- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
Cleaned up the objective C name parsing code to use a class.
Now breakpoints that are set by name that are objective C methods without the leading '+' or '-' will resolve. We do this by expanding all the objective C names for a given string. For example:
(lldb) b [MyString cStringUsingEncoding:]
Will set a breakpoint with multiple possible names:
-[MyString cStringUsingEncoding:]
+[MyString cStringUsingEncoding:]
Also if you have a category, it will strip the category and set a breakpoint in all variants:
(lldb) [MyString(my_category) cStringUsingEncoding:]
Will resolve to the following names:
-[MyString(my_category) cStringUsingEncoding:]
+[MyString(my_category) cStringUsingEncoding:]
-[MyString cStringUsingEncoding:]
+[MyString cStringUsingEncoding:]
Likewise when we have:
(lldb) b -[MyString(my_category) cStringUsingEncoding:]
It will resolve to two names:
-[MyString(my_category) cStringUsingEncoding:]
-[MyString cStringUsingEncoding:]
llvm-svn: 173858
Add the ability to give breakpoints a "kind" string, and have the StopInfoBreakpoint
print that in the brief description if set. Also print the kind - if set - in the breakpoint
listing.
Give kinds to a bunch of the internal breakpoints.
We were deleting the Mac OS X dynamic loader breakpoint as though the id we had stored away was
a breakpoint site ID, but in fact it was a breakpoint id, so we never actually deleted it. Fixed that.
llvm-svn: 173555
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
Setting breakpoints using "breakpoint set --selector <SEL>" previously didn't when there was no dSYM file.
Also fixed issues in the test suite that arose after fixing the bug.
Also fixed the log channels to properly ref count the log streams using weak pointers to the streams. This fixes a test suite problem that would happen when you specified a full path to the compiler with the "--compiler" option.
llvm-svn: 171816
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
it to print the old and new values.
Temporarily disable the "out of scope" checking since it didn't work correctly, and was
not what people generally expected watchpoints to be doing.
llvm-svn: 166472
enabled after we'd found a few bugs that were caused by shadowed
local variables; the most important issue this turned up was
a common mistake of trying to obtain a mutex lock for the scope
of a code block by doing
Mutex::Locker(m_map_mutex);
This doesn't assign the lock object to a local variable; it is
a temporary that has its dtor called immediately. Instead,
Mutex::Locker locker(m_map_mutex);
does what is intended. For some reason -Wshadow happened to
highlight these as shadowed variables.
I also fixed a few obivous and easy shadowed variable issues
across the code base but there are a couple dozen more that
should be fixed when someone has a free minute.
<rdar://problem/12437585>
llvm-svn: 165269
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
Previously we put a WatchpointSentry object within StopInfo.cpp to disable-and-then-enable the watchpoint itself
while we are performing the actions associated with the triggered watchpoint, which can cause the user-initiated
watchpoint disabling action to be negated.
Add a test case to verify that a watchpoint can be disabled during the callbacks.
llvm-svn: 162483
Watchpoint conditions were hitting watchpoint, smashing LLDB's stack.
Make sure watchpoint is properly disabled and subsequently enabled while performing watchpoint actions.
llvm-svn: 162322
do not take the sanpshot and forget about the stop info. It is possible that the variable expression has gone
out of scope, we'll revise the hit count due to the false alarms.
llvm-svn: 161892
Record the snapshot of our watched value when the watchpoint is set or hit.
And report the old/new values when watchpoint is triggered. Add some test scenarios.
llvm-svn: 161785
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)
<rdar://problem/11552372>
llvm-svn: 157668
"break set" commands to set this per breakpoint. Also, some CreateBreakpoint API's in the lldb_private
namespace had "internal" first and "skip_prologue" second. "internal should always be last. Fixed that.
rdar://problem/11484729
llvm-svn: 157225
path on rerunning, evict the old module from the target module list, inform the breakpoints
about this so they can do something intelligent as well.
rdar://problem/11273043
llvm-svn: 157008
No one was using it and Locker(pthread_mutex_t *) immediately asserts for
pthread_mutex_t's that don't come from a Mutex anyway. Rather than try to make
that work, we should maintain the Mutex abstraction and not pass around the
platform implementation...
Make Mutex::Locker::Lock take a Mutex & or a Mutex *, and remove the constructor
taking a pthread_mutex_t *. You no longer need to call Mutex::GetMutex to pass
your mutex to a Locker (you can't in fact, since I made it private.)
llvm-svn: 156221
since we now run the condition in the StopInfoBreakpoint's PerformAction, and don't need
to refer it to another "continue". Actually, we haven't needed to do this for a year or
so, I just hadn't gotten around to deleting the dead wood.
llvm-svn: 155967
Fixed an issue where we get NULL compile units back from the symbol vendor. We need symbol vendors to be able to quickly give an estimate of the compile units that they have without having to fully vette them first, so anyone getting compile units from a module should be able to deal with a NULL compile unit being returned for a given index.
llvm-svn: 155398
Cleaned up the Mutex::Locker and the ReadWriteLock classes a bit.
Also cleaned up the GDBRemoteCommunication class to not have so many packet functions. Used the "NoLock" versions of send/receive packet functions when possible for a bit of performance.
llvm-svn: 154458
This fix really needed to happen as a previous fix I had submitted for
calculating symbol sizes made many symbols appear to have zero size since
the function that was calculating the symbol size was calling another function
that would cause the calculation to happen again. This resulted in some symbols
having zero size when they shouldn't. This could then cause infinite stack
traces and many other side affects.
llvm-svn: 152244
I started work on being able to add symbol files after a debug session
had started with a new "target symfile add" command and quickly ran into
problems with stale Address objects in breakpoint locations that had
lldb_private::Section pointers into modules that had been removed or
replaced. This also let to grabbing stale modules from those sections.
So I needed to thread harded the Address, Section and related objects.
To do this I modified the ModuleChild class to now require a ModuleSP
on initialization so that a weak reference can created. I also changed
all places that were handing out "Section *" to have them hand out SectionSP.
All ObjectFile, SymbolFile and SymbolVendors were inheriting from ModuleChild
so all of the find plug-in, static creation function and constructors now
require ModuleSP references instead of Module *.
Address objects now have weak references to their sections which can
safely go stale when a module gets destructed.
This checkin doesn't complete the "target symfile add" command, but it
does get us a lot clioser to being able to do such things without a high
risk of crashing or memory corruption.
llvm-svn: 151336
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.
Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.
llvm-svn: 151009
indicate whether inline functions are desired.
This allows the expression parser, for instance,
to filter out inlined functions when looking for
functions it can call.
llvm-svn: 150279
Jim Ingham