Prior to my patch of using the LLVM line table parsing code,
SymbolFileDWARF::ParseSupportFiles would only parse the line table
prologues to get the file list for any files that could be in the line
table.
With the old behavior, if we found the file that someone is setting the
breakpoint in in the support files list, we would get a valid index. If
we didn't, we would not look any further. So someone sets a breakpoint
one "MyFile.cpp:12" and if we find "MyFile.cpp" in the support file list
for the compile unit, then and only then would we get the entire line
table for that compile unit.
With the current behavior, no matter what, we always fully parse the
line table for all compile units any time any file and line breakpoint
is set. This creates a serious problem when debugging a large DWARF in
.o file project.
This patch re-instates the old behavior. Unfortunately it means we might
end up parsing to prologue twice, but I don't think that outweighs the
cost of trying to cache/reuse it.
Differential revision: https://reviews.llvm.org/D81589
Summary:
When we get an error back from IRForTarget we directly print that error to the
debugger output stream instead of putting it in the result object. The result
object only gets a vague "The expression could not be prepared to run in the
target" error message that doesn't actually tell the user what went wrong.
This patch just puts the IRForTarget errors into the status object that is
returned to the caller instead of directly printing it to the debugger. Also
updates one test that now can actually check for the error message it is
supposed to check for (instead of the default error which is all we had before).
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81654
Summary:
`PlatformAppleSimulator::GetCoreSimulatorPath` currently checks if
`m_core_simulator_framework_path` wasn't set yet and then tries to calculate its
actual value. However, if `GetXcodeDeveloperDirectory` returns an invalid
FileSpec, `m_core_simulator_framework_path` is never assigned a value which
causes that the `return m_core_simulator_framework_path.getValue();` at the end
of the function will trigger an assert.
This patch just assigns an invalid FileSpec to `m_core_simulator_framework_path`
which seems what the calling code in `PlatformAppleSimulator::LoadCoreSimulator`
expects as an error value.
I assume this can be reproduces on machines that don't have an Xcode
installation, but this patch is mostly based on this backtrace I received from
someone else that tried to run the test suite:
```
Assertion failed: (hasVal), function getValue, file llvm/include/llvm/ADT/Optional.h, line 73.
[...]
3 libsystem_c.dylib 0x00007fff682a1ac6 __assert_rtn + 314
4 liblldb.11.0.0git.dylib 0x000000010b835931 PlatformAppleSimulator::GetCoreSimulatorPath() (.cold.1) + 33
5 liblldb.11.0.0git.dylib 0x0000000107e92f11 PlatformAppleSimulator::GetCoreSimulatorPath() + 369
6 liblldb.11.0.0git.dylib 0x0000000107e9383e void std::__1::__call_once_proxy<std::__1::tuple<PlatformAppleSimulator::LoadCoreSimulator()::$_1&&> >(void*) + 30
7 libc++.1.dylib 0x00007fff654d5bea std::__1::__call_once(unsigned long volatile&, void*, void (*)(void*)) + 139
8 liblldb.11.0.0git.dylib 0x0000000107e92019 PlatformAppleSimulator::LaunchProcess(lldb_private::ProcessLaunchInfo&) + 89
9 liblldb.11.0.0git.dylib 0x0000000107e92be5 PlatformAppleSimulator::DebugProcess(lldb_private::ProcessLaunchInfo&, lldb_private::Debugger&, lldb_private::Target*, lldb_private::Status&) + 101
10 liblldb.11.0.0git.dylib 0x0000000107cb044d lldb_private::Target::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::Stream*) + 669
11 liblldb.11.0.0git.dylib 0x000000010792c9c5 lldb::SBTarget::Launch(lldb::SBLaunchInfo&, lldb::SBError&) + 1109
12 liblldb.11.0.0git.dylib 0x0000000107a92acd _wrap_SBTarget_Launch(_object*, _object*) + 477
13 org.python.python 0x000000010681076f PyCFunction_Call + 321
14 org.python.python 0x000000010689ee12 _PyEval_EvalFrameDefault + 7738
```
Reviewers: JDevlieghere, jasonmolenda
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D80997
Color the error: and warning: part of the CommandReturnObject output,
similar to how an error is printed from the driver when colors are
enabled.
Differential revision: https://reviews.llvm.org/D81058
D80519 <https://reviews.llvm.org/D80519>
added support for `DW_TAG_GNU_call_site` but
Bug 45886 <https://bugs.llvm.org/show_bug.cgi?id=45886>
found one case did not work.
There is:
0x000000b1: DW_TAG_GNU_call_site
DW_AT_low_pc (0x000000000040111e)
DW_AT_abstract_origin (0x000000cc "a")
...
0x000000cc: DW_TAG_subprogram
DW_AT_name ("a")
DW_AT_prototyped (true)
DW_AT_low_pc (0x0000000000401109)
^^^^^^^^^^^^ - here it did overwrite the 'low_pc' variable containing value 0x40111e we wanted
DW_AT_high_pc (0x0000000000401114)
DW_AT_frame_base (DW_OP_call_frame_cfa)
DW_AT_GNU_all_call_sites (true)
DW_TAG_GNU_call_site attributes order as produced by GCC:
0x000000b1: DW_TAG_GNU_call_site
DW_AT_low_pc (0x000000000040111e)
DW_AT_abstract_origin (0x000000cc "a")
clang produces the attributes in opposite order:
0x00000064: DW_TAG_GNU_call_site
DW_AT_abstract_origin (0x0000002a "a")
DW_AT_low_pc (0x0000000000401146)
Differential Revision: https://reviews.llvm.org/D81334
Summary:
The way that the support for the GNU dialect of tail call frames was
implemented in D80519 meant that the were reporting very bogus PC values
which pointed into the middle of an instruction: the -1 trick is
necessary for the address to resolve to the right function, but we
should still be reporting a more realistic PC value -- I say "realistic"
and not "real", because it's very debatable what should be the correct
PC value for frames like this.
This patch achieves that my moving the -1 from SymbolFileDWARF into the
stack frame computation code. The idea is that SymbolFileDWARF will
merely report whether it has provided an address of the instruction
after the tail call, or the address of the call instruction itself. The
StackFrameList machinery uses this information to set the "behaves like
frame zero" property of the artificial frames (the main thing this flag
does is it controls the -1 subtraction when looking up the function
address).
This required a moderate refactor of the CallEdge class, because it was
implicitly assuming that edges pointing after the call were real calls
and those pointing the the call insn were tail calls. The class now
carries this information explicitly -- it carries three mostly
independent pieces of information:
- an address of interest in the caller
- a bit saying whether this address points to the call insn or after it
- whether this is a tail call
Reviewers: vsk, dblaikie
Subscribers: aprantl, mgrang, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81010
SBTarget::AddModule currently handles the UUID parameter in a very
weird way: UUIDs with more than 16 bytes are trimmed to 16 bytes. On
the other hand, shorter-than-16-bytes UUIDs are completely ignored. In
this patch, we change the parsing code to handle UUIDs of arbitrary
size.
