Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
This combiner breaks debug experience and should not be run when optimizations are disabled.
For example:
int main() {
int j = 0;
j += 2;
if (j == 2)
return 0;
return 5;
}
When debugging this code compiled in /O0, it should be valid to break at line "j+=2;" and edit the value of j. It should change the return value of the function.
Differential Revision: https://reviews.llvm.org/D19268
llvm-svn: 284014
The code used llvm basic block predecessors to decided where to insert phi
nodes. Instruction selection can and will liberally insert new machine basic
block predecessors. There is not a guaranteed one-to-one mapping from pred.
llvm basic blocks and machine basic blocks.
Therefore the current approach does not work as it assumes we can mark
predecessor machine basic block as needing a copy, and needs to know the set of
all predecessor machine basic blocks to decide when to insert phis.
Instead of computing the swifterror vregs as we select instructions, propagate
them at the end of instruction selection when the MBB CFG is complete.
When an instruction needs a swifterror vreg and we don't know the value yet,
generate a new vreg and remember this "upward exposed" use, and reconcile this
at the end of instruction selection.
This will only happen if the target supports promoting swifterror parameters to
registers and the swifterror attribute is used.
rdar://28300923
llvm-svn: 283617
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill
behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, nhaehnle, jyknight
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 282600
This check currently doesn't seem to do anything useful on any in-tree target:
On non-x86, it always evaluates to false, so we never hit the code path that
creates the shuffle with zero.
On x86, it just forwards to isShuffleMaskLegal(), which is a reasonable thing to
query in general, but doesn't make sense if only restricted to zero blends.
Differential Revision: https://reviews.llvm.org/D24625
llvm-svn: 282567
Summary:
Inline asm memory constraints can have the base or index register be assigned
to %r0 right now. Make sure that we assign only ADDR64 registers to the base
and index.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23367
llvm-svn: 279157
Normally, when an AND with a constant is lowered to NILL, the constant value is truncated to 16 bits. However, since r274066, ANDs whose results are used in a shift are caught by a different pattern that does not truncate. The instruction printer expects a 16-bit unsigned immediate operand for NILL, so this results in an abort.
This patch adds code to manually truncate the constant in this situation. The rest of the bits are then set, so we will detect a case for NILL "naturally" rather than using peephole optimizations.
Differential Revision: http://reviews.llvm.org/D21854
llvm-svn: 279105
Refactored so that a LSRUse owns its fixups, as oppsed to letting the
LSRInstance own them. This makes it easier to rate formulas for
LSRUses, since the fixups are available directly. The Offsets vector
has been removed since it was no longer necessary.
New target hook isFoldableMemAccessOffset(), which is used during formula
rating.
For SystemZ, this is useful to express that loads and stores with
float or vector types with a big/negative offset should be avoided in
loops. Without this, LSR will generate a lot of negative offsets that
would require extra instructions for loading the address.
Updated tests:
test/CodeGen/SystemZ/loop-01.ll
Reviewed by: Quentin Colombet and Ulrich Weigand.
https://reviews.llvm.org/D19152
llvm-svn: 278927
When expanding FP constants, we attempt to shrink doubles to floats and perform an extending load.
However, on SystemZ, and possibly on other targets (I've only confirmed the problem on SystemZ), the FP extending load instruction may convert SNaN into QNaN, or may cause an exception. So in the general case, we would still like to shrink FP constants, but SNaNs should be left as doubles.
Differential Revision: https://reviews.llvm.org/D22685
llvm-svn: 277602
Reverting this commit for now as it seems to be causing failures on
test-suite tests on the clang-ppc64le-linux-lnt bot.
This reverts commit r276044.
llvm-svn: 276068
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 276044
Summary: Add support for the z13 instructions LOCHI and LOCGHI which
conditionally load immediate values. Add target instruction info hooks so
that if conversion will allow predication of LHI/LGHI.
Author: RolandF
Reviewers: uweigand
Subscribers: zhanjunl
Commiting on behalf of Roland.
Differential Revision: http://reviews.llvm.org/D22117
llvm-svn: 275086
This adds a new SystemZ-specific intrinsic, llvm.s390.tdc.f(32|64|128),
which maps straight to the test data class instructions. A new IR pass
is added to recognize instructions that can be converted to TDC and
perform the necessary replacements.
