Summary: We can fill in the command line and compiler path later if we want.
Reviewers: zturner
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53179
llvm-svn: 344393
Summary:
Use the newly added DebugInfo (DI) Trivial flag, which indicates if a C++ record is trivial or not, to determine Codeview::FunctionOptions.
Clang and MSVC generate slightly different Codeview for C++ records. For example, here is the C++ code for a class with a defaulted ctor,
class C {
public:
C() = default;
};
Clang will produce a LF for the defaulted ctor while MSVC does not. For more details, refer to FIXMEs in the test cases in "function-options.ll" included with this set of changes.
Reviewers: zturner, rnk, llvm-commits, aleksandr.urakov
Reviewed By: rnk
Subscribers: Hui, JDevlieghere
Differential Revision: https://reviews.llvm.org/D45123
llvm-svn: 343626
Add the .cv_fpo_stackalign directive so that we can define $T0, or the
VFRAME virtual register, with it. This was overlooked in the initial
implementation because unlike MSVC, we push CSRs before allocating stack
space, so this value is only needed to describe local variable
locations. Variables that the compiler now addresses via ESP are instead
described as being stored at offsets from VFRAME, which for us is ESP
after alignment in the prologue.
This adds tests that show that we use the VFRAME register properly in
our S_DEFRANGE records, and that we emit the correct FPO data to define
it.
Fixes PR38857
llvm-svn: 343603
Summary:
Before this change, LLVM would always describe locals on the stack as
being relative to some specific register, RSP, ESP, EBP, ESI, etc.
Variables in stack memory are pretty common, so there is a special
S_DEFRANGE_FRAMEPOINTER_REL symbol for them. This change uses it to
reduce the size of our debug info.
On top of the size savings, there are cases on 32-bit x86 where local
variables are addressed from ESP, but ESP changes across the function.
Unlike in DWARF, there is no FPO data to describe the stack adjustments
made to push arguments onto the stack and pop them off after the call,
which makes it hard for the debugger to find the local variables in
frames further up the stack.
To handle this, CodeView has a special VFRAME register, which
corresponds to the $T0 variable set by our FPO data in 32-bit. Offsets
to local variables are instead relative to this value.
This is part of PR38857.
Reviewers: hans, zturner, javed.absar
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D52217
llvm-svn: 343543
Enable enableMultipleCopyHints() on X86.
Original Patch by @jonpa:
While enabling the mischeduler for SystemZ, it was discovered that for some reason a test needed one extra seemingly needless COPY (test/CodeGen/SystemZ/call-03.ll). The handling for that is resulted in this patch, which improves the register coalescing by providing not just one copy hint, but a sorted list of copy hints. On SystemZ, this gives ~12500 less register moves on SPEC, as well as marginally less spilling.
Instead of improving just the SystemZ backend, the improvement has been implemented in common-code (calculateSpillWeightAndHint(). This gives a lot of test failures, but since this should be a general improvement I hope that the involved targets will help and review the test updates.
Differential Revision: https://reviews.llvm.org/D38128
llvm-svn: 342578
Now that we create the label at the point of the directive, we don't
need to set the "current CV location", and then later when we emit the
next instruction, create a label for it and emit it.
DWARF still defers the labels used in .debug_loc until the next
instruction or value, for reasons unknown.
llvm-svn: 340883
Fix a set of related bugs:
* Considering two locations as equivalent when their lines are the same
but their scopes are different causes erroneous debug info that
attributes a commoned call to be attributed to one of the two calls it
was commoned from.
* The previous code to compute a new location's scope was inaccurate and
would use the inlinedAt that was the /parent/ of the inlinedAt that is
the nearest common one, and also used that parent scope instead of the
nearest common scope.
* Not generating new locations generally seemed like a lower quality
choice
There was some risk that generating more new locations could hurt object
size by making more fine grained line table entries, but it looks like
that was offset by the decrease in line table (& address & ranges) size
caused by more accurately computing the scope - which likely lead to
fewer range entries (more contiguous ranges) & reduced size that way.
All up with these changes I saw minor reductions (-1.21%, -1.77%) in
.rela.debug_ranges and .rela.debug_addr (in a fission, compressed debug
info build) as well as other minor size changes (generally reductinos)
across the board (-1.32% debug_info.dwo, -1.28% debug_loc.dwo). Measured
in an optimized (-O2) build of the clang binary.
If you are investigating a size regression in an optimized debug builds,
this is certainly a patch to look into - and I'd be happy to look into
any major regressions found & see what we can do to address them.
llvm-svn: 340583
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
llvm-svn: 339907
This prevents gold from printing a warning when trying to export
these symbols via the asan dynamic list after ThinLTO promotes them
from private symbols to external symbols with hidden visibility.
