Summary:
While InstCombine trivially converts that `srem` into a `urem`,
it might happen later than wanted, in particular i'd like
for that to happen on https://godbolt.org/z/bwuEmJ test case
early in pipeline, before first instcombine run, just before `-mem2reg`.
SCEV should recognize this case natively.
Reviewers: mkazantsev, efriedma, nikic, reames
Reviewed By: efriedma
Subscribers: clementval, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82721
Summary:
The added assertion fails on the added test without the fix.
Reduced from test-suite/MultiSource/Benchmarks/MiBench/office-ispell/correct.c
In IR, getelementptr, obviously, takes pointer as it's base,
and returns a pointer.
When creating an SCEV expression, SCEV operands are sorted in hope
that it increases folding potential, and at the same time SCEVAddExpr's
type is the type of the last(!) operand.
Which means, in some exceedingly rare cases, pointer operand may happen to
end up not being the last operand, and as a result SCEV for GEP
will suddenly have a non-pointer return type.
We should ensure that does not happen.
In the end, actually storing the `Type *`, at the cost of increasing
memory footprint of `SCEVAddExpr`, appears to be the solution.
We can't just store a 'is a pointer' bit and create pointer type
on the fly since we don't have data layout in getType().
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=46457 | PR46457 ]]
Reviewers: efriedma, mkazantsev, reames, nikic
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82633
Summary:
This is boringly straight-forward, each iteration we see if
V is some expression that we can look into, and if it has
a single pointer operand, then set V to that operand
and repeat.
Reviewers: efriedma, mkazantsev, reames, nikic
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82632
This makes it usable from outside of SCEV,
while previously it was internal to the ScalarEvolution.cpp
In particular, i want to use it in an WIP alloca promotion helper pass,
to analyze if some SCEV is a multiple of some other SCEV.
Move ScalarEvolution::forgetLoopDispositions implementation to ScalarEvolution.cpp to remove the dependency.
Add implicit header dependency to source files where necessary.
Change isa<> to a variadic function template, so that it can be used to test against one of multiple types as follows:
isa<Type0, Type1, Type2>(Val)
Differential Revision: https://reviews.llvm.org/D81045
Summary:
That's just really wrong. While sure, if LHS is AddRec, and we could
propagate it's no-wrap flags, that doesn't make, because as long as
the operands of `or` had no common bits set, then the `add`
of these operands will never overflow: http://volta.cs.utah.edu:8080/z/gmt7Sy
IOW we need no propagation/detection, we are free to just set NUW+NSW.
But as rG39e3683534c83573da5c8b70c8adfb43948f601f shows,
even when the old code failed to "deduce" flags,
we'd eventually re-deduce them somewhere, later.
So let's just set them.
Reviewers: mkazantsev, reames, sanjoy, efriedma
Reviewed By: efriedma
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81246
Summary:
There was this comment here previously:
```
- // It is currently not resolved how to interpret NSW for left
- // shift by BitWidth - 1, so we avoid applying flags in that
- // case. Remove this check (or this comment) once the situation
- // is resolved. See
- // http://lists.llvm.org/pipermail/llvm-dev/2015-April/084195.html
- // and http://reviews.llvm.org/D8890 .
```
But langref was fixed in rL286785, and the behavior is pretty obvious:
http://volta.cs.utah.edu:8080/z/MM4WZP
^ nuw can always be propagated. nsw can be propagated if
either nuw is specified, or the shift is by *less* than bitwidth-1.
This mimics similar D81189 Reassociate change, alive2 is happy about that one.
I'm not sure `NUW` isn't being printed, but that seems unrelated.
Reviewers: mkazantsev, reames, sanjoy, nlopes, craig.topper, efriedma
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81243
Summary:
Users of SCEV reasonably assume that multiplication of two constant
SCEVs will in turn be constant.
However, that is not always the case:
First, we can get here with reached depth limit, and will create
MultExpr SCEV `C1 * C2` and cache it.
Then, we can get here with the same operands, but with small depth
level. But this time we will find existing MultExpr SCEV and return
it, instead of expected constant SCEV.
This patch changes getMultExpr to not apply depth limit to all constant
operands expression, allowing them to be folded.
Reviewers: reames, mkazantsev
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79893
Summary:
This is RFC for fixes in poison-related functions of ValueTracking.
These functions assume that a value can be poison bitwisely, but the semantics
of bitwise poison is not clear at the moment.
Allowing a value to have bitwise poison adds complexity to reasoning about
correctness of optimizations.
This patch makes the analysis functions simply assume that a value is
either fully poison or not, which has been used to understand the correctness
of a few previous optimizations.
The bitwise poison semantics seems to be only used by these functions as well.
In terms of implementation, using value-wise poison concept makes existing
functions do more precise analysis, which is what this patch contains.
Reviewers: spatel, lebedev.ri, jdoerfert, reames, nikic, nlopes, regehr
Reviewed By: nikic
Subscribers: fhahn, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78503
Summary:
This is RFC for fixes in poison-related functions of ValueTracking.
These functions assume that a value can be poison bitwisely, but the semantics
of bitwise poison is not clear at the moment.
Allowing a value to have bitwise poison adds complexity to reasoning about
correctness of optimizations.
This patch makes the analysis functions simply assume that a value is
either fully poison or not, which has been used to understand the correctness
of a few previous optimizations.
The bitwise poison semantics seems to be only used by these functions as well.
In terms of implementation, using value-wise poison concept makes existing
functions do more precise analysis, which is what this patch contains.
Reviewers: spatel, lebedev.ri, jdoerfert, reames, nikic, nlopes, regehr
Reviewed By: nikic
Subscribers: fhahn, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78503
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
For the PHI node
%1 = phi [%A, %entry], [%X, %latch]
it is incorrect to use SCEV of backedge val %X as an exit value
of PHI unless %X is loop invariant.
This is because exit value of %1 is value of %X at one-before-last
iteration of the loop.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D73181
Because we have to use a ConstantExpr at some point, the canonical form
isn't set in stone, but this seems reasonable.
