This adds a new command to the ir-memory-map tester:
free <allocation-index>
The argument to free is an index which identifies which live allocation
to free. Index 0 identifies the first live allocation in the address
space, index 1 identifies the second, etc. where the allocations are
sorted in increasing order.
For illustrative purposes, assume malloc returns monotonically
increasing addresses. Here are some examples of how free would work:
Example 1
---------
malloc 16 1
malloc 32 1
free 1 //< Free the 32-byte allocation.
free 0 //< Next, free the 16-byte allocation.
Example 2
---------
malloc 16 1
malloc 32 1
free 0 //< Free the 16-byte allocation.
free 0 //< Next, free the 32-byte allocation.
llvm-svn: 333700
r333583 introduced testing for IRMemoryMap's process-side allocations
(eAllocationPolicyProcessOnly). This adds support for the host-side
variety (eAllocationPolicyHostOnly).
llvm-svn: 333698
Summary:
As discussed in https://bugs.llvm.org/show_bug.cgi?id=37317,
FindGlobalVariables does not properly handle the case where
append=false. As this doesn't seem to be used in the tree, this patch
removes the parameter entirely.
Reviewers: clayborg, jingham, labath
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits, kubamracek, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46885
Patch by Tom Tromey <ttromey@mozilla.com>.
llvm-svn: 333639
This teaches lldb-test how to launch a process, set up an IRMemoryMap,
and issue memory allocations in the target process through the map. This
makes it possible to test IRMemoryMap in a targeted way.
This has uncovered two bugs so far. The first bug is that Malloc
performs an adjustment on the pointer returned from AllocateMemory (for
alignment purposes) which ultimately allows overlapping memory regions
to be created. The second bug is that after most of the address space on
the host side is exhausted, Malloc may return the same address multiple
times. These bugs (and hopefully more!) can be uncovered and tested for
with targeted lldb-test commands.
At an even higher level, the motivation for addressing these bugs is
that they can lead to strange user-visible failures (e.g, variables
assume the wrong value during expression evaluation, or the debugger
crashes). See my third comment on this swift-lldb PR for an example:
https://github.com/apple/swift-lldb/pull/652
I hope lldb-test is the right place to add this testing harness. Setting
up a gtest-style unit test proved too cumbersome (you need to recreate
or mock way too much debugger state), as did writing end-to-end tests
(it's hard to write a test that actually hits a buggy path).
With lldb-test, it's easy to read/generate the test input and parse the
test output. I'll attach a simple "fuzz" tester which generates failing
test cases to the Phab review. Here's an example:
```
Command: malloc(size=1024, alignment=32)
Malloc: address = 0xca000
Command: malloc(size=64, alignment=16)
Malloc: address = 0xca400
Command: malloc(size=1024, alignment=16)
Malloc: address = 0xca440
Command: malloc(size=16, alignment=8)
Malloc: address = 0xca840
Command: malloc(size=2048, alignment=16)
Malloc: address = 0xcb000
Command: malloc(size=64, alignment=32)
Malloc: address = 0xca860
Command: malloc(size=1024, alignment=16)
Malloc: address = 0xca890
Malloc error: overlapping allocation detected, previous allocation at [0xca860, 0xca8a0)
```
{F6288839}
Differential Revision: https://reviews.llvm.org/D47508
llvm-svn: 333583
Summary: When compiling with modules, these missing includes cause the build to fail (as the header can't be compiled into a module).
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D47412
llvm-svn: 333345
Now it's possible to set breakpoints before selecting a target, they
will be set to the dummy target and then copied to an each added one.
Patch by Alexander Polyakov!
Differential Revision: https://reviews.llvm.org/D46588
llvm-svn: 333205
Summary:
For lldb-server, it is sufficient to parse only the native object file
format for its target OS (no other file can be loaded into a running
process). This moves the object file initialization code into specific
initializer classes: lldb-test and liblldb get all object files;
lldb-server gets only one of them. For this to work, I've needed to
create a special SystemInitializer for use in lldb-server, instead of it
calling directly into the common one.
This reduces the size of lldb-server by about 2%, which is not
earth-shattering, but it's an easy win, and it helps.
Reviewers: zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D47250
llvm-svn: 333182
This patch restructures part of LLDB's testing configuration:
1. I moved the test dependencies up the chain so every dotest dependency
becomes a lit dependency as well. It wouldn't make sense for dotest to
have other dependencies when it's being run by lit. Lit on the other
hand can still specify extra dependencies.
2. I replaced as much generator expressions with variables as possible.
This is consistent with the rest of LLVM and doesn't break generators
that support multiple targets (MSVC, Xcode). This wasn't a problem
before, but now we need to expand the dotest arguments in the lit
configuration and there's only one test suite even with multiple
targets.
3. I moved lldb-dotest into it's own directory under utils since there's
no need anymore for it to located under `test/`.
Differential revision: https://reviews.llvm.org/D46334
llvm-svn: 331463
Summary:
lldb-test already had the ability to dump all symbol information in a
module. This is interesting, but it can be too verbose, and it also does
not use the same APIs that lldb uses to query symbol information. The
last part is interesting to me now, because I am about to add DWARF v5
debug_names support, which needs to implement these APIs.
This patch adds a set of arguments to lldb-test, which modify it's
behavior from dumping all symbols to dumping only the requested
information:
- --find={function,namespace,type,variable} - search for the given
kind of objects.