Differential Revision: https://reviews.llvm.org/D49498
llvm-svn: 337428
Codeview references to unnamed structs and unions are expected to refer to the
complete type definition instead of a forward reference so Visual Studio can
resolve the type properly.
Differential Revision: https://reviews.llvm.org/D32498
llvm-svn: 334382
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
llvm-svn: 332669
The prefix includes type kind, which is important to preserve. Two
different type leafs can easily have the same interior record contents
as another type.
We ran into this issue in PR37492 where a bitfield type record collided
with a const modifier record. Their contents were bitwise identical, but
their kinds were different.
llvm-svn: 332664
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Before SVN r244158, codeview debug info was emitted always
emitted for msvc if debug info was enabled, but that commit
added a module flag.
Since it's still restricted by the flag, we can allow it
for any target if the user requests it, not only msvc (and
windows-itanium, added in SVN r287567).
Add a test for emitting it for a mingw target.
Differential Revision: https://reviews.llvm.org/D46303
llvm-svn: 331809
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
When emitting CodeView debug information, compiler-generated thunk routines
should be emitted using S_THUNK32 symbols instead of S_GPROC32_ID symbols so
Visual Studio can properly step into the user code. This initial support only
handles standard thunk ordinals.
Differential Revision: https://reviews.llvm.org/D43838
llvm-svn: 330132
Most importantly, we should not replace slashes with backslashes
because that would invalidate the path.
Differential Revision: https://reviews.llvm.org/D45473
llvm-svn: 329838
This patch sorts local variables by lexical scope and emits them inside
an appropriate S_BLOCK32 CodeView symbol.
Differential Revision: https://reviews.llvm.org/D42926
llvm-svn: 327620
Summary:
Local values are constants, global addresses, and stack addresses that
can't be folded into the instruction that uses them. For example, when
storing the address of a global variable into memory, we need to
materialize that address into a register.
FastISel doesn't want to materialize any given local value more than
once, so it generates all local value materialization code at
EmitStartPt, which always dominates the current insertion point. This
allows it to maintain a map of local value registers, and it knows that
the local value area will always dominate the current insertion point.
The downside is that local value instructions are always emitted without
a source location. This is done to prevent jumpy line tables, but it
means that the local value area will be considered part of the previous
statement. Consider this C code:
call1(); // line 1
++global; // line 2
++global; // line 3
call2(&global, &local); // line 4
Today we end up with assembly and line tables like this:
.loc 1 1
callq call1
leaq global(%rip), %rdi
leaq local(%rsp), %rsi
.loc 1 2
addq $1, global(%rip)
.loc 1 3
addq $1, global(%rip)
.loc 1 4
callq call2
The LEA instructions in the local value area have no source location and
are treated as being on line 1. Stepping through the code in a debugger
and correlating it with the assembly won't make much sense, because
these materializations are only required for line 4.
This is actually problematic for the VS debugger "set next statement"
feature, which effectively assumes that there are no registers live
across statement boundaries. By sinking the local value code into the
statement and fixing up the source location, we can make that feature
work. This was filed as https://bugs.llvm.org/show_bug.cgi?id=35975 and
https://crbug.com/793819.
This change is obviously not enough to make this feature work reliably
in all cases, but I felt that it was worth doing anyway because it
usually generates smaller, more comprehensible -O0 code. I measured a
0.12% regression in code generation time with LLC on the sqlite3
amalgamation, so I think this is worth doing.
There are some special cases worth calling out in the commit message:
1. local values materialized for phis
2. local values used by no-op casts
3. dead local value code
Local values can be materialized for phis, and this does not show up as
a vreg use in MachineRegisterInfo. In this case, if there are no other
uses, this patch sinks the value to the first terminator, EH label, or
the end of the BB if nothing else exists.
Local values may also be used by no-op casts, which adds the register to
the RegFixups table. Without reversing the RegFixups map direction, we
don't have enough information to sink these instructions.
Lastly, if the local value register has no other uses, we can delete it.
This comes up when fastisel tries two instruction selection approaches
and the first materializes the value but fails and the second succeeds
without using the local value.
Reviewers: aprantl, dblaikie, qcolombet, MatzeB, vsk, echristo
Subscribers: dotdash, chandlerc, hans, sdardis, amccarth, javed.absar, zturner, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43093
llvm-svn: 327581
Codeview references to unnamed structs and unions are expected to refer to the
complete type definition instead of a forward reference so Visual Studio can
resolve the type properly.
