This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
plan generator.
Fix a small bug in EmulateInstructionARM64::GetFramePointerRegister
which was returning the stack pointer reg instead of fp, prevented
the unwinder from recognizing the switch to using the fp in a
function. (<rdar://problem/28663117>)
Add a new eContextRestoreStackPointer context hint so that the arm64
emulator can flag when the frame pointer value is copied back in to
the stack pointer and that should be used to compute the canonical
frame address again in an epilogue sequence. (<rdar://problem/28704862>)
Small changes to UnwindAssemblyInstEmulation to have a method we can
call without a live process/thread/etc for unit tests.
<rdar://problem/28663117>
<rdar://problem/28704862>
<rdar://problem/28509178>
llvm-svn: 283847
unittests. If I have time, I'd like to see if I can write some
tests of the eh_frame augmentation which is a wholly separate code
path (it seems like maybe it should be rolled into the main instruction
scanning codepath, to be honest, and operate on the generated
UnwindPlan instead of bothering with raw instructions at all).
Outside the eh_frame augmentation, I'm comfortable that this unwind
generator is being tested well now.
llvm-svn: 283186
'push 0x20(%esp)' which clang can generate when emitting
-fomit-frame-pointer code for 32-bit.
Add a unit test program which includes this instruction.
Also fix a bug in the refactoring/rewrite of the x86 assembly
instruction profiler where I'd hard coded it as a 64-bit disassembler
instead of using the ArchSpec to pick a 32-bit or 64-bit disassembler
from llvm. When the disassembler would hit an instruction
that is invalid in 64-bit mode, it would stop disassembling the function.
This likely led to the TestSBData testsuite failure on linux with 32-bit
i386 and gcc-4.9; I'll test that in a bit.
The newly added unit test program is 32-bit i386 code and it includes
an instruction which is invalid in 64-bit mode so it will catch this.
<rdar://problem/28557876>
llvm-svn: 282991
a linux bot test failure. That one is fixed; hopefully there won't
be any others turned up this time.
The eh_frame augmentation code wasn't working right after the
reorg/rewrite of the classes. It works correctly now for the one
test that was failing - but we'll see what the test bots come up
with.
<rdar://problem/28509178>
llvm-svn: 282659
A testbot found a regression introduced in the testsuite with
the changes in r282565 on Ubuntu (TestStepNoDebug.ReturnValueTestCase).
I'll get this set up on an ubuntu box and figure out what is happening
there -- likely a problem with the eh_frame augmentation, which isn't
used on macosx.
llvm-svn: 282566
x86AssemblyInspectionEngine and the current UnwindAssembly_x86 to
allow for the core engine to be exercised by unit tests.
The UnwindAssembly_x86 class will have access to Targets, Processes,
Threads, RegisterContexts -- it will be working in the full lldb
environment.
x86AssemblyInspectionEngine is layered away from all of that, it is
given some register definitions and a bag of bytes to profile.
I wrote an initial unittest for a do-nothing simple x86_64/i386
function to start with. I'll be adding more.
The x86 assembly unwinder was added to lldb early in its bringup;
I made some modernization changes as I was refactoring the code
to make it more consistent with how we write lldb today.
I also added RegisterContextMinidump_x86_64.cpp to the xcode project
file so I can run the unittests from that.
The testsuite passes with this change, but there was quite a bit of
code change by the refactoring and it's possible there are some
issues. I'll be testing this more in the coming days, but it looks
like it is behaving correctly as far as I can tell with automated
testing.
<rdar://problem/28509178>
llvm-svn: 282565
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This change is improving the instruction emulation based unwinding to
handle when the frame pointer is adjusted (increment/decrement) after
it has been initialized. The situation can occur in the prologue of
some function where FP is adjusted before it is copied back to SP.
Example code (thumb, generated by gcc 4.8):
< +0>: push {r4, r7, lr}
< +2>: sub sp, #0x14
< +4>: add r7, sp, #0x0
...
<+50>: adds r7, #0x14 ; The CL fixes the handling of this instruction
<+52>: mov sp, r7 ; Previously unwinding from here was broken
<+54>: pop {r4, r7, pc}
Differential revision: http://reviews.llvm.org/D17295
llvm-svn: 261318
The IT instruction can specify condition code for up to 4 consecutive
instruction and it is used quite often by clang in epilogues causing
an issue when trying to unwind from locations covered by the IT
instruction and for locatins inmediately after the IT instruction.