- --name - the name to search for.
- --regex - whether to treat the "name" as a regular expression. This is
not available for all lookup types (we do not have the required APIs
for namespaces and types).
- --context - specifies the context, which can be used to restrict the
search. This argument takes a variable name (which must be defined and
be unique), and we then use the context that this variable is defined
in as the search context.
- --function-flags={auto,full,base,method,selector} - a set of flags to
further restrict the search for function symbols.
Together, these flags and their combinations cover the main SymbolFile
entry points which I will need to modify for the accelerator table
support, and so I plan to do most of the regression testing this way.
(I've also found this a useful tool for exploration of what the given
APIs are supposed to do.)
I add a couple of tests to demonstrate the usage of the usage of the
various options, and also an xfailed test which demonstrates a bug I
found while playing with this. The only requirement for these tests is
the presence of lld -- the should run on any platform which is able to
build lldb.
These tests use c++ code as input, but this isn't a requirement. It is also
possible to use IR, assembly or json to create the test module.
Reviewers: davide, zturner, asmith, JDevlieghere, clayborg, alexshap
Subscribers: mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D46318
llvm-svn: 331447
This brings the LLDB configuration closer to LLVM's and removes visual
clutter in the source code by removing the @brief commands from
comments.
This patch also reflows the paragraphs in all doxygen comments.
See also https://reviews.llvm.org/D46290.
Differential Revision: https://reviews.llvm.org/D46321
llvm-svn: 331373
LLDB doesn't use this packet so we never hit this, but it looks like
some other projects talk to debugserver and are hitting an assert
(https://github.com/derekparker/delve/issues/1015).
We had an off by 1 in the accounting of the FPU structure sizes.
I added a test that basically just check that 'g' doesn't return
an error (currently it assert in debug builds). I didn't make
it an lldb-server test because it looks like lldb-server doesn't
implement the g packet.
llvm-svn: 331004
When I merged the 2 codepaths that return an OS type, I hade
checked that the places accepting 'iphoneos' would also accept
'ios', but then I got it backwards and return 'iphoneos'.
We use this value to build triples, and there 'iphoneos' is
invalid.
This also makes the test slightly simpler.
llvm-svn: 330877
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
Summary:
In one of the 2 places the LC_BUILD_VERSION load command is handled, there
is a bug preventing us from actually handling them (the address where to
read the load command was not updated). This patch factors reading the
deployment target load commands into a helper and adds testing for the 2
code paths calling the helper.
The testing is a little bit complicated because the only times those load
commands matter is when debugging a simulator process. I added a new
decorator to check that a specific SDK is available. The actual testing was
fairly easy once I knew how to run a simulated process.
Reviewers: jasonmolenda, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45298
llvm-svn: 329374
Summary:
When a MIG routine returns KERN_FAILURE, the demux function will release any OOL resources like ports. In this case, task_port and thread_port will be released twice, potentially resulting in use after free of the ports.
I don't think we can test this in any useful way
rdar://problem/37331387
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45011
llvm-svn: 328761
in to debugserver; my re-addition resulted in duplicated
symbols. Remove my added SocketAddress.cpp, and change the
original one to also be included for the debugserver-mini target.
llvm-svn: 327918
the debugserver-mini target in debugserver. Add a new plist
which needs to be installed for debugserver-mini.
<rdar://problem/36751222>
llvm-svn: 327915
are installed
Instead of building debugserver when building lldb, I'd rather pass
LLDB_CODESIGN_IDENTITY="" to cmake and use the one already on my system.
However, on one of my machines I only have the CommandLineTools installed, and
so the hardcoded path to the system debugserver does not work for me.
Additionally, we should verify the LLDB framework exists on the machine before
trying to set the path to debugserver. This allows us to warn the user at
configure time that a system debugserver can't be found if they choose not to
build it themselves.
Patch by Alex Langford!
Differential Revision: https://reviews.llvm.org/D44507
llvm-svn: 327691
This reverts commit r327318. It breaks the Xcode and CMake Darwin
builders:
clang: error: no such file or directory:
'.../source/Plugins/Architecture/PPC64/ArchitecturePPC64.cpp'
clang: error: no input files
More details are in https://reviews.llvm.org/D42582.
llvm-svn: 327327
stuff. Activate it when an internal SDK is selected. Update the name of
the LDFLAGS to match the rest of the settings. Update the default arch for
ios builds.
llvm-svn: 327095
1. Link against libpmenergy and pmsample unconditionally. It is available on
macOS 10.10 ("Yosemite") and newer. We're already linking against libcompression
unconditionally which is only available on macOS 10.11 & newer.
2. Change a few "sdk=macosx.internal"'s to sdk=macosx.
3. Clean up a few places where libcompression was being enabled inconsistently.
Note: the -DLLDB_ENERGY define is only set when building against the macosx.internal
SDK; it includes a header file that is not public. We link against the dylibs
unconditionally for simplicity.
llvm-svn: 327084
Summary:
The test was failing in remote debugging scenario with windows as a host
as cmd.exe is not able to parse the complicated shell commands in the
Makefile.
