For fold
(X & (signbit l>> Y)) ==/!= 0 -> (X << Y) >=/< 0
(X & (signbit << Y)) ==/!= 0 -> (X l>> Y) >=/< 0
Test cases of X being constant are positive tests not negative.
Prep work for D62818.
llvm-svn: 364497
The current implementation of ThumbRegisterInfo::saveScavengerRegister
is bad for two reasons: one, it's buggy, and two, it blocks using R12
for other optimizations. So this patch gets rid of it, and adds the
necessary support for using an ordinary emergency spill slot on Thumb1.
(Specifically, I think saveScavengerRegister was broken by r305625, and
nobody noticed for two years because the codepath is almost never used.
The new code will also probably not be used much, but it now has better
tests, and if we fail to emit a necessary emergency spill slot we get a
reasonable error message instead of a miscompile.)
A rough outline of the changes in the patch:
1. Gets rid of ThumbRegisterInfo::saveScavengerRegister.
2. Modifies ARMFrameLowering::determineCalleeSaves to allocate an
emergency spill slot for Thumb1.
3. Implements useFPForScavengingIndex, so the emergency spill slot isn't
placed at a negative offset from FP on Thumb1.
4. Modifies the heuristics for allocating an emergency spill slot to
support Thumb1. This includes fixing ExtraCSSpill so we don't try to
use "lr" as a substitute for allocating an emergency spill slot.
5. Allocates a base pointer in more cases, so the emergency spill slot
is always accessible.
6. Modifies ARMFrameLowering::ResolveFrameIndexReference to compute the
right offset in the new cases where we're forcing a base pointer.
7. Ensures we never generate a load or store with an offset outside of
its frame object. This makes the heuristics more straightforward.
8. Changes Thumb1 prologue and epilogue emission so it never uses
register scavenging.
Some of the changes to the emergency spill slot heuristics in
determineCalleeSaves affect ARM/Thumb2; hopefully, they should allow
the compiler to avoid allocating an emergency spill slot in cases
where it isn't necessary. The rest of the changes should only affect
Thumb1.
Differential Revision: https://reviews.llvm.org/D63677
llvm-svn: 364490
Summary: This patch introduces a new heuristic for guiding operand reordering. The new "look-ahead" heuristic can look beyond the immediate predecessors. This helps break ties when the immediate predecessors have identical opcodes (see lit test for an example).
Reviewers: RKSimon, ABataev, dtemirbulatov, Ayal, hfinkel, rnk
Reviewed By: RKSimon, dtemirbulatov
Subscribers: rnk, rcorcs, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60897
llvm-svn: 364478
I don't think there was anything going wrong here,
but the auto-generating CHECK line script is known
to have problems with 'TMP' because it uses that
to match nameless values.
This is a retry of rL364452.
llvm-svn: 364477
The LivePhysRegs calculated in order to find a scratch register in the
epilogue code wrongly uses 'LiveIns'. Instead, it should use the
'Liveout' sets. For the liveness, also considering the operands of
the terminator (return) instruction which is the insertion point for
the scratch-exec-copy instruction.
Patch by Christudasan Devadasan
llvm-svn: 364470
This patch rewrites the loop iteration to only visit every other element starting with element 0. And we work on the "even" element and "next" element at the same time. The "First" logic has been moved to the bottom of the loop and doesn't run on every element. I believe it could create dangling nodes previously since we didn't check if we were going to use SCALAR_TO_VECTOR for the first insertion. I got rid of the "First" variable and just do a null check on V which should be equivalent. We also no longer use undef as the starting V for vectors with no zeroes to avoid false dependencies. This matches v8i16.
I've changed all the extends and OR operations to use MVT::i32 since that's what they'll be promoted to anyway. I've tried to use zero_extend only when necessary and use any_extend otherwise. This resulted in some improvements in tests where we are now able to promote aligned (i32 (extload i8)) to a 32-bit load.
Differential Revision: https://reviews.llvm.org/D63702
llvm-svn: 364469
The bitstream reader handles errors poorly. This has two effects:
* Bugs in file handling (especially modules) manifest as an "unexpected end of
file" crash
* Users of clang as a library end up aborting because the code unconditionally
calls `report_fatal_error`
The bitstream reader should be more resilient and return Expected / Error as
soon as an error is encountered, not way late like it does now. This patch
starts doing so and adopting the error handling where I think it makes sense.
There's plenty more to do: this patch propagates errors to be minimally useful,
and follow-ups will propagate them further and improve diagnostics.
https://bugs.llvm.org/show_bug.cgi?id=42311
<rdar://problem/33159405>
Differential Revision: https://reviews.llvm.org/D63518
llvm-svn: 364464
Create a per-byte shuffle mask based on the computeKnownBits from each operand - if for each byte we have a known zero (or both) then it can be safely blended.
Fixes PR41545
llvm-svn: 364458
I don't think there was anything going wrong here,
but the auto-generating CHECK line script is known
to have problems with 'TMP' because it uses that
to match nameless values.
llvm-svn: 364452
Summary:
This fixes a hardware bug that makes a branch offset of 0x3f unsafe.