The pretty sizeof(<vscale x 4 x i32>) dumping is a relic of ancient
LLVM; I didn't have to touch that code. :)
Differential Revision: https://reviews.llvm.org/D75887
Calculating SCEVs can be cumbersome, and may take very long time (even
hours, for very long expressions). To prevent recalculating expressions
over and over again, we cache them.
This change add cache queries to key positions, to prevent recalculation
of the expressions.
Fix PR43571.
Differential Revision: https://reviews.llvm.org/D70097
Summary:
This patch moves the getIndexExpressionsFromGEP function from polly
into ScalarEvolution so that both polly and DependenceAnalysis can
use it for the purpose of subscript delinearization when the array
sizes are not parametric.
Authored By: bmahjour
Reviewer: Meinersbur, sebpop, fhahn, dmgreen, grosser, etiotto, bollu
Reviewed By: Meinersbur
Subscribers: hiraditya, arphaman, Whitney, ppc-slack, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73995
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
Summary:
Loop unroll spends a lot of time in SCEVs processing in case when a function
contains hundreds of simple 'for' loops with a quite complex arrays indexes like
for (int i = 0; i < 8; ++i) {
for (int j = 0; j < 32; ++j) {
C[j*8+i] = B[j*32+i+128] + A[i*64+128];
}
}
for (int i = 0; i < 8; ++i) {
for (int j = 0; j < 8; ++j) {
for (int k = 0; k < 32; ++k) {
D[k*64+i*8+j] = D[k*64+i*8+j] + E[i+16] * C[k*8+j+256];
}
}
}
The patch improves loop unroll speed since isLoopBackedgeGuardedByCond takes
much less time than isLoopEntryGuardedByCond in the edge case.
Reviewers: skatkov, sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: fhahn, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72929
If addrecexpr has nuw flag, the value should never be less than its
start value and start value does not required to be SCEVConstant.
Reviewed By: nikic, sanjoy
Differential Revision: https://reviews.llvm.org/D71690
Teach SCEV about the @loop.decrement.reg intrinsic, which has exactly the same
semantics as a sub expression. This allows us to query hardware-loops, which
contain this @loop.decrement.reg intrinsic, so that we can calculate iteration
counts, exit values, etc. of hardwareloops.
This "int_loop_decrement_reg" intrinsic is defined as "IntrNoDuplicate". Thus,
while hardware-loops and tripcounts now become analysable by SCEV, this
prevents the usual loop transformations from applying transformations on
hardware-loops, which is what we want at this point, for which I have added
test cases for loopunrolling and IndVarSimplify and LFTR.
Differential Revision: https://reviews.llvm.org/D71563
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
New pass manager doesn't use verifyAnalysis, so currently there is no
way to call SCEV verification from command line when new PM is used.
This patch adds a pass that allows you to do that.
Reviewers: reames, fhahn, sanjoy.google, nikic
Reviewed By: fhahn
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70423
For the various trip-count tests, the classification isn't useful and makes the auto-generated tests super verbose. By skipping it, we make the auto-gen tests closer to the manually written ones. Up next: auto-genning a bunch of the existings tests.
Simple loop unswitch likes to leave around unsimplified and/or/xors. SCEV today bails out on these idioms which is unfortunate in general, and specifically for the unswitch interaction.
Differential Revision: https://reviews.llvm.org/D70459
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
This patch fixes two issues noticed by inspection when going to enable the loop predication code in IndVarSimplify.
Issue 1 - Both the LoopPredication transform, and the already on by default optimizeLoopExits transform, modify the exit count of the exits they modify. (either to 0 or Infinity) Looking at the code more closely, this was not reflected into SCEV and we were instead running later transforms with incorrect SCEVs. Fixing this requires forgetting the loop, weakening a too strong assert, and updating SCEV to not pessimize results when a loop is provable untaken. I haven't been able to find a test case to demonstrate the miscompile.
Issue 2 - For modules without a data layout, we can end up with unsized pointer typed exit counts. Just bail out of this case.
I think these are the last two issues which need addressed before we enable this by default. The code has already survived a decent amount of fuzzing without revealing either of the above.
Differential Revision: https://reviews.llvm.org/D69695
We were already going to all of the trouble of computing maximum constant exit counts for each loop exit, we might as well expose them through the API. The change in IndVars is mostly to demonstrate that the wired up code works, but it als very slightly strengthens the transform. The strengthened case is rather narrow though: it requires one exactly analyzeable exit, one imprecisely analyzeable exit (with the upper bound less than the precise one), and one unanalyzeable exit. I coudn't construct a reasonably stable test case.
This does increase the memory usage of the BackedgeTakenCount by a factor of 2 in the worst case.
I also noticed the loop in IndVars is O(#Exits ^ 2). This doesn't change with this patch. A future patch will cache this result inside of SCEV to avoid requering.
This is a first step in figuring out a proper API for maximum (non constant) exit counts. This may evolve a bit as we get experience with the API needs; suggestions very welcome. This patch just tried to provide a framework that we can later add maximum too in a clean and obvious way.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69216
llvm-svn: 375398
This is a common idiom which arises after induction variables are widened, and we have two or more exit conditions. Interestingly, we don't have instcombine or instsimplify support for this either.
Differential Revision: https://reviews.llvm.org/D69006
llvm-svn: 375349
Currently -verify-scev only fails if there is a constant difference
between two BE counts. This misses a lot of cases.
This patch adds a -verify-scev-strict options, which fails for any
non-zero differences, if used together with -verify-scev.
With the stricter checking, some unit tests fail because
of mis-matches, especially around IndVarSimplify.
If there is no reason I am missing for just checking constant deltas, I
am planning on looking into the various failures.
Reviewers: efriedma, sanjoy.google, reames, atrick
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D68592
llvm-svn: 374535
This reverts r366419 because the analysis performed is within the context of
the loop and it's only valid to add wrapping flags to "global" expressions if
they're always correct.
llvm-svn: 373184
At present, `-scalar-evolution-max-iterations` is a `cl::Optional`
option, which means it demands to be passed exactly zero or one times.