The test seemed like a perfect candidate for a more focused testing
approach, so I have rewritten in on top of lldb-test's module-sections
functionality. The slight gotcha there was that the
Module::GetSectionList does not include the sections from the symbol
file until someone manually calls Module::GetSymbolVendor. Normally,
this is not an issue, because someone will have initialized the symbol
vendor by the time anyone starts looking at the sections. However, when
all one this is dump the section list, we run into this problem.
I've tried making this behavior more automatic, but it turns out it's
not that easy, so for now, I just manually initialize the Symbol Vendor
before dumping out the sections in lldb-test.
Reviewers: jankratochvil
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42914
llvm-svn: 326805
were originally written by Chris Bieneman, they've undergone a
number of changes since then.
Also including the debugserver bridgeos support, another arm
environment that runs Darwin akin to ios. These codepaths are
activated when running in a bridgeos environment which we're not
set up to test today.
There's additional (small) lldb changes to handle bridgeos binaries
that still need to be merged up.
Tested on a darwin system with avx512 hardware and without.
<rdar://problem/36424951>
llvm-svn: 326756
Summary:
The command takes two input arguments: a module to use as a debug target
and a file containing a list of commands. The command will execute each
of the breakpoint commands in the file and dump the breakpoint state
after each one.
The commands are expected to be breakpoint set/remove/etc. commands, but
I explicitly allow any lldb command here, so you can do things like
change setting which impact breakpoint resolution, etc. There is also a
"-persistent" flag, which causes lldb-test to *not* automatically clear
the breakpoint list after each command. Right now I don't use it, but
the idea behind it was that it could be used to test more complex
combinations of breakpoint commands (set+modify, set+disable, etc.).
Right now the command prints out only the basic breakpoint state, but
more information can be easily added there. To enable easy matching of
the "at least one breakpoint location found" state, the command
explicitly prints out the string "At least one breakpoint location.".
To enable testing of breakpoints set with an absolute paths, I add the
ability to perform rudimentary substitutions on the commands: right now
the string %p is replaced by the directory which contains the command
file (so, under normal circumstances, this will perform the same
substitution as lit would do for %p).
I use this command to rewrite the TestBreakpointCaseSensitivity test --
the test was checking about a dozen breakpoint commands, but it was
launching a new process for each one, so it took about 90 seconds to
run. The new test takes about 0.3 seconds for me, which is approximately
a 300x speedup.
Reviewers: davide, zturner, jingham
Subscribers: luporl, lldb-commits
Differential Revision: https://reviews.llvm.org/D43686
llvm-svn: 326112
The lldb-server unit tests don't test the right thing when the debug
server in use is copied from somewhere else. This can lead to spurious
test failures.
Disable these unit tests when an external debug server is in use.
Fixes llvm.org/PR36494.
llvm-svn: 326001
Summary:
Consolidate LLDB_CODESIGN_IDENTITY logic in one place and use
SKIP_DEBUGSERVER, which can be set independently, to control
codesigning targets.
Currently, running cmake the first time in a clean directory, without
passing -DLLDB_CODESIGN_IDENTITY='', fails. However, subsequent runs
succeed. That's because LLDB_CODESIGN_IDENTITY gets added to the
CACHE after the initial test. To fix that, the default value must be
set before it's tested.
Here's the error produced on the first run:
CMake Error at tools/lldb/tools/debugserver/source/CMakeLists.txt:215 (add_custom_command):
No TARGET 'debugserver' has been created in this directory.
Differential Revision: https://reviews.llvm.org/D43432
llvm-svn: 325442
Remove obsolete measurements.
This check in requires at least 10.11
Reviewed: Jason Molenda, Jim Ingham
<rdar://problem/37047106> Xcode Memory gauge should show the jetsam ledger footprint rather than anonymous
llvm-svn: 324013
been specified yet (either by the user, or by one of the lldb
extensions like qHostInfo or qProcessInfo), and the target.xml
includes a <architecture> tag specifying x86_64, set the architecture
appropriately.
I'm not sure what we can expect to see in the <architecture> tag, so
I'm only doing this for x86_64 right now where I've seen "i386:x86_64"
used. I've seen a target.xml from a jtag board that sends just "arm"
because it doesn't know more specifically what type of board it is
connected to...
<rdar://problem/29908970>
llvm-svn: 322339
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
(built with Xcode) from 10.9 to 10.11. It also enables the use of
libcompression in debugserver by default (these API are only present
in macOS 10.11 and newer -- 10.11 was released c. Sep 2015).
I don't know if we have people / bots building lldb on older mac
releases; if this turns out to be a problem I will revert the change.
There are some parts of lldb (e.g. debugserer's ability to report
the OS version #) that only work with 10.10 and this changes the
behavior of lldb (whether the older or newer dyld interfaces are
used) so there is some importance to updating the min required
version.
llvm-svn: 322128
Summary:
Make sure we propagate environment when starting debugserver with a pre-loaded
inferior. AFAIK, RNBRunLoopLaunchInferior is only called in pre-loaded inferior
scenario, so we can just pick up the debugserver environment instead of trying
to construct an envp from the (empty) context.
This makes debugserver pass an test added for an equivalent lldb-server fix.
Reviewers: jasonmolenda, clayborg
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D41352
llvm-svn: 321355
Summary:
We were failing to propagate the environment when lldb-server was
started with a pre-loaded process
(e.g.: lldb-server gdbserver -- inferior --inferior_args)
This patch makes sure the environment is propagated. Instead of adding a
new GDBRemoteCommunicationServerLLGS::SetLaunchEnvironment function to
complement SetLaunchArgs and SetLaunchFlags, I replace these with a
more generic SetLaunchInfo, which can be used to set any launch-related
property.
