This mirrors what we already do for AArch64 as the cores are similar.
As discussed in the review, enabling the machine scheduler causes
more variations in performance changes so it is not enabled for now.
This patch improves LNT scores by a geomean of 1.57% at -O3.
Differential Revision: https://reviews.llvm.org/D53562
llvm-svn: 345272
Using a multiclass reduces duplication, and makes it easier to add new patterns
later. This refactoring does add some new patterns, but as far as I can tell
there's no IR that will end up triggering them so this is effectively NFC.
Differential Revision: https://reviews.llvm.org/D53580
llvm-svn: 345271
Currently a vector move of 0 or -1 will use different instructions depending on
the size of the vector. Using a single instruction (the 128-bit one) for both
gives more opportunity for Machine CSE to eliminate instructions.
Differential Revision: https://reviews.llvm.org/D53579
llvm-svn: 345270
Summary:
If the instruction in the eliminateFrameIndex function is a DBG_VALUE
instruction, it requires special processing. The frame register is set
to VRFrame and the offset is based on the object offset.
The code is similar to the code used in
lib/CodeGen/PrologEpilogInserter.cpp.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D53657
llvm-svn: 345269
Summary:
To enable this, TUScheduler has to provide a way to run async tasks without
needing a preamble or AST!
Reviewers: ilya-biryukov
Subscribers: javed.absar, ioeric, MaskRay, jkorous, arphaman, jfb, kadircet, cfe-commits
Differential Revision: https://reviews.llvm.org/D53644
llvm-svn: 345268
The current state of the llc invocation is:
* Running all the passes from dwarfehprepare to stack coloring
(included)
* It runs it from the LLVM IR included in the file
* It *ADDS* the generated MI from ISel to the MI in the MIR file
* The machine verifier doesn't like it.
Differential Revision: https://reviews.llvm.org/D53698
llvm-svn: 345266
Summary:
This function was performing two hash lookups when a new struct type was requested: first checking if it exists and second to insert it. This patch updates the function to perform a single hash lookup in this case by updating the value in the hash table in-place in case the struct type was not there before.
Similar to r345151.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53689
llvm-svn: 345264
Summary:
When building with -fvisibility=hidden, some symbols do not get exported from
libc++.dylib. This means that some entities are not explicitly given default
visibility in the source code, and that we rely on the fact -fvisibility=default
is the default. This commit explicitly gives default visibility to those
symbols to avoid being dependent on the command line flags used.
The commit also remove symbols from the dylib -- those symbols do not
actually need to be exported from the dylib and this should not be an
ABI break.
Finally, in the future, we may want to mark the whole std:: namespace as
having hidden visibility (to switch from opt-out to opt-in), in which
case the changes done in this commit will be required.
Reviewers: EricWF
Subscribers: mgorny, christof, dexonsmith, libcxx-commits
Differential Revision: https://reviews.llvm.org/D52662
llvm-svn: 345260
MicrosoftExt allows explicit constructor calls. Prevent lookup of constructor name unless the name has explicit scope.
This avoids a compile-time crash due to confusing a member access for a constructor name.
Test case included. All tests pass.
Differential Revision: https://reviews.llvm.org/D53441
llvm-svn: 345258
As suggested on D52965, this patch moves the i64 to f64 UINT_TO_FP expansion code from LegalizeDAG into TargetLowering and makes it available to LegalizeVectorOps as well.
Not only does this help perform X86 lowering as a true vectorization instead of (partially vectorized) scalar conversions, it avoids the HADDPD op from the scalar code which can be slow on most targets.
The AVX512F does have the vcvtusi2sdq scalar operation but we don't unroll to use it as it seems to only help for the v2f64 case - otherwise the unrolling cost will certainly be too high. My feeling is that we should leave it to the vectorizers - and if it generates the vector UINT_TO_FP we should use it.
Differential Revision: https://reviews.llvm.org/D53649
llvm-svn: 345256
As was already mentioned in comments for D53364, DWARF 5
spec says about DW_LLE_startx_length:
"This is a form of bounded location description that has two unsigned ULEB operands.
The first value is an address index (into the .debug_addr section) that indicates the beginning of the address range
over which the location is valid. The second value is the length of the range. ")
Currently, the length is always parsed as U32.
Patch change the behavior to parse DW_LLE_startx_length as ULEB128 for DWARF 5
and keeps it as U32 for DWARF4+(pre-DWARF5) for compatibility.
Differential revision: https://reviews.llvm.org/D53564
llvm-svn: 345254
I noticed while fixing PR39368 that we don't have generic shuffle costs for broadcast style shuffles.
This patch adds SK_BROADCAST handling, but exposes ARM/AARCH64 lack of handling of this type, which I've added a fix for at the same time.
Differential Revision: https://reviews.llvm.org/D53570
llvm-svn: 345253
With the fix: do not forget to hanlde the DW_RLE_start_end, which seems was
omited/forgotten/removed by mistake.
Original commit message:
The patch implements the support for DW_RLE_base_address and DW_RLE_offset_pair
.debug_rnglists entries
Differential revision: https://reviews.llvm.org/D53140
----
Added : /lldb/trunk/lit/Breakpoint/Inputs/debug_rnglist_offset_pair.yaml
Added : /lldb/trunk/lit/Breakpoint/debug_rnglist_offset_pair.test
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/DWARFDebugInfoEntry.cpp
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/DWARFDebugRanges.cpp
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/DWARFDebugRanges.h
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.h
llvm-svn: 345251
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53287
llvm-svn: 345250
Currently, we always parse the length field of DW_LLE_startx_length entry as U32.