Changes made to fix it:
* Introduce the concept of conditional instruction block what is a list
of consecutive instructions with the same condition. We update the
unwind information during the conditional instruction block and when
we reach the end of it (first instruction with a differemt condition)
then we restore the unwind information we had before the condition.
* Fix a bug in the ARM instruction emulator where neither PC nor the
ITSTATE was advanced when we reached an instruction what we can't
decode.
After the change we have no regression on android-arm running the
regular test suit and TestStandardUnwind also passes when running it
with clang as the compiler (previously it failed on an IT instruction).
Differential revision: http://reviews.llvm.org/D16814
llvm-svn: 260368
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
Change the way EmulateInstruction::eContextPopRegisterOffStack handled
in UnwindAssemblyInstEmulation::WriteRegister to accomodate for
additional cases when eContextPopRegisterOffStack (pop PC/FLAGS).
llvm-svn: 245690
On ARM there is no difference petween a pop and a load instruction so
a register can be loaded multiple times during the function. Add check
to threat the load as a restore only if it do the restore from the
same location where the register was saved.
Differential revision: http://reviews.llvm.org/D11947
llvm-svn: 245546
Don't chane the CFI information when a conditional instruction
is emulated (eg.: popeq {r0, pc}) because the CFI for the next
instruction should be the same as the CFI for the current instruction.
Differential revision: http://reviews.llvm.org/D11258
llvm-svn: 242519
Summary: This aligns the library names used by the Makefile build to be the same as those create by the CMake build to make switching between the two easier. The only major difficulty was lldbHost which was one library in the CMake system and several in the Makefile system. Most of the other changes are trivial renames.
Reviewers: labath
Subscribers: emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11154
llvm-svn: 242196
These instructions confusing the unwind code because in case of a
push it assumes that the original valu of a register is pushed to
the stack what is not neccessarily true in case of SP. The same is
true for the pop (in the opposite way).
Differential revision: http://reviews.llvm.org/D10806
llvm-svn: 241051
The emulation of the branches are required by the new stack
unwinding logic to reinstantiate the prologue at the right place.
Differential revision: http://reviews.llvm.org/D10702
llvm-svn: 240769
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
Gcc for android use the leal instruction to substract from the stack
pointer in the prologue of a function call. This patch add basic support
for evaluating this instruction to support stack unwinding on
android-x86.
Differential revision: http://reviews.llvm.org/D8583
llvm-svn: 233178
Summary:
This is initial implementation of assembly profiler which only scans prologue/epilogue assembly instructions to create CFI instructions.
Reviewers: clayborg, jasonmolenda
Differential Revision: http://reviews.llvm.org/D7696
llvm-svn: 232619
This continues the effort to reduce header footprint and improve
build speed by removing clang and other unnecessary headers
from Target.h. In one case, some headers were included solely
for the purpose of declaring a nested class in Target, which was
not needed by anybody outside the class. In this case the
definition and implementation of the nested class were isolated
in the .cpp file so the header could be removed.
llvm-svn: 231107
Summary:
This change refactors UnwindPlan::Row to be able to store the fact that the CFA is value is set
by evaluating a dwarf expression (DW_CFA_def_cfa_expression). This is achieved by creating a new
class CFAValue and moving all CFA setting/getting code there. Note that code using the new
CFAValue::isDWARFExpression is not yet present and will be added in a follow-up patch. Therefore,
this patch should not change the functionality in any way.
Test Plan: Ran tests on Mac and Linux. No regressions detected.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7755
llvm-svn: 230210
changing it was in r219544 - after living on that for a few
months, I wanted to take another crack at this.
The disassembly-format setting still exists and the old format
can be user specified with a setting like
${current-pc-arrow}${addr-file-or-load}{ <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>}:
This patch was discussed in http://reviews.llvm.org/D7578
<rdar://problem/19726421>
llvm-svn: 229186
signed and unsigned types in comparisons.
For the text offset, use the addr_t type that is used elsewhere to get
these kinds of offsets, and which it is being compared against. This
seems to make things more consistent.
For the other, the numbers are clearly small and uninteresting, so just
cast them to the most boring 'int' type.
llvm-svn: 229085
Why? Debugger::FormatPrompt() would run through the format prompt every time and parse it and emit it piece by piece. It also did formatting differently depending on which key/value pair it was parsing.
