Add more debug information for peephole optimization passes.
These would only be enabled for debug version binary and could help
analyzing why some optimization opportunities were missed.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327371
This new pass eliminate identical move:
MOV rA, rA
This is particularly possible to happen when sub-register support
enabled. The special type cast insn MOV_32_64 involves different
register class on src (i32) and dst (i64), RA could generate useless
instruction due to this.
This pass also could serve as the bast for further post-RA optimization.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327370
Currently, there is no ALU32 bswap support in eBPF ISA.
BSWAP on i32 was set to EXPAND which would need about eight instructions
for single BSWAP.
It would be more efficient to promote it to i64, then doing BSWAP on i64.
For eBPF programs, most of the promotion are zero extensions which are
likely be elimiated later by peephole optimizations.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327369
This patch relax the subregister definition check on Phi node.
Previously, we just cancel the optimizatoin when the definition is Phi
node while actually we could further check the definitions of incoming
parameters of PHI node.
This helps catch more elimination opportunities.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327368
The current zero extension elimination was restricted to operands of
comparison. It actually could be extended to more cases.
For example:
int *inc_p (int *p, unsigned a)
{
return p + a;
}
'a' will be promoted to i64 during addition, and the zero extension could
be eliminated as well.
For the elimination optimization, it should be much better to start
recognizing the candidate sequence from the SRL instruction instead of J*
instructions.
This patch makes it an generic zero extension elimination pass instead of
one restricted with comparison.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327367
There is a mistake in current code that we "break" out the optimization
when the first operand of J*_RR doesn't qualify the elimination. This
caused some elimination opportunities missed, for example the one in the
testcase.
The code should just fall through to handle the second operand.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327366
The current subregister definition check stops after the MOV_32_64
instruction.
This means we are thinking all the following instruction sequences
are safe to be eliminated:
MOV_32_64 rB, wA
SLL_ri rB, rB, 32
SRL_ri rB, rB, 32
However, this is *not* true. The source subregister wA of MOV_32_64 could
come from a implicit truncation of 64-bit register in which case the high
bits of the 64-bit register is not zeroed, therefore we can't eliminate
above sequence.
For example, for i32_val, we shouldn't do the elimination:
long long bar ();
int foo (int b, int c)
{
unsigned int i32_val = (unsigned int) bar();
if (i32_val < 10)
return b;
else
return c;
}
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327365
Commit e4507fb8c94b ("bpf: disable DwarfUsesRelocationsAcrossSections")
disables MCAsmInfo DwarfUsesRelocationsAcrossSections unconditionally
so that dwarf will not use cross section (between dwarf and symbol table)
relocations. This new debug format enables pahole to dump structures
correctly as libdwarves.so does not have BPF backend support yet.
This new debug format, however, breaks bcc (https://github.com/iovisor/bcc)
source debug output as llvm in-memory Dwarf support has some issues to
handle it. More specifically, with DwarfUsesRelocationsAcrossSections
disabled, JIT compiler does not generate .debug_abbrev and Dwarf
DIE (debug info entry) processing is not happy about this.
This patch introduces a new flag -mattr=dwarfris
(dwarf relocation in section) to disable DwarfUsesRelocationsAcrossSections.
DwarfUsesRelocationsAcrossSections is true by default.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 326505
This pass performs peephole optimizations to cleanup ugly code sequences at
MachineInstruction layer.
Currently, the only optimization in this pass is to eliminate type
promotion
sequences for zero extending 32-bit subregisters to 64-bit registers.
If the compiler could prove the zero extended source come from 32-bit
subregistere then it is safe to erase those promotion sequece, because the
upper half of the underlying 64-bit registers were zeroed implicitly
already.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325991
When -mattr=+alu32 passed to the disassembler, use decoder namespace for
32-bit subregister.
This is to disassemble load and store instructions in preferred B format
as described in previous commit:
w = *(u8 *) (r + off) // BPF_LDX | BPF_B
w = *(u16 *)(r + off) // BPF_LDX | BPF_H
w = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = w // BPF_STX | BPF_B
*(u16 *)(r + off) = w // BPF_STX | BPF_H
*(u32 *)(r + off) = w // BPF_STX | BPF_W
NOTE: all other instructions should still use the default decoder
namespace.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325990
After all those preparation patches, now we could enable 32-bit subregister
support once -mattr=+alu32 specified.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325989
This patch support 32-bit subregister in three InstrInfo hooks, i.e.
copyPhysReg, loadRegFromStackSlot and storeRegToStackSlot,
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325988
The instruction mapping between eBPF/arm64/x86_64 are:
eBPF arm64 x86_64
LD1 BPF_LDX | BPF_B ldrb movzbl
LD2 BPF_LDX | BPF_H ldrh movzwl
LD4 BPF_LDX | BPF_W ldr movl
movzbl/movzwl/movl on x86_64 accept 32-bit sub-register, for example %eax,
the same for ldrb/ldrh on arm64 which accept 32-bit "w" register. And
actually these instructions only accept sub-registers. There is no point
to have LD1/2/4 (unsigned) for 64-bit register, because on these arches,
upper 32-bits are guaranteed to be zeroed by hardware or VM, so load into
the smallest available register class is the best choice for maintaining
type information.
