This re-applies r336929 with a fix to accomodate for the Mips target
scheduling multiple SelectionDAG instances into the pass pipeline.
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
llvm-svn: 336964
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
It was recently discovered that, for Mips's SelectionDAGISel subclasses,
all optimization levels caused SelectionDAGISel to behave like -O2.
This change adds the necessary plumbing to initialize the optimization level.
Reviewers: andrew.w.kaylor
Subscribers: andrew.w.kaylor, sdardis, dean, llvm-commits, vradosavljevic, petarj, qcolombet, probinson, dsanders
Differential Revision: https://reviews.llvm.org/D14900
llvm-svn: 275410
Summary:
[ls][bh] and [ls][bh]u cannot use sp-relative addresses and must therefore
lower frameindex nodes such that there is a copy to a CPU16Regs register. This
is now done consistently using a separate addressing mode that does not
permit frameindex nodes.
As part of this I've had to remove an optimization that reduced the number of
instructions needed to work around the lack of sp-relative addresses on [ls][bh]
and [ls][bh]u. This optimization used one of the eight CPU16Regs registers as
a copy of the stack pointer and it's implementation was the root cause of many
of the register vs register class mismatches.
lw/sw can use sp-relative addresses but we ought to ensure that we use the
correct version of lw/sw internally for things like IAS. This is not currently
the case and this change does not fix this. However, this change does clean it
up sufficiently well to fix the machine verifier failures.
Also removed irrelevant functions from stchar.ll.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21062
llvm-svn: 272882
- Where we were returning a node before, call ReplaceNode instead.
- Where we would return null to fall back to another selector, rename
the method to try* and return a bool for success.
- Where we were calling SelectNodeTo, just return afterwards.
Part of llvm.org/pr26808.
llvm-svn: 269519
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Summary:
The documentation writes vectors highest-index first whereas LLVM-IR writes
them lowest-index first. As a result, instructions defined in terms of
left_half() and right_half() had the halves reversed.
In addition to correcting them, they have been improved to allow shuffles
that use the same operand twice or in reverse order. For example, ilvev
used to accept masks of the form:
<0, n, 2, n+2, 4, n+4, ...>
but now accepts:
<0, 0, 2, 2, 4, 4, ...>
<n, n, n+2, n+2, n+4, n+4, ...>
<0, n, 2, n+2, 4, n+4, ...>
<n, 0, n+2, 2, n+4, 4, ...>
One further improvement is that splati.[bhwd] is now the preferred instruction
for splat-like operations. The other special shuffles are no longer used
for splats. This lead to the discovery that <0, 0, ...> would not cause
splati.[hwd] to be selected and this has also been fixed.
This fixes the enc-3des test from the test-suite on Mips64r6 with MSA.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9660
llvm-svn: 237689
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break
anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate
Constraint_* values.
PR22883 was caused the matching operands copying the whole of the operand flags
for the matched operand. This included the constraint id which needed to be
replaced with the operand number. This has been fixed with a conversion
function. Following on from this, matching operands also used the operand
number as the constraint id. This has been fixed by looking up the matched
operand and taking it from there.
llvm-svn: 232165
This (r232027) has caused PR22883; so it seems those bits might be used by
something else after all. Reverting until we can figure out what else to do.
Original commit message:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
llvm-svn: 232093
Summary:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8171
llvm-svn: 232027
calls that don't take a Function argument from Mips. Notable
exceptions: the AsmPrinter and MipsTargetObjectFile. The
latter needs to be fixed, and the former will be fixed when the
general AsmPrinter changes happen.
llvm-svn: 227512
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
a) Move the replacement level decision to the target machine.
b) Create additional subtargets at the TargetMachine level to
cache and make replacement easy.
c) Make the mips16 features obvious.
d) Remove the override logic as it no longer does anything.
e) Have MipsModuleDAGToDAGISel take only the target machine.
f) Have the constant islands pass grab the current subtarget
from the MachineFunction (via the TargetMachine) instead
of caching it.
g) Unconditionally initialize TLOF.
h) Remove the old complicated subtarget based resetting and
replace it with simple conditionals.
llvm-svn: 213430
passes in the mips back end. This, unfortunately, required a
bit of churn in the various predicates to use a pointer rather
than a reference.
llvm-svn: 212744
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
llvm-svn: 202717
This required correcting the definition of the bins[lr]i intrinsics because
the result is also the first operand.
It also required removing the (arbitrary) check for 32-bit immediates in
MipsSEDAGToDAGISel::selectVSplat().
Currently using binsli.d with 2 bits set in the mask doesn't select binsli.d
because the constant is legalized into a ConstantPool. Similar things can
happen with binsri.d with more than 10 bits set in the mask. The resulting
code when this happens is correct but not optimal.
llvm-svn: 193687
Most constant BUILD_VECTOR's are matched using ComplexPatterns which cover
bitcasted as well as normal vectors. However, it doesn't seem to be possible to
match ldi.[bhwd] in a type-agnostic manner (e.g. to support the widest range of
immediates, it should be possible to use ldi.b to load v2i64) using TableGen so
ldi.[bhwd] is matched using custom code in MipsSEISelDAGToDAG.cpp
This made the majority of the constant splat BUILD_VECTOR lowering redundant.
The only transformation remaining for constant splats is when an (up-to) 32-bit
constant splat is possible but the value does not fit into a 10-bit signed
integer. In this case, the BUILD_VECTOR is transformed into a bitcasted
BUILD_VECTOR so that fill.[bhw] can be used to splat the vector from a GPR32
register (which is initialized using the usual lui/addui sequence).
There are no additional tests since this is a re-implementation of previous
functionality. The change is intended to make it easier to implement some of
the upcoming instruction selection patches since they can rely on existing
support for BUILD_VECTOR's in the DAGCombiner.
compare_float.ll changed slightly because a BITCAST is no longer
introduced during legalization.
llvm-svn: 191299
Matthias Braun