The accompanying test also verifies that the server correctly terminates
the connection after sending the exit packet (specifically, that it does
not send the exit packet twice).
Reviewers: clayborg, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41070
llvm-svn: 320984
Summary:
We use the llvm decompressor to decompress SHF_COMPRESSED sections. This enables
us to read data from debug info sections, which are sometimes compressed,
particuarly in the split-dwarf case. This functionality is only available if
llvm is compiled with zlib support.
Reviewers: clayborg, zturner
Subscribers: emaste, mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D40616
llvm-svn: 320813
Fix alignment UB in some Mach exception-handling logic.
This lets us build lldb and debugserver with UBSan in trapping mode, and
get further along in the testing process before a trap is encountered.
rdar://35923991
llvm-svn: 320127
This is a follow-up to r319840. I guess none of the systems I'd tested
on before had LLDB_SYSTEM_LIBS set, which is why I didn't see any local
errors, but I'm surprised none of the bots caught it either.
llvm-svn: 319953
Null-checking functions which aren't marked weak_import is a no-op
(the compiler rewrites the check to 'true'), regardless of whether a
library providing its definition is weak-linked. If the deployment
target is greater than the minimum requirement, the availability markup
on APIs does not lower to weak_import.
Remove no-op null checks to clean up the code and silence warnings.
Differential Revision: https://reviews.llvm.org/D40812
llvm-svn: 319936
This is basically a proof-of-concept and starting point for having a
testing-centric tool in LLDB. I'm sure this leaves a lot of room to be
desired, but this at least allows us to have something to build on.
Right now there is only one command, the `module-sections` command, and I
created this command not because it was particularly special, but
because it addressed an immediate use case and was extremely simple.
Run the tool as `lldb-test module-sections <path-to-object>`.
Feel free to add testing related stuff to your heart's content after
this goes in. Implementing the commands themselves takes some work, but
once they're there they can be reused without writing any code and
result in very easy to use and maintain tests.
Differential Revision: https://reviews.llvm.org/D40636
llvm-svn: 319504
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
Using TCP sockets is insecure against local attackers, and possibly
against remote attackers too (some vulnerabilities may allow tricking a
browser to make a request to localhost). Use socketpair (which is immune
to such attacks) on all Unix platforms.
Patch by Demi Marie Obenour < demiobenour@gmail.com >
Differential Revision: https://reviews.llvm.org/D33213
llvm-svn: 314127
1. Fix a data race (g_interrupt_sent flag usage was not thread safe, signals
can be handled on arbitrary threads)
2. exit() is not signal-safe, replaced it with the signal-safe equivalent
_exit()
(This differs from the patch on Phabrictor because I had to add
`#include <atomic>` to get the definition of `std::atomic_flag`.)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37926
llvm-svn: 313785
Turns out WITH_LOCKDOWN define changes the struct layout and constructor implementation for RNBSocket which is used in debugserver.cpp, so we need to make sure this is consistent.
In the future we should change WITH_LOCKDOWN to be configured in a generated header, but for now we can just set it correctly.
<rdar://problem/33900552>
llvm-svn: 312666
Summary:
-var-update calls CMICmdCmdVarUpdate::ExamineSBValueForChange to check if a varObj has been updated. It checks that the varObj is updated, then recurses on all of its children. If a child is a pointer pointing back to a parent node, this will result in an infinite loop, and lldb-mi hanging.
The problem is exposed by packages/Python/lldbsuite/test/tools/lldb-mi/variable/TestMiVar.py, but this test is skipped everywhere.
This patch changes ExamineSBValueForChange to not traverse children of varObjs that are pointers.
Reviewers: ki.stfu, zturner, clayborg, abidh
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37154
llvm-svn: 312270
to match the changes Saleem Abdulrasool committed in r311579. Fixes
a testsuite failure now that the testsuite expects a 16 bit return
value for thsi reg.
llvm-svn: 311627
-- 2 files were missing in this commit which should have been there.
These files were submitted initially for review and were reviewed.
However, while updating the revision with newer diffs, I accidentally
forgot to include them in newer diffs. So commiting now.
llvm-svn: 310341
Summary:
1. Provide single library for all Intel specific hardware features instead
of individual libraries for each feature
2. Added Intel(R) Processor Trace hardware feature in this single library.
Details about the tool implementing this feature is as follows:
Tool developed on top of LLDB to provide its users the execution
trace of the debugged inferiors. Tool's API are exposed as C++ object
oriented interface in a shared library. API are designed especially to be
easily integrable with IDEs providing LLDB as an application debugger.
Entire API is also available as Python functions through a script bridging
interface allowing development of python modules.