Our build system makes it pretty tricky to guarantee this. We often
accidentally pass the flag more than once (but always with the same
value) which results in an error, after which compilation fails:
```
clang (LLVM option parsing): for the -scalar-evolution-max-iterations option: may only occur zero or one times!
```
It seems reasonable to allow -scalar-evolution-max-iterations to be
passed more than once. Quoting the [[ http://llvm.org/docs/CommandLine.html#controlling-the-number-of-occurrences-required-and-allowed | documentation ]]:
> The cl::ZeroOrMore modifier ... indicates that your program will allow the option to be specified zero or more times.
> ...
> If an option is specified multiple times for an option of the cl::opt class, only the last value will be retained.
Original patch by: Enrico Bern Hardy Tanuwidjaja <etanuwid@fb.com>
Differential Revision: https://reviews.llvm.org/D67512
llvm-svn: 372346
We were failing to compute trip counts (both exact and maximum) for any loop which involved a comparison against either an umin or smin. It looks like this simply got missed when we added smin/umin to SCEV. (Note: umin was submitted separately earlier today. Turned out two folks hit this at the same time.)
Differential Revision: https://reviews.llvm.org/D67514
llvm-svn: 371776
This patch adds support for SCEVUMinExpr to getRangeRef,
similar to the support for SCEVUMaxExpr.
Reviewers: sanjoy.google, efriedma, reames, nikic
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D67177
llvm-svn: 371768
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Without this patch computeConstantDifference returns None for cases like
these:
computeConstantDifference(%x, %x)
computeConstantDifference({%x,+,16}, {%x,+,16})
Differential Revision: https://reviews.llvm.org/D65474
llvm-svn: 368193
We haven't changed the set of users, just specialized an operand for those users. Given that, the previous wrap flags must still be correct.
Sorry for the lack of test case. Noticed this while working on something else, and haven't figured out to exercise this standalone.
llvm-svn: 365053
The previous output was next to useless if *any* exit was not computable. If we have more than one exit, show the exit count for each so that it's easier to see what's going from with SCEV analysis when debugging.
llvm-svn: 364579
This patch really contains two pieces:
Teach SCEV how to fold a phi in the header of a loop to the value on the backedge when a) the backedge is known to execute at least once, and b) the value is safe to use globally within the scope dominated by the original phi.
Teach IndVarSimplify's rewriteLoopExitValues to allow loop invariant expressions which already exist (and thus don't need new computation inserted) even in loops where we can't optimize away other uses.
Differential Revision: https://reviews.llvm.org/D63224
llvm-svn: 363619
Based on D59959, this switches SCEV to use unsigned/signed range
intersection based on the sign hint. This will prefer non-wrapping
ranges in the relevant domain. I've left the one intersection in
getRangeForAffineAR() to use the smallest intersection heuristic,
as there doesn't seem to be any obvious preference there.
Differential Revision: https://reviews.llvm.org/D60035
llvm-svn: 363490
SCEV does not propagate arguments through one-input Phis so as to make it easy for the SCEV expander (and related code) to preserve LCSSA. It's not entirely clear this restriction is neccessary, but for the moment it exists. For this reason, we don't analyze single-entry phi inputs. However it is possible that when an this input leaves the loop through LCSSA Phi, it is a provable constant. Missing that results in an order of optimization issue in loop exit value rewriting where we miss some oppurtunities based on order in which we visit sibling loops.
This patch teaches computeSCEVAtScope about this case. We can generalize it later, but so far we can only replace LCSSA Phis with their constant loop-exiting values. We should probably also add similiar logic directly in the SCEV construction path itself.
Patch by: mkazantsev (with revised commit message by me)
Differential Revision: https://reviews.llvm.org/D58113
llvm-svn: 363180
The issue is that if we have a loop with multiple predecessors outside the loop, the code was expecting to merge them and only return if equal, but instead returned the first one seen.
I have no idea if this actually tripped anywhere. I noticed it by accident when reading the code and have no idea how to go about constructing a test case.
llvm-svn: 363112
Summary:
Currently we express umin as `~umax(~x, ~y)`. However, this becomes
a problem for operands in non-integral pointer spaces, because `~x`
is not something we can compute for `x` non-integral. However, since
comparisons are generally still allowed, we are actually able to
express `umin(x, y)` directly as long as we don't try to express is
as a umax. Support this by adding an explicit umin/smin representation
to SCEV. We do this by factoring the existing getUMax/getSMax functions
into a new function that does all four. The previous two functions were
largely identical.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D50167
llvm-svn: 360159
Summary:
Commit
rL331949: SCEV] Do not use induction in isKnownPredicate for simplification umax
changed the codepath for umax from isKnownPredicate to
isKnownViaNonRecursiveReasoning to avoid compile time blow up (and as
I found out also stack overflows). However, there is an exact copy of
the code for umax that was lacking this change. In D50167 I want to unify
these codepaths, but to avoid that being a behavior change for the smax
case, pull this independent bit out of it.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D61166
llvm-svn: 359693
This reverts commit 7bf4d7c07f2fac862ef34c82ad0fef6513452445.
After thinking about this more, this isn't right, the range is not exact
in the same sense as makeExactICmpRegion(). This needs a separate
function.
llvm-svn: 358876
Following D60632 makeGuaranteedNoWrapRegion() always returns an
exact nowrap region. Rename the function accordingly. This is in
line with the naming of makeExactICmpRegion().
llvm-svn: 358875
ConstantRanges have an annoying special case: If upper and lower are
the same, it can be either an empty or a full set. When constructing
constant ranges nearly always a full set is intended, but this still
requires an explicit check in many places.
This revision adds a getNonEmpty() constructor that disambiguates this
case: If upper and lower are the same, a full set is created.
Differential Revision: https://reviews.llvm.org/D60947
llvm-svn: 358854
This adds a WithOverflowInst class with a few helper methods to get
the underlying binop, signedness and nowrap type and makes use of it
where sensible. There will be two more uses in D60650/D60656.
The refactorings are all NFC, though I left some TODOs where things
could be improved. In particular we have two places where add/sub are
handled but mul isn't.