For eBPF we should adopt the same philosophy, to change current
format (A):
r = *(u8 *) (r + off) // BPF_LDX | BPF_B
r = *(u16 *)(r + off) // BPF_LDX | BPF_H
r = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = r // BPF_STX | BPF_B
*(u16 *)(r + off) = r // BPF_STX | BPF_H
*(u32 *)(r + off) = r // BPF_STX | BPF_W
into B:
w = *(u8 *) (r + off) // BPF_LDX | BPF_B
w = *(u16 *)(r + off) // BPF_LDX | BPF_H
w = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = w // BPF_STX | BPF_B
*(u16 *)(r + off) = w // BPF_STX | BPF_H
*(u32 *)(r + off) = w // BPF_STX | BPF_W
There is no change on encoding nor how should they be interpreted,
everything is as it is, load the specified length, write into low bits of
the register then zeroing all remaining high bits.
The only change is their associated register class and how compiler view
them.
Format A still need to be kept, because eBPF LLVM backend doesn't support
sub-registers at default, but once 32-bit subregister is enabled, it should
use format B.
This patch implemented this together with all those necessary extended load
and truncated store patterns.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325987
getScalarShiftAmount method should be implemented for eBPF backend to make
sure shift amount could still get correct type once 32-bit subregisters
support are enabled.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325986
We need to support condition comparison on i32. All these comparisons are
supposed to be combined into BPF_J* instructions which only support i64.
For ISD::BR_CC we need to promote it to i64 first, then do custom lowering.
For ISD::SET_CC, just expand to SELECT_CC like what's been done for i64.
For ISD::SELECT_CC, we also want to do custom lower for i32. However, after
32-bit subregister support enabled, it is possible the comparison operands
are i32 while the selected value are i64, or the comparison operands are
i64 while the selected value are i32. We need to define extra instruction
pattern and support them in custom instruction inserter.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325985
There is no eBPF ISA support for BSWAP, ROTR, ROTL, SREM, SDIVREM, MULHU,
ADDC, ADDE etc on i32.
They could be emulated by other basic BPF_ALU operations, we'd set their
lowering action the same as i64.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325984
This patch add new calling conventions to allow GPR32RegClass as valid
register class for arguments and return types.
New calling convention will only be choosen when -mattr=+alu32 specified.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325983
This new attribute aims to control the enablement of 32-bit subregister
support on eBPF backend.
Name the interface as "alu32" is because we in particular want to enable
the generation of BPF_ALU32 instructions by enable subregister support.
This attribute could be used in the following format with llc:
llc -mtriple=bpf -mattr=[+|-]alu32
It is disabled at default.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325982
For transformations between i32 and i64, if it is explicit signed extension:
- first cast the operand to i64
- then use SLL + SRA to finish the extension.
if it is explicit zero extension:
- first cast the operand to i64
- then use SLL + SRL to finish the extension.
if it is explicit any extension:
- just refer to 64-bit register.
if it is explicit truncation:
- just refer to 32-bit subregister.
NOTE: Some of the zero extension sequences might be unnecessary, they will be
removed by an peephole pass on MachineInstruction layer.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325981
These 32-bit ALU insn patterns which takes immediate as one operand were
initially added to enable AsmParser support, and the AsmMatcher uses "ins"
and "outs" fields to deduct the operand constraint.
However, the instruction selector doesn't work the same as AsmMatcher. The
selector will use the "pattern" field for which we are not setting the
predication for immediate operands correctly.
Without this patch, i32 would eventually means all i32 operands are valid,
both imm and gpr, while these patterns should allow imm only.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325980
markSuperRegs is the canonical helper function used to mark reserved
registers. It could mark any overlapping sub-registers automatically.