To support arbitrary size UUIDs in SBTarget::AddModule, this patch
changes UUID::SetFromStringRef to parse UUIDs of arbitrary length. We
subtly change the semantics of SetFromStringRef - SetFromStringRef now
only succeeds if the entire input is consumed to prevent some
prefix-parsing confusion. This is up for discussion, but I believe
this is more consistent - we always return false for invalid UUIDs
rather than sometimes truncating to a valid prefix. Also, all the
call-sites except the API and interpreter seem to expect to consume
the entire input.
This also adds tests for adding existing modules 4-, 16-, and 20-byte
build-ids. Finally, we took the liberty of testing the minidump
scenario we care about - removing placeholder module from minidump and
replacing it with the real module.
Reviewed By: labath, friss
Differential Revision: https://reviews.llvm.org/D80755
trivial.
We previously took a shortcut by assuming that if a subobject had a
trivial copy assignment operator (with a few side-conditions), we would
always invoke it, and could avoid going through overload resolution.
That turns out to not be correct in the presenve of ref-qualifiers (and
also won't be the case for copy-assignments with requires-clauses
either). Use the same logic for lazy declaration of copy-assignments
that we use for all other special member functions.
Previously committed as c57f8a3a20. This
now also includes an extension of LLDB's workaround for handling special
members without the help of Sema to cover copy assignments.
Summary:
The code changes are very straight-forward -- just handle both DW_AT_GNU
and DW_AT_call versions of all tags and attributes. There is just one
small gotcha: in the GNU version, DW_AT_low_pc was used both for the
"return pc" and the "call pc" values, depending on whether the tag was
describing a tail call, while the official scheme uses different
attributes for the two things.
Reviewers: vsk, dblaikie
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80519
This fixes an unhandled signed integer overflow in AddWithCarry() by
using the llvm::checkedAdd() function. Thats to Vedant Kumar for the
suggestion!
<rdar://problem/60926115>
Differential Revision: https://reviews.llvm.org/D80955
Summary:
ClangExpressionSourceCode has different ways to wrap the user expression based on
which context the expression is executed in. For example, if we're in a C++ member
function we put the expression inside a fake member function of a fake class to make the
evaluation possible. Similar things are done for Objective-C instance/static methods.
There is also a default wrapping where we put the expression in a normal function
just to make it possible to execute it.
The way we currently define which kind of wrapping the expression needs is based on
the `wrapping_language` we keep passing to the ClangExpressionSourceCode
instance. We repurposed the language type enum for that variable to distinguish the
cases above with the following mapping:
* language = C_plus_plus -> member function wrapping
* language = ObjC -> instance/static method wrapping (`is_static` distinguished between those two).
* language = C -> normal function wrapping
* all other cases like C_plus_plus11, Haskell etc. make our class a no-op that does mostly nothing.
That mapping is currently not documented and just confusing as the `language`
is unrelated to the expression language (and in the ClangUserExpression we even pretend
that it *is* the actual language, but luckily never used it for anything). Some of the code
in ClangExpressionSourceCode is also obviously thinking that this is the actual language of
the expression as it checks for non-existent cases such as `ObjC_plus_plus` which is
not part of the mapping.
This patch makes a new enum to describe the four cases above (with instance/static Objective-C
methods now being their own case). It also make that enum just a member of
ClangExpressionSourceCode instead of having to pass the same value to the class repeatedly.
This gets also rid of all the switch-case-checks for 'unknown' language such as C_plus_plus11 as this
is no longer necessary.
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D80793
Summary:
On Android, this method gets called twice: first when establishing
a host-server connection, then when attaching to a process id.
Each call takes several seconds to finish (especially slower on Windows)
and eliminating the call for the typical case improves latency significantly.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D79586
Summary:
It turns out that the order in which we provide completions for expressions is
nondeterministic. This leads to confusing user experience and also breaks the
reproducer tests (as two LLDB tests can go out of sync due to the
non-determinism in the completion lists)
The reason for the non-determinism is that the CompletionConsumer informs us
about decls in the order in which it finds declarations in the lookup store of
the DeclContexts it visits (mainly this snippet in SemaLookup.cpp):
``` lang=c++
// Enumerate all of the results in this context.
for (DeclContextLookupResult R :
Load ? Ctx->lookups()
: Ctx->noload_lookups(/*PreserveInternalState=*/false)) {
[...]
```
This storage of the lookup is sorted by pointer values (see the hash of
`DeclarationName`) and can therefore be non-deterministic. The LLDB code
completion consumer that receives these calls originally expected that the order
of declarations is defined by Clang, but it seems the API expects the client to
provide an order to the completions.
This patch fixes the issue as follows:
* We sort the completions we get from Clang alphabetically and also by the
priority value we get from Clang (with priority value sorting having precedence
over the alphabetical sorting)
* We make all the functions/variables that touch a completion before the sorting
const-qualified. The idea is that this should prevent that we never have
observable side-effect from touching these declarations in a non-deterministic
order (e.g., we don't try to complete the type by accident).
This way we behave like the other parts of Clang which also sort the results by
some deterministic value (usually the name or something computed from a name,
e.g., edit distance to a given string).
We most likely also need to fix the Clang code to make the loop I listed above
deterministic to prevent these issues in the future (tracked in rdar://63442513
). This wouldn't replace the functionality provided in this patch though as we
would still need the priority and overall alphabetical sorting.
Note: I had to increase the lldb-vscode completion limit to 100 as the tests
look for strings that aren't in the first 50 results anymore due to variable
names starting with letters like 'v' (which are now always shown much further
down in the list due to the alphabetical sorting).
Fixes rdar://63200995
Reviewers: JDevlieghere, clayborg
Reviewed By: JDevlieghere
Subscribers: mgrang, abidh
Differential Revision: https://reviews.llvm.org/D80292
Summary:
For ObjCInterfaceDecls, LLDB iterates over the `methods` of the interface in FindExternalVisibleDeclsByName
since commit ef423a3ba5 .
However, when LLDB calls `oid->methods()` in that function, Clang will pull in all declarations in the current
DeclContext from the current ExternalASTSource (which is again, `ClangExternalASTSourceCallbacks`). The
reason for that is that `methods()` is just a wrapper for `decls()` which is supposed to provide a list of *all*
(both currently loaded and external) decls in the DeclContext.
However, `ClangExternalASTSourceCallbacks::FindExternalLexicalDecls` doesn't implement support for ObjCInterfaceDecl,
so we don't actually add any declarations and just mark the ObjCInterfaceDecl as having no ExternalLexicalStorage.
As LLDB uses the ExternalLexicalStorage to see if it can complete a type with the ExternalASTSource, this causes
that LLDB thinks our class can't be completed any further by the ExternalASTSource
and will from on no longer make any CompleteType/FindExternalLexicalDecls calls to that decl. This essentially
renders those types unusable in the expression parser as they will always be considered incomplete.
This patch just changes the call to `methods` (which is just a `decls()` wrapper), to some ad-hoc `noload_methods`
call which is wrapping `noload_decls()`. `noload_decls()` won't trigger any calls to the ExternalASTSource, so
this prevents that ExternalLexicalStorage will be set to false.
The test for this is just adding a method to an ObjC interface. Before this patch, this unset the ExternalLexicalStorage
flag and put the interface into the state described above.
In a normal user session this situation was triggered by setting a breakpoint in a method of some ObjC class. This
caused LLDB to create the MethodDecl for that specific method and put it into the the ObjCInterfaceDecl.