This patch also provides a CLI wrapper to use the Tool through LLDB's command
line. Highlights of the Tool and the wrapper are given below:
******************************
Intel(R) Processor Trace Tool:
******************************
- Provides execution trace of the debugged application
- Uses Intel(R) Processor Trace hardware feature (already implemented inside LLDB)
for this purpose
-- Collects trace packets generated by this feature from LLDB, decodes and
post-processes them
-- Constructs the execution trace of the application
-- Presents execution trace as a list of assembly instructions
- Provides 4 APIs (exposed as C++ object oriented interface)
-- start trace with configuration options for a thread/process,
-- stop trace for a thread/process,
-- get the execution flow (assembly instructions) for a thread,
-- get trace specific information for a thread
- Easily integrable into IDEs providing LLDB as application debugger
- Entire API available as Python functions through script bridging interface
-- Allows developing python apps on top of Tool
- README_TOOL.txt provides more details about the Tool, its dependencies, building
steps and API usage
- Tool ready to use through LLDB's command line
-- CLI wrapper has been developed on top of the Tool for this purpose
*********************************
CLI wrapper: cli-wrapper-pt.cpp
*********************************
- Provides 4 commands (syntax similar to LLDB's CLI commands):
-- processor-trace start
-- processor-trace stop
-- processor-trace show-trace-options
-- processor-trace show-instr-log
- README_CLI.txt provides more details about commands and their options
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, jingham, lldb-commits, labath
Reviewed By: clayborg
Subscribers: ravitheja, emaste, krytarowski, mgorny
Differential Revision: https://reviews.llvm.org/D33035
llvm-svn: 310261
When building for iOS we build two variants of debugserver. One which supports UI functionality like Springboard for launching applications, and one which does not.
This patch adds support for building debugserver with and without UI support libraries being available.
llvm-svn: 309026
This refactoring changes two significant things about how the debugserver build system works:
(1) debugserver will include all appropriate architecture support, so we can now build arm or ppc debugservers
(2) debugserver can be built by itself, so you don't have to configure all of LLDB in order to generate debugserver.
llvm-svn: 308377
Summary:
It defined a couple of types (condition_t) which we don't use anymore,
as we have c++11 goodies now. I remove these definitions.
Also it unnecessarily included a couple of headers which weren't
necessary for it's operation. I remove these, and place the includes in
the relevant files (usually .cpp, usually in Host code) which use them.
This allows us to reduce namespace pollution in most of the lldb files
which don't need the OS-specific definitions.
Reviewers: zturner, jingham
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D35113
llvm-svn: 308304
Summary:
The usage of shared_from_this forces us to separate construction and
initialization phases, because shared_from_this() is not available in
the constructor (or destructor). The shared semantics are not necessary,
as we always have a clear owner of the native process class
(GDBRemoteCommunicationServerLLDB object). Even if we need shared
semantics in the future (which I think we should strongly avoid),
reverting this will not be necessary -- the owners can still easily
store the native process object in a shared pointer if they really want
to -- this just prevents the knowledge of that from leaking into the
class implementation.
After this a NativeThread object will hold a reference to the parent
process (instead of a weak_ptr) -- having a process instance always
available allows us to simplify some logic in this class (some of it was
already simplified because we were asserting that the process is
available, but this makes it obvious).
Reviewers: krytarowski, eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35123
llvm-svn: 308282
While adding IPv6 support to debugserver I broke handling wildcard addresses and fully qualified address filtering. This patch resolves that bug and adds a test for matching the address "*".
<rdar://problem/32947613>
llvm-svn: 307957
Summary:
This replaces the static functions used for creating
NativeProcessProtocol instances with a factory pattern, and modernizes
the interface of the new class in the process -- I use llvm::Expected
instead of the Status+value combo. I also move some of the common code
(like the Delegate registration into the base class). The new
arrangement has multiple benefits:
- it removes the NativeProcess*** dependency from Process/gdb-remote
(which for example means that liblldb no longer pulls in this code).
- it enables unit testing of the GDBRemoteCommunicationServerLLGS class
(by providing a mock Native Process).
- serves as another example on how to use the llvm::Expected class (I
couldn't get rid of the Initialize-type functions completely here
because of the use of shared_from_this, but that's the next thing on
my list here)
Tests still pass on Linux and I've made sure NetBSD compiles after this.
Reviewers: zturner, eugene, krytarowski
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33778
llvm-svn: 307390
Summary:
These interfaces have no dependencies, so it makes sense for them to be
in the lowest level modules, to make sure that other parts of the
codebase can use them without introducing loops.
The only exception here is the Connection::CreateDefaultConnection
method, which I've moved to Host, as it instantiates concrete
implementations, and that's where the implementations live.
Reviewers: jingham, zturner
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D34400
llvm-svn: 306391
strerror is not thread-safe. llvm's StrError tries hard to retrieve the
string in a thread-safe way and falls back to strerror only if it does
not have another way.
llvm-svn: 304795
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This support was landed in r300579, and reverted in r300669 due to failures on the bots.
The failures were caused by sockets not being properly closed, and this updated version of the patches should resolve that.
Summary from the original change:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
https://reviews.llvm.org/D31823
llvm-svn: 301492
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
Summary: This patch adds IPv6 support to debugserver. It follows a similar pattern to the changes proposed for LLDB/Host except that the listen implementation is only with kqueue(2) because debugserver is only supported on Darwin.
Reviewers: jingham, jasonmolenda, clayborg
Reviewed By: clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31824
llvm-svn: 300580
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
Summary:
This patch refactors the CMake build system's support for building debugserver to allow us to build the majority of debugserver's sources into the debugserverCommon library which can then be reused by unit tests.
The first unit test I've written tests debug server's ability to accept incoming connections from LLDB. The test forks the process, and one side creates a listening socket using debugserver's socket API, the other side creates a transmitting socket using LLDB's TCPSocket class.
