Tests to follow.
PIC with small code model and EH frame handling will not work with multiple modules. There are also some rough edges to be smoothed out for remote target support.
llvm-svn: 191722
Inspired by the object from the SLPVectorizer. This found a minor bug in the
debug loc restoration in the vectorizer where the location of a following
instruction was attached instead of the location from the original instruction.
llvm-svn: 191673
For targets that have instruction itineraries this means no change. Targets
that move over to the new schedule model will use be able the new schedule
module for instruction latencies in the if-converter (the logic is such that if
there is no itineary we will use the new sched model for the latencies).
Before, we queried "TTI->getInstructionLatency()" for the instruction latency
and the extra prediction cost. Now, we query the TargetSchedule abstraction for
the instruction latency and TargetInstrInfo for the extra predictation cost. The
TargetSchedule abstraction will internally call "TTI->getInstructionLatency" if
an itinerary exists, otherwise it will use the new schedule model.
ATTENTION: Out of tree targets!
(I will also send out an email later to LLVMDev)
This means, if your target implements
unsigned getInstrLatency(const InstrItineraryData *ItinData,
const MachineInstr *MI,
unsigned *PredCost);
and returns a value for "PredCost", you now also need to implement
unsigned getPredictationCost(const MachineInstr *MI);
(if your target uses the IfConversion.cpp pass)
radar://15077010
llvm-svn: 191671
No functionality change. Future patches will add analysis which will be used
in other passes (PEI, StackSlot). The end goal is to support ssp-strong stack
layout rules.
WIP.
Differential Revision: http://llvm-reviews.chandlerc.com/D1521
llvm-svn: 191570
This is a patch to add capability to llvm-objdump to dump COFF Import Table
entries, so that we can write tests for LLD checking Import Table contents.
llvm-objdump did not print anything but just file name if the format is COFF
and -private-headers option is given. This is a patch adds capability for
dumping DLL Import Table, which is specific to the COFF format.
In this patch I defined a new iterator to iterate over import table entries.
Also added a few functions to COFFObjectFile.cpp to access fields of the entry.
Differential Revision: http://llvm-reviews.chandlerc.com/D1719
llvm-svn: 191472
Ideally, the machinel model is added at the time the instructions are
defined. But many instructions in X86InstrSSE.td still need a model.
Without this workaround the scheduler asserts because x86 already has
itinerary classes for these instructions, indicating they should be
modeled by the scheduler. Since we use the new machine model for other
instructions, it expects a new machine model for these too.
llvm-svn: 191391
The binutils assembler supports a mode called DOLLAR_DOT which treats
the dollar sign token as a reference to the current program counter if
the dollar sign doesn't precede a constant or identifier.
This commit adds a new MCAsmInfo flag stating whether or not a given
target supports this interpretation of the dollar sign token; by
default, this flag is not enabled.
Further, enable this flag for PPC. The system assembler for AIX and
binutils both support using the dollar sign in this manner.
This fixes PR17353.
llvm-svn: 191368
This is safe per C++11 18.6.1.1p3: [operator new returns] a non-null pointer to
suitably aligned storage (3.7.4), or else throw a bad_alloc exception. This
requirement is binding on a replacement version of this function.
Brings us a tiny bit closer to eliminating more vector push_backs.
llvm-svn: 191310
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
llvm-svn: 191263
The underlying type of all plain enums in MSVC is 'int', even if the
enumerator contains large 32-bit unsigned values or values greater than
UINT_MAX. The only way to get a large or unsigned enum type is to
request it explicitly with the C++11 strong enum types feature.
However, since LLVM isn't C++11 yet, I had to add a conditional
LLVM_ENUM_INT_TYPE to Compiler.h to control its usage.
The motivating true positive for this change is compiling PointerIntPair
with MSVC for win64. The PointerIntMask value is supposed to be pointer
sized value of all ones with some low zeros. Instead, it's truncated to
32-bits! We are only saved later because it is sign extended back in
the AND with int64_t, and we happen to want all ones.