Also `ObjCLanguageRuntime::LookupInCompleteClassCache` needs to be unable to resolve the type do
an actual definition when the breakpoint is set (I'm not sure how exactly this can happen, but we just
found no Type instance that had the `TypePayloadClang::IsCompleteObjCClass` flag set in its payload in
the situation where this happens. This however doesn't seem to be a regression as logic wasn't changed
from what I can see).
The module-ownership.mm test had to be changed as the only reason why the ObjC interface in that test had
it's ExternalLexicalStorage flag set to false was because of this unintended side effect. What actually happens
in the test is that ExternalLexicalStorage is first set to false in `DWARFASTParserClang::CompleteTypeFromDWARF`
when we try to complete the `SomeClass` interface, but is then the flag is set back to true once we add
the last ivar of `SomeClass` (see `SetMemberOwningModule` in `TypeSystemClang.cpp` which is called
when we add the ivar). I'll fix the code for that in a follow-up patch.
I think some of the code here needs some rethinking. LLDB and Clang shouldn't infer anything about the ExternalASTSource
and its ability to complete the current type form the `ExternalLexicalStorage` flag. We probably should
also actually provide any declarations when we get asked for the lexical decls of an ObjCInterfaceDecl. But both of those
changes are bigger (and most likely would cause us to eagerly complete more types), so those will be follow up patches
and this patch just brings us back to the state before commit ef423a3ba5 .
Fixes rdar://63584164
Reviewers: aprantl, friss, shafik
Reviewed By: aprantl, shafik
Subscribers: arphaman, abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D80556
The llvm DWARFExpression dump is nearly identical, but better -- for
example it does print a spurious space after zero-argument expressions.
Some parts of our code (variable locations) have been already switched
to llvm-based expression dumping. This switches the remainder: unwind
plans and some unit tests.
Summary:
This is an attempt to fix https://bugs.llvm.org/show_bug.cgi?id=45988,
where SBValue::GetNumChildren returns 2, but SBValue::GetChildAtIndex(1) returns
an invalid value sentinel.
The root cause of this seems to be that GetNumChildren can return the number of
children of a wrong value. In particular, for pointers GetNumChildren just
recursively calls itself on the pointee type, so it effectively walks chains of
pointers. This is different from the logic of GetChildAtIndex, which only
recurses if pointee.IsAggregateType() returns true (IsAggregateType is false for
pointers and references), so it never follows chain of pointers.
This patch aims to make GetNumChildren (more) consistent with GetChildAtIndex by
only recursively calling GetNumChildren for aggregate types.
Ideally, GetNumChildren and GetChildAtIndex would share the code that decides
which pointers/references are followed, but that is a bit more invasive change.
Reviewers: teemperor, jingham, clayborg
Reviewed By: teemperor, clayborg
Subscribers: clayborg, labath, shafik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80254
This reverts commit 5f88f39ab8. It broke these
three tests on the Window bot:
lldb-api :: commands/expression/completion/TestExprCompletion.py
lldb-api :: lang/cpp/scope/TestCppScope.py
lldb-api :: lang/cpp/standards/cpp11/TestCPP11Standard.py
Summary:
Currently we never enable C++14 in the expression evaluator. This enables it when the language of the program is C++14.
It seems C++17 and so on isn't yet in any of the language enums (and the DWARF standard it seems), so C++17 support will be a follow up patch.
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: aprantl
Differential Revision: https://reviews.llvm.org/D80308
Summary:
This changes allows to disable or use customized libxml2 for lldb.
1. Removes redundant include_directories. The one in LLDBConfig.cmake should be enough.
2. Link to ${LIBXML2_LIBRARIES} if xml2 is enabled.
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80257
Add reproducer support to PlatformRemoteGDBServer. The logic is
essentially the same as for ProcessGDBRemote. During capture we record
the GDB packets and during replay we connect to a replay server.
This fixes TestPlatformClient.py when run form a reproducer.
Differential Revision: https://reviews.llvm.org/D80224
This reverts commit b783f70a42. This
change had multiple issues which required post-commit fixups, and not
all issues are fixed yet. In particular, the LLDB build bot for ARM is
still broken. There is also an ongoing conversation in the original
phabricator review about whether there is undefined behavior in the
code.
Summary:
When adb client connects to adb server, or when lldb connects to
lldb server on Android device, IPv6 does not work (at least on
Windows it does not work).
For Android on Windows, each IPv6 failure (fallback-to-IPv4) wastes
2 seconds, and since this is called 5 times when attaching, LLDB
is wasting 10 seconds. This CL brings a big improvement to attach latency.
Reviewers: labath
Reviewed By: labath
Subscribers: aadsm, clayborg, mgrang, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79757
This addresses some post-commit review feedback from
https://reviews.llvm.org/D80150 by renaming "Mock.h" to something less
misleading, and keeping logic related to the ObjC plugin separate from
the generic DataFormatters library.
Summary:
Fixes UBSan-reported issues where the date value inside of an
uninitialized NSDate overflows the 64-bit epoch.
rdar://61774575
Reviewers: JDevlieghere, mib, teemperor
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80150
This patch improves data formatting for CFDictionaryRef and CFSetRef.
It uses the same data-formatter as NSCFDictionaries and NSCFSets introduced
previously but did require some adjustments in Core::ValueObject.
Since the "Ref" types are opaque pointers to the actual CF containers, if the
value object has a synthetic value, lldb will use the opaque pointer's pointee
type to create the new ValueObjectChild needed to dereference the ValueObject.
This allows the "Ref" types to behaves the same as CF containers when used with
the `frame variable` command, the SBAPI or in Xcode's variable inspector.
This patch also adds support for incomplete types in ValueObject.
rdar://53104287
Differential Revision: https://reviews.llvm.org/D79554
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
When the ClangModulesDeclVendor currently fails it just prints very basic and often incomplete diagnostics without any source locations:
```
(lldb) p @import Foundation
error: while importing modules:
'foo/bar.h' file not found
could not build module 'Darwin'
[...]
```
or even just
```
(lldb) p @import Foundation
error: while importing modules:
could not build module 'Darwin'
[...]
```
These diagnostics help neither the user nor us with figuring out what is the reason for the failure.
This patch wires up a full TextDiagnosticPrinter in the ClangModulesDeclVendor and makes
sure we always return the error stream to the user when we fail to compile our modules.
Fixes rdar://63216849
Reviewers: aprantl, jdoerfert
Reviewed By: aprantl
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D79947
Summary:
This is equivalent to previous patches (e.g. 07355c1c0) for the x86 ABIs.
One name fixup is needed -- lldb refers to the floating/vector registers by
their vector name (vN). Llvm does not use this name, so we map it to qN,
representing the register as a single 128 bit value (this choice is fairly
arbitrary -- any other name would also work fine as they all have the same
DWARF number).
Reviewers: JDevlieghere, jasonmolenda, omjavaid
Reviewed By: omjavaid
Subscribers: clayborg, danielkiss, aprantl, kristof.beyls, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75607
This setting was added last year, defaulting to false. There have been
no bug reports about the svr4 code path since then, and the using this
packet is definitely faster than walking the module list from lldb.
Set the default value of the setting to true, as that is a better
default. Users can still change it back if encountering problems, or we
can revert the change as well, in case of bigger issues.
