Summary: This allows to convert any SExt to a ZExt when we know none of the extended bits are used, specially in cases where there are multiple uses of the value.
Reviewers: dmgreen, eli.friedman, spatel, lebedev.ri, nikic
Reviewed By: lebedev.ri, nikic
Subscribers: hiraditya, dmgreen, craig.topper, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60413
- Now all SalvageDebugInfo() calls will mark undef if the salvage
attempt fails.
Reviewed by: vsk, Orlando
Differential Revision: https://reviews.llvm.org/D78369
Bit-Tracking Dead Code Elimination (bdce) do not mark dbg.value as undef after
deleting instruction. which shows invalid state of variable in debugger. This
patches fixes this by marking the dbg.value as undef which depends on dead
instruction.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41925
Patch by kamlesh kumar!
Differential Revision: https://reviews.llvm.org/D70040
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
In addition to finding dead uses of instructions, also find dead uses
of function arguments, and replace them with zero as well.
I'm changing the way the known bits are computed here to remove the
coupling between the transfer function and the algorithm. It previously
relied on the first op being visited first and computing known bits --
unless the first op is not an instruction, in which case they're computed
on the second op. I could have adjusted this to check for "instruction
or argument", but I think it's better to avoid the repeated calculation
with an explicit flag.
Differential Revision: https://reviews.llvm.org/D56247
llvm-svn: 350435
If an instruction has no demanded bits, remove it directly during BDCE,
instead of leaving it for something else to clean up.
Differential Revision: https://reviews.llvm.org/D56185
llvm-svn: 350257
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The previous attempt to land this lead to miscompiles, because cases
where uses were initially dead but were later found to be live during
further analysis were not always correctly removed from the DeadUses
set. This is fixed now and the added test case demanstrates such an
instance.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 350188
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The test case has a couple of cases that are not simplified yet. In
particular, we're only looking at uses of instructions right now. I think
it would make sense to also extend this to arguments. Furthermore
DemandedBits doesn't yet know some of the tricks that InstCombine does
for the demanded bits or bitwise or/and/xor in combination with known
bits information.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 349674
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
Unlike the previous iteration of this patch, getDemandedBits() can now
again be called on arbirary (sized) instructions, even if they don't
have integer or vector of integer type. (For vector types the size of the
returned mask will now be the scalar size in bits though.)
The added LoopVectorize test case shows a case which triggered an
assertion failure with the previous attempt, because getDemandedBits()
was called on a pointer-typed instruction.
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348602
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
The getDemandedBits() method can now only be called on instructions that
have integer or vector of integer type. Previously it could be called on
any sized instruction (even if it was not particularly useful). The size
of the return value is now always the scalar size in bits (while
previously it was the type size in bits).
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348549
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
This results in 15 additional unique source variables in a stage2 build
of FileCheck (at '-Os -g'), with a negligible increase in the size of
the .debug_loc section.
llvm-svn: 325660
To clear assumptions that are potentially invalid after trivialization, we need
to walk the use/def chain. Normally, the only way to reach an instruction with
an unsized type is via an instruction that has side effects (or otherwise will
demand its input bits). That would stop the walk. However, if we have a
readnone function that returns an unsized type (e.g., void), we must avoid
asking for the demanded bits of the function call's return value. A
void-returning readnone function is always dead (and so we can stop walking the
use/def chain here), but the check is necessary to avoid asserting.
Fixes PR34211.
llvm-svn: 311014
The assert was added with r310779 and is usually correct,
but as the test shows, not always. The 'volatile' on the
load is needed to expose the faulty path because without
it, DemandedBits would return that the load is just dead
rather than not demanded, and so we wouldn't hit the
bogus assert.
Also, since the lambda is just a single-line now, get rid
of it and inline the DB.isAllOnesValue() calls.
This should fix (prevent execution of a faulty assert):
https://bugs.llvm.org/show_bug.cgi?id=34179
llvm-svn: 310842
a function's CFG when that CFG is unchanged.
This allows transformation passes to simply claim they preserve the CFG
and analysis passes to check for the CFG being preserved to remove the
fanout of all analyses being listed in all passes.
I've gone through and removed or cleaned up as many of the comments
reminding us to do this as I could.
Differential Revision: https://reviews.llvm.org/D28627
llvm-svn: 292054
The fix committed in r288851 doesn't cover all the cases.