The new code improves on this with the following features:
1 - Allow format strings to be parsed into a FormatEntity::Entry which can contain multiple child FormatEntity::Entry objects. This FormatEntity::Entry is a parsed version of what was previously always done in Debugger::FormatPrompt() so it is more efficient to emit formatted strings using the new parsed FormatEntity::Entry.
2 - Allows errors in format strings to be shown immediately when setting the settings (frame-format, thread-format, disassembly-format
3 - Allows auto completion by implementing a new OptionValueFormatEntity and switching frame-format, thread-format, and disassembly-format settings over to using it.
4 - The FormatEntity::Entry for each of the frame-format, thread-format, disassembly-format settings only replaces the old one if the format parses correctly
5 - Combines all consecutive string values together for efficient output. This means all "${ansi.*}" keys and all desensitized characters like "\n" "\t" "\0721" "\x23" will get combined with their previous strings
6 - ${*.script:} (like "${var.script:mymodule.my_var_function}") have all been switched over to use ${script.*:} "${script.var:mymodule.my_var_function}") to make the format easier to parse as I don't believe anyone was using these format string power user features.
7 - All key values pairs are defined in simple C arrays of entries so it is much easier to add new entries.
These changes pave the way for subsequent modifications where we can modify formats to do more (like control the width of value strings can do more and add more functionality more easily like string formatting to control the width, printf formats and more).
llvm-svn: 228207
saved/restored across a mid-function epilogue. We ignore
repeated push/pops of a register so once we saw one 'pop %rbp',
we'd ignore it the second time we saw it.
<rdar://problem/19417410>
llvm-svn: 225853
it will do the right thing on x86 routines with a mid-function
epilogue sequence (where the unwind rules need to be reinstalled
after the epilogue has completed).
<rdar://problem/19417410>
llvm-svn: 225773
which will verify if the eh_frame instructions include details about
the prologue or not. Both clang and gcc include prologue instructions
but there's no requirement for them to do so -- and I'm sure we'll
have to interoperate with a compiler that doesn't generate prologue
info at some point.
I don't have any compilers that omit the prologue instructions so the
testing was of the "makre sure augmented unwind info is still created".
With an eh_frame without prologue, this code should reject the
augmentation scheme altogether and we should fall back to using assembly
instruction profiling.
llvm-svn: 225771
step through the complete function looking for any epilogue
instructions. If we find an epilogue sequence, re-instate
the correct unwind instructions if there is more code past
that epilogue -- this will correctly handle an x86 function
with multiple epilogues in it.
NB there is still a bug with the "eh_frame augmented"
UnwindPlans and mid-function epilogues. Looking at that next.
<rdar://problem/18863406>
llvm-svn: 225770
it more generally available.
Add checks to UnwindAssembly_x86::AugmentUnwindPlanFromCallSite() so
that it won't try to augment an UnwindPlan that already describes
the function epilogue.
Add a test case for backtracing out of _sigtramp on Darwin systems.
This could probably be adapted to test the same thing on linux/bsd but
the function names of sigtramp and kill are probably platform
specific and I'm not sure what they should be.
llvm-svn: 225578
which registers have been spilled (saved to the stack) - and
if we see that same register being saved to the stack again,
don't record that, it's something specific to this stack frame.
I found a code sequence for i386 where clang did a push %esi
and then later in the function it did movl %esi, -0x7c(%ebp)
and that second save of a scratch value overrode the original
push location.
<rdar://problem/19171178>
llvm-svn: 225431
Most of the changes are to the FuncUnwinders class -- as we've added
more types of unwind information, the way this class was written was
making it a mess to maintain. Instead of trying to keep one
"non-call site" unwind plan and one "call site" unwind plan, track
all the different types of unwind plans we can possibly retrieve for
each function and have the call-site/non-call-site accessor methods
retrieve those.
Add a real "fast unwind plan" for x86_64 / i386 -- when doing an
unwind through a function, this only has to read the first 4 bytes
to tell if the function has a standard prologue sequence. If so,
we can use the architecture default unwind plan to backtrace
through this function. If we try to retrieve the save location for
other registers later on, a real unwind plan will be used. This
one is just for doing fast backtraces.
Change the compact unwind plan importer to fill in the valid address
range it is valid for.