I have no clue where to even start getting this connected into the LLDB Xcode project, so for now these tests are CMake-only.
Reviewers: zturner, labath, jasonmolenda
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D31357
llvm-svn: 300111
This patch makes adjustments to header file includes in
lldbUtility based on recommendations by the iwyu tool
(include-what-you-use). The goal here is to make sure that
all files include the exact set of headers which are needed
for that file only, to eliminate cases of dead includes (e.g.
someone deleted some code but forgot to delete the header
includes that that code necessitated), and to eliminate the
case where header includes are picked up transitively.
llvm-svn: 299676
Summary:
This is the base for introduction of further features to support Process Tracing on NetBSD, in local and remote setup.
This code is also a starting point to synchronize the development with other BSDs. Currently NetBSD is ahead and other systems can catch up.
Sponsored by <The NetBSD Foundation>
Reviewers: emaste, joerg, kettenis, labath
Reviewed By: labath
Subscribers: mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31138
llvm-svn: 298408
Summary:
ofstream does not handle paths with non-ascii characters correctly on
windows, so I am switching these to llvm streams to fix that.
Reviewers: zturner, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31079
llvm-svn: 298375
Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
This patch modifies the Get/Set Register Value/Context functions for Intel to not duplicate code for reading non-AVX registers. This is similar to other transformations I've been making to the AVX register handling code.
llvm-svn: 297787
This patch consolidates the DEBUG_FPU_REGS code for i386 and x86_64 to take advantage of the fact that the non-AVX members of the avx register state structure overlap with the standard fpu register state structure.
This reduces the amount of code required to set debug values into the register state structures because the register state structures are stored in a union.
llvm-svn: 297688
Summary:
The first Sandybridge iMacs with AVX support shipped in Spring 2011 with Snow Leopard as their OS. Unfortunately due to a kernel bug debugging AVX code was not really possible until 10.7.4.
The old code here checked the kernel build number to determine when to support AVX, but that code was incorrect. It verified that the kernel build number was greater than xnu-2020, which is the build of the kernel that had the fix for 10.8. The fix was also back ported to 10.7.4. Which means all publicly available OS builds 10.7.4 and later have working AVX support.
This new patch verifies that the host OS is greater than or equal to 10.7.4 by checking that the build number is greater than or equal to 11Exx.
The patch also removes the HasAVX assembly blob in favor of querying the kernel via sysctl for the hardware features.
Using sysctl is slower, however since the code is executed once and the result cached it is a better approach because it is possible for the kernel to disable AVX support on hardware that supports it, so listening to the kernel is a better approach for the debugger to take.
Reviewers: jasonmolenda, spyffe
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30918
llvm-svn: 297685
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Prior to MSVC 2015 we had to manually include this header any
time we were going to include <thread> or <future> due to a
bug in MSVC's STL implementation. This has been fixed in MSVC
for some time now, and we require VS 2015 minimum, so we can
remove this across all subprojects.
llvm-svn: 296906
Summary:
Use StringRef and ArrayRef where possible. This adds an accessor to the
Args class to get a view of the arguments as ArrayRef<const char *>.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30402
llvm-svn: 296592
Summary:
This converts LLDB's logging to use llvm streams instead of
lldb_private::Stream and friends. The changes are mostly
straight-forward and amount to s/lldb_private::Stream/llvm::raw_ostream.
The part worth calling out is the rewrite of the StreamCallback class.
Previously this class contained a per-thread buffer of data written. I
assume this had something to do with it trying to make sure each log
line is delivered as a single event, instead of multiple (possibly
interleaved) events. However, this is no longer relevant as the Log
class already writes things to a temporary buffer and then delivers the
message as a single "write", so I have just removed the code in
question.
Reviewers: zturner, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29615
llvm-svn: 294736
Summary:
This patch removes the over-specified dependencies from LLDBDependencies and instead relies on the dependencies as expressed in each library and tool.
This also removes the library looping in favor of allowing CMake to do its thing. I've tested this patch on Darwin, and found no issues, but since linker semantics vary by system I'll also work on testing it on other platforms too.
Help testing would be greatly appreciated.
Reviewers: labath, zturner
Subscribers: danalbert, srhines, mgorny, jgosnell, lldb-commits
Differential Revision: https://reviews.llvm.org/D29352
llvm-svn: 294515
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
Currently, in the default configuration, the "install" target will
install all llvm executables unversioned, except for three lldb tools
which will be installed versioned (with a non-versioned symlink). This
rectifies that situation.
Reviewers: beanz, sylvestre.ledru, mgorny
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D29126
llvm-svn: 293803
Summary:
Cannot pass object of non-POD type 'const CMIUtilString' through variadic function.
This behavior is undefined according to C++11 5.2.2/7:
> Passing a potentially-evaluated argument of class type having a non-trivial copy constructor, a non-trivial move contructor, or a non-trivial destructor, with no corresponding parameter, is conditionally-supported with implementation-defined semantics.
Replace SetErrorDescriptionn(errMsg); with SetErrorDescription(errMsg);
Original patch by Tobias Nygren (NetBSD).
