This ensures that attributes such as the index bitwidth propagate
correctly to the AMDGPUToROCDL patterns.
Differential Revision: https://reviews.llvm.org/D125320
By analogy with the NVGPU dialect, introduce an AMDGPU dialect for
AMD-specific intrinsic wrappers.
The dialect initially includes wrappers around the raw buffer intrinsics.
On AMD GPUs, a memref can be converted to a "buffer descriptor" that
allows more precise control of memory access, such as by allowing for
out of bounds loads/stores to be replaced by 0/ignored without adding
additional conditional logic, which is important for performance.
The repository currently contains a limited conversion from
transfer_read/transfer_write to Mubuf intrinsics, which are an older,
deprecated intrinsic for the same functionality.
The new amdgpu.raw_buffer_* ops allow these operations to be used
explicitly and for including metadata such as whether the target
chipset is an RDNA chip or not (which impacts the interpretation of
some bits in the buffer descriptor), while still maintaining an
MLIR-like interface.
(This change also exposes the floating-point atomic add intrinsic.)
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D122765
Currently, the sequence of Transform dialect operations only supports a single
use of each operand (verified by the `transform.sequence` operation). This was
originally motivated by the need to guard against accessing a payload IR
operation associated with a transform IR value after this operation has likely
been rewritten by a transformation. However, not all Transform dialect
operations rewrite payload IR, in particular the "navigation" operation such as
`transform.pdl_match` do not.
Introduce memory effects to the Transform dialect operations to describe their
effect on the payload IR and the mapping between payload IR opreations and
transform IR values. Use these effects to replace the single-use rule, allowing
repeated reads and disallowing use-after-free, where operations with the "free"
effect are considered to "consume" the transform IR value and rewrite the
corresponding payload IR operations). As an additional improvement, this
enables code motion transformation on the transform IR itself.
Reviewed By: Mogball
Differential Revision: https://reviews.llvm.org/D124181
Add shape func op for use (primarily) in shape function_library op. Allows
setting default dialect for some simpler authoring. This is a minimal version
of the ops needed.
Differential Revision: https://reviews.llvm.org/D124055
* Move Module Bufferization to the bufferization dialect. The implementation is split into `OneShotModuleBufferize.cpp` and `FuncBufferizableOpInterfaceImpl.cpp`, so that the external model implementation can be easily moved to the func dialect in the future.
* Split and clean up test cases. A few test cases are still remaining in Linalg and will be updated separately.
* `linalg.inplaceable` is renamed to `bufferization.writable` to accurately reflect its current usage.
* Attributes and their verifiers are moved from the Linalg dialect to the Bufferization dialect.
* Expand documentation.
* Add a new flag to One-Shot Bufferize to allow for function boundary bufferization.
Differential Revision: https://reviews.llvm.org/D122229
This introduces a pair of ops to the Transform dialect that connect it to PDL
patterns. Transform dialect relies on PDL for matching the Payload IR ops that
are about to be transformed. For this purpose, it provides a container op for
patterns, a "pdl_match" op and transform interface implementations that call
into the pattern matching infrastructure.
To enable the caching of compiled patterns, this also provides the extension
mechanism for TransformState. Extensions allow one to store additional
information in the TransformState and thus communicate it between different
Transform dialect operations when they are applied. They can be added and
removed when applying transform ops. An extension containing a symbol table in
which the pattern names are resolved and a pattern compilation cache is
introduced as the first client.
Depends On D123664
Reviewed By: Mogball
Differential Revision: https://reviews.llvm.org/D124007
The legacy passes are deprecated now and would be removed in near
future. This patch tries to remove legacy passes in coroutines.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D123918
Sequence is an important transform combination primitive that just indicates
transform ops being applied in a row. The simplest version requires fails
immediately if any transformation in the sequence fails. Introducing this
operation allows one to start placing transform IR within other IR.
Depends On D123135
Reviewed By: Mogball, rriddle
Differential Revision: https://reviews.llvm.org/D123664
This dialect provides operations that can be used to control transformation of
the IR using a different portion of the IR. It refers to the IR being
transformed as payload IR, and to the IR guiding the transformation as
transform IR.
The main use case for this dialect is orchestrating fine-grain transformations
on individual operations or sets thereof. For example, it may involve finding
loop-like operations with specific properties (e.g., large size) in the payload
IR, applying loop tiling to those and only those operations, and then applying
loop unrolling to the inner loops produced by the previous transformations. As
such, it is not intended as a replacement for the pass infrastructure, nor for
the pattern rewriting infrastructure. In the most common case, the transform IR
will be processed and applied to payload IR by a pass. Transformations
expressed by the transform dialect may be implemented using the pattern
infrastructure or any other relevant MLIR component.
This dialect is designed to be extensible, that is, clients of this dialect are
allowed to inject additional operations into this dialect using the newly
introduced in this patch `TransformDialectExtension` mechanism. This allows the
dialect to avoid a dependency on the implementation of the transformation as
well as to avoid introducing dialect-specific transform dialects.