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 325979
The pahole does not work with BPF backend properly:
-bash-4.2$ cat test.c
struct test_t {
int a;
int b;
};
int test(struct test_t *s) {
return s->a;
}
-bash-4.2$ clang -g -O2 -target bpf -c test.c
-bash-4.2$ pahole test.o
struct clang version 7.0.0 (trunk 325446) (llvm/trunk 325464) {
clang version 7.0.0 (trunk 325446) (llvm/trunk 325464) clang version 7.0.0 (trunk 325446) (llvm/trunk 325464); /* 0 4 */
clang version 7.0.0 (trunk 325446) (llvm/trunk 325464) clang version 7.0.0 (trunk 325446) (llvm/trunk 325464); /* 4 4 */
/* size: 8, cachelines: 1, members: 2 */
/* last cacheline: 8 bytes */
};
-bash-4.2$
The reason is that BPF backend is not yet implemented in elfutils backend
https://github.com/threatstack/elfutils/tree/master/backends
and pahole depends on elfutils for dwarf parsing and resolving relocation.
More specifically, the unsupported relocation in .debug_info for type/member name
against symbol table caused the incorrect result above. The following is
the raw .rel.debug_info for the above example,
Hex dump of section '.rel.debug_info':
0x00000000 06000000 00000000 0a000000 0b000000 ................
0x00000010 0c000000 00000000 0a000000 01000000 ................
0x00000020 12000000 00000000 0a000000 02000000 ................
0x00000030 16000000 00000000 0a000000 0e000000 ................
0x00000040 1a000000 00000000 0a000000 03000000 ................
----------------- -------- --------
reloc location type symtab index
Hex dump of section '.debug_info':
0x00000000 7b000000 04000000 00000801 00000000 {...............
0x00000010 0c000000 00000000 00000000 00000000 ................
0x00000020 00000000 00001000 00000200 00000000 ................
Based on "type", the proper value will be extracted from symbol table
and filled in .debug_info so later on .debug_info can be properly
resolved against debug strings.
There are two ways to fix this problem. One is to fix elfutils by adding
BPF support which is desirable. This could take a long time and won't work
with already deployed pahole. For a short term workaround, we can disable
dwarf cross-section relation which specifically avoids debug_info and
symbol table cross relocation. This should help any dwarf-related tool
which has not implement BPF specific relocations yet.
Now .rel.debug_info does not have any relocation for symbol table and
.debug_info itself contains necessary relocation information by itself.
Hex dump of section '.debug_info':
0x00000000 7b000000 04000000 00000801 00000000 {...............
0x00000010 0c003700 00000000 00003e00 00000000 ..7.......>.....
0x00000020 00000000 00001000 00000200 00000000 ................
location 0xc has 0, 0x12 has 0x37, 0x1a has 0x3e in place which
will be used in relocation resolution. Here, the values of 0, 0x37 and 0x3e
are offset in .debug_str section.
Please note the difference between two above .debug_info dumps.
With the fix, pahole works properly with BPF backend:
-bash-4.2$ clang -O2 -g -target bpf -c test.c
-bash-4.2$ pahole test.o
struct test_t {
int a; /* 0 4 */
int b; /* 4 4 */
/* size: 8, cachelines: 1, members: 2 */
/* last cacheline: 8 bytes */
};
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325735
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Yonghong Song
llvm-svn: 325457
The reference '&' is missing in the function parameter. If there are
back-to-back optimizations in terms of dag node list like below:
t29: i64,ch = load<LD4[bitcast (%struct.test_t* @test.t to i8*)+12](dereferenceable), zext from i32> t3, t43, undef:i64
t34: i64,ch = load<LD4[bitcast (%struct.test_t* @test.t to i8*)](dereferenceable), zext from i32> t3, t41, undef:i64
The bug will trigger a segfault for the added test case remove_truncate_5.ll:
LLVMSymbolizer: error reading file: No such file or directory
#0 0x000000000241c4d9 (llc+0x241c4d9)
#1 0x000000000241c56a (llc+0x241c56a)
#2 0x000000000241aa50 (llc+0x241aa50)
...
#22 0x0000000000fd5edf (llc+0xfd5edf)
#23 0x00007f0fe03bec05 __libc_start_main (/lib64/libc.so.6+0x21c05)
#24 0x0000000000fd3e69 (llc+0xfd3e69)
...
Segmentation fault
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325267
LowerSELECT_CC is not generating optimal Select_Ri pattern at the moment. It
is not guaranteed to place ConstantNode at RHS which would miss matching
Select_Ri.
A new testcase added into the existing select_ri.ll, also there is an
existing case in cmp.ll which would be improved to use Select_Ri after this
patch, it is adjusted accordingly.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 324560
Previously some targets printed their own message at the start of Select to indicate what they were selecting. For the targets that didn't, it means there was no print of the root node before any custom handling in the target executed. So if the target did something custom and never called SelectNodeCommon, no print would be made. For the targets that did print a message in Select, if they didn't custom handle a node SelectNodeCommon would reprint the root node before walking the isel table.