I also add a note to the setting description that it is only effective
if lldb is built with xml support.
The near-identical implementations of this function for posix-y
platforms were merged in r293910. PlatformWindows was left out of this
merge because at the time we did not have a suitable base class to sink
the code into. That is no longer true, so this commit finishes the job
by moving the code into RemoteAwarePlatform::ResolveExecutable.
Summary:
The D programming language has 'char', 'wchar', and 'dchar' as base types,
which are defined as UTF-8, UTF-16, and UTF-32, respectively.
It also has type constructors (e.g. 'const' and 'immutable'),
that leads to D compilers emitting DW_TAG_base_type with DW_ATE_UTF
and name 'char', 'immutable(wchar)', 'const(char)', etc...
Before this patch, DW_ATE_UTF would only recognize types that
followed the C/C++ naming, and emit an error message for the rest, e.g.:
```
error: need to add support for DW_TAG_base_type 'immutable(char)'
encoded with DW_ATE = 0x10, bit_size = 8
```
The code was changed to check the byte size first,
then fall back to the old name-based check.
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79559
Summary:
We got a few crash reports where LLDB crashes while derefencing the `frames_value` shared_ptr in the AppleObjCRuntime::GetBacktraceThreadFromException. `GetChildMemberWithName` returns a nullptr when an error occurs, so this seems to be just a missing nullptr check.
This patch adds that nullptr check and the other ones in the similar code directly below.
Fixes rdar://62174039
Reviewers: jingham, kubamracek
Reviewed By: jingham
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D78798
This was reverted due to a python2-specific bug. Re-landing with a fix
for python2.
Summary:
One small step in my long running quest to improve python exception handling in
LLDB. Replace GetInteger() which just returns an int with As<long long> and
friends, which return Expected types that can track python exceptions
Reviewers: labath, jasonmolenda, JDevlieghere, vadimcn, omjavaid
Reviewed By: labath, omjavaid
Subscribers: omjavaid, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78462
All entry points into ProcessGDBRemote that connect to the debug server
should connect to the replay server instead during reproducer replay.
This patch adds the necessary logic for ConnectRemote, which is
accessible from the SB API. This fixes active replay for
TestRecognizeBreakpoint.py as described in D78588.
For Swift LLDB (but potentially also for module support in Clang-land)
we need a way to accumulate the path remappings produced by
Module::RegisterXcodeSDK(). In order to make this work for
SymbolFileDebugMaps, registering the search path remapping with both
modules is necessary.
Differential Revision: https://reviews.llvm.org/D79384
<rdar://problem/62750529>
When debugging a remote platform, the platform you get from
GetPlatformForArchitecture doesn't inherit from PlatformDarwin.
HostInfoMacOSX seems like the right place to have a global store of
local paths.
Differential Revision: https://reviews.llvm.org/D79364
When debugging from a SymbolMap the creation of CompileUnits for the
individual object files is so lazy that RegisterXcodeSDK() is not
invoked at all before the Swift TypeSystem wants to read it. This
patch fixes this by introducing an explicit
SymbolFile::ParseXcodeSDK() call that can be invoked deterministically
before the result is required.
<rdar://problem/62532151+62326862>
https://reviews.llvm.org/D79273
Summary:
Languages can have different ways of formatting special characters.
E.g. when debugging C++ code a string might look like "\b", but when
debugging Swift code the same string would look like "\u{8}".
To make this work, plugins override GetStringPrinterEscapingHelper.
However, because there's a large amount of subtly divergent work done in
each override, we end up with large amounts of duplicated code. And all
the memory smashers fixed in one copy of the logic (see D73860) don't
get fixed in the others.
IMO the GetStringPrinterEscapingHelper is overly general and hard to
use. I propose deleting it and replacing it with an EscapeStyle enum,
which can be set as needed by each plugin.
A fix for some swift-lldb memory smashers falls out fairly naturally
from this deletion (https://github.com/apple/llvm-project/pull/1046). As
the swift logic becomes really tiny, I propose moving it upstream as
part of this change. I've added unit tests to cover it.
rdar://61419673
Reviewers: JDevlieghere, davide
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77843
The dumping code is not used by anyone, and is a source of
inconsistencies with the llvm dwarf parser, as dumping is implemented at
a different level (DWARFDie) there.
Summary:
This was originally commented out as it broke the data-formatter-stl/libcxx/
tests. However this was fixed by commit ef423a3ba5
(Add Objective-C property accessors loaded from Clang module DWARF to lookup)
which sets the HasExternalVisibleStorage flag for the template specializations.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D79168
The cause of this crash is relatively simple -- we are using a
SymbolFileDWARFDwo to parse a (skeleton) dwarf unit. This cause the
CompileUnit to be created with the wrong ID, which later triggers an
assertion in SymbolFile::SetCompileUnitAtIndex. The fix is also simple
-- ensure we use the right symbol file for parsing.
However, a fairly elaborate setup is needed trigger this bug, because
ParseCompileUnit is normally called very early on (and with the right
symbol file object) during the process of accessing a compile unit.
The only way this can be triggered is if the DWARF unit is
"accidentally" pulled into scope during expression evaluation
This can happen if the "this" object used for the context of an
expression is in a namespace, and that namespace is also present in
other compile units
The included test recreates this setup.
Summary:
This patch adds support to access AArch64 FP SIMD core dump registers and adds a test case to verify registers.
This patches fixes a bug where doing "register read --all" causes lldb to crash.
Reviewers: labath
Reviewed By: labath
Subscribers: kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77793
Summary: This patch increases maximum register size to 256 bytes to accommodate AArch64 SVE registers maximum possible size of 256 bytes.
Reviewers: labath, jankratochvil, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77044
Nothing guarantees that the objects in the StringMap remains at the same
address when the StringMap grows. Therefore we shouldn't return a
reference into the StringMap but return a copy of the string instead.
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
This patch improves data formatting for CoreFoundation containers:
CFDictionary and CFSet.
These data formatters make the containers and their children appear in Xcode's
variables view (and on the command line) without having to expand the
data structure.
Previous implementation only supported showing the container's element count.
```
(lldb) frame var dict
(__NSCFDictionary *) dict = 0x00000001004062b0 2 key/value pairs
(lldb) frame var set
(__NSCFSet *) set = 0x0000000100406330 2 elements
```
Now the variable can be dereferenced to dispaly the container's children:
```
(lldb) frame var *dict
(__NSCFDictionary) *dict = {
[0] = {
key = 0x0000000100004050 @"123"
value = 0x0000000100004090 @"456"
}
[1] = {
key = 0x0000000100004030 @"abc"
value = 0x0000000100004070 @"def"
}
}
(lldb) frame var *set
(__NSCFSet) *set = {
[0] = 0x0000000100004050 @"123"
[1] = 0x0000000100004030 @"abc"
}
```
rdar://39882287
Differential Revision: https://reviews.llvm.org/D78396
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
this is dead and non-functional code that hasn't been touched (modulo
refactors) since it was checked in (as an "NFC, with no review and
tests) in 2016.
Anyone interested in adding darwin support to lldb-server can look this
up in git history.
Summary:
Sometimes a result variable of some expression can be presented as an elaborated
type. In this case the methods `IsTypedefType()` and `GetTypedefedType()` of
`SBType` didn't work. This patch fixes that.
