls it
was commoned from.
* The previous code to compute a new location's scope was inaccurate and
would use the inlinedAt that was the /parent/ of the inlinedAt that is
the nearest common one, and also used that parent scope instead of the
nearest common scope.
* Not generating new locations generally seemed like a lower quality
choice
There was some risk that generating more new locations could hurt object
size by making more fine grained line table entries, but it looks like
that was offset by the decrease in line table (& address & ranges) size
caused by more accurately computing the scope - which likely lead to
fewer range entries (more contiguous ranges) & reduced size that way.
All up with these changes I saw minor reductions (-1.21%, -1.77%) in
.rela.debug_ranges and .rela.debug_addr (in a fission, compressed debug
info build) as well as other minor size changes (generally reductinos)
across the board (-1.32% debug_info.dwo, -1.28% debug_loc.dwo). Measured
in an optimized (-O2) build of the clang binary.
If you are investigating a size regression in an optimized debug builds,
this is certainly a patch to look into - and I'd be happy to look into
any major regressions found & see what we can do to address them.
llvm-svn: 340583
In order for more complex updates of MSSA to happen (e.g. those in
D45299), MemoryDefs need to be actual `Use`s of what they're optimized
to. This patch makes that happen.
In addition, this patch changes our optimization behavior for Defs
slightly: we'll now consider a Def optimization invalid if the
MemoryAccess it's optimized to changes. That we weren't doing this
before was a bug, but given that we were tracking these with a WeakVH
before, it was sort of difficult for that to matter.
We're already have both of these behaviors for MemoryUses. The
difference is that a MemoryUse's defining access is always its optimized
access, and defining accesses are always `Use`s (in the LLVM sense).
Nothing exploded when testing a stage3 clang+llvm locally, so...
This also includes the test-case promised in r340461.
llvm-svn: 340577
Lower integer arguments smaller than i32.
Support both register and stack arguments.
Define setLocInfo function for setting LocInfo field in ArgLocs vector.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51031
llvm-svn: 340572
Summary:
Splats are fewer bytes than v128.consts, so use them when either could
apply.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51179
llvm-svn: 340569
Summary:
Remove the use of pair inside the tuple in concat_iterator, and create separate begins and ends tuples instead.
This fixes the failure for llvm <= 3.7 and libstd++ that broke the hexagon build.
Reviewers: timshen
Subscribers: sanjoy, jlebar, dexonsmith, kparzysz, llvm-commits
Differential Revision: https://reviews.llvm.org/D51067
llvm-svn: 340567
The variable index pattern is different than the constant index
cases as shown in D51125. We might want to splat regardless of
whether the scalar is loaded from memory or transferred from GPR.
llvm-svn: 340565
Summary:
Avoid "count" if possible -> use "find" to check for the existence of keys.
Passed llvm test suite.
Reviewers: fhahn, dcaballe, mkuper, rengolin
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51054
llvm-svn: 340563
The previous change ignored the latter resulting in crash dumps being generated when LLVM_ENABLE_CRASH_DUMPS was
set, but coreFilesPrevented was true.
llvm-svn: 340561
Summary:
I got "Use not jointly dominated by defs" when removePartialRedundancy
attempted to prune then re-extend a subrange whose only liveness was a
dead def at the copy being removed.
V2: Removed junk from test. Improved comment.
V3: Addressed minor review comments.
Subscribers: MatzeB, qcolombet, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D50914
Change-Id: I6f894e9f517f71e921e0c6d81d28c5f344db8dad
llvm-svn: 340549
We need to allow ConstantExpr Selects in addition to SelectInst.
I'll try to put together a test case, but I wanted to fix the issues being reported.
Fixes PR38677
llvm-svn: 340546
Thanks to @waltl for reporting this issue.
I have also added an assert to check for invalid null strategy objects, and I
have reworded a couple of code comments in Scheduler.h
llvm-svn: 340545
The commit that added this functionality:
rL322957
may be causing/exposing a miscompile in PR38648:
https://bugs.llvm.org/show_bug.cgi?id=38648
so allow enabling/disabling to make debugging easier.
llvm-svn: 340540
These changes expand the FunctionAttr logic in order to mark functions as
WriteOnly when appropriate. This is done through an additional bool variable
and extended logic.
Reviewers: hfinkel, jdoerfert
Differential Revision: https://reviews.llvm.org/D48387
llvm-svn: 340537
With this patch, users can now customize the pipeline selection strategy for
scheduler resources. The resource selection strategy can be defined at processor
resource granularity. This enables the definition of different strategies for
different hardware schedulers.
To override the strategy associated with a processor resource, users can call
method ResourceManager::setCustomStrategy(), and pass a 'ResourceStrategy'
object in input.
Class ResourceStrategy is an abstract class which declares virtual method
`ResourceStrategy::select()`. Method select() is meant to implement the actual
strategy; it is responsible for picking the next best resource from a set of
available pipeline resources. Custom strategy must simply override that method.
By default, processor resources are associated with instances of
'DefaultResourceStrategy'. A 'DefaultResourceStrategy' internally implements a
simple round-robin selector. For more details, please refer to the code comments
in Scheduler.h.
llvm-svn: 340536
When GVN sets the incoming value for a phi to undef because the incoming block
is unreachable it needs to also invalidate the cached info for that phi in
MemoryDependenceAnalysis, otherwise later queries will return stale information.
Differential Revision: https://reviews.llvm.org/D51099
llvm-svn: 340529
Both DWARFDebugLine and DWARFDebugAddr used the same callback mechanism
for handling recoverable errors. They both implemented similar warn() function
to be used as such callbacks.
In this revision we get rid of code duplication and move this warn() function
to DWARFContext as DWARFContext::dumpWarning().