This replaces the 32 bit branch with offset 0x3f to a 64 bit
instruction that includes the same 32 bit branch and the encoding
for a s_nop 0 to follow. The relaxer than modifies the offsets
accordingly.
Change-Id: I10b7aed99d651f8159401b01bb421f105fa6288e
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63494
llvm-svn: 364451
This implements a small enhancement to https://reviews.llvm.org/D55506
Specifically, while we were able to match strict FP nodes for
floating-point extend operations with a register as source, this
did not work for operations with memory as source.
That is because from regular operations, this is represented as
a combined "extload" node (which is a variant of a load SD node);
but there is no equivalent using a strict FP operation.
However, it turns out that even in the absence of an extload
node, we can still just match the operations explicitly, e.g.
(strict_fpextend (f32 (load node:$ptr))
This patch implements that method to match the LDEB/LXEB/LXDB
SystemZ instructions even when the extend uses a strict-FP node.
llvm-svn: 364450
Summary:
Since the WebAssembly SIMD shift instructions take i32 operands, we
truncate the i64 operand to <2 x i64> shifts during ISel. When the i64
operand is sign extended from i32, this CL makes it so the sign
extension is dropped instead of a wrap instruction added.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63615
llvm-svn: 364446
Summary:
Implements direct and indirect tail calls enabled by the 'tail-call'
feature in both DAG ISel and FastISel. Updates existing call tests and
adds new tests including a binary encoding test.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62877
llvm-svn: 364445
Summary:
Doing better separation of Cost and Threshold.
Cost counts the abstract complexity of live instructions, while Threshold is an upper bound of complexity that inlining is comfortable to pay.
There are two parts:
- huge 15K last-call-to-static bonus is no longer subtracted from Cost
but rather is now added to Threshold.
That makes much more sense, as the cost of inlining (Cost) is not changed by the fact
that internal function is called once. It only changes the likelyhood of this inlining
being profitable (Threshold).
- bonus for calls proved-to-be-inlinable into callee is no longer subtracted from Cost
but added to Threshold instead.
While calculations are somewhat different, overall InlineResult should stay the same since Cost >= Threshold compares the same.
Reviewers: eraman, greened, chandlerc, yrouban, apilipenko
Reviewed By: apilipenko
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60740
llvm-svn: 364422
Summary:
The one thing of note here is that the 'bitwidth' constant (32/64) was previously pessimistic.
Given `x & (-1 >> (C - z))`, we were taking `C` to be `bitwidth(x)`, but in reality
we want `(-1 >> (C - z))` pattern to mean "low z bits must be all-ones".
And for that, `C` should be `bitwidth(-1 >> (C - z))`, i.e. of the shift operation itself.
Last pattern D does not seem to exhibit any of these truncation issues.
Although it has the opposite problem - if we extract low bits (no shift) from i64,
and then truncate to i32, then we fail to shrink this 64-bit extraction into 32-bit extraction.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62806
llvm-svn: 364419
Summary:
(Not so) boringly identical to pattern a (D62786)
Not yet sure how do deal with the last pattern c.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62793
llvm-svn: 364418
Summary:
Finally tying up loose ends here.
The problem is quite simple:
If we have pattern `(x >> start) & (1 << nbits) - 1`,
and then truncate the result, that truncation will be propagated upwards,
into the `and`. And that isn't currently handled.
I'm only fixing pattern `a` here,
the same fix will be needed for patterns `b`/`c` too.
I *think* this isn't missing any extra legality checks,
since we only look past truncations. Similary, i don't think
we can get any other truncation there other than i64->i32.
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62786
llvm-svn: 364417
This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
llvm-svn: 364412
Ideally this needs to be a generic combine in DAGCombiner::visitEXTRACT_SUBVECTOR but there's some nasty regressions in aarch64 due to neon shuffles not handling bitcasts at all.....
llvm-svn: 364407
Introduce the debug info flag that indicates that a parameter has unchanged
value throughout a function. This info will be used to emit the expressions
with DW_OP_entry_value.
([4/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58034
llvm-svn: 364406
Summary:
The getFixupKindContainerSizeBytes function returns the size of the
instruction containing a given fixup. Currently fixup_arm_pcrel_9 is
not handled in this function, this causes an assertion failure in
the debug build and incorrect codegen in the release build.
This patch fixes the problem.
Reviewers: ostannard, simon_tatham
Reviewed By: ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, pbarrio, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63778
llvm-svn: 364404
This patch adds the PseudoCALLReg instruction which allows using an
explicit register operand as the destination for the return address.
GCC can successfully parse this form of the call instruction, which
would be used for calls to functions which do not use ra as the return
address register, such as the __riscv_save libcalls. This patch forms
the first part of an implementation of -msave-restore for RISC-V.
Differential Revision: https://reviews.llvm.org/D62685
llvm-svn: 364403
truncateVectorWithPACK is often used in conjunction with ComputeNumSignBits which struggles when peeking through bitcasts.