This silences lots of -Wmicrosoft warnings during a clang self-host
targeting Windows.
llvm-svn: 191241
Changes to MIPS SelectionDAG:
* Added nodes VEXTRACT_[SZ]EXT_ELT to represent extract and extend in a single
operation and implemented the DAG combines necessary to fold sign/zero
extends into the extract.
llvm-svn: 191199
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
llvm-svn: 191175
The global registry is used to allow command line override of the
scheduler selection, but does not work well as the normal selection
API. For example, the same LLVM process should be able to target
multiple targets or subtargets.
llvm-svn: 191071
Based on code review feedback from Eric Christopher, unshifting these
constants as they can appear in the gdb_index itself, shifted a further
24 bits. This means that keeping them preshifted is a bit inflexible, so
let's not do that.
Given the motivation, wrap up some nicer enums, more type safety, and
some utility functions.
llvm-svn: 191035
This avoids warnings when included in a application that
uses -Wstrict-prototypes.
Differential Revision: http://llvm-reviews.chandlerc.com/D1713
llvm-svn: 191029
This puts all the global PassManager debugging flags, like
-print-after-all and -time-passes, behind a managed static. This
eliminates their static initializers and, more importantly, exit-time
destructors.
The only behavioral change I anticipate is that tools need to
initialize the PassManager before parsing the command line in order to
export these options, which makes sense. Tools that already initialize
the standard passes (opt/llc) don't need to do anything new.
llvm-svn: 190974
Use the DIVariable::isIndirect() flag set by the frontend instead of
guessing whether to set the machine location's indirection bit.
Paired commit with CFE.
llvm-svn: 190961
Upcoming SLP vectorization improvements will want to be able to estimate costs
of horizontal reductions. Add infrastructure to support this.
We model reductions as a series of (shufflevector,add) tuples ultimately
followed by an extractelement. For example, for an add-reduction of <4 x float>
we could generate the following sequence:
(v0, v1, v2, v3)
\ \ / /
\ \ /
+ +
(v0+v2, v1+v3, undef, undef)
\ /
((v0+v2) + (v1+v3), undef, undef)
%rdx.shuf = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 2, i32 3, i32 undef, i32 undef>
%bin.rdx = fadd <4 x float> %rdx, %rdx.shuf
%rdx.shuf7 = shufflevector <4 x float> %bin.rdx, <4 x float> undef,
<4 x i32> <i32 1, i32 undef, i32 undef, i32 undef>
%bin.rdx8 = fadd <4 x float> %bin.rdx, %rdx.shuf7
%r = extractelement <4 x float> %bin.rdx8, i32 0
This commit adds a cost model interface "getReductionCost(Opcode, Ty, Pairwise)"
that will allow clients to ask for the cost of such a reduction (as backends
might generate more efficient code than the cost of the individual instructions
summed up). This interface is excercised by the CostModel analysis pass which
looks for reduction patterns like the one above - starting at extractelements -
and if it sees a matching sequence will call the cost model interface.
We will also support a second form of pairwise reduction that is well supported
on common architectures (haddps, vpadd, faddp).
(v0, v1, v2, v3)
\ / \ /
(v0+v1, v2+v3, undef, undef)
\ /
((v0+v1)+(v2+v3), undef, undef, undef)
%rdx.shuf.0.0 = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 0, i32 2 , i32 undef, i32 undef>
%rdx.shuf.0.1 = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 1, i32 3, i32 undef, i32 undef>
%bin.rdx.0 = fadd <4 x float> %rdx.shuf.0.0, %rdx.shuf.0.1
%rdx.shuf.1.0 = shufflevector <4 x float> %bin.rdx.0, <4 x float> undef,
<4 x i32> <i32 0, i32 undef, i32 undef, i32 undef>
%rdx.shuf.1.1 = shufflevector <4 x float> %bin.rdx.0, <4 x float> undef,
<4 x i32> <i32 1, i32 undef, i32 undef, i32 undef>
%bin.rdx.1 = fadd <4 x float> %rdx.shuf.1.0, %rdx.shuf.1.1
%r = extractelement <4 x float> %bin.rdx.1, i32 0
llvm-svn: 190876
Add llvm.x86.* intrinsics for all of the Intel SHA Extensions instructions, as
well as tests. Also remove mayLoad and hasSideEffects, which can be inferred
from the instruction patterns.
llvm-svn: 190864
If there are no legal integers, assume 1 byte.
This makes more sense than using the pointer size as
a guess for the maximum GPR width.