In particular, if we have an instruction with side effects
which has a no non-dbg use not depending on the bits, we still
perform RAUW destroying the dbg.value's first argument.
Prevent metadata from being replaced here to avoid the issue.
Differential Revision: https://reviews.llvm.org/D27534
llvm-svn: 288987
BDCE has two phases:
1. It asks SimplifyDemandedBits if all the bits of an instruction are dead, and if so,
replaces all its uses with the constant zero.
2. Then, it asks SimplifyDemandedBits again if the instruction is really dead
(no side effects etc..) and if so, eliminates it.
Now, in 1) if all the bits of an instruction are dead, we may end up replacing a dbg use:
%call = tail call i32 (...) @g() #4, !dbg !15
tail call void @llvm.dbg.value(metadata i32 %call, i64 0, metadata !8, metadata !16), !dbg !17
->
%call = tail call i32 (...) @g() #4, !dbg !15
tail call void @llvm.dbg.value(metadata i32 0, i64 0, metadata !8, metadata !16), !dbg !17
but not eliminating the call because it may have arbitrary side effects.
In other words, we lose some debug informations.
This patch fixes the problem making sure that BDCE does nothing with the instruction if
it has side effects and no non-dbg uses.
Differential Revision: https://reviews.llvm.org/D27471
llvm-svn: 288851
The original commit was reverted because of a buildbot problem with LazyCallGraph::SCC handling (not related to the OptBisect handling).
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267231
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267022
GlobalsAA must by definition be preserved in function passes, but the passmanager doesn't know that. Make each pass explicitly preserve GlobalsAA.
llvm-svn: 247263
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Differential Revision: http://reviews.llvm.org/D11097
llvm-svn: 243766
Summary:
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Reviewers: rnk, JosephTremoulet, reames, nlewycky, rjmccall
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11041
llvm-svn: 241888
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231740
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
When visiting the initial list of "root" instructions (those which must always
be alive), for those that are integer-valued (such as invokes returning an
integer), we mark their bits as (initially) all dead (we might, obviously, find
uses of those bits later, but all bits are assumed dead until proven
otherwise). Don't do so, however, if we're already seen a use of those bits by
another root instruction (such as a store).
Fixes a miscompile of the sanitizer unit tests on x86_64.
Also, add a debug line for visiting the root instructions, and remove a debug
line which tried to print instructions being removed (printing dead
instructions is dangerous, and can sometimes crash).
llvm-svn: 229618
BDCE is a bit-tracking dead code elimination pass. It is based on ADCE (the
"aggressive DCE" pass), with the added capability to track dead bits of integer
valued instructions and remove those instructions when all of the bits are
dead.
Currently, it does not actually do this all-bits-dead removal, but rather
replaces the instruction's uses with a constant zero, and lets instcombine (and
the later run of ADCE) do the rest. Because we essentially get a run of ADCE
"for free" while tracking the dead bits, we also do what ADCE does and removes
actually-dead instructions as well (this includes instructions newly trivially
dead because all bits were dead, but not all such instructions can be removed).
The motivation for this is a case like:
int __attribute__((const)) foo(int i);
int bar(int x) {
x |= (4 & foo(5));
x |= (8 & foo(3));
x |= (16 & foo(2));
x |= (32 & foo(1));
x |= (64 & foo(0));
x |= (128& foo(4));
return x >> 4;
}
As it turns out, if you order the bit-field insertions so that all of the dead
ones come last, then instcombine will remove them. However, if you pick some
other order (such as the one above), the fact that some of the calls to foo()
are useless is not locally obvious, and we don't remove them (without this
pass).
I did a quick compile-time overhead check using sqlite from the test suite
(Release+Asserts). BDCE took ~0.4% of the compilation time (making it about
twice as expensive as ADCE).
I've not looked at why yet, but we eliminate instructions due to having
all-dead bits in:
External/SPEC/CFP2006/447.dealII/447.dealII
External/SPEC/CINT2006/400.perlbench/400.perlbench
External/SPEC/CINT2006/403.gcc/403.gcc
MultiSource/Applications/ClamAV/clamscan
MultiSource/Benchmarks/7zip/7zip-benchmark
llvm-svn: 229462
Diogo Sampaio