We were allowing procedures with the MODULE prefix to be declared at the global
scope. This is prohibited by C1547 and was causing an internal check of the
compiler to fail.
I fixed this by adding a check. I also added a test that would trigger a crash
without this change.
Differential Revision: https://reviews.llvm.org/D97875
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined dummy
procedure arguments.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This change supersedes D97201.
Differential Revision: https://reviews.llvm.org/D97749
Semantic checks for the following OpenMP 4.5 clauses.
1. 2.15.4.2 - Copyprivate clause
2. 2.15.3.4 - Firstprivate clause
3. 2.15.3.5 - Lastprivate clause
Add related test cases and resolve test cases marked as XFAIL.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D91920
This reverts commit 07de0846a5.
The original patch has caused 6 out 8 of Flang's public buildbots to
fail. As I'm not sure what the fix should be, I'm reverting this for
now. Please see https://reviews.llvm.org/D97201 for more context and
discussion.
- add ops: rebox, insert_on_range, absent, is_present
- embox, coordinate_of: replace old hand-written parser/pretty-printer with assembly format
- remove dead floating point ops, since buitlins work for all types
- update call op
- update documentation
- misc. NFC to formatting
- add op round trip tests
Authors: Eric Schweitz, Jean Perier, Zachary Selk, Kiran Chandramohan, et.al.
Differential Revision: https://reviews.llvm.org/D97500
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was
defined using the name of the procedure. But the procedure name was
being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous
symbols. I fixed this by making SymbolSet be an ordered set, which does
not use the "<" operator.
I also added tests that will crash the compiler without this change.
And I fixed the formatting on an error message from a previous update.
Differential Revision: https://reviews.llvm.org/D97201
We lower expressions with rank > 0 to a set of high-level array operations.
These operations are then analyzed and refined to more primitve
operations in subsequent pass(es).
This patch upstreams these array operations and some other helper ops.
Authors: Eric Schweitz, Rajan Walia, Kiran Chandramohan, et.al.
https://github.com/flang-compiler/f18-llvm-project/pull/565
Differential Revision: https://reviews.llvm.org/D97421
This patch makes sure that for the following invocation of the new Flang
driver, clangDriver sets the input type to Fortran:
```
flang-new -E -
```
This change does not affect `clang`, i.e. for the following invocation
the input type is set to C:
```
clang -E -
```
This change leverages the fact that for `flang-new` the driver is in
Flang mode.
Differential Revision: https://reviews.llvm.org/D96777
This patch adds the new zero_bits operation and upstrams other changes
including the following:
- update tablegen syntax to newer forms
- update memory effects annotations
- update documentation [NFC]
- other NFC, such as whitespace and formatting
Differential revision: https://reviews.llvm.org/D97331
Originally, when we added the new driver, we created dedicated test
directories for `flang-new`. This way we separated the tests for the
`throwaway` and the new driver.
As we are increasing test coverage and starting to share tests between
the two drivers, it makes sense to share all directories and instead
rely on:
```
! REQUIRES: new-flang-driver
```
to mark tests as exclusively for the new driver.
Differential Revision: https://reviews.llvm.org/D97207
Add -J to the f18 driver for compatibility with gfortran.
Add -module-dir for compatibility with the new flang driver.
They both set the output directory for .mod files and add the
directory to the search list. -module still only does the former.
Clean up the new driver test to match.
Differential Revision: https://reviews.llvm.org/D97164
This patch adds support for `-Xflang` in `flang-new`. The semantics are
identical to `-Xclang`.
With the addition of `-Xflang`, we can modify `-test-io` to be a
compiler-frontend only flag. This makes more sense, this flag is:
* very frontend specific
* to be used for development and testing only
* not to be exposed to the end user
Originally we added it to the compiler driver, `flang-new`, in order to
facilitate testing. With `-Xflang` this is no longer needed. Tests are
updated accordingly.
Differential Revision: https://reviews.llvm.org/D96864
Add the following options:
* -fdebug-measure-parse-tree
* -fdebug-pre-fir-tree
Summary of changes:
- Add 2 new frontend actions: DebugMeasureParseTreeAction and DebugPreFIRTreeAction
- Add MeasurementVisitor to FrontendActions.h
- Make reportFatalSemanticErrors return true if there are any fatal errors
- Port most of the `-fdebug-pre-fir-tree` tests to use the new driver if built, otherwise use f18.
Differential Revision: https://reviews.llvm.org/D96884
Most Fortran compilers accept the following benign extension,
and it appears in some applications:
SUBROUTINE FOO(A,N)
IMPLICIT NONE
REAL A(N) ! N is used before being typed
INTEGER N
END
Allow it in f18 only for default integer scalar dummy arguments.
