Summary:
I ran llvm-exegesis on SKX, SKL, BDW, HSW, SNB.
Atom is from Agner and SLM is a guess.
I've left AMD processors alone.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48079
llvm-svn: 335097
Summary:
This fixes most of the scheduling info for SKX vector operations.
I had to split a lot of the YMM/ZMM classes into separate classes for YMM and ZMM.
The before/after llvm-exegesis analysis are in the phabricator diff.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47721
llvm-svn: 334407
Same fix as rL334110: I noticed while working on zero-idiom + dependency-breaking support (PR36671) that most of our binary instruction schedule tests were reusing the same src registers, which would cause the tests to fail once we enable scalar zero-idiom support on btver2.
llvm-svn: 334302
This is a fix for the problem arising in D47374 (PR37678):
https://bugs.llvm.org/show_bug.cgi?id=37678
We may not have throughput info because it's not specified in the model
or it's not available with variant scheduling, so assume that those
instructions can execute/complete at max-issue-width.
Differential Revision: https://reviews.llvm.org/D47723
llvm-svn: 334055
This fixes a couple of BtVer2 missing instructions that weren't been handled in the override.
NOTE: There are still a lot of overrides that still need cleaning up!
llvm-svn: 331770
I've created the necessary classes but there are still a lot of overrides that need cleaning up.
NOTE: The Znver1 model was missing some div/idiv variants in the instregex patterns and wasn't setting the resource cycles at all in the overrides.
llvm-svn: 331767
The XCHG16rr/XCHG32rr/XCHG64rr instructions should be 3 uops just like XCHG8rr. I believe they're just implemented as 3 move uops with a temporary register.
XADD is probably 2 moves and an add also using a temporary register.
Change the latency for both from 2 cycles to 3 cycles. Only 2 of the uops are serialized in their execution, the move into the temporary and the move out of the temporary. The move from one GPR to the other should be able to go in parallel with this if there are ALU resources available.
llvm-svn: 330349
This removes a bunch of unnecessary InstRW overrides. It also cleans up the missing information from the Sandy Bridge model. Other fixes to other models.
llvm-svn: 330308
Atom is the only x86 target that still uses schedule itineraries, if we can remove this then we can begin the work on removing x86 itineraries. I've also found that it will help with PR36550.
I've focussed on matching the existing model as closely as possible (relying on the schedule tests), PR36895 indicated a lot of these were incorrect but we can just as easily fix these after this patch as before. Hopefully we can get llvm-exegesis to help here,
There are a few instructions that rely on itinerary scheduling (mainly push/pop/return) of multiple resource stages, but I don't think any of these are show stoppers.
There are also a few codegen changes that seem related to the post-ra scheduler acting a little differently, I haven't tracked these down but they don't seem critical.
NOTE: I don't have access to any Atom hardware, so this hasn't been tested in the wild.
Differential Revision: https://reviews.llvm.org/D45486
llvm-svn: 329837
Summary:
Cmov and setcc previously used WriteALU, but on Intel processors at least they are more restricted than basic ALU ops.
This patch adds new SchedWrites for them and removes the InstRWs. I had to leave some InstRWs for CMOVA/CMOVBE and SETA/SETBE because those have an extra uop relative to the other condition codes on Intel CPUs.
The test changes are due to fixing a missing ZnAGU dependency on the memory form of setcc.
Reviewers: RKSimon, andreadb, GGanesh
Reviewed By: RKSimon
Subscribers: GGanesh, llvm-commits
Differential Revision: https://reviews.llvm.org/D45380
llvm-svn: 329539
Summary:
This patch removes InstRW overrides for basic arithmetic/logic instructions. To do this I've added the store address port to RMW. And used a WriteSequence to make the latency additive. It does not cover ADC/SBB because they have different latency.
Apparently we were inconsistent about whether the store has latency or not thus the test changes.
I've also left out Sandy Bridge because the load latency there is currently 4 cycles and should be 5.
Reviewers: RKSimon, andreadb
Reviewed By: andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45351
llvm-svn: 329416
As mentioned on D44647, this patch increases the default memory latency to +5cy , which more closely matches what most custom cases are doing for reg-mem instructions.
I've bumped LoadLatency, ReadAfterLd and WriteLoad values to 5cy to be consistent.
As Sandy Bridge is currently our default generic model, this affects a lot of scheduling tests...
Differential Revision: https://reviews.llvm.org/D44654
llvm-svn: 329388
This is the 32-bit mode version of LEAVE64. It should be at least somewhat similar to LEAVE64.
The Sandy Bridge version was missing a load port use.
llvm-svn: 329347
We were forcing the latency of these instructions to 5 cycles, but every other scheduler model had them as 1 cycle. I'm sure I didn't get everything, but this gets a big portion.
llvm-svn: 329339
It's failing on the bots and I'm not sure why.
This reverts:
[X86] Synchronize the SchedRW on some EVEX instructions with their VEX equivalents.
[X86] Use WriteFShuffle256 for VEXTRACTF128 to be consistent with VEXTRACTI128 which uses WriteShuffle256.
[X86] Remove some InstRWs for plain store instructions on Sandy Bridge.
[X86] Auto-generate complete checks. NFC
llvm-svn: 329256
Give the bit count instructions their own scheduler classes instead of forcing them into existing classes.
These were mostly overridden anyway, but I had to add in costs from Agner for silvermont and znver1 and the Fam16h SoG for btver2 (Jaguar).
Differential Revision: https://reviews.llvm.org/D44879
llvm-svn: 328566
They were incorrectly marked as RMW operations. Some of the CMP instrucions worked, but the ones that use a similar encoding as RMW form of ADD ended up marked as RMW.
TEST used the same tablegen class as some of the CMPs.
llvm-svn: 327947
PR35590 was already filed for this information being wrong. It's probably better to default to WriteSystem behavior instead of using something completely wrong.
llvm-svn: 327882
JRCXZ was already present, but not the others.
We never codegen this instruction so this doesn't affect much just trying to get them all into a single generated scheduler class in the output.
llvm-svn: 327881
The regex was looking for JECXZ_32 or JECXZ_64, but their is just one instruction called JECXZ. They used to exist as separate instructions, but were merged over 3 years ago.
llvm-svn: 327880
Sometimes we used the same itinerary for MEM and REG forms, but that seems inconsistent with our usual usage.
We also used the MUL8 itinerary for MULX32/64 which was also weird.
The test changes are because we were using IIC_IMUL32_RR and IIC_IMUL64_RR instead of IIC_IMUL32_REG/IIC_IMUL64_REG for the 32 and 64 bit multiplies that produce double width result.
llvm-svn: 327866
1. Given that we already have a classification bucket with 'nop' in the name,
that's where 'nop' belongs. Right now, it's only used for prefix bytes and 'pause'.
2. Make the latency of this class '1' for Jaguar to tell the scheduler (and presumably
llvm-mca) how to model the resource requirements better even though a nop has no
dependencies.
Differential Revision: https://reviews.llvm.org/D44608
llvm-svn: 327853
Also move ADC8i8 and SBB8i8 in the Sandy Bridge model to the same class as ADC8ri and SBB8ri. That seems more accurate since its the 8i8 is just the register forced to AL instead of coming from modrm.
llvm-svn: 327820
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
The regular expressions and the imul names caused some instructions to be matched by multiple regexs creating unpredictable results.
This changes them all to use explicit instrs instead.
While doing this I also found that some instructions in Skylake were missing load latency so I fixed that too.
llvm-svn: 323406
Clement Courbet