Reviewers: lhames, jhenderson, aprantl, probinson, dblaikie, JDevlieghere
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D51033
llvm-svn: 340528
This version of the patch fixes cleaning up ssa_copy intrinsics, so it does not
crash for instructions in blocks that have been marked unreachable.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 340525
For the _WIN32 macro, it is the definedness that matters rather than
the value. Most uses of the macro already rely on the definedness.
This commit fixes the few remaining uses that relied on the value.
Differential Revision: https://reviews.llvm.org/D51105
llvm-svn: 340520
Most users won't have to worry about this as all of the
'getOrInsertFunction' functions on Module will default to the program
address space.
An overload has been added to Function::Create to abstract away the
details for most callers.
This is based on https://reviews.llvm.org/D37054 but without the changes to
make passing a Module to Function::Create() mandatory. I have also added
some more tests and fixed the LLParser to accept call instructions for
types in the program address space.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D47541
llvm-svn: 340519
subtarget features for indirect calls and indirect branches.
This is in preparation for enabling *only* the call retpolines when
using speculative load hardening.
I've continued to use subtarget features for now as they continue to
seem the best fit given the lack of other retpoline like constructs so
far.
The LLVM side is pretty simple. I'd like to eventually get rid of the
old feature, but not sure what backwards compatibility issues that will
cause.
This does remove the "implies" from requesting an external thunk. This
always seemed somewhat questionable and is now clearly not desirable --
you specify a thunk the same way no matter which set of things are
getting retpolines.
I really want to keep this nicely isolated from end users and just an
LLVM implementation detail, so I've moved the `-mretpoline` flag in
Clang to no longer rely on a specific subtarget feature by that name and
instead to be directly handled. In some ways this is simpler, but in
order to preserve existing behavior I've had to add some fallback code
so that users who relied on merely passing -mretpoline-external-thunk
continue to get the same behavior. We should eventually remove this
I suspect (we have never tested that it works!) but I've not done that
in this patch.
Differential Revision: https://reviews.llvm.org/D51150
llvm-svn: 340515
Aligning section contents is not required, but only
recommended, by the specification. Microsoft's documentation says
(https://docs.microsoft.com/en-us/windows/desktop/debug/pe-format#section-table-section-headers):
"For object files, the value should be aligned on a 4-byte boundary
for best performance."
However, according to my measurements, aligning section contents has
a neutral to negative effect on performance.
I measured the median run time of 100 links of Chromium's
base_unittests on Linux with lld-link and on Windows with link.exe with
both aligned and unaligned sections. On Linux I didn't see a measurable
performance difference, and on Windows the link was slightly faster
with unaligned sections (presumably because on Windows the bottleneck
is I/O).
Also, the sections created by cl.exe are unaligned, so we should expect
tools to broadly accept unaligned sections.
Differential Revision: https://reviews.llvm.org/D51149
llvm-svn: 340514
This patch's test case relies on debug prints which isn't generally an
OK way to test stuff in LLVM and fails whenever asserts aren't enabled.
I've send a heads-up to the commit and detailed comments on the review.
llvm-svn: 340513
When complaining that the triple is incompatible with all targets, print out the triple not just a generic error about triples not matching.
llvm-svn: 340509
In lib/CodeGen/LiveDebugVariables.cpp, it uses std::prev(MBBI) to
get DebugValue's SlotIndex. However, the previous instruction may be
also a debug instruction. It could not use a debug instruction to query
SlotIndex in mi2iMap.
Scan all debug instructions and use the first debug instruction to query
SlotIndex for following debug instructions. Only handle DBG_VALUE in
handleDebugValue().
Differential Revision: https://reviews.llvm.org/D50621
llvm-svn: 340508
Summary:
Reorganize WebAssemblyInstrSIMD.td to put all of the instruction
definitions together, making it easier to see which instructions have
been implemented already. Depends on D51143.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51113
llvm-svn: 340504
Summary:
WebAssemblyInstrFormats.td retains only multiclasses that are used in
multiple other tablegen files.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51143
llvm-svn: 340503
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
If we have a min/max pair we can do a better job of counting sign bits if we look at them together. This is similar to what is done in the SelectionDAG version of computeNumSignBits for ISD::SMAX/SMIN.
Differential Revision: https://reviews.llvm.org/D51112
llvm-svn: 340480
Previously we asumed a vector reduction add is part of a loop and one of the input is a phi. But the code in SelectionDAGBuilder that sets vector reduction flag handles more cases than that. It just requires that the use chain ends in a horizontal reduction. And there are no other uses. This means it can handle unrolled reduction loops.
If the initial value of the reduction was 0, an unrolled loop would begin with a vector reduction add that has two sad inputs. Previously we would only transform one side of the add, but for this case we need to transform both sides.
I've created a lambda to reuse some of the code for both sides. And fixed the variables names to remove reference to "phi".
Differential Revision: https://reviews.llvm.org/D50817
llvm-svn: 340478
Summary:
This CL adds support for arbitrary BUILD_VECTORS, i.e. not splats and
not consts. This is the last feature needed to properly lower v2i64
multiplies without a i64x2.mul instruction (which is not in the spec),
so i64x2.mul is removed as well.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51082
Remove unnecessary condition and fix whitespace
llvm-svn: 340472
This solves the motivating case from:
https://bugs.llvm.org/show_bug.cgi?id=38527
If we are legalizing an FP vector op that maps to 1 of the LLVM intrinsics that mimic libm calls,
but we're going to end up with scalar libcalls for that vector type anyway, then we should unroll
the vector op into scalars before widening. This avoids libcalls because we've lost the knowledge
that some of the scalar elements are undef.
Differential Revision: https://reviews.llvm.org/D50791
llvm-svn: 340469
Matt Arsenault