It seems better to just print the message before the call to Select so all targets behave the same. And then remove the root node printing from SelectNodeCommon and just leave a message that says we're starting the table search.
There were also some oddities in blank line behavior. Usually due to a \n after a call to SelectionDAGNode::dump which already inserted a new line.
llvm-svn: 323551
These pseudos are not supposed to be visible to user.
This patch reduced the auto-generated instruction matcher. For example,
the following words are removed from keyword list of LLVM BPF assembler.
- MCK__35_, // '#'
- MCK__COLON_, // ':'
- MCK__63_, // '?'
- MCK_ADJCALLSTACKDOWN, // 'ADJCALLSTACKDOWN'
- MCK_ADJCALLSTACKUP, // 'ADJCALLSTACKUP'
- MCK_PSEUDO, // 'PSEUDO'
- MCK_Select, // 'Select'
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 322535
As commented on the existing code:
// The Reg operand should be a virtual register, which is defined
// outside the current basic block. DAG combiner has done a pretty
// good job in removing truncating inside a single basic block.
However, when the Reg operand comes from bpf_load_[byte | half | word]
intrinsics, the generic optimizer doesn't understand their results are
zero extended, so these single basic block elimination opportunities were
missed.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 322534
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Add support for 'objdump -print-imm-hex' for imm64, operand imm
and branch target. If user programs encode immediate values
as hex numbers, such an option will make it easy to correlate
asm insns with source code. This option also makes it easy
to correlate imm values with insn encoding.
There is one changed behavior in this patch. In old way, we
print the 64bit imm as u64:
O << (uint64_t)Op.getImm();
and the new way is:
O << formatImm(Op.getImm());
The formatImm is defined in llvm/MC/MCInstPrinter.h as
format_object<int64_t> formatImm(int64_t Value)
So the new way to print 64bit imm is i64 type.
If a 64bit value has the highest bit set, the old way
will print the value as a positive value and the
new way will print as a negative value. The new way
is consistent with x86_64.
For the code (see the test program):
...
if (a == 0xABCDABCDabcdabcdULL)
...
x86_64 objdump, with and without -print-imm-hex, looks like:
48 b8 cd ab cd ab cd ab cd ab movabsq $-6067004223159161907, %rax
48 b8 cd ab cd ab cd ab cd ab movabsq $-0x5432543254325433, %rax
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 321215
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
llvm-svn: 319445
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
kernel verifier is becoming smarter and soon will support
direct and indirect function calls.
Remove obsolete error from BPF backend.
Make call to use PCRel_4 fixup.
'bpf to bpf' calls are distinguished from 'bpf to kernel' calls
by insn->src_reg == BPF_PSEUDO_CALL == 1 which is used as relocation
indicator similar to ld_imm64->src_reg == BPF_PSEUDO_MAP_FD == 1
The actual 'call' instruction remains the same for both
'bpf to kernel' and 'bpf to bpf' calls.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318614
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Add hook in BPF backend so that llvm-objdump can print out
the jmp target with label names, e.g.,
...
if r1 != 2 goto 6 <LBB0_2>
...
goto 7 <LBB0_4>
...
LBB0_2:
...
LBB0_4:
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318358
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
In BPF backend, we try to optimize away redundant
trunc operations so that kernel verifier rewrite
remains valid. Previous implementation only works
for a single function.
This patch fixed the issue for multiple functions.
It clears internal map data structure before
performing optimization for each function.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 316469
We came across an llvm bug when compiling some testcases that 64-bit
immediates are silently truncated into 32-bit and then packed into
BPF_JMP | BPF_K encoding. This caused comparison with wrong value.
This bug looks to be introduced by r308080. The Select_Ri pattern is
supposed to be lowered into J*_Ri while the latter only support 32-bit
immediate encoding, therefore Select_Ri should have similar immediate
predicate check as what J*_Ri are doing.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 315889
Reverting to investigate layering effects of MCJIT not linking
libCodeGen but using TargetMachine::getNameWithPrefix() breaking the
lldb bots.
This reverts commit r315633.
llvm-svn: 315637
Merge LLVMTargetMachine into TargetMachine.
- There is no in-tree target anymore that just implements TargetMachine
but not LLVMTargetMachine.
- It should still be possible to stub out all the various functions in
case a target does not want to use lib/CodeGen
- This simplifies the code and avoids methods ending up in the wrong
interface.
Differential Revision: https://reviews.llvm.org/D38489
llvm-svn: 315633
David Blaikie