It is conceivable to want to use some 64-bit pointers
on a target where 64-bit integers aren't legal.
llvm-svn: 190817
This pass was based on the previous (essentially unused) profiling
infrastructure and the assumption that by ordering the basic blocks at
the IR level in a particular way, the correct layout would happen in the
end. This sometimes worked, and mostly didn't. It also was a really
naive implementation of the classical paper that dates from when branch
predictors were primarily directional and when loop structure wasn't
commonly available. It also didn't factor into the equation
non-fallthrough branches and other machine level details.
Anyways, for all of these reasons and more, I wrote
MachineBlockPlacement, which completely supercedes this pass. It both
uses modern profile information infrastructure, and actually works. =]
llvm-svn: 190748
This was somewhat tricky because ~PrettyStackTraceEntry() may run after
llvm_shutdown() has been called. This is rare and only happens for a common idiom
used in the main() functions of command-line tools. This works around the idiom by
skipping the stack clean-up if the PrettyStackTraceHead ManagedStatic is not
constructed (i.e. llvm_shutdown() has been called).
llvm-svn: 190730
versions of gold. This support is designed to allow gold to produce
gdb_index sections similar to the accelerator tables and consumable
by gdb.
llvm-svn: 190649
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
llvm-svn: 190598
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
llvm-svn: 190542
Definition of DIRef used to require the full definition of DIType because
of usage of DIType::isType in DIRef::resolve. We now use DIDescriptor::isType
instead to remove the requirement and move definition of DIRef before DIType.
With this, we can move the definition of DIType::getContext to the header
file.
llvm-svn: 190540
This reflects the common use case of nativizing a prepared path. The existing
version invokes undefined behavior if input = output, add an assert to catch
that case.
llvm-svn: 190510
In some cases (e.g. when a build system pipes stderr) the Windows console
API cannot be used to color output. For these, provide a way to switch to
ANSI escape codes. This is required for Clang's -fansi-escape-codes option.
llvm-svn: 190460
On Windows, character encoding of multibyte environment variable varies
depending on settings. The only reliable way to handle it I think is to use
GetEnvironmentVariableW().
GetEnvironmentVariableW() works on wchar_t string, which is on Windows UTF16
string. That's not ideal because we use UTF-8 as the internal encoding in LLVM.
This patch defines a wrapper function which takes and returns UTF-8 string for
GetEnvironmentVariableW().
The wrapper function does not do any conversion and just forwards the argument
to getenv() on Unix.
Differential Revision: http://llvm-reviews.chandlerc.com/D1612
llvm-svn: 190423
Specialize the constructors for DIRef<DIScope> and DIRef<DIType> to make sure
the Value is indeed a scope ref and a type ref.
Use DIScopeRef for DIScope::getContext and DIType::getContext and use DITypeRef
for getContainingType and getClassType.
DIScope::generateRef now returns a DIScopeRef instead of a "Value *" for
readability and type safety.
llvm-svn: 190418
This partially reverts r190330. DIScope::getContext now returns DIScopeRef
instead of DIScope. We construct a DIScopeRef from DIScope when we are
dealing with subprogram, lexical block or name space.
llvm-svn: 190362
There are more than one paths to where the frame information is emitted. Place
the call to generateCompactUnwindEncodings() into the method which outputs the
frame information, thus ensuring that the encoding is there for every path. This
involved threading the MCAsmBackend object through to this method.
<rdar://problem/13623355>
llvm-svn: 190335
In DIBuilder, the context field of a TAG_member is updated to use the
scope reference. Verifier is updated accordingly.
DebugInfoFinder now needs to generate a type identifier map to have
access to the actual scope. Same applies for BreakpointPrinter.
processModule of DebugInfoFinder is called during initialization phase
of the verifier to make sure the type identifier map is constructed early
enough.
We are now able to unique a simple class as demonstrated by the added
testing case.
llvm-svn: 190334
DIScope::getContext is a wrapper function that calls the specific getContext
method on each subclass. When we switch DIType::getContext to return DIScopeRef
instead of DIScope, DIScope::getContext can no longer return a DIScope without
a type identifier map.
DIScope::getContext is only used by DwarfDebug, so we move it to DwarfDebug
to have easy access to the type identifier map.
llvm-svn: 190330
The work on this project was left in an unfinished and inconsistent state.