Differential Revision: https://reviews.llvm.org/D60668
llvm-svn: 358512
Summary:
Create a method to forget everything in SCEV.
Add a cl::opt and PassManagerBuilder option to use this in LoopUnroll.
Motivation: Certain Halide applications spend a very long time compiling in forgetLoop, and prefer to forget everything and rebuild SCEV from scratch.
Sample difference in compile time reduction: 21.04 to 14.78 using current ToT release build.
Testcase showcasing this cannot be opensourced and is fairly large.
The option disabled by default, but it may be desirable to enable by
default. Evidence in favor (two difference runs on different days/ToT state):
File Before (s) After (s)
clang-9.bc 7267.91 6639.14
llvm-as.bc 194.12 194.12
llvm-dis.bc 62.50 62.50
opt.bc 1855.85 1857.53
File Before (s) After (s)
clang-9.bc 8588.70 7812.83
llvm-as.bc 196.20 194.78
llvm-dis.bc 61.55 61.97
opt.bc 1739.78 1886.26
Reviewers: sanjoy
Subscribers: mehdi_amini, jlebar, zzheng, javed.absar, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60144
llvm-svn: 358304
Summary:
This lets us avoid e.g. checking if A >=s B in getSMaxExpr(A, B) if we've
already established that (A smax B) is the best we can do.
Fixes PR41225.
Reviewers: asbirlea
Subscribers: mcrosier, jlebar, bixia, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60010
llvm-svn: 357320
This adds ConstantRange::getFull(BitWidth) and
ConstantRange::getEmpty(BitWidth) named constructors as more readable
alternatives to the current ConstantRange(BitWidth, /* full */ false)
and similar. Additionally private getFull() and getEmpty() member
functions are added which return a full/empty range with the same bit
width -- these are commonly needed inside ConstantRange.cpp.
The IsFullSet argument in the ConstantRange(BitWidth, IsFullSet)
constructor is now mandatory for the few usages that still make use of it.
Differential Revision: https://reviews.llvm.org/D59716
llvm-svn: 356852
Summary:
This fixes an extremely long compile time caused by recursive analysis
of truncs, which were not previously subject to any depth limits unlike
some of the other ops. I decided to use the same control used for
sext/zext, since the routines analyzing these are sometimes mutually
recursive with the trunc analysis.
Reviewers: mkazantsev, sanjoy
Subscribers: sanjoy, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58994
llvm-svn: 355949
In some cases, MaxBECount can be less precise than ExactBECount for AND
and OR (the AND case was PR26207). In the OR test case, both ExactBECounts are
undef, but MaxBECount are different, so we hit the assertion below. This
patch uses the same solution the AND case already uses.
Assertion failed:
((isa<SCEVCouldNotCompute>(ExactNotTaken) || !isa<SCEVCouldNotCompute>(MaxNotTaken))
&& "Exact is not allowed to be less precise than Max"), function ExitLimit
This patch also consolidates test cases for both AND and OR in a single
test case.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=13245
Reviewers: sanjoy, efriedma, mkazantsev
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D58853
llvm-svn: 355259
The value stored in SCEVConstant is of type ConstantInt*, which can
never be UndefValue. So we should never hit that code.
Reviewers: mkazantsev, sanjoy
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D58851
llvm-svn: 355257
Currently, SCEV creates SCEVUnknown for every node of unreachable code. If we
have a huge amounts of such code, we will be littering SE with these nodes. We could
just state that they all are undef and save some memory.
Differential Revision: https://reviews.llvm.org/D57567
Reviewed By: sanjoy
llvm-svn: 353017
Currently SCEV attempts to limit transformations so that they do not work with
big SCEVs (that may take almost infinite compile time). But for this, it uses heuristics
such as recursion depth and number of operands, which do not give us a guarantee
that we don't actually have big SCEVs. This situation is still possible, though it is not
likely to happen. However, the bug PR33494 showed a bunch of simple corner case
tests where we still produce huge SCEVs, even not reaching big recursion depth etc.
This patch introduces a concept of 'huge' SCEVs. A SCEV is huge if its expression
size (intoduced in D35989) exceeds some threshold value. We prohibit optimizing
transformations if any of SCEVs we are dealing with is huge. This gives us a reliable
check that we don't spend too much time working with them.
As the next step, we can possibly get rid of old limiting mechanisms, such as recursion
depth thresholds.
Differential Revision: https://reviews.llvm.org/D35990
Reviewed By: reames
llvm-svn: 352728
The code of AddRec simplification is using wrong loop when it creates a new
AddRecExpr. It should be using AddRecLoop which we have saved and against which
all gate checks are made, and not calling AddRec->getLoop() over and over
again because AddRec may change and become an AddRecurrency from outer loop
during the transform iterations.
Considering this change trivial, commiting for postcommit review.
llvm-svn: 352451
This patch introduces the field `ExpressionSize` in SCEV. This field is
calculated only once on SCEV creation, and it represents the complexity of
this SCEV from arithmetical point of view (not from the point of the number
of actual different SCEV nodes that are used in the expression). Roughly
saying, it is the number of operands and operations symbols when we print this
SCEV.
A formal definition is following: if SCEV `X` has operands
`Op1`, `Op2`, ..., `OpN`,
then
Size(X) = 1 + Size(Op1) + Size(Op2) + ... + Size(OpN).
Size of SCEVConstant and SCEVUnknown is one.
Expression size may be used as a universal way to limit SCEV transformations
for huge SCEVs. Currently, we have a bunch of options that represents various
limits (such as recursion depth limit) that may not make any sense from the
point of view of a LLVM users who is not familiar with SCEV internals, and all
these different options pursue one goal. A more general rule that may
potentially allow us to get rid of this redundancy in options is "do not make
transformations with SCEVs of huge size". It can apply to all SCEV traversals
and transformations that may need to visit a SCEV node more than once, hence
they are prone to combinatorial explosions.
This patch only introduces SCEV sizes calculation as NFC, its utilization will
be introduced in follow-up patches.