I didn't find the test for these API methods, so I added a basic test for this
too.
Reviewers: aprantl, teemperor, labath, leonid.mashinskiy
Reviewed By: teemperor
Subscribers: labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78697
This patch fixes a bug when synthesizing an ObjC property from
-gmodules debug info. Because the method declaration that is injected
via the non-modular property implementation is not added to the
ObjCInterfaceDecl's lookup pointer, a second copy of the accessor
would be generated when processing the ObjCPropertyDecl. This can be
avoided by finding the existing method decl in
ClangExternalASTSourceCallbacks::FindExternalVisibleDeclsByName() and
adding it to the LookupPtr.
Differential Revision: https://reviews.llvm.org/D78333
This is a code clean up of the PropertyAttributeKind and
ObjCPropertyAttributeKind enums in ObjCPropertyDecl and ObjCDeclSpec that are
exactly identical. This non-functional change consolidates these enums
into one. The changes are to many files across clang (and comments in LLVM) so
that everything refers to the new consolidated enum in DeclObjCCommon.h.
2nd Landing Attempt...
Differential Revision: https://reviews.llvm.org/D77233
Summary:
The code in DWARFCompileUnit::BuildAddressRangeTable tries hard to avoid
relying on DW_AT_low/high_pc for compile unit range information, and
this logic is a big cause of llvm/lldb divergence in the lowest layers
of dwarf parsing code.
The implicit assumption in that code is that this information (as opposed to
DW_AT_ranges) is unreliable. However, I have not been able to verify
that assumption. It is definitely not true for all present-day
compilers (gcc, clang, icc), and it was also not the case for the
historic compilers that I have been able to get a hold of (thanks Matt
Godbolt).
All compiler included in my research either produced correct
DW_AT_ranges or .debug_aranges entries, or they produced no DW_AT_hi/lo
pc at all. The detailed findings are:
- gcc >= 4.4: produces DW_AT_ranges and .debug_aranges
- 4.1 <= gcc < 4.4: no DW_AT_ranges, no DW_AT_high_pc, .debug_aranges
present. The upper version range here is uncertain as godbolt.org does
not have intermediate versions.
- gcc < 4.1: no versions on godbolt.org
- clang >= 3.5: produces DW_AT_ranges, and (optionally) .debug_aranges
- 3.4 <= clang < 3.5: no DW_AT_ranges, no DW_AT_high_pc, .debug_aranges
present.
- clang <= 3.3: no DW_AT_ranges, no DW_AT_high_pc, no .debug_aranges
- icc >= 16.0.1: produces DW_AT_ranges
- icc < 16.0.1: no functional versions on godbolt.org (some are present
but fail to compile)
Based on this analysis, I believe it is safe to start trusting
DW_AT_low/high_pc information in dwarf as well as remove the code for
manually reconstructing range information by traversing the DIE
structure, and just keep the line table fallback. The only compilers
where this will change behavior are pre-3.4 clangs, which are almost 7
years old now. However, the functionality should remain unchanged
because we will be able to reconstruct this information from the line
table, which seems to be needed for some line-tables-only scenarios
anyway (haven't researched this too much, but at least some compilers
seem to emit DW_AT_ranges even in these situations).
In addition, benchmarks showed that for these compilers computing the
ranges via line tables is noticably faster than doing so via the DIE
tree.
Other advantages include simplifying the code base, removing some
untested code (the only test changes are recent tests with overly
reduced synthetic dwarf), and increasing llvm convergence.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78489
Pavel Labath wrote in D73206:
The internal representation of DebugNames and Apple indexes is fixed by
the relevant (pseudo-)standards, so we can't really change it. The
question is how to efficiently (and cleanly) convert from the internal
representation to some common thing. The conversion from AppleIndex to
DIERef is trivial (which is not surprising as it was the first and the
overall design was optimized for that). With debug_names, the situation
gets more tricky. The internal representation of debug_names uses
CU-relative DIE offsets, but DIERef wants an absolute offset. That means
the index has to do more work to produce the common representation. And
it needs to do that for all results, even though a lot of the index
users are really interested only in a single entry. With the switch to
user_id_t, _all_ indexes would have to do some extra work to encode it,
only for their users to have to immediately decode it back. Having
a iterator/callback based api would allow us to minimize the impact of
that, as it would only need to happen for the entries that are really
used. And /I think/ we could make it interface returns DWARFDies
directly, and each index converts to that using the most direct approach
available.
Jan Kratochvil:
It also makes all the callers shorter as they no longer need to fetch
DWARFDIE from DIERef (and handling if not found by ReportInvalidDIERef)
but the callers are already served DWARFDIE which they need.
In some cases the DWARFDIE had to be fetched both by callee (DWARFIndex
implementation) and caller.
Differential Revision: https://reviews.llvm.org/D77970
Summary:
One small step in my long running quest to improve python exception handling in
LLDB. Replace GetInteger() which just returns an int with As<long long> and
friends, which return Expected types that can track python exceptions
Reviewers: labath, jasonmolenda, JDevlieghere, vadimcn
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78462
This patch threads an lldb::DescriptionLevel through the typesystem to
allow dumping the full Clang AST (level=verbose) of any lldb::Type in
addition to the human-readable source description (default
level=full). This type dumping interface is currently not exposed
through the SBAPI.
The application is to let lldb-test dump the clang AST of search
results. I need this to test lazy type completion of clang types in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D78329
Fix a bug where UnwindAssemblyInstEmulation would confuse which
register is used to compute the Canonical Frame Address after it
had branched over a mid-function epilogue (where the CFA reg changes
from $fp to $sp in the process of epiloguing). Reinstate the
correct CFA register after we forward the unwind rule for branch
targets. The failure mode was that UnwindAssemblyInstEmulation
would think CFA was set in terms of $sp after one of these epilogues,
and if it sees modifications to $sp after the branch target, it would
change the CFA offset in the unwind rule -- even though the CFA is
defined in terms of $fp and the $sp changes are irrelevant to correct
calculation.
<rdar://problem/60300528>
Differential Revision: https://reviews.llvm.org/D78077
This is a no-op because it is set later on unconditionally again, but
it's far less confusing this way and consistent with how the setters
are initialized.
It removes some needless deep indentation and some redundant statements.
It prepares the code for a more clean next patch - DWARF index callbacks
D77327.
Differential Revision: https://reviews.llvm.org/D77326
Types that came from a Clang module are nested in DW_TAG_module tags
in DWARF. This patch recreates the Clang module hierarchy in LLDB and
1;95;0csets the owning module information accordingly. My primary motivation
is to facilitate looking up per-module APINotes for individual
declarations, but this likely also has other applications.
This reapplies the previously reverted commit, but without support for
ClassTemplateSpecializations, which I'm going to look into separately.
rdar://problem/59634380
Differential Revision: https://reviews.llvm.org/D75488
Discussed on lldb-dev with Pavel Labath. This doesn't work for
background processes [causes Python to be stuck forever], and it's
unclear whether it's needed. There's no test, also. If this turns
out to be useful, it can be recommitted with a functional implementation
and a test.
This is mostly useful for Swift support; it allows LLDB to substitute
a matching SDK it shipped with instead of the sysroot path that was
used at compile time.