Differential Revision: http://reviews.llvm.org/D21949
llvm-svn: 275016
On SystemZ, shift and rotate instructions only use the bottom 6 bits of the shift/rotate amount.
Therefore, if the amount is ANDed with an immediate mask that has all of the bottom 6 bits set, we
can remove the AND operation entirely.
Differential Revision: http://reviews.llvm.org/D21854
llvm-svn: 274650
This processor feature had been left out by mistake from the z13
ProcessorModel.
This time with updated test case. Thanks, Hans.
Reviewed by Ulrich Weigand.
llvm-svn: 274216
Summary: SystemZ shift instructions only use the last 6 bits of the shift
amount. When the result of an AND operation is used as a shift amount, this
means that we can use the NILL instruction (which operates on the last 16 bits)
rather than NILF (which operates on the last 32 bits) for a 16-bit savings in
instruction size.
Reviewers: uweigand
Subscribers: llvm-commits
Author: colpell
Committing on behalf of Elliot.
Differential Revision: http://reviews.llvm.org/D21686
llvm-svn: 274066
Summary:
Created a pattern to match 64-bit mode (and (xor x, -1), y)
to a shorter sequence of instructions.
Before the change, the canonical form is translated to:
xihf %r3, 4294967295
xilf %r3, 4294967295
ngr %r2, %r3
After the change, the canonical form is translated to:
ngr %r3, %r2
xgr %r2, %r3
Reviewers: zhanjunl, uweigand
Subscribers: llvm-commits
Author: assem
Committing on behalf of Assem.
Differential Revision: http://reviews.llvm.org/D21693
llvm-svn: 273887
Summary:
Recognize RISBG opportunities where the end result is narrower than the
original input - where a truncate separates the shift/and operations.
The motivating case is some code in postgres which looks like:
srlg %r2, %r0, 11
nilh %r2, 255
Reviewers: uweigand
Author: RolandF
Differential Revision: http://reviews.llvm.org/D21452
llvm-svn: 273433
This enables use of the 'R' and 'T' memory constraints for inline ASM
operands on SystemZ, which allow an index register as well as an
immediate displacement. This patch includes corresponding documentation
and test case updates.
As with the last patch of this kind, I moved the 'm' constraint to the
most general case, which is now 'T' (base + 20-bit signed displacement +
index register).
Author: colpell
Differential Revision: http://reviews.llvm.org/D21239
llvm-svn: 272547
Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
llvm-svn: 272419
This enables use of the 'S' constraint for inline ASM operands on
SystemZ, which allows for a memory reference with a signed 20-bit
immediate displacement. This patch includes corresponding documentation
and test case updates.
I've changed the 'T' constraint to match the new behavior for 'S', as
'T' also uses a long displacement (though index constraints are still
not implemented). I also changed 'm' to match the behavior for 'S' as
this will allow for a wider range of displacements for 'm', though
correct me if that's not the right decision.
Author: colpell
Differential Revision: http://reviews.llvm.org/D21097
llvm-svn: 272266
Summary:
The ordering of registers in BinaryRRF instructions are wrong, and
affects the copysign instruction (CPSDR). This results in the wrong
magnitude and sign being set.
Author: zhanjunl
Reviewers: kbarton, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20308
llvm-svn: 269922
Summary: On Linux, /usr/include/bits/byteswap-16.h defines __byteswap_16(x) as an inlined LRVH (Load Reversed Half-word) instruction. The SystemZ back-end did not support this opcode and the inlined assembly would cause a fatal error.
Reviewers: bryanpkc, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18732
llvm-svn: 269688
Currently, SelectionDAG assumes 8/16-bit cmpxchg returns either a sign
extended result, or a zero extended result. SystemZ takes a third
option by returning junk in the high bits (rotated contents of the other
bytes in the memory word). In that case, don't use Assert*ext, and
zero-extend the result ourselves if a comparison is needed.
Differential Revision: http://reviews.llvm.org/D19800
llvm-svn: 269075
SystemZ (and probably other targets as well) can fold a memory operand
by changing the opcode into a new instruction that as a side-effect
also clobbers the CC-reg.
In order to do this, liveness of that reg must first be checked. When
LIS is passed, getRegUnit() can be called on it and the right
LiveRange is computed on demand.