Differential Revision: https://reviews.llvm.org/D35989
Reviewed By: reames
llvm-svn: 351725
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
We have a lot of various bugs that are caused by misuse of SCEV (in particular in LV),
all of them can simply be described as "we ask SCEV to prove some fact on invalid IR".
Some of examples of those are PR36311, PR37221, PR39160.
The problem is that these failues manifest differently (what we saw was failure of various
asserts across SCEV, but there can also be miscompiles). This patch adds an assert into two
SCEV methods that strongly rely on correctness of the IR and are involved in known failues.
This will at least allow us to have a clear indication of what was wrong in this case.
This patch also fixes a unit test with incorrect IR that fails this verification.
Differential Revision: https://reviews.llvm.org/D52930
Reviewed By: fhahn
llvm-svn: 346389
When we calculate a product of 2 AddRecs, we end up making quite massive
computations to deduce the operands of resulting AddRec. This process can
be optimized by computing all args of intermediate sum and then calling
`getAddExpr` once rather than calling `getAddExpr` with intermediate
result every time a new argument is computed.
Differential Revision: https://reviews.llvm.org/D53189
Reviewed By: rtereshin
llvm-svn: 345813
SCEV's transform that turns `{A1,+,A2,+,...,+,An}<L> * {B1,+,B2,+,...,+,Bn}<L>` into
a single AddRec of size `2n+1` with complex combinatorial coefficients can easily
trigger exponential growth of the SCEV (in case if nothing gets folded and simplified).
We tried to restrain this transform using the option `scalar-evolution-max-add-rec-size`,
but its default value seems to be insufficiently small: the test attached to this patch
with default value of this option `16` has a SCEV of >3M symbols (when printed out).
This patch reduces the simplification limit. It is not a cure to combinatorial
explosions, but at least it reduces this corner case to something more or less
reasonable.
Differential Revision: https://reviews.llvm.org/D53282
Reviewed By: sanjoy
llvm-svn: 344584
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
This reverts r319889.
Unfortunately, wrapping flags are not a part of SCEV's identity (they
do not participate in computing a hash value or in equality
comparisons) and in fact they could be assigned after the fact w/o
rebuilding a SCEV.
Grep for const_cast's to see quite a few of examples, apparently all
for AddRec's at the moment.
So, if 2 expressions get built in 2 slightly different ways: one with
flags set in the beginning, the other with the flags attached later
on, we may end up with 2 expressions which are exactly the same but
have their operands swapped in one of the commutative N-ary
expressions, and at least one of them will have "sorted by complexity"
invariant broken.
2 identical SCEV's won't compare equal by pointer comparison as they
are supposed to.
A real-world reproducer is added as a regression test: the issue
described causes 2 identical SCEV expressions to have different order
of operands and therefore compare not equal, which in its turn
prevents LoadStoreVectorizer from vectorizing a pair of consecutive
loads.
On a larger example (the source of the test attached, which is a
bugpoint) I have seen even weirder behavior: adding a constant to an
existing SCEV changes the order of the existing terms, for instance,
getAddExpr(1, ((A * B) + (C * D))) returns (1 + (C * D) + (A * B)).
Differential Revision: https://reviews.llvm.org/D40645
llvm-svn: 340777
as well as sext(C + x + ...) -> (D + sext(C-D + x + ...))<nuw><nsw>
similar to the equivalent transformation for zext's
if the top level addition in (D + (C-D + x * n)) could be proven to
not wrap, where the choice of D also maximizes the number of trailing
zeroes of (C-D + x * n), ensuring homogeneous behaviour of the
transformation and better canonicalization of such AddRec's
(indeed, there are 2^(2w) different expressions in `B1 + ext(B2 + Y)` form for
the same Y, but only 2^(2w - k) different expressions in the resulting `B3 +
ext((B4 * 2^k) + Y)` form, where w is the bit width of the integral type)
This patch generalizes sext(C1 + C2*X) --> sext(C1) + sext(C2*X) and
sext{C1,+,C2} --> sext(C1) + sext{0,+,C2} transformations added in
r209568 relaxing the requirements the following way:
1. C2 doesn't have to be a power of 2, it's enough if it's divisible by 2
a sufficient number of times;
2. C1 doesn't have to be less than C2, instead of extracting the entire
C1 we can split it into 2 terms: (00...0XXX + YY...Y000), keep the
second one that may cause wrapping within the extension operator, and
move the first one that doesn't affect wrapping out of the extension
operator, enabling further simplifications;
3. C1 and C2 don't have to be positive, splitting C1 like shown above
produces a sum that is guaranteed to not wrap, signed or unsigned;
4. in AddExpr case there could be more than 2 terms, and in case of
AddExpr the 2nd and following terms and in case of AddRecExpr the
Step component don't have to be in the C2*X form or constant
(respectively), they just need to have enough trailing zeros,
which in turn could be guaranteed by means other than arithmetics,
e.g. by a pointer alignment;
5. the extension operator doesn't have to be a sext, the same
transformation works and profitable for zext's as well.
Apparently, optimizations like SLPVectorizer currently fail to
vectorize even rather trivial cases like the following:
double bar(double *a, unsigned n) {
double x = 0.0;
double y = 0.0;
for (unsigned i = 0; i < n; i += 2) {
x += a[i];
y += a[i + 1];
}
return x * y;
}
If compiled with `clang -std=c11 -Wpedantic -Wall -O3 main.c -S -o - -emit-llvm`
(!{!"clang version 7.0.0 (trunk 337339) (llvm/trunk 337344)"})
it produces scalar code with the loop not unrolled with the unsigned `n` and
`i` (like shown above), but vectorized and unrolled loop with signed `n` and
`i`. With the changes made in this commit the unsigned version will be
vectorized (though not unrolled for unclear reasons).
How it all works:
Let say we have an AddExpr that looks like (C + x + y + ...), where C
is a constant and x, y, ... are arbitrary SCEVs. Let's compute the
minimum number of trailing zeroes guaranteed of that sum w/o the
constant term: (x + y + ...). If, for example, those terms look like
follows:
i
XXXX...X000
YYYY...YY00
...