The goal of this is to make the Xcode SDK something that behaves more
like the compiler's resource directory, as in that it ships with LLDB
rather than with the debugged program. This important primarily for
importing Swift and Clang modules in the expression evaluator, and
getting at the APINotes from the SDK in Swift.
For a cross-debugging scenario, this means you have to have an SDK for
your target installed alongside LLDB. In Xcode this will always be the
case.
rdar://problem/60640017
Differential Revision: https://reviews.llvm.org/D76471
Greg Clayton a few years ago.
My patch to augment the symbol table in Mach-O files with the
dyld trie exports data structure only categorized symbols as code
or data, but Greg Clayton had a patch to do something similar to
swift a few years ago that had a more extensive categorization of
symbols, as well as extracting some objc class/ivar names from the
entries. This patch is basically just Greg's, updated a bit and
with a test case added to it.
<rdar://problem/50791451>
Differential Revision: https://reviews.llvm.org/D77369
This patch adds parts of the stack that should be useful for unwinding
to the jThreadsInfo reply from lldb-server. We return the top of the
stack (12 words), and we also try to walk the frame pointer linked list
and return the memory containing frame pointer and return address pairs.
The idea is to cover the cases with and without frame pointer omission.
Differential Revision: https://reviews.llvm.org/D74398
Summary:
LLDB currently applies Fix-Its if they are attached to a Clang diagnostic that has the
severity "error". Fix-Its connected to warnings and other severities are supposed to
be ignored as LLDB doesn't seem to trust Clang Fix-Its in these situations.
However, LLDB also ignores all Fix-Its coming from "note:" diagnostics. These diagnostics
are usually emitted alongside other diagnostics (both warnings and errors), either to keep
a single diagnostic message shorter or because the Fix-It is in a different source line. As they
are technically their own (non-error) diagnostics, we currently are ignoring all Fix-Its associated with them.
For example, this is a possible Clang diagnostic with a Fix-It that is currently ignored:
```
error: <user expression 1>:2:10: too many arguments provided to function-like macro invocation
ToStr(0, {,})
^
<user expression 1>:1:9: macro 'ToStr' defined here
#define ToStr(x) #x
^
<user expression 1>:2:1: cannot use initializer list at the beginning of a macro argument
ToStr(0, {,})
^ ~~~~
```
We also don't store "note:" diagnostics at all, as LLDB's abstraction around the whole diagnostic
concept doesn't have such a concept. The text of "note:" diagnostics is instead
appended to the last non-note diagnostic (which is causing that there is no "note:" text in the
diagnostic above, as all the "note:" diagnostics have been appended to the first "error: ..." text).
This patch fixes the ignored Fix-Its in note-diagnostics by appending them to the last non-note
diagnostic, similar to the way we handle the text in these diagnostics.
Reviewers: JDevlieghere, jingham
Reviewed By: JDevlieghere
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D77055
This is a preparation for an upcoming patch which adds support for
DWARFv5 unit index sections. The patch adds tag "_EXT_" to identifiers
which reference sections that are deprecated in the DWARFv5 standard.
See D75929 for the discussion.
Differential Revision: https://reviews.llvm.org/D77141
Apparently the intention was to copy the condition above:
if (types.GetSize() >= max_matches)
break;
So that if the iteration stopped because of too many matches we do not
add even more matches in this 'Clang modules' block downward.
It was implemented by:
SymbolFileDWARF: Unconditionally scan through clang modules. NFCish
fe9eaadd68
Differential Revision: https://reviews.llvm.org/D77336
It is an obvious part of D77326.
It removes some needless deep indentation and some redundant statements.
It prepares the code for a more clean next patch - DWARF index callbacks
in D77327.
The old name was a bit misleading because the functions actually return
contributions to the corresponding sections.
Differential revision: https://reviews.llvm.org/D77302
Types that came from a Clang module are nested in DW_TAG_module tags
in DWARF. This patch recreates the Clang module hierarchy in LLDB and
sets the owning module information accordingly. My primary motivation
is to facilitate looking up per-module APINotes for individual
declarations, but this likely also has other applications.
rdar://problem/59634380
Differential Revision: https://reviews.llvm.org/D75488
The RuntimeFunction struct, which PECallFrameInfo interprets, has a
different layout and differnet semantics on all architectures.
Differential Revision: https://reviews.llvm.org/D77000
The FileCollector in LLDB collects every files that's used during a
debug session when capture is enabled. This ensures that the reproducer
only contains the files necessary to reproduce. This approach is not a
good fit for the dSYM bundle, which is a directory on disk, but should
be treated as a single unit.
On macOS LLDB have automatically find the matching dSYM for a binary by
its UUID. Having a incomplete dSYM in a reproducer can break debugging
even when reproducers are disabled.
This patch adds a was to specify a directory of interest to the
reproducers. It is called from SymbolVendorMacOSX with the path of the
dSYMs used by LLDB.
Differential revision: https://reviews.llvm.org/D76672
Leverage ARM ELF build attribute section to create ELF attribute section
for RISC-V. Extract the common part of parsing logic for this section
into ELFAttributeParser.[cpp|h] and ELFAttributes.[cpp|h].
Differential Revision: https://reviews.llvm.org/D74023
The FileCollector in LLDB collects every files that's used during a
debug session when capture is enabled. This ensures that the reproducer
only contains the files necessary to reproduce. This approach is not a
good fit for the dSYM bundle, which is a directory on disk, but should
be treated as a single unit.
On macOS LLDB have automatically find the matching dSYM for a binary by
its UUID. Having a incomplete dSYM in a reproducer can break debugging
even when reproducers are disabled.
This patch adds a was to specify a directory of interest to the
reproducers. It is called from SymbolVendorMacOSX with the path of the
dSYMs used by LLDB.
Differential revision: https://reviews.llvm.org/D76672
Summary:
D73024 seems to have fixed one set crash, but it introduced another.
Namely, if a class contains a covariant method returning itself, the
logic in MaybeCompleteReturnType could cause us to attempt a recursive
import, which would result in an assertion failure in
clang::DeclContext::removeDecl.
For some reason, this only manifested itself if the class contained at
least two member variables, and the class itself was imported as a
result of a recursive covariant import.
This patch fixes the crash by not attempting to import classes which are
already completed in MaybeCompleteReturnType. However, it's not clear to
me if this is the right fix, or if this should be handled automatically
by functions lower in the stack.
Reviewers: teemperor, shafik
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76840
LLDB only automatically applies Fix-Its from errors, but not from warnings.
Currently we only store Fix-Its from errors and then later apply all Fix-Its
we stored. This moves the filter to the application phase, so that we now
store *all* Fix-Its but only apply Fix-Its from errors later on.
This is NFC preparation for an upcoming patch.
Summary:
Currently top-level expressions won't automatically get Fix-Its applied. The reason
for that is that we only set the `m_fixed_text` member if we have a wrapping
source code (I.e. `m_source_code` is not zero and is wrapping some expressions).
This patch just always sets `m_fixed_text` to get this working.
Reviewers: labath, jingham
Reviewed By: labath
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D77042
In ObjectFileMachO we construct the symbol table from multiple
sources -- primarily the binary's nlist records, but when the nlist
symbols have been stripped, we would augment those with function
start address from the LC_FUNCTION_STARTS or eh_frame. This patch
adds another source of symbols - the exported symbols that the
dynamic linker, dyld, uses at runtime from its trie structure. This
provides us names and addresses for these functions/data.