This fix tries to avoid bitcast(shuffle(bitcast())) patterns in the 256-bit 64-bit sublane shuffles so we can still see through at least until lowering when the shuffles will need to be bitcasted to widen the shuffle type.
llvm-svn: 364401
This patch generalizes the UnrollLoop utility to support loops that exit
from the header instead of the latch. Usually, LoopRotate would take care
of must of those cases, but in some cases (e.g. -Oz), LoopRotate does
not kick in.
Codesize impact looks relatively neutral on ARM64 with -Oz + LTO.
Program master patch diff
External/S.../CFP2006/447.dealII/447.dealII 629060.00 627676.00 -0.2%
External/SPEC/CINT2000/176.gcc/176.gcc 1245916.00 1244932.00 -0.1%
MultiSourc...Prolangs-C/simulator/simulator 86100.00 86156.00 0.1%
MultiSourc...arks/Rodinia/backprop/backprop 66212.00 66252.00 0.1%
MultiSourc...chmarks/Prolangs-C++/life/life 67276.00 67312.00 0.1%
MultiSourc...s/Prolangs-C/compiler/compiler 69824.00 69788.00 -0.1%
MultiSourc...Prolangs-C/assembler/assembler 86672.00 86696.00 0.0%
Reviewers: efriedma, vsk, paquette
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D61962
llvm-svn: 364398
For some reason, the update_llc_checks.py script produces checks for
empty lines which cause failures. Corrected that to check for actual
text produced by llc.
llvm-svn: 364377
An upcoming patch will modify the behaviour with respect to saving the TOC
in functions with indirect calls.
Adding a test case so the patch will show the difference in codegen.
llvm-svn: 364375
This was just an omission in the back end. We have had the instructions for both
single and double precision for a few HW generations, but never got around to
legalizing these.
Differential revision: https://reviews.llvm.org/D63634
llvm-svn: 364373
The weak alias should have the characteristics set to
`IMAGE_EXTERN_WEAK_SEARCH_ALIAS` to indicate that the weak external here
is a symbol alias and that the symbol is aliased to a locally defined
symbol. We were previously setting the characteristics to
`IMAGE_EXTERN_WEAK_SEARCH_LIBRARY` which indicates that the symbol
should be looked for in the libraries.
llvm-svn: 364370
r363233 rewrote a bunch of the Intrin Emitter code, however the new
function to update the arg codes did not properly consider a pointer to
an any. This patch adds that logic.
Differential Revision: https://reviews.llvm.org/D63507
llvm-svn: 364364
When we calculate MII, we use two loops, one with iterator R++ to
check whether we can reserve the resource, then --R to move back
the iterator to do reservation.
This is risky, as R++, --R may not point to the same element at all.
The can cause wrong MII.
Differential Revision: https://reviews.llvm.org/D63536
llvm-svn: 364353
Original patch https://reviews.llvm.org/D63659 from
Steven Perron <stevenperron@google.com>
The pass AMDGPUUnifyDivergentExitNodes does not update the phi nodes in
the successors of blocks that is splits. This is fixed by calling
BasicBlock::splitBasicBlock to split the block instead of doing it
manually. This does extra work because a new conditional branch is
created in BB which is immediately replaced, but I think the simplicity
is worth it. It also helps make the code more future proof in case other
things need to be updated.
llvm-svn: 364342
This follows up the transform from rL363956 to use the ctpop intrinsic when checking for power-of-2-or-zero.
This is matching the isPowerOf2() patterns used in PR42314:
https://bugs.llvm.org/show_bug.cgi?id=42314
But there's at least 1 instcombine follow-up needed to match the alternate form:
(v & (v - 1)) == 0;
We should have all of the backend expansions handled with:
rL364319
(x86-specific changes still needed for optimal code based on subtarget)
And the larger patterns to exclude zero as a power-of-2 are joining with this change after:
rL364153 ( D63660 )
rL364246
Differential Revision: https://reviews.llvm.org/D63777
llvm-svn: 364341
Peephole opt has a one use limitation which appears to be accidental. The function being used was incorrectly documented as returning whether the def had one *user*, but instead returned true only when there was one *use*. Add a corresponding hasOneNonDbgUser helper, and adjust peephole-opt to use the appropriate one.
All of the actual folding code handles multiple uses within a single instruction. That codepath is well exercised through instruction selection.
Differential Revision: https://reviews.llvm.org/D63656
llvm-svn: 364336
We currently have some isel patterns for treating vzmovl+load the same as vzload, but that shrinks the load which we shouldn't do if the load is volatile.
Rather than adding isel checks for volatile. This patch removes the patterns and teachs DAG combine to merge them into vzload when its legal to do so.
Differential Revision: https://reviews.llvm.org/D63665
llvm-svn: 364333
"To" selects an odd-numbered GPR, and "Te" an even one. There are some
8.1-M instructions that have one too few bits in their register fields
and require registers of particular parity, without necessarily using
a consecutive even/odd pair.
Also, the constraint letter "t" should select an MVE q-register, when
MVE is present. This didn't need any source changes, but some extra
tests have been added.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: javed.absar, eraman, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60709
llvm-svn: 364331
Huihui Zhang