ZZZZ...0000
then the rightmost non-guaranteed-zero bit (a potential one at i-th
position above) can change the bits of the sum to the left (and at
i-th position itself), but it can not possibly change the bits to the
right. So we can compute the number of trailing zeroes by taking a
minimum between the numbers of trailing zeroes of the terms.
Now let's say that our original sum with the constant is effectively
just C + X, where X = x + y + .... Let's also say that we've got 2
guaranteed trailing zeros for X:
j
CCCC...CCCC
XXXX...XX00 // this is X = (x + y + ...)
Any bit of C to the left of j may in the end cause the C + X sum to
wrap, but the rightmost 2 bits of C (at positions j and j - 1) do not
affect wrapping in any way. If the upper bits cause a wrap, it will be
a wrap regardless of the values of the 2 least significant bits of C.
If the upper bits do not cause a wrap, it won't be a wrap regardless
of the values of the 2 bits on the right (again).
So let's split C to 2 constants like follows:
0000...00CC = D
CCCC...CC00 = (C - D)
and represent the whole sum as D + (C - D + X). The second term of
this new sum looks like this:
CCCC...CC00
XXXX...XX00
----------- // let's add them up
YYYY...YY00
The sum above (let's call it Y)) may or may not wrap, we don't know,
so we need to keep it under a sext/zext. Adding D to that sum though
will never wrap, signed or unsigned, if performed on the original bit
width or the extended one, because all that that final add does is
setting the 2 least significant bits of Y to the bits of D:
YYYY...YY00 = Y
0000...00CC = D
----------- <nuw><nsw>
YYYY...YYCC
Which means we can safely move that D out of the sext or zext and
claim that the top-level sum neither sign wraps nor unsigned wraps.
Let's run an example, let's say we're working in i8's and the original
expression (zext's or sext's operand) is 21 + 12x + 8y. So it goes
like this:
0001 0101 // 21
XXXX XX00 // 12x
YYYY Y000 // 8y
0001 0101 // 21
ZZZZ ZZ00 // 12x + 8y
0000 0001 // D
0001 0100 // 21 - D = 20
ZZZZ ZZ00 // 12x + 8y
0000 0001 // D
WWWW WW00 // 21 - D + 12x + 8y = 20 + 12x + 8y
therefore zext(21 + 12x + 8y) = (1 + zext(20 + 12x + 8y))<nuw><nsw>
This approach could be improved if we move away from using trailing
zeroes and use KnownBits instead. For instance, with KnownBits we could
have the following picture:
i
10 1110...0011 // this is C
XX X1XX...XX00 // this is X = (x + y + ...)
Notice that some of the bits of X are known ones, also notice that
known bits of X are interspersed with unknown bits and not grouped on
the rigth or left.
We can see at the position i that C(i) and X(i) are both known ones,
therefore the (i + 1)th carry bit is guaranteed to be 1 regardless of
the bits of C to the right of i. For instance, the C(i - 1) bit only
affects the bits of the sum at positions i - 1 and i, and does not
influence if the sum is going to wrap or not. Therefore we could split
the constant C the following way:
i
00 0010...0011 = D
10 1100...0000 = (C - D)
Let's compute the KnownBits of (C - D) + X:
XX1 1 = carry bit, blanks stand for known zeroes
10 1100...0000 = (C - D)
XX X1XX...XX00 = X
--- -----------
XX X0XX...XX00
Will this add wrap or not essentially depends on bits of X. Adding D
to this sum, however, is guaranteed to not to wrap:
0 X
00 0010...0011 = D
sX X0XX...XX00 = (C - D) + X
--- -----------
sX XXXX XX11
As could be seen above, adding D preserves the sign bit of (C - D) +
X, if any, and has a guaranteed 0 carry out, as expected.
The more bits of (C - D) we constrain, the better the transformations
introduced here canonicalize expressions as it leaves less freedom to
what values the constant part of ((C - D) + x + y + ...) can take.
Reviewed By: mzolotukhin, efriedma
Differential Revision: https://reviews.llvm.org/D48853
llvm-svn: 337943
if the top level addition in (D + (C-D + x + ...)) could be proven to
not wrap, where the choice of D also maximizes the number of trailing
zeroes of (C-D + x + ...), ensuring homogeneous behaviour of the
transformation and better canonicalization of such expressions.
This enables better canonicalization of expressions like
1 + zext(5 + 20 * %x + 24 * %y) and
zext(6 + 20 * %x + 24 * %y)
which get both transformed to
2 + zext(4 + 20 * %x + 24 * %y)
This pattern is common in address arithmetics and the transformation
makes it easier for passes like LoadStoreVectorizer to prove that 2 or
more memory accesses are consecutive and optimize (vectorize) them.
Reviewed By: mzolotukhin
Differential Revision: https://reviews.llvm.org/D48853
llvm-svn: 337859
SCEV tries to constant-fold arguments of trunc operands in SCEVAddExpr, and when it does
that, it passes wrong flags into the recursion. It is only valid to pass flags that are proved for
narrow type into a computation in wider type if we can prove that trunc instruction doesn't
actually change the value. If it did lose some meaningful bits, we may end up proving wrong
no-wrap flags for sum of arguments of trunc.
In the provided test we end up with `nuw` where it shouldn't be because of this bug.
The solution is to conservatively pass `SCEV::FlagAnyWrap` which is always a valid thing to do.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D49471
llvm-svn: 337435
It's a bit neater to write T.isIntOrPtrTy() over `T.isIntegerTy() ||
T.isPointerTy()`.
I used Python's re.sub with this regex to update users:
r'([\w.\->()]+)isIntegerTy\(\)\s*\|\|\s*\1isPointerTy\(\)'
llvm-svn: 336462
Summary:
Comment on Transforms/LoopVersioning/incorrect-phi.ll: With the change
SCEV is able to prove that the loop doesn't wrap-self (due to zext i16
to i64), disabling the entire loop versioning pass. Removed the zext and
just use i64.