Hopefully someone will eventually get a chance to implement this feature, but
in the meantime, it is better to put things back the way the were. I have
left support in the bitcode reader to handle the case-range bitcode format,
so that we do not lose bitcode compatibility with the llvm 3.3 release.
This reverts the following commits: 155464, 156374, 156377, 156613, 156704,
156757, 156804 156808, 156985, 157046, 157112, 157183, 157315, 157384, 157575,
157576, 157586, 157612, 157810, 157814, 157815, 157880, 157881, 157882, 157884,
157887, 157901, 158979, 157987, 157989, 158986, 158997, 159076, 159101, 159100,
159200, 159201, 159207, 159527, 159532, 159540, 159583, 159618, 159658, 159659,
159660, 159661, 159703, 159704, 160076, 167356, 172025, 186736
llvm-svn: 190328
This helper function needs the type identifier map when we switch
DIType::getContext to return DIScopeRef instead of DIScope.
Since isSubprogramContext is used by DwarfDebug only, We move it to DwarfDebug
to have easy access to the map.
llvm-svn: 190325
A reference to a scope is more general than a reference to a type since
DIType is a subclass of DIScope.
A reference to a type can be either an identifier for the type or
the DIType itself, while a reference to a scope can be either an
identifier for the type (when the scope is indeed a type) or the
DIScope itself. A reference to a type and a reference to a scope
will be resolved in the same way. The only difference is in the
verifier when a field is a reference to a type (i.e. the containing
type field of a DICompositeType) or a field is a reference to a scope
(i.e. the context field of a DIType).
This is to get ready for switching DIType::getContext to return
DIScopeRef instead of DIScope.
Tighten up isTypeRef and isScopeRef to make sure the identifier is not
empty and the MDNode is DIType for TypeRef and DIScope for ScopeRef.
llvm-svn: 190322
We used to generate the compact unwind encoding from the machine
instructions. However, this had the problem that if the user used `-save-temps'
or compiled their hand-written `.s' file (with CFI directives), we wouldn't
generate the compact unwind encoding.
Move the algorithm that generates the compact unwind encoding into the
MCAsmBackend. This way we can generate the encoding whether the code is from a
`.ll' or `.s' file.
<rdar://problem/13623355>
llvm-svn: 190290
instead of having its own implementation.
The implementation of isTBAAVtableAccess is in TypeBasedAliasAnalysis.cpp
since it is related to the format of TBAA metadata.
The path for struct-path tbaa will be exercised by
test/Instrumentation/ThreadSanitizer/read_from_global.ll, vptr_read.ll, and
vptr_update.ll when struct-path tbaa is on by default.
llvm-svn: 190216
of DIType.
Implement DIType::generateRef to return a type reference. This function will be
used in setContaintingType and in DIBuilder to generete the type reference.
No functionality change.
llvm-svn: 190188
Allow subtargets to customize the generic scheduling strategy.
This is convenient for targets that don't need to add new heuristics
by specializing the strategy.
llvm-svn: 190176
ptr_to_member.
We introduce a new class DITypeRef that represents a reference to a DIType.
It wraps around a Value*, which can be either an identifier in MDString
or an actual MDNode. The class has a helper function "resolve" that
finds the actual MDNode for a given DITypeRef.
We specialize getFieldAs to return a field that is a reference to a
DIType. To correctly access the base type field of ptr_to_member,
getClassType now calls getFieldAs<DITypeRef> to return a DITypeRef.
Also add a typedef for DITypeIdentifierMap and a helper
generateDITypeIdentifierMap in DebugInfo.h. In DwarfDebug.cpp, we keep
a DITypeIdentifierMap and call generateDITypeIdentifierMap to actually
populate the map.
Verifier is updated accordingly.
llvm-svn: 190081
If the instruction window is < NumRegs/2, pressure tracking is not
likely to be effective. The scheduler has to process a very large
number of tiny blocks. We want this to be fast.
llvm-svn: 189991
Register pressure tracking is half the complexity of the
scheduler. It's useful to be able to turn it off for compile time and
performance comparisons.
llvm-svn: 189987
This reverts commit r189886.