This patch removes the code from ParseSymtab that would reject an
empty symbol table / nlist source. It adds a new symbols_added
set which tracks the address of every symbol we've added to the
symtab. We add symbols in most-information-ful order, and before
adding a symbol from less-informational-ful source (e.g.
LC_FUNCTION_STARTS with no function name), we check if that symbol
has already been added.
On targets with thumb code generation, instead of using the 0th bit
in these addresses in FunctionStarts (or now the trie entries), we
use the data field of FunctionStarts (formerly used to track if the
func_start should be added) and a flag for the trie entries to
encode this, and only store the actual addresses in the symbols_seen
and these vectors.
<rdar://problem/50791451>
Differential revision: https://reviews.llvm.org/D76758
CPlusPlusNameParser is used in several places on of them is during IR execution and setting breakpoints to pull information C++ like the basename, the context and arguments.
Currently it does not handle templated operator< properly, because of idiosyncrasy is how clang generates debug info for these cases.
It uses clang::Lexer which will tokenize operator<<A::B> into:
tok::kw_operator
tok::lessless
tok::raw_identifier
Later on the parser in ConsumeOperator() does not handle this case properly and we end up failing to parse.
Differential Revision: https://reviews.llvm.org/D76168
GetDeveloperDirectory returns a const char* which is NULL when we cannot
find the developer directory. This crashes in
PlatformDarwinKernel::CollectKextAndKernelDirectories because we're
unconditionally assigning it to a std::string. Coincidentally I just
refactored a bunch of code in PlatformMacOSX so instead of a ad-hoc fix
I've reimplemented the method based on GetXcodeContentsDirectory.
The change is mostly NFC. Obviously it fixes the crash, but it also
removes support for finding the Xcode directory through he legacy
$XCODE_SELECT_PREFIX_DIR/usr/share/xcode-select/xcode_dir_path.
Differential revision: https://reviews.llvm.org/D76938
When parsing DWARF and laying out bit-fields we currently don't take into account whether we have a base class or not.
Currently if the first field is a bit-field but the bit offset is due a field we inherit from a base class we currently
treat it as an unnamed bit-field and therefore add an extra field.
This fix will not check if we have a base class and assume that this offset is due to members we are inheriting from the base.
We are currently seeing asserts during codegen when debugging clang::DiagnosticOptions.
This assumption will fail in the case where the first field in the derived class in an unnamed bit-field. Fixing the first field
being an unnamed bit-field looks like it will require a larger change since we will need a way to track or discover the last field offset of the bases(s).
Differential Revision: https://reviews.llvm.org/D76808
In breakpad, only x86 (and mips) registers have a leading '$' in their
names. Arm architectures use plain register names.
Previously, lldb was assuming all registers have a '$'. Fix the code to
match the (unfortunately, inconsistent) reality.
lldbassert is the macro that takes care of passing along line/file/function
to the lldb_assert function. Let's call that instead of manually calling the
function.
Reland with changes: the test modified in this change originally failed
on a Debian/x86_64 builder, and I suspect the cause was that lldb looked
up the line location for an artificial frame by subtracting 1 from the
frame's address. For artificial frames, the subtraction must not happen
because the address is already exact.
---
lldb currently guesses the address to use when creating an artificial
frame (i.e., a frame constructed by determining the sequence of (tail)
calls which must have happened).
Guessing the address creates problems -- use the actual address provided
by the DW_AT_call_pc attribute instead.
Depends on D76336.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76337
Summary:
Currently we only log in debug builds but I don't see why we would do this as this is neither
expensive and seems useful.
I looked into the git history of this code and it seems originally there was also an assert here
and the logging here was the #else branch branch for non-Debug builds.
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76698
This reverts commit 6905394d15. The
changed test is failing on Debian/x86_64, possibly because lldb is
subtracting an offset from the DW_AT_call_pc address used for the
artificial frame:
http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/7171/steps/test/logs/stdio
/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/API/functionalities/tail_call_frames/unambiguous_sequence/main.cpp:6:17: error: CHECK-NEXT: expected string not found in input
// CHECK-NEXT: frame #1: 0x{{[0-9a-f]+}} a.out`func3() at main.cpp:14:3 [opt] [artificial]
^
<stdin>:3:2: note: scanning from here
frame #1: 0x0000000000401127 a.out`func3() at main.cpp:13:4 [opt] [artificial]
lldb currently guesses the address to use when creating an artificial
frame (i.e., a frame constructed by determining the sequence of (tail)
calls which must have happened).
Guessing the address creates problems -- use the actual address provided
by the DW_AT_call_pc attribute instead.
Depends on D76336.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76337
Summary:
This seems only useful for debugging and it's just plainly printf'ing to the console instead
of some log, so let's remove this.
Reviewers: #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76699
Files imported by the script interpreter aren't opened by LLDB so they
don't end up in the reproducer. The solution is to explicitly add them
to the FileCollector.
Differential revision: https://reviews.llvm.org/D76626
Summary:
The default behavior of Platform::PutFile is to open the file and
truncate it if it already exists. This works fine and is a sensible
default, but it interacts badly with code-signing on iOS, as doing so
invalidates the signature of the file (even if the new content has a
valid code signature).
We have a couple tests which on purpose reload a different binary with
the same name. Those tests are currently broken because of the above
interaction.
This patch simply makes the Darwin platform unconditionally delete the
destination file before sending the new one to work around this issue.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76450
There an option: EvaluateExpressionOptions::SetResultIsInternal to indicate
whether the result number should be returned to the pool or not. It
got broken when the PersistentExpressionState was refactored.
This fixes the issue and provides a test of the behavior.
Differential Revision: https://reviews.llvm.org/D76532
This adds a formatter for libc++ std::unique_ptr.
I also refactored GetValueOfCompressedPair(...) out of LibCxxList.cpp since I need the same functionality and it made sense to share it.
Differential Revision: https://reviews.llvm.org/D76476
(This is D68010 but I also set the new parameter in LibStdcpp.cpp to fix
the Debian tests).
Summary:
Printing a summary for an empty NSPathStore2 string currently prints random bytes behind the empty string pointer from memory (rdar://55575888).
It seems the reason for this is that the SourceSize parameter in the `ReadStringAndDumpToStreamOptions` - which is supposed to contain the string
length - actually uses the length 0 as a magic value for saying "read as much as possible from the buffer" which is clearly wrong for empty strings.
This patch adds another flag that indicates if we have know the string length or not and makes this behaviour dependent on that (which seemingly
was the original purpose of this magic value).
Reviewers: aprantl, JDevlieghere, shafik
Reviewed By: aprantl
Subscribers: christof, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68010
This reverts commit 939ca455e7.
This failed on the debian bot for some reason:
File "/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/API/functionalities/data-formatter/data-formatter-stl/libstdcpp/string/TestDataFormatterStdString.py", line 67, in test_with_run_command
"s summary wrong")
AssertionError: 'L"hello world! מזל טוב!\\0!\\0!!!!\\0\\0A\\0\\U0000fffd\\U0000fffd\\U0000fffd\\ [truncated]... != 'L"hello world! מזל טוב!"'