See https://discourse.llvm.org/t/rfc-interfaces-and-dialects-for-precise-ir-transformation-control/60927.
Reviewed By: nicolasvasilache, Mogball, rriddle
Differential Revision: https://reviews.llvm.org/D123135
Move the operations that correspond to LLVM IR intrinsics in a separate .td
file. This makes it easier to maintain the intrinsics and decreases the compile
time of LLVMDialect.cpp by ~25%.
Depends On D123310
Reviewed By: wsmoses, jacquesguan
Differential Revision: https://reviews.llvm.org/D123315
Adding annotations on as-needed bases, currently only for memrefCopy, but in general all C API functions that take pointers to memory allocated/initialized inside the jit-compiled code must be annotated, to be able to run with msan.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D123557
(With C++ exceptions, `clang++ --target=mips64{,el}-linux-gnu -fpie -pie
-fuse-ld=lld` has link errors (lld does not implement some strange R_MIPS_64
.eh_frame handling in GNU ld). However, sanitizer-x86_64-linux-qemu used this to
build ScudoUnitTests. Pined ScudoUnitTests to -no-pie.)
Default the option introduced in D113372 to ON to match all(?) major Linux
distros. This matches GCC and improves consistency with Android and linux-musl
which always default to PIE.
Note: CLANG_DEFAULT_PIE_ON_LINUX may be removed in the future.
Differential Revision: https://reviews.llvm.org/D120305
Putting __support/FPUtil/x86_64/FMA.h in `hdrs` will trigger a
compilation action for that header, and it will always `#error` out for
non-FMA targets. Move these platform-specific headers that are
conditionally included to `textual_hdrs` instead.
Make FMA flag checks more accurate for x86-64 targets, and refactor
polyeval to use multiply and add instead when FMA instructions are not
available.
Reviewed By: michaelrj, sivachandra
Differential Revision: https://reviews.llvm.org/D123335
(The upgrade of the ppc64le bot and D121257 have fixed compiler-rt failures. Tested by nemanjai.)
Default the option introduced in D113372 to ON to match all(?) major Linux
distros. This matches GCC and improves consistency with Android and linux-musl
which always default to PIE.
Note: CLANG_DEFAULT_PIE_ON_LINUX may be removed in the future.
Differential Revision: https://reviews.llvm.org/D120305
Or rather, error out if it is set to something other than ON. This
removes the ability to enable the legacy pass manager by default,
but does not remove the ability to explicitly enable it through
various flags like -flegacy-pass-manager or -enable-new-pm=0.
I checked, and our test suite definitely doesn't pass with
LLVM_ENABLE_NEW_PASS_MANAGER=OFF anymore.
Differential Revision: https://reviews.llvm.org/D123126
Apply scale should be optionally disabled when lowering via TosaToStandard.
In most cases it should persist until the lowering to specific backend.
Reviewed By: jpienaar
Differential Revision: https://reviews.llvm.org/D122948
Pass the padding options using arrays instead of lambdas. In particular pass the padding value as string and use the argument parser to create the padding value. Arrays are a more natural choice that matches the current use cases and avoids converting arrays to lambdas.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D122309
These dialects have Python bindings and are tested, but were not
previously exposed through Bazel filegroups.
Differential Revision: https://reviews.llvm.org/D122138
This did not show up as build error because the build also works if the
dependency is transitively available. But there should be a direct
dependency anyway.
Prior to this change the __support_cpp_array_ref target's only dependency was libc_root.
but it #includes "TypeTraits.h" and Array.h for that matter.
These dependencies matter when building in distributed build systems and the relevant
files must be know for the distributed build to ship them to the executor.
Differential Revision: https://reviews.llvm.org/D121974
This binary is used in LIT tests.
Test: `bazel run --config=generic_clang -c opt @llvm-project//llvm:llvm-remark-size-diff -- --help`
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D121742
previously the support_standalone_cpp target contained all of the files
in the __support/cpp folder. This change splits these out so that only
what is needed is included. In addition, this change adds the new
support files that previously didn't have targets.
Reviewed By: lntue, gchatelet
Differential Revision: https://reviews.llvm.org/D121314
This improves the modularity of the bufferization.
From now on, all ops that do not implement BufferizableOpInterface are considered hoisting barriers. Previously, all ops that do not implement the interface were not considered barriers and such ops had to be marked as barriers explicitly. This was unsafe because we could've hoisted across unknown ops where it was not safe to hoist.
As a side effect, this allows for cleaning up AffineBufferizableOpInterfaceImpl. This build unit no longer needed and can be deleted.
Differential Revision: https://reviews.llvm.org/D121519
Add support for translating data layout specifications for integer and float
types between MLIR and LLVM IR. This is a first step towards removing the
string-based LLVM dialect data layout attribute on modules. The latter is still
available and will remain so until the first-class MLIR modeling can fully
replace it.
Depends On D120739
Reviewed By: wsmoses
Differential Revision: https://reviews.llvm.org/D120740
Krzysztof Drewniak