Reviewed by Matthias Braun.
http://reviews.llvm.org/D19861
llvm-svn: 269026
This introduces a SystemZ-specific "backchain" attribute on function, which
enables writing the frame backchain link as specified by the ABI. This will
be used to implement -mbackchain option in clang.
Differential Revision: http://reviews.llvm.org/D19889
Fixed in this version: added RegState::Define and RegState::Kill on R1D
in prologue.
llvm-svn: 268581
This introduces a SystemZ-specific "backchain" attribute on function, which
enables writing the frame backchain link as specified by the ABI. This will
be used to implement -mbackchain option in clang.
Differential Revision: http://reviews.llvm.org/D19889
llvm-svn: 268571
Summary:
Port rL265480, rL264754, rL265997 and rL266252 to SystemZ, in order to enable the Swift port on the architecture. SwiftSelf and SwiftError are assigned to R10 and R9, respectively, which are normally callee-saved registers. For more information, see:
RFC: Implementing the Swift calling convention in LLVM and Clang
https://groups.google.com/forum/#!topic/llvm-dev/epDd2w93kZ0
Reviewers: kbarton, manmanren, rjmccall, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19414
llvm-svn: 267823
This fixes PR22248 on s390x. The previous attempt at this was D19101,
which was before LOAD_STACK_GUARD existed. Compared to the previous
version, this always emits a rather ugly block of 4 instructions, involving
a thread pointer load that can't be shared with other potential users.
However, this is necessary for SSP - spilling the guard value (or thread
pointer used to load it) is counter to the goal, since it could be
overwritten along with the frame it protects.
Differential Revision: http://reviews.llvm.org/D19363
llvm-svn: 267340
This adds a conditional variant of CallBR instruction, CallBCR. Also,
it can be fused with integer comparisons, resulting in one of the new
C*BCall instructions.
In addition to CallBRCL limitations, this has another one: it won't
trigger if the function to call isn't already in %r1 - see f22 in the
test for an example (it's also why the loads in tests are volatile).
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18928
llvm-svn: 265933
This adds a conditional variant of CallJG instruction, CallBRCL.
It can be used for conditional sibling calls. Unfortunately, due
to IfCvt limitations, it only really works well for functions without
arguments.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18864
llvm-svn: 265814
Return is now considered a predicable instruction, and is converted
to a newly-added CondReturn (which maps to BCR to %r14) instruction by
the if conversion pass.
Also, fused compare-and-branch transform knows about conditional
returns, emitting the proper fused instructions for them.
This transform triggers on a *lot* of tests, hence the huge diffstat.
The changes are mostly jX to br %r14 -> bXr %r14.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D17339
llvm-svn: 265689
A cross-thread sequentially consistent fence should be lowered into
z/Architecture's BCR serialization instruction, instead of causing a
fatal error in the back-end.
Author: bryanpkc
Differential Revision: http://reviews.llvm.org/D18644
llvm-svn: 265292
Enable the SystemZ back-end to lower FRAMEADDR and RETURNADDR, which
previously would cause the back-end to crash. Currently, only a
frame count of zero is supported.
Author: bryanpkc
Differential Revision: http://reviews.llvm.org/D18514
llvm-svn: 265291
On the z13, it turns out to be more efficient to access a full
floating-point register than just the upper half (as done e.g.
by the LE and LER instructions).
Current code already takes this into account when loading from
memory by using the LDE instruction in place of LE. However,
we still generate LER, which shows the same performance issues
as LE in certain circumstances.
This patch changes the back-end to emit LDR instead of LER to
implement FP32 register-to-register copies on z13.
llvm-svn: 263431
According to the SystemZ ABI, 128-bit integer types should be
passed and returned via implicit reference. However, this is
not currently implemented at the LLVM IR level for the i128
type. This does not matter when compiling C/C++ code, since
clang will implement the implicit reference itself.
However, it turns out that when calling libgcc helper routines
operating on 128-bit integers, LLVM will use i128 argument and
return value types; the resulting code is not compatible with
the ABI used in libgcc, leading to crashes (see PR26559).
This should be simple to fix, except that i128 currently is not
even a legal type for the SystemZ back end. Therefore, common
code will already split arguments and return values into multiple
parts. The bulk of this patch therefore consists of detecting
such parts, and correctly handling passing via implicit reference
of a value split into multiple parts. If at some time in the
future, i128 becomes a legal type, this code can be removed again.
This fixes PR26559.
llvm-svn: 261325
Nirav Dave