Differential Revesion: https://reviews.llvm.org/D96982
Add the following options:
* -fdebug-dump-symbols
* -fdebug-dump-parse-tree
* -fdebug-dump-provenance
Summary of changes:
- Add 3 new frontend actions: DebugDumpSymbolsAction, DebugDumpParseTreeAction and DebugDumpProvenanceAction
- Add a unique pointer to the Semantics instance created in PrescanAndSemaAction
- Move fatal semantic error reporting to its own method, FrontendActions#reportFatalSemanticErrors
- Port most tests using `-fdebug-dump-symbols` and `-fdebug-dump-parse-tree` to the new driver if built, otherwise default to f18
Differential Revision: https://reviews.llvm.org/D96716
Fortran 2018 explicitly permits an ignored type declaration
for the result of a generic intrinsic function. See the comment
added to Semantics/expression.cpp for an explanation of why this
is somewhat dangerous and worthy of a warning.
Differential Revision: https://reviews.llvm.org/D96879
The intrinsic procedure table properly classify the various
intrinsics, but the PURE and ELEMENTAL attributes that these
classifications imply don't always make it to the utility
predicates that test symbols for them, leading to spurious
error messages in some contexts. So set those attribute flags
as appropriate in name resolution, using a new function to
isolate the tests.
An alternate solution, in which the predicates would query
the intrinsic procedure table for these attributes on demand,
was something I also tried, so that this information could
come directly from an authoritative source; but it would have
required references to the intrinsic table to be passed along
on too many seemingly unrelated APIs and ended up looking messy.
Several symbol table tests needed to have their expected outputs
augmented with the PURE and ELEMENTAL flags. Some bogus messages
that were flagged as such in test/Semantics/doconcurrent01.f90 were
removed, since they are now correctly not emitted.
Differential Revision: https://reviews.llvm.org/D96878
It's possible to define a procedure that has a procedure dummy argument which
names the procedure that contains it. This was causing the compiler to fall
into an infinite loop when characterizing a call to the procedure.
Following a suggestion from Peter, I fixed this be maintaining a set of
procedure symbols that had already been seen while characterizing a procedure.
This required passing a new parameter to the functions that characterized a
Procedure, a DummyArgument, and a DummyProcedure.
I also added several tests that will crash the compiler without this change.
Differential Revision: https://reviews.llvm.org/D96631
This patch introduce the fir-opt tool. Similar to mlir-opt for FIR.
It will be used in following patches to test fir opt and round-trip.
Reviewed By: schweitz, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96535
Add the following options:
* -fimplicit-none and -fno-implicit-none
* -fbackslash and -fno-backslash
* -flogical-abbreviations and -fno-logical-abbreviations
* -fxor-operator and -fno-xor-operator
* -falternative-parameter-statement
* -finput-charset=<value>
Summary of changes:
- Enable extensions in CompilerInvocation#ParseFrontendArgs
- Add encoding_ to Fortran::frontend::FrontendOptions
- Add encoding to Fortran::parser::Options
Differential Revision: https://reviews.llvm.org/D96407
This patch adds the following compiler frontend driver options:
* -fdebug-unparse (f18 spelling: -funparse)
* -fdebug-unparse-with-symbols (f18 spelling: -funparse-with-symbols)
The new driver will only accept the new spelling. `f18` will accept both
the original and the new spelling.
A new base class for frontend actions is added: `PrescanAndSemaAction`.
This is added to reduce code duplication that otherwise these new
options would lead to. Implementation from
* `ParseSyntaxOnlyAction::ExecutionAction`
is moved to:
* `PrescanAndSemaAction::BeginSourceFileAction`
This implementation is now shared between:
* PrescanAndSemaAction
* ParseSyntaxOnlyAction
* DebugUnparseAction
* DebugUnparseWithSymbolsAction
All tests that don't require other yet unimplemented options are
updated. This way `flang-new -fc1` is used instead of `f18` when
`FLANG_BUILD_NEW_DRIVER` is set to `On`. In order to facilitate this,
`%flang_fc1` is added in the LIT configuration (lit.cfg.py).
`asFortran` from f18.cpp is duplicated as `getBasicAsFortran` in
FrontendOptions.cpp. At this stage it's hard to find a good place to
share this method. I suggest that we revisit this once a switch from
`f18` to `flang-new` is complete.
Differential Revision: https://reviews.llvm.org/D96483
The following _action_ options are always used with `-fsyntax-only`
(also an _action_ option):
* -fdebug-dump-symbols
* -fdebug-dump-parse-tree
This patch makes the above options imply `-fsyntax-only`.