Sponsored by <The NetBSD Foundation>
Reviewers: clayborg, labath, emaste, joerg, ki.stfu
Reviewed By: labath, ki.stfu
Subscribers: tnn, ki.stfu, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29256
llvm-svn: 293774
This change reverts the lldb-server part of r293686, which is having trouble on Linux bots. I'm not sure if I can make lldb-server work correctly until the full dependency graph is fixed.
llvm-svn: 293690
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
Summary:
The Boundary Table Entries are stored in the application memory and allow
to store boundary info for all the pointers of the program, also those that
otherwise wouldn't fit in the 4 bound registers provided by the HW.
Here is an example of how it works:
* mpx-table show <pointer>
lbound = 0x..., ubound = 0x..., (pointer value = 0x..., metadata = 0x...)
* mpx-table set <pointer>
Signed-off-by: Valentina Giusti <valentina.giusti@intel.com>
Reviewers: labath, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29078
llvm-svn: 293660
requires that this private framework be available - and it is not
available earlier than macOS 10.12 - to build lldb), dlopen the
framework binary on demand in debugserver. We're already using
dlsym() to look up all the symbols so there is no need to use weak
linking here.
<rdar://problem/30158797>
llvm-svn: 293135
which led to
ERROR: test_auxv_chunked_reads_work_debugserver (tools/lldb-server/TestGdbRemoteAuxvSupport.py)
ERROR: test_auxv_data_is_correct_size_debugserver (tools/lldb-server/TestGdbRemoteAuxvSupport.py)
ERROR: test_auxv_keys_look_valid_debugserver (tools/lldb-server/TestGdbRemoteAuxvSupport.py)
ERROR: test_qSupported_returns_known_stub_features_debugserver (tools/lldb-server/TestLldbGdbServer.py)
failures because debugserver was advertising compression being available, e.g.
send packet: $qSupported:xmlRegisters=i386,arm,mips#12
read packet: $qXfer:features:read+;PacketSize=20000;qEcho+;SupportedCompressions=zlib-deflate;DefaultCompressionMinSize=384#00
maybe these tests should be a little more accepting of additional
features. but I didn't mean for this to be enabled on mac native.
llvm-svn: 292890
This adds the LLDB_LOG macro, which enables one to write more succinct log
statements.
if (log)
log->Printf("log something: %d", var);
becomes
LLDB_LOG(log, "log something: {0}, var);
The macro still internally does the "if(log)" dance, so the arguments are only
evaluated if logging is enabled, meaning it has the same overhead as the
previous syntax.
Additionally, the log statements will be automatically prefixed with the file
and function generating the log (if the corresponding new argument to the "log
enable" command is enabled), so one does not need to manually specify this in
the log statement.
It also uses the new llvm formatv syntax, which means we don't have to worry
about PRIx64 macros and similar, and we can log complex object (llvm::StringRef,
lldb_private::Error, ...) more easily.
Differential Revision: https://reviews.llvm.org/D27459
llvm-svn: 292360
Summary:
The NDK cmake toolchain file defines CMAKE_SYSTEM_NAME=Android, so switch the
build to use that. I have also updated the in-tree toolchain file to do that
(instead of defining __ANDROID_NDK__), so it can still be used to build.
After migrating the last bits of non-toolchainy bits out of the in-tree
toolchain, I intend to delete it.
Reviewers: tberghammer, danalbert
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D28775
llvm-svn: 292212
The llvm_config hack for lldb-server is only necessary for !DYLIB builds, as
otherwise we would get unresolved symbols from lldb libraries which do not track
their dependencies correctly (all of them). In a DYLIB build, the so will
already be added to the link dependencies and we can use that to resolve all
missing symbols.
The proper fix for this would be to have each lldb library track its
dependencies correctly.
llvm-svn: 291555
Wasn't sure I could include ErrorHandling.h here, and evidently I wasn't
building this part (must've made the change using sed after getting
tired of fixing each compilation error individually).
llvm-svn: 291204
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
Summary:
Some of the mi commands implemented in lldb-mi are incomplete/not confirming to the spec.
- `gdb-show` and `gdb-set` doesn't support getting/setting `disassembly-flavor`
- `environment-cd` should also change the working directory for inferior
- debugger CLI output should be printed as console-stream-output record, rather than being dumped directly
to stdout
- `target-select` should provide inner error message in mi response
Related bug report:
- https://llvm.org/bugs/show_bug.cgi?id=28026
- https://llvm.org/bugs/show_bug.cgi?id=28718
- https://llvm.org/bugs/show_bug.cgi?id=30265
Reviewers: ki.stfu, abidh
Subscribers: abidh, ki.stfu, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D24711
llvm-svn: 291104
30 seconds to match the old springboard timeout; the launcher
should time out before that and we will hopefully get back
an informative error message instead of timing out ourselves.
llvm-svn: 290163
In LLVM's CMake we have a convention that components have both a build and an install target. Making LLDB follow this convention will allow LLDB to take advantage of the LLVM_DISTRIBUTION_COMPONENTS build option from LLVM.
llvm-svn: 289879
Summary: I was building lldb using cross mingw-w64 toolchain on Linux and observed some issues. This is first patch in the series to fix that build. It mostly corrects the case of include files and adjusts some #ifdefs from _MSC_VER to _WIN32 and vice versa. I built lldb on windows with VS after applying this patch to make sure it does not break the build there.