That is correct for pre-standard definition:
https://gcc.gnu.org/wiki/DebugFission - "A start/length entry contains one unsigned LEB128 number
and a 4-byte unsigned value (as would be represented by the form code DW_FORM_const4u). The first
number is an index into the .debug_addr section that selects the beginning offset, and the second
number is the length of the range. ")
But DWARF v5 says: "This is a form of bounded location description that has two unsigned ULEB operands.
The first value is an address index (into the .debug_addr section) that indicates the beginning of the address
range over which the location is valid. The second value is the length of the range."
Fortunately, we can easily handle the difference. No test case because it seems impossible to test
until we will be ready to use DWARF v5 in tests that need to run the executables.
Differential revision: https://reviews.llvm.org/D53646
llvm-svn: 345249
Summary:
The pfm counters are now in the ExegesisTarget rather than the
MCSchedModel (PR39165).
This also compresses the pfm counter tables (PR37068).
Reviewers: RKSimon, gchatelet
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D52932
llvm-svn: 345243
Summary:
Currently clang-format breaks before the next parameter after multiline parameters (also recursively for the parent expressions of multiline parameters). However, it fails to do so for formatted multiline raw string literals:
```
$ cat test.cc
// Examples
// Regular multiline tokens
int x = f(R"(multi
line)", 2);
}
int y = g(h(R"(multi
line)"), 2);
// Formatted multiline tokens
int z = f(R"pb(multi: 1 #
line: 2)pb", 2);
int w = g(h(R"pb(multi: 1 #
line: 2)pb"), 2);
$ clang-format -style=google test.cc
// Examples
// Regular multiline tokens
int x = f(R"(multi
line)",
2);
}
int y = g(h(R"(multi
line)"),
2);
// Formatted multiline tokens
int z = f(R"pb(multi: 1 #
line: 2)pb", 2);
int w = g(h(R"pb(multi: 1 #
line: 2)pb"), 2);
```
This patch addresses this inconsistency by forcing breaking after multiline formatted raw string literals. This requires a little tweak to the indentation chosen for the contents of a formatted raw string literal: in case when that's a parameter and not the last one, the indentation is based off of the uniform indentation of all of the parameters.
Reviewers: sammccall
Reviewed By: sammccall
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D52448
llvm-svn: 345242
Multiply a is complex operation so just because some bit of the output isn't used doesn't mean that bit of the input isn't used.
We might able to bound it, but it will require some more thought.
llvm-svn: 345241
GNU readelf tool prints hex value of the ELF header flags field and the
flags names. This change adds the same functionality to llvm-readobj.
Now llvm-readobj can print MIPS and RISCV flags.
New GNUStyle::printFlags() method is a copy of ScopedPrinter::printFlags()
routine. Probably we can escape code duplication and / or simplify the
printFlags() method. But it's a task for separate commit.
Differential revision: https://reviews.llvm.org/D52027
llvm-svn: 345238
The X86 backend will need to see the attribute to make decisions. If it isn't present the backend will have to assume large vectors may be present.
llvm-svn: 345237
- align struct names/comments with LSP, remove redundant "clangd" prefixes.
- don't map config structs as Optional<> when their presence/absence
doesn't signal anything and all fields must have sensible "absent" values
- be more lax around parsing of 'any'-typed messages
llvm-svn: 345235
Summary:
It doesn't make much sense: setting them is not coupled to opening the file,
it's an asynchronous notification.
I don't think this is a breaking change - this behavior is hard to observe!
Reviewers: ilya-biryukov
Subscribers: ioeric, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Differential Revision: https://reviews.llvm.org/D53642
llvm-svn: 345231
Summary: Fixes part of the problem reported in bug 39275.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D53542
llvm-svn: 345230
There is a small difference in the scope flags for C89 versus the other C/C++
dialects. This change ensures that the -Wcomma warning won't be duplicated or
issued in the wrong location. Also, the test case is refactored into C and C++
parts, with the C++ parts guarded by a #ifdef to allow the test to run in both
modes.
https://bugs.llvm.org/show_bug.cgi?id=32370
llvm-svn: 345228
This makes the offsets larger (since they are further from the base
address) but those are in the .dwo - and allows removing addresses and
relocations from the .o file.
This could be built into the AddressPool more fundamentally, perhaps -
when you ask for an AddressPool entry you could say "or give me some
other entry and an offset I need to use" - though what to do about
situations where the first use of an address in a section is not the
earliest address in that section... is tricky.
At least with range addresses we can be fairly sure we've seen the
earliest address first because we see the start address for the
function.
llvm-svn: 345224
Summary:
Currently when assigning depths 'rethrow' does not take the whole
control flow stack into accounts but only considers EH pad stacks. When
assigning depth immmediates to rethrows, in normal cases it is done
correctly but when a rethrow instruction throws up to a caller, i.e., we
convert a pseudo RETHROW_TO_CALLER instruction to a rethrow, it
mistakenly compute the whole stack depth.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D53619
llvm-svn: 345223
Sam Parker