Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
This patch extends DIModule Debug metadata in LLVM to support
Fortran modules. DIModule is extended to contain File and Line
fields, these fields will be used by Flang FE to create debug
information necessary for representing Fortran modules at IR level.
Furthermore DW_TAG_module is also extended to contain these fields.
If these fields are missing, debuggers like GDB won't be able to
show Fortran modules information correctly.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79484
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
Add llvm.call.preallocated.{setup,arg} instrinsics.
Add "preallocated" operand bundle which takes a token produced by llvm.call.preallocated.setup.
Add "preallocated" parameter attribute, which is like byval but without the copy.
Verifier changes for these IR constructs.
See https://github.com/rnk/llvm-project/blob/call-setup-docs/llvm/docs/CallSetup.md
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74651
Recommits c51b45e32e
Reverted in b350c666ab due to some
(Google-internal) regressions I cannot reproduce... (so we'll see if
they reproduce this time around)
LLVM currently supports CSK_MD5 and CSK_SHA1 source file checksums in
debug info. This change adds support for CSK_SHA256 checksums.
The SHA256 checksums are supported by the CodeView debug format.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D75785
In order for dsymutil to collect .apinotes files (which capture
attributes such as nullability, Swift import names, and availability),
I want to propose adding an apinotes: field to DIModule that gets
translated into a DW_AT_LLVM_apinotes (path) nested inside
DW_TAG_module. This will be primarily used by LLDB to indirectly
extract the Swift names of Clang declarations that were deserialized
from DWARF.
<rdar://problem/59514626>
Differential Revision: https://reviews.llvm.org/D75585
in C++ templates."
This was reverted in 802b22b5c8 due to
missing .bc file and a chromium bot failure.
https://bugs.chromium.org/p/chromium/issues/detail?id=1057559#c1
This revision address both of them.
Summary:
This patch adds support for debuginfo generation for defaulted
parameters in clang and also extends corresponding DebugMetadata/IR to support this feature.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
The Bitcode/DITemplateParameter-5.0.ll test is failing:
FAIL: LLVM :: Bitcode/DITemplateParameter-5.0.ll (5894 of 36324)
******************** TEST 'LLVM :: Bitcode/DITemplateParameter-5.0.ll' FAILED ********************
Script:
--
: 'RUN: at line 1'; /usr/local/google/home/thakis/src/llvm-project/out/gn/bin/llvm-dis -o - /usr/local/google/home/thakis/src/llvm-project/llvm/test/Bitcode/DITemplateParameter-5.0.ll.bc | /usr/local/google/home/thakis/src/llvm-project/out/gn/bin/FileCheck /usr/local/google/home/thakis/src/llvm-project/llvm/test/Bitcode/DITemplateParameter-5.0.ll
--
Exit Code: 2
Command Output (stderr):
--
It looks like the Bitcode/DITemplateParameter-5.0.ll.bc file was never checked in.
This reverts commit c2b437d53d.
in C++ templates.
Summary:
This patch adds support for debuginfo generation for defaulted
parameters in clang and also extends corresponding DebugMetadata/IR to support this feature.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Summary: masked_load and masked_store instructions require the alignment to be specified and a power of two. It seems to me that this requirement applies to masked_gather and masked_scatter as well.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73179
Summary:
Second patch in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
Summarize vcall_visibility metadata in ThinLTO global variable summary.
Depends on D71907.
Reviewers: pcc, evgeny777, steven_wu
Subscribers: mehdi_amini, Prazek, inglorion, hiraditya, dexonsmith, arphaman, ostannard, llvm-commits, cfe-commits, davidxl
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71911
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
This patch imports constant variables even when they can't be internalized
(which results in promotion). This offers some extra constant folding
opportunities.
Differential revision: https://reviews.llvm.org/D70404
Attribute::getAsString doesn't have enough information to print anonymous
Module-level types correctly, so they come back as "%type 0xabcd". This results
in broken IR when printing as text.
Instead, print type-attributes (currently just byval) using the TypePrinting
infrastructure available in AsmWriter. This only applies to function argument
attributes.
Seeing some curious CFI failures internally - which makes little sense
to me, as I don't think anyone is using this flag (even us,
internally)... so sounds like a bug in my code somewhere (possibly a
latent one that propagating this flag exposed, not sure). Reverting
while I investigate.
This reverts commit c51b45e32e.
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Summary: A user can force a function to be inlined by specifying the always_inline attribute. Currently, thinlto implementation is not aware of always_inline functions and does not guarantee import of such functions, which in turn can prevent inlining of such functions.
Patch by Bharathi Seshadri <bseshadr@cisco.com>
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70014
Summary: This is a fix to revision D68839 and rL375023. This patch substitutes POSIX option "-b" for the non-portable GNU option "--strip-trailing-cr".
Reviewers: daltenty, hubert.reinterpretcast
Reviewed By: daltenty
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69342
Summary:
The guard for printing function flags in the summary was not checking
the NoInline flag.
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68948
llvm-svn: 374802
This improves readability of Windows path string literals in LLVM IR.
The LLVM assembler has supported \\ in IR strings for a long time, but
the lexer doesn't tolerate escaped quotes, so they have to be printed as
\22 for now.
llvm-svn: 374415
This implements the DWARF 5 feature described in:
http://dwarfstd.org/ShowIssue.php?issue=141212.1
To support recognizing anonymous structs:
struct A {
struct { // Anonymous struct
int y;
};
} a;
This patch adds a new (DI)flag to LLVM metadata:
ExportSymbols
Differential Revision: https://reviews.llvm.org/D66352
llvm-svn: 369781
For consistency with normal instructions and clarity when reading IR,
it's best to print the %0, %1, ... names of function arguments in
definitions.
Also modifies the parser to accept IR in that form for obvious reasons.
llvm-svn: 367755
It's possible that some function can load and store the same
variable using the same constant expression:
store %Derived* @foo, %Derived** bitcast (%Base** @bar to %Derived**)
%42 = load %Derived*, %Derived** bitcast (%Base** @bar to %Derived**)
The bitcast expression was mistakenly cached while processing loads,
and never examined later when processing store. This caused @bar to
be mistakenly treated as read-only variable. See load-store-caching.ll.
llvm-svn: 365188
This reverts r365040 (git commit 5cacb91475)
Speculatively reverting, since this appears to have broken check-lld on
Linux. Partial analysis in https://crbug.com/981168.
llvm-svn: 365097
Ties Stuij