Reviewers: zturner, labath, abidh
Subscribers: ki.stfu, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27759
llvm-svn: 289821
Rationale:
scripts/Python/modules: android is excluded at a higher level, so no point in
checking here
tools/lldb-mi: lldb-mi builds fine (with some cosmetic tweaks) on android, and
there is no reason it shouldn't.
tools/lldb-server: LLDB_DISABLE_LIBEDIT/CURSES already take the platform into
account, so there is no point in checking again.
I am reasonably confident this should not break the build on any platform, but
I'll keep an eye out on the bots.
llvm-svn: 288661
Summary:
This replaces all the uses of the __ANDROID_NDK__ define with __ANDROID__. This
is a preparatory step to remove our custom android toolchain file and rely on
the standard android NDK one instead, which does not provide this define.
Instead I rely, on __ANDROID__, which is set by the compiler.
I haven't yet removed the cmake variable with the same name, as we will need to
do something completely different there -- NDK toolchain defines
CMAKE_SYSTEM_NAME to Android, while our current one pretends it's linux.
Reviewers: tberghammer, zturner
Subscribers: danalbert, srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27305
llvm-svn: 288494
We were referencing a the process class from a register context, which seems
intuitively wrong. Also, the comment above that code is now definitely incorrect,
as ProcessElfCore now does support floating point registers. Also, the code
wasn't really doing anything, as it was just skipping a zero-initialization of a
field that was most likely zero-initialized anyway. Linux elf core FPR test still
passes after this.
llvm-svn: 288237
It seems a debug build of lldb-server will not complete without these, as the
linker is not able to strip out code that aggressively. Add those back until I
can figure out how to break the dependency chains.
llvm-svn: 288181
I don't believe the code in those plugins could be in any way useful for
lldb-server, but I can't be sure if this will break some transitive dependencies.
Builtbots should be able to tell us that.
llvm-svn: 288169
Summary:
This basically just inlines the LLDBDependencies.cmake file into lldb-server
CMakeLists.txt. The reason is that most of these dependencies are not actually
necessary for lldb-server (some of them can't be removed because of
cross-dependencies, but most of the plugins can). I intend to start cleaning
these up in follow-up commits, but I want to do this first, so the subsequent
ones can be easily reverted if they don't build in some configurations.
When I cleaned these up locally, I was able to get a 30%--50% improvement in
lldb-server size.
Reviewers: zturner, beanz, tfiala
Subscribers: danalbert, srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26975
llvm-svn: 288159
Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted back to integers once
they go into the generic Communication class -- that I am leaving to a separate
change.
The changes are mostly straight-forward (*), the only tricky part was
representation of infinite timeouts.
Currently, we use UINT32_MAX to denote infinite timeout. This is not well suited
for duration classes, as they tend to do arithmetic on the values, and the
identity of the MAX value can easily get lost (e.g.
microseconds(seconds(UINT32_MAX)).count() != UINT32_MAX). We cannot use zero to
represent infinity (as Listener classes do) because we already use it to do
non-blocking polling reads. For this reason, I chose to have an explicit value
for infinity.
The way I achieved that is via llvm::Optional, and I think it reads quite
natural. Passing llvm::None as "timeout" means "no timeout", while passing zero
means "poll". The only tricky part is this breaks implicit conversions (seconds
are implicitly convertible to microseconds, but Optional<seconds> cannot be
easily converted into Optional<microseconds>). For this reason I added a special
class Timeout, inheriting from Optional, and enabling the necessary conversions
one would normally expect.
(*) The other tricky part was GDBRemoteCommunication::PopPacketFromQueue, which
was needlessly complicated. I've simplified it, but that one is only used in
non-stop mode, and so is untested.
Reviewers: clayborg, zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26971
llvm-svn: 287864
This is to fix a regression in remote-linux lldb-server connections.
We were wrongly passing a copy of uri and expecting a stringRef back.
llvm-svn: 287542
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Summary:
liblldb does not re-export the llvm library contained within, so lldb-mi needs to
manage its own dependencies. Right now it only uses the llvm support library.
Reviewers: beanz, zturner, tfiala, clayborg, abidh
Subscribers: ki.stfu, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26190
llvm-svn: 285894
Summary: This tool is only built on Darwin, and the name darwin-debug matches the Xcode project. We should have this in sync unless there is a good reason not to.
Reviewers: zturner, tfiala, labath
Subscribers: labath, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D25745
llvm-svn: 285356
Summary:
The dependencies of our libraries (only liblldb, really) we marked as public, which caused all
their dependencies to be repeated when linking any executables to them. This is a problem because
then all the .a files could end up being linked twice, once to liblldb and once
again to to the executable linking against liblldb (lldb, lldb-mi). As it turns out,
our build actually depends on this behavior:
- on windows, lldb does not have getopt, so it pulls it from inside liblldb, even
though getopt is not a part of the exported interface of liblldb (maybe some of
the bsd variants have this problem as well)
- lldb-mi uses llvm, which again is not exported by liblldb
This change does not actually fix these problems (that is going to be a hard
one), but it does make them explicit by moving this magic from add_lldb_library
to the places the executable targets are defined. That way, I can link the
additional .a files only on targets that really need it, and the other targets
can build cleanly and make sure we don't regress further. It also fixes the
LLVM_LINK_LLVM_DYLIB build on linux.
Reviewers: zturner, beanz
Subscribers: ki.stfu, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D25680
llvm-svn: 284466
Alexander Polyakov