Reviewers: sanjoy
Subscribers: jlebar, hiraditya, javed.absar, bixia, llvm-commits
Differential Revision: https://reviews.llvm.org/D48409
llvm-svn: 336140
We can have AddRec with loops having many predecessors.
This changes an assert to an early return.
Differential Revision: https://reviews.llvm.org/D48766
llvm-svn: 335965
Summary:
This initiates a discussion on changing Polly accordingly while re-applying r335197 (D48338).
I have never worked on Polly. The proposed change to param_div_div_div_2.ll is not educated, but just patterns that match the output.
All LLVM files are already reviewed in D48338.
Reviewers: jdoerfert, bollu, efriedma
Subscribers: jlebar, sanjoy, hiraditya, llvm-commits, bixia
Differential Revision: https://reviews.llvm.org/D48453
llvm-svn: 335292
Summary:
Try to match udiv and urem patterns, and sink zext down to the leaves.
I'm not entirely sure why some unrelated tests change, but the added <nsw>s seem right.
Reviewers: sanjoy
Subscribers: jlebar, hiraditya, bixia, llvm-commits
Differential Revision: https://reviews.llvm.org/D48338
llvm-svn: 335197
This reverts r334428. It incorrectly marks some multiplications as nuw. Tim
Shen is working on a proper fix.
Original commit message:
[SCEV] Add nuw/nsw to mul ops in StrengthenNoWrapFlags where safe.
Summary:
Previously we would add them for adds, but not multiplies.
llvm-svn: 335016
Summary:
Sending for presubmit review out of an abundance of caution; it would be
bad to mess this up.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48238
llvm-svn: 334875
Summary:
Obviates the need for mask/clear/setFlags helpers.
There are some expressions here which can be simplified, but to keep
this easy to review, I have not simplified them in this patch.
No functional change.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48237
llvm-svn: 334874
Summary:
Specifically, we transform
zext(2^K * (trunc X to iN)) to iM ->
2^K * (zext(trunc X to i{N-K}) to iM)<nuw>
This is helpful because pulling the 2^K out of the zext allows further
optimizations.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits, timshen
Differential Revision: https://reviews.llvm.org/D48158
llvm-svn: 334737
Summary:
Previously we would do this simplification only if it did not introduce
any new truncs (excepting new truncs which replace other cast ops).
This change weakens this condition: If the number of truncs stays the
same, but we're able to transform trunc(X + Y) to X + trunc(Y), that's
still simpler, and it may open up additional transformations.
While we're here, also clean up some duplicated code.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48160
llvm-svn: 334736
Summary:
Previously we would add them for adds, but not multiplies.
Reviewers: sanjoy
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D48038
llvm-svn: 334428
An expression like
(zext i2 {(trunc i32 (1 + %B) to i2),+,1}<%while.body> to i32)
will become zero exactly when the nested value becomes zero in its type.
Strip injective operations from the input value in howFarToZero to make
the value simpler.
Differential Revision: https://reviews.llvm.org/D47951
llvm-svn: 334318
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
During simplification umax we trigger isKnownPredicate twice. As a first attempt it
tries the induction. To do that it tries to get post increment of SCEV.
Re-writing the SCEV may result in simplification of umax. If the SCEV contains a lot
of umax operations this recursion becomes very slow.
The added test demonstrates the slow behavior.
To resolve this we use only simple ways to check whether the predicate is known.
Reviewers: sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: lebedev.ri, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46046
llvm-svn: 331949
This patch was temporarily reverted because it has exposed bug 37229 on
PowerPC platform. The bug is unrelated to the patch and was just a general
bug in the optimization done for PowerPC platform only. The bug was fixed
by the patch rL331410.
This patch returns the disabled commit since the bug was fixed.
llvm-svn: 331427
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
The invocation of getExact in ScalarEvolution::getBackedgeTakenInfo is used
only for getting statistic and for assert.
Even if statistics is disabled, the code related to it will be eliminated
the invocation to getExact itself will not be eliminated
because it may have side-effects like creation of new SCEVs.
So do invocation only when we collect statistics or executes asserts.
Reviewers: mkazantsev, sanjoy, javed.absar
Reviewed By: javed.absar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46178
llvm-svn: 331099
Add new umin creation method which accepts a list of operands.
SCEV does not represents umin which is required in getExact, so
it transforms umin to umax with not. As a result the transformation of
tree of max to max with several operands does not work.
We just use the new introduced method for creation umin from several operands.
Reviewers: sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46047
llvm-svn: 331015
This reverts commit 023c8be90980e0180766196cba86f81608b35d38.
This patch triggers miscompile of zlib on PowerPC platform. Most likely it is
caused by some pre-backend PPC-specific pass, but we don't clearly know the
reason yet. So we temporally revert this patch with intention to return it
once the problem is resolved. See bug 37229 for details.
llvm-svn: 330893
In the function `simplifyOneLoop` we optimistically assume that changes in the
inner loop only affect this very loop and have no impact on its parents. In fact,
after rL329047 has been merged, we can now calculate exit counts for outer
loops which may depend on inner loops. Thus, we need to invalidate all parents
when we do something to a loop.
There is an evidence of incorrect behavior of `simplifyOneLoop`: when we insert
`SE->verify()` check in the end of this funciton, it fails on a bunch of existing
test, in particular:
LLVM :: Transforms/LoopUnroll/peel-loop-not-forced.ll
LLVM :: Transforms/LoopUnroll/peel-loop-pgo.ll
LLVM :: Transforms/LoopUnroll/peel-loop.ll
LLVM :: Transforms/LoopUnroll/peel-loop2.ll
Note that previously we have fixed issues of this variety, see rL328483.
This patch makes this function invalidate the outermost loop properly.
Differential Revision: https://reviews.llvm.org/D45937
Reviewed By: chandlerc
llvm-svn: 330576
This patch teaches SCEV how to prove implications for SCEVUnknown nodes that are Phis.
If we need to prove `Pred` for `LHS, RHS`, and `LHS` is a Phi with possible incoming values
`L1, L2, ..., LN`, then if we prove `Pred` for `(L1, RHS), (L2, RHS), ..., (LN, RHS)` then we can also
prove it for `(LHS, RHS)`. If both `LHS` and `RHS` are Phis from the same block, it is sufficient
to prove the predicate for values that come from the same predecessor block.