I found a corner case where this optimization is not valid:
Say we have a "linkonce_odr unnamed_addr" in two translation units:
* In TU 1 this optimization kicks in and makes it hidden.
* In TU 2 it gets const merged with a constant that is *not* unnamed_addr,
resulting in a non unnamed_addr constant with default visibility.
* The static linker rules for combining visibility them produce a hidden
symbol, which is incorrect from the point of view of the non unnamed_addr
constant.
The one place we can do this is when we know that the symbol is not used from
another TU in the same shared object, i.e., during LTO. I will move it there.
llvm-svn: 189954
Summary:
This is needed so we can use generic columnWidthUTF8 in clang-format on
win32 simultaneously with a separate system-dependent implementations of
isPrint/columnWidth in TextDiagnostic.cpp to avoid attempts to print Unicode
characters using narrow-character interfaces (which is not supported on Windows,
and we'll have to figure out how to handle this).
Reviewers: jordan_rose
Reviewed By: jordan_rose
CC: llvm-commits, klimek
Differential Revision: http://llvm-reviews.chandlerc.com/D1559
llvm-svn: 189952
Original message:
If a constant or a function has linkonce_odr linkage and unnamed_addr, mark
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
llvm-svn: 189886
This changes the SelectionDAG nodes from ISD::INTRINSIC_W_CHAIN to
ISD::INTRINSIC_WO_CHAIN which enables easy lowering to equivalent SelectionDAG
nodes (e.g. __builtin_msa_sub_w -> ISD::SUB) in future patches since nodes
such as ISD::SUB do not have a chain.
It also corrects an obvious mistake, namely that the subtract intrinsics were
marked as being commutative.
As per a similar change in r189106
(http://llvm.org/viewvc/llvm-project?rev=189106&view=rev) there isn’t a new
testcase in this patch since the existing tests should test the intrinsics to
the same standard and the best I can do for a testcase would be a fragile
pass/maybe test of whether memory operations can (and do) cross the intrinsic.
llvm-svn: 189784
This changes the SelectionDAG nodes from ISD::INTRINSIC_W_CHAIN to
ISD::INTRINSIC_WO_CHAIN which enables easy lowering to equivalent SelectionDAG
nodes (e.g. __builtin_msa_fadd_w -> ISD::FADD) in future patches since nodes
such as ISD::FADD do not have a chain.
As per a similar change in r189106
(http://llvm.org/viewvc/llvm-project?rev=189106&view=rev) there isn’t a new
testcase in this patch since the existing tests should test the intrinsics to
the same standard and the best I can do for a testcase would be a fragile
pass/maybe test of whether memory operations can (and do) cross the intrinsic.
llvm-svn: 189782
- We do some nasty things w.r.t. installing or overriding signal handlers in
order to improve our crash recovery support or interaction with crash
reporting software, and those things are not necessarily appropriate when
LLVM is being linked into a client application that has its own ideas about
how to do things. This gives those clients a way to disable that handling at
build time.
- Currently, the code this guards is all Apple specific, but other platforms
might have the same concerns so I went for a more generic configure
name. Someone who is more familiar with library embedding on Windows can
handle choosing which of the Windows/Signals.inc behaviors might make sense
to go under this flag.
- This also fixes the proper autoconf'ing of ENABLE_BACKTRACES. The code
expects it to be undefined when disabled, but the autoconf check was just
defining it to 0.
llvm-svn: 189694
Created SUPressureDiffs array to hold the per node PDiff computed during DAG building.
Added a getUpwardPressureDelta API that will soon replace the old
one. Compute PressureDelta here from the precomputed PressureDiffs.
Updating for liveness will come next.
llvm-svn: 189640
createClassType, createStructType, createUnionType, createEnumerationType,
and createForwardDecl will retain a type when created with a unique identifier,
to make sure they are treated as used even when all uses are replaced with
the identifiers.
Use TrackingVH<MDNode> instead of MDNode in AllRetainTypes, since the created
node can later be updated.
The change will be tested when clients of DIBuilder start to pass in non-empty
unique identifier.
llvm-svn: 189621
include/llvm/Support/UnicodeCharRanges.h:56:5: error:
use of this statement in a constexpr constructor is a C++1y extension
[-Werror,-Wc++1y-extensions]
assert(rangesAreValid());
^
llvm-svn: 189599
Summary:
Made UnicodeCharSet a class, perform validity checking inside its
constructor instead of each isCharInSet call, use std::binary_search instead of
own implementation.