Compact unwind, in theory, may have multiple entries for a single
function. The FuncUnwinders rewrite includes the start of supporting
this correctly. In practice compact unwind encodings are used for
the entire range of the function today -- in fact, sometimes the same
encoding is used for multiple functions that have the same unwind
rules. But I want to handle a single function that has multiple
different compact unwind UnwindPlans eventually.
llvm-svn: 224689
section for x86_64 and i386 targets on Darwin systems. Currently only the
compact unwind encoding for normal frame-using functions is supported but it
will be easy handle frameless functions when I have a bit more free time to
test it. The LSDA and personality routines for functions are also retrieved
correctly for functions from the compact unwind section.
This new code is very fresh -- it passes the lldb testsuite and I've done
by-hand inspection of many functions and am getting correct behavior for all
of them. There may need to be some bug fixing over the next couple weeks as
I exercise and test it further. But I think it's fine right now so I'm
committing it.
<rdar://problem/13220837>
llvm-svn: 223625
MSVC warns that not all control paths return a value when a switch
doesn't have a default case handler. Changed explicit value checks
to a default check.
Also, it caught a case where bitwise AND was being used instead of
logical AND. I'm not sure what this fixes, but presumably it is
not covered by any kind of test case.
llvm-svn: 221636
a nop). Fixes an instruction stepping problem when trying to step
over the final instructions of an epilogue.
<rdar://problem/18068877>
llvm-svn: 221241
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
I wrote this originally as a part of an unwind library that was using
a different coding convention and some of that old style remained after
its integration into lldb.
llvm-svn: 216419
We decided to use assmbly profiler instead of eh_frame for frame 0 because for compiler generated code, eh_frame is usually synchronous(a.k.a. only valid at call site); and we have no way to tell if it's asynchronous or not.
But for x86 & x86_64 compiler generated code:
1. clang & GCC describes all prologue instructions in eh_frame;
2. mid-function stack pointer altering instructions can be easily detected.
So we can grab eh_frame, and use assembly profiler to augment it into asynchronous unwind table.
This change also benefits hand-written assembly; eh_frame for hand-written assembly is often asynchronous,so we have a much better chance to successfully unwind through them.
Change by Tong Shen.
llvm-svn: 216406
to recognize an epilogue that ends with a jmp to
objc_retainAutoreleaseReturnValue instead of a ret instruction.
<rdar://problem/17889928>
llvm-svn: 214783
This change has the practical effect of fixing some backtrace
scenarios that would fail with inferiors running on the Android Art
host-side JVM under Linux x86_64 on Ubuntu 14.04.
See this lldb-commits thread for more details:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140721/011988.html
Change by Tong Shen.
Reviewed by Jason Molenda.
Tested:
Ubuntu 14.04 x86_64, clang-3.5-built lldb.
MacOSX 10.10 Preview 4, Xcode 6 Beta 4-built lldb.
llvm-svn: 213914
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
the CFA instructions when it was profiling an -fomit-frame-pointer function
and a "volatile" register was saved on the stack (e.g. an argument register).
<rdar://problem/15036546>
llvm-svn: 191267
with prefer_file_cache == false. This is what we want to do when
the user is doing a disassemble command -- show the actual memory
contents in case the memory has been corrupted or something -- but
when we're profiling functions for stepping or unwinding
(ThreadPlanStepRange::GetInstructionsForAddress,
UnwindAssemblyInstEmulation::GetNonCallSiteUnwindP) we can read
__TEXT instructions directly out of the file, if it exists.
<rdar://problem/14397491>
llvm-svn: 190638
list have a shared pointer back to their DisassemblerLLVMC. This checkin force clears the InstructionList
in all the places we use the DisassemblerSP to stop the leaking for now. I'll go back and fix this
for real when I have time to do so.
<rdar://problem/14581918>
llvm-svn: 187473
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
Calculate "can branch" using the MC API's rather than our hand-rolled regex'es.
As extra credit, allow setting the disassembly flavor for x86 based architectures to intel or att.
<rdar://problem/11319574>
<rdar://problem/9329275>
llvm-svn: 176392
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
The results from Clang name lookups changed to
be ArrayRefs, so I had to change the way we
check for the presence of a result and the way
we iterate across results.
llvm-svn: 170927
Full UnwindPlan is trying to do an impossible unwind; in that case
invalidate the Full UnwindPlan and replace it with the architecture
default unwind plan.
This is a scenario that happens occasionally with arm unwinds in
particular; the instruction analysis based full unwindplan can
mis-parse the functions and the stack walk stops prematurely. Now
we can do a simpleminded frame-chain walk to find the caller frame
and continue the unwind. It's not ideal but given the complicated
nature of analyzing the arm functions, and the lack of eh_frame
information on iOS, it is a distinct improvement and fixes some
long-standing problems with the unwinder on that platform.
