Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 283334
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 282485
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: vkalintiris, dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 281724
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
Add the instruction alias sgtu (register form only), two operand forms of
s[rl]l and sra, and missing single/two operand forms of dnegu/neg.
Reviewers: dsanders
Differential Revision: https://reviews.llvm.org/D22752
llvm-svn: 276736
Enforce compact branch register restrictions such as the use of the zero
register, both operands being the same register. Emit clear error in such
cases as the issue is subtle.
For bovc and bnvc, silently fixup such cases when emitting objects directly,
like LLVM started doing in rL269899.
Reviewers: vkalintiris, dsanders
Differential Review: http://reviews.llvm.org/D20475
llvm-svn: 271301
The isMemWithSimmOffset predicate rejects relocations which is incorrect
behaviour. Linkers and other tools should handle|warn|error when the
field overflows.
Reviewers: dsanders, vkalintiris
Differential Revision: http://reviews.llvm.org/D20727
llvm-svn: 270995
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
Summary: The assembler was picking the wrong JR variant because the pre-R6 one was still enabled at R6.
Author: nitesh.jain
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Differential: D18387
llvm-svn: 265134
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
llvm-svn: 262231
Summary:
It actually takes an offset into the current PC-region.
This fixes the 'expr' command in lldb.
Reviewers: vkalintiris, jaydeep, bhushan
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16054
llvm-svn: 257339
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Summary:
Added support for the following instructions:
CACHEE, LBE, LBUE, LHE, LHUE, LWE, LLE, LWLE, LWRE, PREFE,
SBE, SHE, SWE, SCE, SWLE, SWRE, TLBINV, TLBINVF
This required adding some infrastructure for the EVA ASE.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11139
llvm-svn: 247669
Summary:
This patch remaps the assembly idiom 'move' to 'or' instead of 'daddu' or
'addu'. The use of addu/daddu instead of or as move was highlighted as a
performance issue during the analysis of a recent 64bit design. Originally
move was encoded as 'or' by binutils but was changed for the r10k cpu family
due to their pipeline which had 2 arithmetic units and a single logical unit,
and so could issue multiple (d)addu based moves at the same time but only 1
logical move.
This patch preserves the disassembly behaviour so that disassembling a old style
(d)addu move still appears as move, but assembling move always gives an or
Patch by Simon Dardis.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11796
llvm-svn: 244579
Summary:
Previously it (incorrectly) used GPR's.
Patch by Simon Dardis. A couple small corrections by myself.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10567
llvm-svn: 240883
Summary:
These AssemblerPredicate's are unnecessary and actually make some instructions unusable when assembling pre-MIPS32 ISAs.
For example, this was causing the IAS to reject the 'j' instruction for MIPS I-V.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8300
llvm-svn: 234398
Summary:
This adds a MipsInstAlias which expands to XORi $reg,$reg,imm. For example, "xor $6, 0x3A" should be expanded to "xori $6, $6, 58".
This should work for all MIPS ISAs.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8284
llvm-svn: 232473
The original commit r221299 was reverted in r221307. I removed the name
"hrw_ulr" ($29) from the original commit because two tests were failing.
llvm-svn: 221681
Summary:
It seems we accidentally read the wrong column of the table MIPS64r6 spec
and used the names for c.cond.fmt instead of cmp.cond.fmt.
Differential Revision: http://reviews.llvm.org/D4387
llvm-svn: 212607
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
llvm-svn: 212330
Summary:
This instruction is re-encoded in MIPS32r6/MIPS64r6 without changing the
restrictions. We hadn't implemented it for earlier ISA's so it has been added to those too.
Differential Revision: http://reviews.llvm.org/D4265
llvm-svn: 211590
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
llvm-svn: 211019
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
llvm-svn: 211018
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
llvm-svn: 211012
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
llvm-svn: 210900
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
llvm-svn: 210898
Summary:
The accumulator-based (HI/LO) multiplies and divides from earlier ISA's have
been removed and replaced with GPR-based equivalents. For example:
div $1, $2
mflo $3
is now:
div $3, $1, $2
This patch disables the accumulator-based multiplies and divides for
MIPS32r6/MIPS64r6 and uses the GPR-based equivalents instead.
Renamed expandPseudoDiv to insertDivByZeroTrap to better describe the
behaviour of the function.
MipsDelaySlotFiller now invalidates the liveness information when moving
instructions to the delay slot. Without this, divrem.ll will abort since
%GP ends up used before it is defined.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3896
llvm-svn: 210760
Summary: These instructions are available in ISAs >= mips32/mips64. For mips32r6/mips64r6, jr.hb has a new encoding format.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4019
llvm-svn: 210654
Simon Dardis