This patch comes with a necessary change in clang (sent separately).
Reviewers: jordan_rose, klimek
Reviewed By: klimek
CC: cfe-commits, rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D1534
llvm-svn: 189582
Revert unintentional commit (of an unreviewed change).
Original commit message:
Add getUnrollingPreferences to TTI
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
llvm-svn: 189566
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
llvm-svn: 189565
There are several optional (off-by-default) features in CodeGen that can make
use of alias analysis. These features are important for generating code for
some kinds of cores (for example the (in-order) PPC A2 core). This adds a
useAA() function to TargetSubtargetInfo to allow these features to be enabled
by default on a per-subtarget basis.
Here is the first use of this function: To control the default of the
-enable-aa-sched-mi feature.
llvm-svn: 189563
When unrolling is disabled in the pass manager, the loop vectorizer should also
not unroll loops. This will allow the -fno-unroll-loops option in Clang to
behave as expected (even for vectorizable loops). The loop vectorizer's
-force-vector-unroll option will (continue to) override the pass-manager
setting (including -force-vector-unroll=0 to force use of the internal
auto-selection logic).
In order to test this, I added a flag to opt (-disable-loop-unrolling) to force
disable unrolling through opt (the analog of -fno-unroll-loops in Clang). Also,
this fixes a small bug in opt where the loop vectorizer was enabled only after
the pass manager populated the queue of passes (the global_alias.ll test needed
a slight update to the RUN line as a result of this fix).
llvm-svn: 189499
These intrinsics are legalized to V(ALL|ANY)_(NON)?ZERO nodes,
are matched as SN?Z_[BHWDV]_PSEUDO pseudo's, and emitted as
a branch/mov sequence to evaluate to 0 or 1.
Note: The resulting code is sub-optimal since it doesnt seem to be possible
to feed the result of an intrinsic directly into a brcond. At the moment
it uses (SETCC (VALL_ZERO $ws), 0, SETEQ) and similar which unnecessarily
evaluates the boolean twice.
llvm-svn: 189478
The MSA control registers have been added as reserved registers,
and are only used via ISD::Copy(To|From)Reg. The intrinsics are lowered
into these nodes.
llvm-svn: 189468
The problem with having DefaultSlabAllocator being a global static is that it is undefined if BumpPtrAllocator
will be usable during global initialization because it is not guaranteed that DefaultSlabAllocator will be
initialized before BumpPtrAllocator is created and used.
llvm-svn: 189433
Link.exe's command line options are case-insensitive. This patch
adds a new attribute to OptTable to let the option parser to compare
options, ignoring case.
Command lines are generally case-insensitive on Windows. CL.exe is an
exception. So this new attribute should be useful for other commands
running on Windows.
Differential Revision: http://llvm-reviews.chandlerc.com/D1485
llvm-svn: 189416
createClassType, createStructType, createUnionType, createEnumerationType,
and createForwardDecl will take an optional StringRef to pass in
the unique identifier.
llvm-svn: 189410
----
Add new API lto_codegen_compile_parallel().
This API is proposed by Nick Kledzik. The semantic is:
--------------------------------------------------------------------------
Generate code for merged module into an array of native object files. On
success returns a pointer to an array of NativeObjectFile. The count
parameter returns the number of elements in the array. Each element is
a pointer/length for a generated mach-o/ELF buffer. The buffer is owned
by the lto_code_gen_t and will be freed when lto_codegen_dispose() is called,
or lto_codegen_compile() is called again. On failure, returns NULL
(check lto_get_error_message() for details).
extern const struct NativeObjectFile*
lto_codegen_compile_parallel(lto_code_gen_t cg, size_t *count);
---------------------------------------------------------------------------
This API is currently only called on OSX platform. Linux or other Unixes
using GNU gold are not supposed to call this function, because on these systems,
object files are fed back to linker via disk file instead of memory buffer.