Differential Revision: https://reviews.llvm.org/D32498
llvm-svn: 327397
Summary:
- Emit UdtSourceLine information for enums to match MSVC
- Add a method to add UDTSrcLine and call it for all Class/Struct/Union/Enum
- Update test cases to verify the changes
Reviewers: zturner, llvm-commits, rnk
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D44116
llvm-svn: 326824
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
llvm-svn: 326260
When attempting to compile the following Objective-C++ code with
CodeView debug info:
void (^b)(void) = []() {};
The generated debug metadata contains a structure like the following:
!43 = !DICompositeType(tag: DW_TAG_structure_type, name: "__block_literal_1", scope: !6, file: !6, line: 1, size: 168, elements: !44)
!44 = !{!45, !46, !47, !48, !49, !52}
...
!52 = !DIDerivedType(tag: DW_TAG_member, scope: !6, file: !6, line: 1, baseType: !53, size: 8, offset: 160, flags: DIFlagPublic)
!53 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !54)
!54 = !DICompositeType(tag: DW_TAG_class_type, file: !6, line: 1, flags: DIFlagFwdDecl)
Note that the member node (!52) is unnamed, but rather than pointing to
a DICompositeType directly, it points to a DIDerivedType with tag
DW_TAG_const_type, which then points to the DICompositeType. However,
the CodeView assembly printer currently assumes that the base type for
an unnamed member will always be a DICompositeType, and attempts to
perform that cast, which triggers an assertion failure, since in this
case the base type is actually a DIDerivedType, not a DICompositeType
(and we would have to get the base type of the DIDerivedType to reach
the DICompositeType). I think the debug metadata being generated by the
frontend is correct (or at least plausible), and the CodeView printer
needs to handle this case.
This patch teaches the CodeView printer to unwrap any qualifier types.
The qualifiers are just dropped for now. Ideally, they would be applied
to the added indirect members instead, but this occurs infrequently
enough that adding the logic to handle the qualifiers correctly isn't
worth it for now. A FIXME is added to note this.
Additionally, Reid pointed out that the underlying assumption that an
unnamed member must be a composite type is itself incorrect and may not
hold for all frontends. Therefore, after all qualifiers have been
stripped, check if the resulting type is in fact a DICompositeType and
just return if it isn't, rather than assuming the type and crashing if
that assumption is violated.
Differential Revision: https://reviews.llvm.org/D43803
llvm-svn: 326255
Re-enable commit r323991 now that r325931 has been committed to make
MachineOperand::isRenamable() check more conservative w.r.t. code
changes and opt-in on a per-target basis.
llvm-svn: 326208
This reverts commit r323991.
This commit breaks target that don't model all the register constraints
in TableGen. So far the workaround was to set the
hasExtraXXXRegAllocReq, but it proves that it doesn't cover all the
cases.
For instance, when mutating an instruction (like in the lowering of
COPYs) the isRenamable flag is not properly updated. The same problem
will happen when attaching machine operand from one instruction to
another.
Geoff Berry is working on a fix in https://reviews.llvm.org/D43042.
llvm-svn: 325421
The prologue-end line record must be emitted after the last
instruction that is part of the function frame setup code and before
the instruction that marks the beginning of the function body.
Patch by Carlos Alberto Enciso!
Differential Revision: https://reviews.llvm.org/D41762
llvm-svn: 325143
Instead of reserving 0xF00 bytes for the fixed length portion of the CodeView
symbol name, calculate the actual length of the fixed length portion.
Differential Revision: https://reviews.llvm.org/D42125
llvm-svn: 324850
Increment the field list member count for base classes and virtual base
classes.
Differential Revision: https://reviews.llvm.org/D41874
llvm-svn: 324000
Summary:
This change extends MachineCopyPropagation to do COPY source forwarding
and adds an additional run of the pass to the default pass pipeline just
after register allocation.
This version of this patch uses the newly added
MachineOperand::isRenamable bit to avoid forwarding registers is such a
way as to violate constraints that aren't captured in the
Machine IR (e.g. ABI or ISA constraints).
This change is a continuation of the work started in D30751.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa, tstellar
Subscribers: tpr, mgorny, mcrosier, nhaehnle, nemanjai, jyknight, hfinkel, arsenm, inouehrs, eraman, sdardis, guyblank, fedor.sergeev, aheejin, dschuff, jfb, myatsina, llvm-commits
Differential Revision: https://reviews.llvm.org/D41835
llvm-svn: 323991
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
Summary:
- MSVC uses the none type for a variadic argument in CodeView
- Add a unit test
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D41931
llvm-svn: 322257
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Change the map key from DIFile* to the absolute path string. Computing
the absolute path isn't expensive because we already have a map that
caches the full path keyed on DIFile*.
llvm-svn: 317041
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
llvm-svn: 314821
Reid Kleckner