Diff is 2156 characters long. Set self.maxDiff to None to see it. : s summary wrong
Summary:
Printing a summary for an empty NSPathStore2 string currently prints random bytes behind the empty string pointer from memory (rdar://55575888).
It seems the reason for this is that the SourceSize parameter in the `ReadStringAndDumpToStreamOptions` - which is supposed to contain the string
length - actually uses the length 0 as a magic value for saying "read as much as possible from the buffer" which is clearly wrong for empty strings.
This patch adds another flag that indicates if we have know the string length or not and makes this behaviour dependent on that (which seemingly
was the original purpose of this magic value).
Reviewers: aprantl, JDevlieghere, shafik
Reviewed By: aprantl
Subscribers: christof, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68010
Summary:
The memory history plugin for Asan creates a HistoryThread with the
recorded PC values provided by the Asan runtime. In other cases,
thoses PCs are gathered by LLDB directly.
The PCs returned by the Asan runtime are the PCs of the calls in the
backtrace, not the return addresses you would normally get when
unwinding the stack (look for a call to GetPreviousIntructionPc in
AsanGetStack).
When the above addresses are passed to the unwinder, it will subtract
1 from each address of the non zero frames because it treats them as
return addresses. This can lead to the final report referencing the
wrong line.
This patch fixes this issue by threading a flag through HistoryThread
and HistoryUnwinder that tells them to treat every frame like the
first one. The Asan MemoryHistory plugin can then use this flag.
This fixes running TestMemoryHistory on arm64 devices, although it's
hard to guarantee that the test will continue to exhibit the boundary
condition that triggers this bug.
Reviewers: jasonmolenda, kubamracek
Subscribers: kristof.beyls, danielkiss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76341
This patch changes the way the StackFrame Recognizers match a certain
frame.
Until now, recognizers could be registered with a function
name but also an alternate symbol.
This change is motivated by a test failure for the Assert frame
recognizer on Linux. Depending the version of the libc, the abort
function (triggered by an assertion), could have more than two
signatures (i.e. `raise`, `__GI_raise` and `gsignal`).
Instead of only checking the default symbol name and the alternate one,
lldb will iterate over a list of symbols to match against.
rdar://60386577
Differential Revision: https://reviews.llvm.org/D76188
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The current implementation isn't very resilient when it comes to the
output of xcrun. Currently it cannot deal with:
- Trailing newlines.
- Leading newlines and errors/warnings before the Xcode path.
- Xcode not being named Xcode.app.
This extract the logic into a helper in PlatformDarwin and fixes those
issues. It's also the first step towards removing code duplication
between the different platforms and downstream Swift.
Differential revision: https://reviews.llvm.org/D76261
Fix to get the AST we generate for function templates closer to what clang generates and expects.
We fix which FuntionDecl we are passing to CreateFunctionTemplateSpecializationInfo and we strip
template parameters from the name when creating the FunctionDecl and FunctionTemplateDecl.
These two fixes together fix asserts and ambiguous lookup issues for several cases which are added to the already existing small function template test.
This fixes issues with overloads, overloads and ADL, variadic function templates and templated operator overloads.
Differential Revision: https://reviews.llvm.org/D75761
The GDB replay server sanity-checks that every packet it receives
matches what it expects from the serialized packet log. This mechanism
tripped for TestReproducerAttach.py on Linux, because one of the packets
(jModulesInfo) uses run-length encoding. The replay server was comparing
the expanded incoming packet with the unexpanded packet in the log. As a
result, it claimed to have received an unexpected packet, which caused
the test to fail.
This patch addresses that issue by expanding the run-length encoding
before comparing the packets.
Differential revision: https://reviews.llvm.org/D76163
The nullptr check here was removed in 4ef50a33b1
when I replaced (nearly) all log->Print to LLDB_LOG calls (which automatically
check for this stuff). But it seems this one call escaped my sed call.
Currently working on a test that can cover this code path but we can revert
this until I have found one.
If a producer emits a nonzero segment size, `lldb` will silently read
incorrect values and crash, or do something worse later as the tuple
size is expected to be 2, rather than 3.
Neither LLVM, nor GCC produce segmented aranges, but this dangerous case
should still be checked and handled.
Reviewed by: clayborg, labath
Differential Revision: https://reviews.llvm.org/D75925
Subscribers: lldb-commits
Tags: #lldb
Most clients of SourceManager.h need to do things like turning source
locations into file & line number pairs, but this doesn't require
bringing in FileManager.h and LLVM's FS headers.
The main code change here is to sink SM::createFileID into the cpp file.
I reason that this is not performance critical because it doesn't happen
on the diagnostic path, it happens along the paths of macro expansion
(could be hot) and new includes (less hot).
Saves some includes:
309 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileManager.h
272 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileSystemOptions.h
271 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/VirtualFileSystem.h
267 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/FileSystem.h
266 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/Chrono.h
Differential Revision: https://reviews.llvm.org/D75406
Module.h takes 86ms to parse, mostly parsing the class itself. Avoid it
if possible. ASTContext.h depends on ExternalASTSource.h.
A few NFC changes were needed to make this possible:
- Move ASTSourceDescriptor to Module.h. This needs Module to be
complete, and seems more related to modules and AST files than
external AST sources.
- Move "import complete" bit from Module* pointer int pair to
NextLocalImport pointer. Required because PointerIntPair<Module*,...>
requires Module to be complete, and now it may not be.
Reviewed By: aaron.ballman, hans
Differential Revision: https://reviews.llvm.org/D75784
Badly-written code can combine an unrelated TypeSystem and opaque type
pointer into a CompilerType. This is particularly an issue in
swift-lldb. This patch adds an assertion mechanism that catches these
kinds of mistakes early. Because this is an assertion-only code path
there is not cost for release builds.
Differential Revision: https://reviews.llvm.org/D76011
Summary:
This is the only real unwinder, and things have been this way for quite
a long time. At this point, the class has accumulated so many features
it is unlikely that anyone will want to reimplement the whole thing.
The class is also fairly closely coupled (through UnwindPlans and
FuncUnwinders) with a lot of other lldb components that it is hard to
imagine a different unwinder implementation being substantially
different without reimplementing all of those.
The existing unwinding functionality is nonetheless fairly complex and
there is space for adding more structure to it, but I believe a more
worthwhile effort would be to take the existing UnwindLLDB class and try
to break it down and introduce extension/customization points, instead
of writing a brand new Unwind implementation.
Reviewers: jasonmolenda, JDevlieghere, xiaobai
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75848
Summary:
The class has two pairs of functions whose functionalities differ in
only how one specifies how much he wants to disasseble. One limits the
process by the size of the input memory region. The other based on the
total amount of instructions disassembled. They also differ in various
features (like error reporting) that were only added to one of the
versions.
There are various ways in which this could be addressed. This patch
does it by introducing a helper struct called "Limit", which is
effectively a pair specifying the value that you want to limit, and the
actual limit itself.
Reviewers: JDevlieghere
Subscribers: sdardis, jrtc27, atanasyan, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75730
Summary:
Otherwise this code won't run on the Release+Asserts builds we have on the CI.
Fixes rdar://problem/59867885 (partly)
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75493
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Jonas Devlieghere