From the perspective of `f18` this change saves typing and is otherwise
a non-functional change. But it will simplify things in the new driver,
`flang-new`, in which only the last action option is taken into account
and executed. In other words, the following would only run
`-fsyntax-only`:
```
flang-new -fdebug-dump-symbols -fsyntax-only <input>
```
whereas this would only run `-fdebug-dump-symbols`:
```
flang-new -fsyntax-only -fdebug-dump-symbols <input>
```
Differential Revision: https://reviews.llvm.org/D96528
Implementation of Do loop iteration variable check, Do while loop check, Do loop cycle restrictions.
Also to check whether the ordered clause is present on the loop construct if any ordered region ever
binds to a loop region arising from the loop construct.
Files:
check-omp-structure.h
check-omp-structure.cpp
resolve-directives.cpp
Testcases:
omp-do06-positivecases.f90
omp-do06.f90
omp-do08.f90
omp-do09.f90
omp-do10.f90
omp-do11.f90
omp-do12.f90
omp-do13.f90
omp-do14.f90
omp-do15.f90
omp-do16.f90
omp-do17.f90
Reviewed by: Kiran Chandramohan @kiranchandramohan , Valentin Clement @clementval
Differential Revision: https://reviews.llvm.org/D92732
This patch introduce the fir-opt tool. Similar to mlir-opt for FIR.
It will be used in following patches to test fir opt and round-trip.
Reviewed By: schweitz, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96535
Instead of using a message attachment with further details,
emit the details as part of a single message.
Differential Revision: https://reviews.llvm.org/D96465
Most components required for this are already there.
Build and Testing clean.
ninja check-flang
Reviewed By: clementval, tskeith
Differential Revision: https://reviews.llvm.org/D96411
Some state in name resolution is stored in the DeclarationVisitor
instance and processed at the end of the specification part.
This state needs to accommodate nested specification parts, namely
the ones that can be nested in a subroutine or function interface
body.
Differential Revision: https://reviews.llvm.org/D96466
Add support for the following options:
* -fopenmp
* -fopenacc
Update OpenMP and OpenACC semantics tests to use the new driver if it is built, otherwise use f18.
OpenMP tests that include `use omp_lib` or run `test_symbols.sh` have not been updated as they require options `-intrinsic-module-directory` and `-funparse-with-symbols` which are currently not implemented in the new driver.
Similarly OpenACC tests that run `test_symbols.sh` have not been updated.
This patch also moves semanticsContext to CompilerInvocation and creates it in CompilerInvocation#setSemanticsOpts so that the semantics context can use Fortran::parser::Options#features.
Summary of changes:
- Move semanticsContext to CompilerInvocation.h
- Update OpenMP and OpenACC semantics tests that do not rely on `-intrinsic-module-directory` and `-funparse-with-symbols` to use %flang
Differential Revision: https://reviews.llvm.org/D96032
This patch adds logic in the InputOutputTestAction frontend action for
reading input from stdin. Without this patch the following fails:
```
flang-new -fc1 -test-io -
```
The implementation of `InputOutputTestAction` is cleaned-up and a test
for reading from stdin is added.
Note that there's a difference between `-test-io` and e.g. `-E` in terms
of file I/O. The frontend action for the former handles all file I/O on
it's own. Conversely, the action corresponding to -E relies on the
prescanner API to handle this.
Currently we can't test reading from stdin for `flang-new -`. In this
case `libclangDriver` assumes `-x -c`. This in turn leads to `flang-new
-cc1`, which is not supported.
Add support for option -J/-module-dir in the new Flang driver. This
will allow for including module files in other directories, as the
default search path is currently the working folder. This also provides
an option of storing the output module in the specified folder.
Differential Revision: https://reviews.llvm.org/D95448
Add support for the following layout options:
* -ffree-form
* -ffixed-form
- -ffixed-line-length=n (alias -ffixed-line-length-n)
Additionally remove options `-fno-free-form` and `-fno-fixed-form` as they were initially added to forward to gfortran but gfortran does not support these flags.
This patch adds the flag FlangOnlyOption to the existing options `-ffixed-form`, `-ffree-form` and `-ffree-line-length-` in Options.td. As of commit 6a75496836, these flags are not currently forwarded to gfortran anyway.
The default fixed line length in FrontendOptions is 72, based off the current default in Fortran::parser::Options. The line length cannot be set to a negative integer, or a positive integer less than 7 excluding 0, consistent with the behaviour of gfortran.
This patch does not add `-ffree-line-length-n` as Fortran::parser::Options does not have a variable for free form columns.