This is fixing <rdar://problem/12091421>. I may re-use this
invalidate feature in the future if I can identify other cases where
the full unwindplan's unwind information is clearly incorrect.
This checkin also includes some cleanup for the volatile register
definition in the arm ABI plugin for <rdar://problem/10652166>
although work remains to be done for that bug.
llvm-svn: 166757
the function's prologue instructions so we can re-instate that prologue
if we hit an early return mid-function. Add some additional heuristics
to differentiate between prologue and epilogue instruction sequences.
This fixes the specific problem of correctly unwinding through a function
which has an epilogue one instruction after the last prologue setup
instruction has completed.
<rdar://problem/12091139>
llvm-svn: 166465
to handle an addition class of early-return instructions we find in arm code:
tail-call optimziation returns where we restore the register state from the
function entry and jump directly (not branch & link) to another function --
when that other function returns, it will return to our caller.
Previously this mid-function epilogue sequence was not being correctly detected.
We would not re-instate the prologue setup instructions for the rest of the function
so unwinds would break from that point until the end of the function.
<rdar://problem/12502597>
llvm-svn: 166081
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
return 0x0 as the read value instead of uninitialized
stack data so we get consistent behavior from the
emulator.
<rdar://problem/12058770>
llvm-svn: 161795
the state of the unwind instructions once the prologue has finished. If it hits an
early return epilogue in the middle of the function, re-instate the prologue after that
epilogue has completed so that we can still unwind for cases where the flow of control
goes past that early-return. <rdar://problem/11775059>
Move the UnwindPlan operator== definition into the .cpp file, expand the definition a bit.
Add some casts to a SBCommandInterpreter::HandleCompletion() log statement so it builds without
warning on 64- and 32-bit systems.
llvm-svn: 160337
a shared pointer to ease some memory management issues with a patch
I'm working on.
The main complication with using SPs for these objects is that most
methods that build up an UnwindPlan will construct a Row to a given
instruction point in a function, then add additional regsaves in
the next instruction point to that row and push it again. A little
care is needed to not mutate the previous instruction point's Row
once these are switched to being held behing shared pointers.
llvm-svn: 160214
frame pointer overwritten with the caller's fp value, return to
expressing the CFA in terms of the stack pointer.
<rdar://problem/11855862>
llvm-svn: 160150
a bit -- we're creating the UnwindPlan here, we can set the register set to
whatever is convenient for us, no need to handle different register sets.
A handful of small comment fixes I noticed while reading through the code.
llvm-svn: 159924
these functions will end in the sequence
mov %rbp, %rsp
ret
call __stack_chk_fail
instead of the usual mov, ret. The x86 assembly profiler only looked
for functions ending in 'ret' and added the Unwind row describing how to
set the CFA based on that -- the addition of the call insn (which is jumped
to earlier in the function body) threw off that inspection.
Resolves the need to "step" twice to get out of these functions when doing
source-level stepping.
<rdar://problem/11469705>
llvm-svn: 157454
Fixed the DisassemblerLLVMC disassembler to parse more efficiently instead of parsing opcodes over and over. The InstructionLLVMC class now only reads the opcode in the InstructionLLVMC::Decode function. This can be done very efficiently for ARM and architectures that have fixed opcode sizes. For x64 it still calls the disassembler to get the byte size.
Moved the lldb_private::Instruction::Dump(...) function up into the lldb_private::Instruction class and it now uses the function that gets the mnemonic, operandes and comments so that all disassembly is using the same code.
Added StreamString::FillLastLineToColumn() to allow filling a line up to a column with a character (which is used by the lldb_private::Instruction::Dump(...) function).
Modified the Opcode::GetData() fucntion to "do the right thing" for thumb instructions.
llvm-svn: 156532
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.
Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.
llvm-svn: 151009
shared pointers.
Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.
Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.
Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.
llvm-svn: 140298
the arm emulate instruction unwinder so you can leave it
on by default and not be overwhelmed. Set verbose mode to
get the full story on how the unwindplans were created.
llvm-svn: 139897
the appropriate registers for arm and x86_64. The register names for the
arguments that are the size of a pointer or less are all named "arg1", "arg2",
etc. This allows you to read these registers by name:
(lldb) register read arg1 arg2 arg3
...