The typical case that it handles is that we sometimes need to prove that `Phi(Len, Len - 1) >= 0`
given that `Len > 0`. The new logic was added to `isImpliedViaOperations` and only uses it and
non-recursive reasoning to prove the facts we need, so it should not hurt compile time a lot.
Differential Revision: https://reviews.llvm.org/D44001
Reviewed By: anna
llvm-svn: 329150
The patch changes the usage of dominate to properlyDominate
to satisfy the condition !(a < a) while using std::max.
It is actually NFC due to set data structure is used to keep
the Loops and no two identical loops can be in collection.
So in reality there is no difference between usage of
dominate and properlyDominate in this particular case.
However it might be changed so it is better to fix it.
llvm-svn: 329051
Current implementation of `computeExitLimit` has a big piece of code
the only purpose of which is to prove that after the execution of this
block the latch will be executed. What it currently checks is actually a
subset of situations where the exiting block dominates latch.
This patch replaces all these checks for simple particular cases with
domination check over loop's latch which is the only necessary condition
of taking the exiting block into consideration. This change allows to
calculate exact loop taken count for simple loops like
for (int i = 0; i < 100; i++) {
if (cond) {...} else {...}
if (i > 50) break;
. . .
}
Differential Revision: https://reviews.llvm.org/D44677
Reviewed By: efriedma
llvm-svn: 329047
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer D44363 for a list of all the required patches.
Reviewers: sanjoy, dexonsmith, hfinkel, RKSimon
Reviewed By: dexonsmith
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D44944
llvm-svn: 328925
Currently, `getExact` fails if it sees two exit counts in different blocks. There is
no solid reason to do so, given that we only calculate exact non-taken count
for exiting blocks that dominate latch. Using this fact, we can simply take min
out of all exits of all blocks to get the exact taken count.
This patch makes the calculation more optimistic with enforcing our assumption
with asserts. It allows us to calculate exact backedge taken count in trivial loops
like
for (int i = 0; i < 100; i++) {
if (i > 50) break;
. . .
}
Differential Revision: https://reviews.llvm.org/D44676
Reviewed By: fhahn
llvm-svn: 328611
This patch teaches `computeConstantDifference` handle calculation of constant
difference between `(X + C1)` and `(X + C2)` which is `(C2 - C1)`.
Differential Revision: https://reviews.llvm.org/D43759
Reviewed By: anna
llvm-svn: 328609
Summary:
Revert r325687 workaround for PR36032 since
a fix was committed in r326154.
Reviewers: sbaranga
Differential Revision: http://reviews.llvm.org/D44768
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 328257
This is re-land of https://reviews.llvm.org/rL327362 with a fix
and regression test.
The crash was due to it is possible that for found MDL loop,
LHS or RHS may contain an invariant unknown SCEV which
does not dominate the MDL. Please see regression
test for an example.
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44553
llvm-svn: 327822
Methods `computeExitLimitFromCondCached` and `computeExitLimitFromCondImpl` take
true and false branches as parameters and only use them for asserts and for identifying
whether true/false branch belongs to the loop (which can be done once earlier). This fact
complicates generalization of exit limit computation logic on guards because the guards
don't have blocks to which they go in case of failure explicitly.
The motivation of this patch is that currently this part of SCEV knows nothing about guards
and only works with explicit branches. As result, it fails to prove that a loop
for (i = 0; i < 100; i++)
guard(i < 10);
exits after 10th iteration, while in the equivalent example
for (i = 0; i < 100; i++)
if (i >= 10) break;
SCEV easily proves this fact. We are going to change it in near future, and this is why
we need to make these methods operate on more abstract level.
This patch refactors this code to get rid of these parameters as meaningless and prepare
ground for teaching these methods to work with guards as well as they work with explicit
branching instructions.
Differential Revision: https://reviews.llvm.org/D44419
llvm-svn: 327615
isAvailableAtLoopEntry duplicates logic of `properlyDominates` after checking invariance.
This patch replaces this logic with invocation of this method which is more profitable
because it supports caching.
Differential Revision: https://reviews.llvm.org/D43997
llvm-svn: 327373
It is a revert of rL327362 which causes build bot failures with assert like
Assertion `isAvailableAtLoopEntry(RHS, L) && "RHS is not available at Loop Entry"' failed.
llvm-svn: 327363
IsKnownPredicate is updated to implement the following algorithm
proposed by @sanjoy and @mkazantsev :
isKnownPredicate(Pred, LHS, RHS) {
Collect set S all loops on which either LHS or RHS depend.
If S is non-empty
a. Let PD be the element of S which is dominated by all other elements of S
b. Let E(LHS) be value of LHS on entry of PD.
To get E(LHS), we should just take LHS and replace all AddRecs that
are attached to PD on with their entry values.
Define E(RHS) in the same way.
c. Let B(LHS) be value of L on backedge of PD.
To get B(LHS), we should just take LHS and replace all AddRecs that
are attached to PD on with their backedge values.
Define B(RHS) in the same way.
d. Note that E(LHS) and E(RHS) are automatically available on entry of PD,
so we can assert on that.
e. Return true if isLoopEntryGuardedByCond(Pred, E(LHS), E(RHS)) &&
isLoopBackedgeGuardedByCond(Pred, B(LHS), B(RHS))
Return true if Pred, L, R is known from ranges, splitting etc.
}
This is follow-up for https://reviews.llvm.org/D42417.
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: sanjoy, mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43507
llvm-svn: 327362
The range of SCEVUnknown Phi which merges values `X1, X2, ..., XN`
can be evaluated as `U(Range(X1), Range(X2), ..., Range(XN))`.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D43810
llvm-svn: 326418
Set default value for IgnoreOtherLoops of SCEVInitRewriter::rewrite to true
to be consistent with SCEVPostIncRewriter which does not have this parameter
but behaves as it would be true.
This is follow up for rL326067.
llvm-svn: 326174
Mikhail Goncharov