In this commit, lto_codegen_compile_parallel() simply calls
lto_codegen_compile() to return a single object file. In the near future,
this function is the entry point for compilation with partition. Linker can
blindly call this function even if partition is turned off; in this case,
compiler will return only one object file.
llvm-svn: 189386
Summary:
1) Make llvm-symbolizer properly symbolize
files with split debug info (by using stanalone .dwo files).
2) Make DWARFCompileUnit parse and store corresponding .dwo file,
if necessary.
3) Make bits of DWARF parsing more CompileUnit-oriented.
Reviewers: echristo
Reviewed By: echristo
CC: bkramer, llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1164
llvm-svn: 189329
Right now we have two headers for the Mach-O format. I'd like to get rid
of one. Since the other object formats are all in Support, I chose to
keep the Mach-O header in Support, and discard the other one.
llvm-svn: 189314
This API is proposed by Nick Kledzik. The semantic is:
--------------------------------------------------------------------------
Generate code for merged module into an array of native object files. On
success returns a pointer to an array of NativeObjectFile. The count
parameter returns the number of elements in the array. Each element is
a pointer/length for a generated mach-o/ELF buffer. The buffer is owned
by the lto_code_gen_t and will be freed when lto_codegen_dispose() is called,
or lto_codegen_compile() is called again. On failure, returns NULL
(check lto_get_error_message() for details).
extern const struct NativeObjectFile*
lto_codegen_compile_parallel(lto_code_gen_t cg, size_t *count);
---------------------------------------------------------------------------
This API is currently only called on OSX platform. Linux or other Unixes
using GNU gold are not supposed to call this function, because on these systems,
object files are fed back to linker via disk file instead of memory buffer.
In this commit, lto_codegen_compile_parallel() simply calls
lto_codegen_compile() to return a single object file. In the near future,
this function is the entry point for compilation with partition. Linker can
blindly call this function even if partition is turned off; in this case,
compiler will return only one object file.
llvm-svn: 189297
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
llvm-svn: 189282
This adds minimal support to the SelectionDAG for handling address spaces
with different pointer sizes. The SelectionDAG should now correctly
lower pointer function arguments to the correct size as well as generate
the correct code when lowering getelementptr.
This patch also updates the R600 DataLayout to use 32-bit pointers for
the local address space.
v2:
- Add more helper functions to TargetLoweringBase
- Use CHECK-LABEL for tests
llvm-svn: 189221
This adds additional missing Windows subsystem identifiers to the
IMAGE_SUBSYSTEM enumeration.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 189180
Estimate the cyclic critical path within a single block loop. If the
acyclic critical path is longer, then the loop will exhaust OOO
resources after some number of iterations. If lag between the acyclic
critical path and cyclic critical path is longer the the time it takes
to issue those loop iterations, then aggressively schedule for
latency.
llvm-svn: 189120
This will be used to compute the cyclic critical path and to
update precomputed per-node pressure differences.
In the longer term, it could also be used to speed up LiveInterval
update by avoiding visiting all global vreg users.
llvm-svn: 189118
This function attribute indicates that the function is not optimized
by any optimization or code generator passes with the
exception of interprocedural optimization passes.
llvm-svn: 189101
...so that it can be used for z too. Most of the code is the same.
The only real change is to use TargetTransformInfo to test when a sqrt
instruction is available.
The pass is opt-in because at the moment it only handles sqrt.
llvm-svn: 189097
This field specifies registers that are preserved across function calls,
but that should not be included in the generates SaveList array.
This can be used ot generate regmasks for architectures that save
registers through other means, like SPARC's register windows.
llvm-svn: 189084
pointers, but accumulate the offset into an APInt in the process of
stripping it.
This is a pretty handy thing to have, such as when trying to determine
if two pointers are at some constant relative offset. I'll be committing
a patch shortly to use it for exactly that purpose.
llvm-svn: 189000
Value. These methods probably don't belong here, and I'm discussing
moving the lot of them to a better home, but for now I'm about to extend
their functionality and wanted to tidy them up first.
llvm-svn: 188997
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
llvm-svn: 188995
Summary:
This support will be utilized in things like clang to help check printf
format specifiers that are only valid when using the VSCRT.
Reviewers: rnk, asl, chandlerc
Reviewed By: chandlerc
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1455
llvm-svn: 188935
Like yaml ObjectFiles, this will be very useful for testing the MC CFG
implementation (mostly MCObjectDisassembler), by matching the output
with YAML, and for potential users of the MC CFG, by using it as an input.