Whilst the `fixedFormColumns` variable is used in f18 for `-ffree-line-length-n`, f18 only allows `-ffree-line-length-none`/`-ffree-line-length-0` and not a user-specified value. `fixedFormcolumns` cannot be used in the new driver as it is ignored in the frontend when dealing with free form files.
Summary of changes:
- Remove -fno-fixed-form and -fno-free-form from Options.td
- Make -ffixed-form, -ffree-form and -ffree-line-length-n FlangOnlyOption in Options.td
- Create AddFortranDialectOptions method in Flang.cpp
- Create FortranForm enum in FrontendOptions.h
- Add fortranForm_ and fixedFormColumns_ to Fortran::frontend::FrontendOptions
- Update fixed-form-test.f so that it guarantees that it fails when forced as a free form file to better facilitate testing.
Differential Revision: https://reviews.llvm.org/D95460
Constant folding for calls to LBOUND() was not working when the lower bound of
a constant array was not 1.
I fixed this and re-enabled the test in Evaluate/folding16.f90 that previously
was silently failing. I slightly changed the test to parenthesize the first
argument to exercise all of the new code.
Differential Revision: https://reviews.llvm.org/D95894
Now that semantics is working, the standard -fsyntax-only option of
GNU and Clang should be used as the name of the option that causes
f18 to just run the front-end. Support both options in f18, silently
accepting the old option as a synonym for the new one (as
preferred by the code owner), and replace all instances of the
old -fparse-only option with -fsyntax-only throughout the source base.
Differential Revision: https://reviews.llvm.org/D95887
Implement IEEE_SUPPORT_DATATYPE() and other inquiry intrinisic
functions from the intrinsic module IEEE_ARITHMETIC, folding all of
their results to .TRUE.
Differential Revision: https://reviews.llvm.org/D95830
This patch adds a check that verifies that the input file used when
calling the frontend driver (i.e. `flang-new -fc1`) actually exists.
This was not required for the compiler driver, `flang-new`, as that's
already handled in libclangDriver.
Once all input/output file management is moved to the driver, we should
also check that for input from `stdin` the corresponding file descriptor
was successfully acquired.
This patch also makes sure that the default action in the frontend is
`ParseSyntaxOnly`. This is consistent with Clang. Before this change
`flang-new -fc1` would do nothing, which makes testing changes like the
one introduced here a bit tricky.
Reviewed By: SouraVX
Differential Revision: https://reviews.llvm.org/D95127
Legacy Fortran implementations support an alternative form of the
PARAMETER statement; it differs syntactically from the standard's
PARAMETER statement by lacking parentheses, and semantically by
using the type and shape of the initialization expression to define
the attributes of the named constant. (GNU Fortran gets that part
wrong; Intel Fortran and nvfortran have full support.)
This patch disables the old style PARAMETER statement by default, as
it is syntactically ambiguous with conforming assignment statements;
adds a new "-falternative-parameter-statement" option to enable it;
and implements it correctly when enabled.
Fixes https://bugs.llvm.org/show_bug.cgi?id=48774, in which a user
tripped over the syntactic ambiguity.
Differential Revision: https://reviews.llvm.org/D95697
There were two problems with constant arrays whose lower bound is not 1.
First, when folding the arrays, we were creating the folded array to have lower
bounds of 1 but, we were not re-adjusting their lower bounds to the
declared values. Second, we were not calculating the extents correctly.
Both of these problems led to bogus error messages.
I fixed the first problem by adjusting the lower bounds in
NonPointerInitializationExpr() in Evaluate/check-expression.cpp. I wrote the
class ArrayConstantBoundChanger, which is similar to the existing class
ScalarConstantExpander. In the process of implementing and testing it, I found
a bug that I fixed in ScalarConstantExpander which caused it to infinitely
recurse on parenthesized expressions. I also removed the unrelated class
ScalarExpansionVisitor, which was not used.
I fixed the second problem by changing the formula that calculates upper bounds
in in the function ComputeUpperBound() in Evaluate/shape.cpp.
I added tests that trigger the bogus error messages mentioned above along with
a constant folding tests that uses array operands with shapes that conform but
have different bounds.
In the process of adding tests, I discovered that tests in
Evaluate/folding09.f90 and folding16.f90 were written incorrectly, and I
fixed them. This also revealed a bug in contant folding of the
intrinsic "lbounds" which I plan to fix in a later change.
Differential Revision: https://reviews.llvm.org/D95449
Make the #include "file" preprocessing directive begin its
search in the same directory as the file containing the directive,
as other preprocessors and our Fortran INCLUDE statement do.
Avoid current working directory for all source files except the original.
Resolve tests.
Differential Revision: https://reviews.llvm.org/D95481
Peter Steinfeld