You can also now specify you want to see alternate register names when executing
the read register command:
(lldb) register read --alternate
(lldb) register read -A
llvm-svn: 131376
thread plan. In order to get the return value, you can call:
void
ThreadPlanCallFunction::RequestReturnValue (lldb::ValueSP &return_value_sp);
This registers a shared pointer to a return value that will get filled in if
everything goes well. After the thread plan is run the return value will be
extracted for you.
Added an ifdef to be able to switch between the LLVM MCJIT and the standand JIT.
We currently have the standard JIT selected because we have some work to do to
get the MCJIT fuctioning properly.
Added the ability to call functions with 6 argument in the x86_64 ABI.
Added the ability for GDBRemoteCommunicationClient to detect if the allocate
and deallocate memory packets are supported and to not call allocate memory
("_M") or deallocate ("_m") if we find they aren't supported.
Modified the ProcessGDBRemote::DoAllocateMemory(...) and ProcessGDBRemote::DoDeallocateMemory(...)
to be able to deal with the allocate and deallocate memory packets not being
supported. If they are not supported, ProcessGDBRemote will switch to calling
"mmap" and "munmap" to allocate and deallocate memory instead using our
trivial function call support.
Modified the "void ProcessGDBRemote::DidLaunchOrAttach()" to correctly ignore
the qHostInfo triple information if any was specified in the target. Currently
if the target only specifies an architecture when creating the target:
(lldb) target create --arch i386 a.out
Then the vendor, os and environemnt will be adopted by the target.
If the target was created with any triple that specifies more than the arch:
(lldb) target create --arch i386-unknown-unknown a.out
Then the target will maintain its triple and not adopt any new values. This
can be used to help force bare board debugging where the dynamic loader for
static files will get used and users can then use "target modules load ..."
to set addressses for any files that are desired.
Added back some convenience functions to the lldb_private::RegisterContext class
for writing registers with unsigned values. Also made all RegisterContext
constructors explicit to make sure we know when an integer is being converted
to a RegisterValue.
llvm-svn: 131370
respective ABI plugins as they were plug-ins that supplied ABI specfic info.
Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.
Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.
llvm-svn: 131193
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:
virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);
virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);
There is now a new class specifically designed to hold register values:
lldb_private::RegisterValue
The new register context calls that subclasses must implement are:
virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue ®_value) = 0;
virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue ®_value) = 0;
The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..).
All RegiterContext and other sources have been switched over to using the new
regiter value class.
llvm-svn: 131096
Switch the EmulateInstruction to use the standard RegisterInfo structure
that is defined in the lldb private types intead of passing the reg kind and
reg num everywhere. EmulateInstruction subclasses also need to provide
RegisterInfo structs given a reg kind and reg num. This eliminates the need
for the GetRegisterName() virtual function and allows more complete information
to be passed around in the read/write register callbacks. Subclasses should
always provide RegiterInfo structs with the generic register info filled in as
well as at least one kind of register number in the RegisterInfo.kinds[] array.
llvm-svn: 130256
are defined as enumerations. Current bits include:
eEmulateInstructionOptionAutoAdvancePC
eEmulateInstructionOptionIgnoreConditions
Modified the EmulateInstruction class to have a few more pure virtuals that
can help clients understand how many instructions the emulator can handle:
virtual bool
SupportsEmulatingIntructionsOfType (InstructionType inst_type) = 0;
Where instruction types are defined as:
//------------------------------------------------------------------
/// Instruction types
//------------------------------------------------------------------
typedef enum InstructionType
{
eInstructionTypeAny, // Support for any instructions at all (at least one)
eInstructionTypePrologueEpilogue, // All prologue and epilogue instructons that push and pop register values and modify sp/fp
eInstructionTypePCModifying, // Any instruction that modifies the program counter/instruction pointer
eInstructionTypeAll // All instructions of any kind
} InstructionType;
This allows use to tell what an emulator can do and also allows us to request
these abilities when we are finding the plug-in interface.
Added the ability for an EmulateInstruction class to get the register names
for any registers that are part of the emulation. This helps with being able
to dump and log effectively.
The UnwindAssembly class now stores the architecture it was created with in
case it is needed later in the unwinding process.
Added a function that can tell us DWARF register names for ARM that goes
along with the source/Utility/ARM_DWARF_Registers.h file:
source/Utility/ARM_DWARF_Registers.c
Took some of plug-ins out of the lldb_private namespace.
llvm-svn: 130189
Zachary Turner