There isn't much to the actual format, it is just a serialization of the
MCModule class. Of note:
- Basic block references (pred/succ, ..) are represented by the BB's
start address.
- Just as in the MC CFG, instructions are MCInsts with a size.
- Operands have a prefix representing the type (only register and
immediate supported here).
- Instruction opcodes are represented by their names; enum values aren't
stable, enum names mostly are: usually, a change to a name would need
lots of changes in the backend anyway.
Same with registers.
All in all, an example is better than 1000 words, here goes:
A simple binary:
Disassembly of section __TEXT,__text:
_main:
100000f9c: 48 8b 46 08 movq 8(%rsi), %rax
100000fa0: 0f be 00 movsbl (%rax), %eax
100000fa3: 3b 04 25 48 00 00 00 cmpl 72, %eax
100000faa: 0f 8c 07 00 00 00 jl 7 <.Lend>
100000fb0: 2b 04 25 48 00 00 00 subl 72, %eax
.Lend:
100000fb7: c3 ret
And the (pretty verbose) generated YAML:
---
Atoms:
- StartAddress: 0x0000000100000F9C
Size: 20
Type: Text
Content:
- Inst: MOV64rm
Size: 4
Ops: [ RRAX, RRSI, I1, R, I8, R ]
- Inst: MOVSX32rm8
Size: 3
Ops: [ REAX, RRAX, I1, R, I0, R ]
- Inst: CMP32rm
Size: 7
Ops: [ REAX, R, I1, R, I72, R ]
- Inst: JL_4
Size: 6
Ops: [ I7 ]
- StartAddress: 0x0000000100000FB0
Size: 7
Type: Text
Content:
- Inst: SUB32rm
Size: 7
Ops: [ REAX, REAX, R, I1, R, I72, R ]
- StartAddress: 0x0000000100000FB7
Size: 1
Type: Text
Content:
- Inst: RET
Size: 1
Ops: [ ]
Functions:
- Name: __text
BasicBlocks:
- Address: 0x0000000100000F9C
Preds: [ ]
Succs: [ 0x0000000100000FB7, 0x0000000100000FB0 ]
<snip>
...
llvm-svn: 188890
Supports:
- entrypoint, using LC_MAIN.
- static ctors/dtors, using __mod_{init,exit}_func
- translation between effective and object load address, using
dyld's VM address slide.
llvm-svn: 188886
It can now disassemble code in situations where the effective load
address is different than the load address declared in the object file.
This happens for PIC, hence "dynamic".
llvm-svn: 188884
When an MCTextAtom is split, all MCBasicBlocks backed by it are
automatically split, with a fallthrough between both blocks, and
the successors moved to the second block.
llvm-svn: 188881
Summary:
LLVM would generate DWARF with version 3 in the .debug_pubname and
.debug_pubtypes version fields. This would lead SGI dwarfdump to fail
parsing the DWARF with (in the instance of .debug_pubnames) would exit
with:
dwarfdump ERROR: dwarf_get_globals: DW_DLE_PUBNAMES_VERSION_ERROR (123)
This fixes PR16950.
Reviewers: echristo, dblaikie
Reviewed By: echristo
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1454
llvm-svn: 188869
SystemZTargetLowering::emitStringWrapper() previously loaded the character
into R0 before the loop and made R0 live on entry. I'd forgotten that
allocatable registers weren't allowed to be live across blocks at this stage,
and it confused LiveVariables enough to cause a miscompilation of f3 in
memchr-02.ll.
This patch instead loads R0 in the loop and leaves LICM to hoist it
after RA. This is actually what I'd tried originally, but I went for
the manual optimisation after noticing that R0 often wasn't being hoisted.
This bug forced me to go back and look at why, now fixed as r188774.
We should also try to optimize null checks so that they test the CC result
of the SRST directly. The select between null and the SRST GPR result could
then usually be deleted as dead.
llvm-svn: 188779
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
llvm-svn: 188728
builtin. The GCC builtin expects the arguments to be passed by val,
whereas the LLVM intrinsic expects a pointer instead.
This is related to PR 16581 and rdar:14747994.
llvm-svn: 188608
Joey Gouly